Panel dividing saw Format4

Format4 Kappa Automatic 80

Condition: used, Year of construction: 2020, machine/vehicle number: 30.04.004.20, functionality: fully functional, power: 14 kW (19.03 HP), Format4 kappa automatic 80, industrial panel sizing saw for cutting/sizing wood panel materials Details Format4 kappa automatic 80 Panel sizing saw for cutting/sizing wood panel materials Year of manufacture: April 2020 Serial number: 30.04.004.20 Cutting length: 3,200 mm Cutting depth: 3,200 mm Cutting height: 80 mm (package clamp opening: 75 mm) Saw blade: 320 mm Scoring saw blade: 150 mm with 1.1 kW motor 8 package clamps 24-inch touchscreen Label printer Electric cutting height adjustment Clean-cut device Side pressure device: 20–1,200 mm 3 air cushion tables: 2,300 x 600 mm Electrical Data V: 400 PH: 3 HZ: 50 A: 36 Bdjdpfj Afw H Hox Airoi kW: 14.0 Dimensions and Weight Length: 660 cm Width: 540 cm Height: approx. 160 cm (detailed dimensions shown in the photos) Weight: approx. 4,400 kg Other Various saw blades included Condition: Used Pallets included The machine has already been disassembled and is ready for transport. The first photo is a stock photo.

Condition: used, machine/vehicle number: 008350, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: PUR, Hot Air Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 20 m/min Maximum panel thickness: 60 mm Bjdjx A Tgyjpfx Airsdi Operating Units: 7 nr

Condition: used, Year of construction: 2025, functionality: fully functional, Equipment: CE marking, Holz-Her Edgebanding Machine SPRINT 1329 Multi with motorized pressure beam Bdodezx Ennepfx Airsi PUR & EVA adhesive (up to 60mm) with the NEW GLU JET GJ725 PUR PRO including vacuum pump motorized infeed guide rail guide for narrow parts edge trimming IntelliSet - tool correction fa.s.t. - setup in the gap + remaining length display of the edge band roll iTronic - pressure & adhesive quantity control automatic chain lubrication second workpiece discharge + air cushion table in the infeed area fully motorized equipment for all units multifunction milling - radius 1.3mm (2x) & 2mm (2x) + nesting package, vertical, bottom spraying devices + padding unit with texture finish for normal applications and structured surfaces and more The machine is currently being refurbished at the factory in Voitsberg / Austria. Completion: approximately October / November 2026 Delivery, installation and training for the machine can be arranged directly through us for an additional fee. The machine is currently located in our delivery warehouse in Gratwein / Austria. In the event of discrepancies between the German version and a foreign language version, only the German version shall be binding. Our terms and conditions can be found on our website at holzher.de/de/agb.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Edgebander BIESSE Akron 1440A Availability: April/May 2026 Bdedpfxjyh A I Ae Airei CE certificate Year of manufacture: 2017 Possibility to inspect the machine before purchase

Condition: as good as new (ex-display), Year of construction: 2026, CNC Machining Centers Rover Multi Up M C S Working Area*: X = 3280 mm; Y = from 1580 to 1660 mm, depending on work conditions Z = 200 mm – 5-axis machining unit and drilling unit, with vacuum modules H = 74 mm Z = 245 mm – 5-axis machining unit and drilling unit, with vacuum modules H = 29 mm Workpiece Clearance*: Y = 1900 mm Axis Travel*: X = 3706 mm; Y = 2294 mm; Z1 = 515 mm; Z2 = 371 mm VACUUM SYSTEM Subdivision of the vacuum system into 2 working zones and 2 clamping zones in X. AUXILIARY VACUUM SYSTEM – 2 zones Allows clamping of workpieces using vacuum templates. Remote Control RM850 Rover Multi Up M C S Panel – Multi Purpose Regular Configuration 2 Compatible with the turret tool magazine with 16 positions and the side tool magazine with 12 positions. The tool magazines can also be retrofitted. Uninterruptible Power Supply (UPS) for machine PC. 6 ATS workpiece supports – 18 module carriers — 6 aluminium workpiece supports. The positioning of the workpiece supports is via linear guides with ball bearing slider blocks. Clamping is performed on the front and rear linear guides via pneumatic cylinders. Clamping is released by a push button located at the front of the workpiece support. — 18 module carriers, 132 x 132 x H 41.5 mm, with independent pneumatic clamping. The vacuum modules can be rotated in 15° increments on the module carriers; an ideal solution for shaped parts. — 18 covers for module carriers without template. SA (Set-Up Assistant) working table for tables up to 1550 mm. Supported manual positioning system with motion direction indicator and position indicator. — Sensors on each working table and along the X-axis of the working area. — Display of direction and position achieved for the carriage during positioning phase, mounted on each working table. According to the programmed configuration of the working tables, the system indicates the direction of movement for each working table and carriage, and confirms with a green LED and audible signal when the correct position is reached, with a tolerance of +/- 1.5 mm. Subdivision of the pneumatic system into 2 working areas in X. Machining unit with 5 interpolating axes, 13 kWp (17.4 HP), with HSK F63 adapter, liquid-cooled – 20,000 rpm Extraction hood with 12 NC-controlled positions for the 5-axis electrospindle. Flange for preparation of a 5-axis interpolating machining unit for mounting aggregates. Coolant system Additional Z-axis carrier for rear machining units, with independent Z-axis. Drilling head BH 24 L Side tool magazine with 12 positions, integrated into the machine bed. Turret tool magazine with 16 positions, installed directly on the X machining unit. HSK F63 tool adapter, equipped with a long integrated flange, for saw blades on the 5-axis head. Saw blade 300 mm, for tool holder. Hi-Tech tool set Complete set of tools for the acceptance test Consisting of the following 9 parts Replacement of standard PC with a high-performance PC. Digital device for measuring tool length up to 130 mm diameter. bSolid NC-HOPS 8 MacroCAM Rover 1. AV NC-HOPS MacroCAM 1. License WorkCenter suction cup proposal 5-Axis Simultaneous Material removal simulation 12-month warranty period Bodpfxoy Ehrxs Airedi Location: ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2009, machine/vehicle number: 241.125, functionality: fully functional, Horizontal Beamsaw of the manufacturer Schelling, designed for cutting wood-based material HPO – cutting optimization program Bdsdox Ebzdepfx Airji Saw blade projection: max. 95 mm Saw carriage feed up to 120 m/min Cutting lengths: Model FH 4 430 - 4.300 mm Can be inspected in working condition until beginning 2026. (dismantling planned) Maximum Saw blade Diameter - 350 mm Projection - 95 mm Clamp opening 90 mm Power Saw motor - 15 kW Scorer Diameter 300 mm Feed rate forward up to 80 m/min reverse 80 m/min Saw feed rate forward up to 120 m/min reverse 120 m/min

Condition: used, Year of construction: 2021, operating hours: 489 h, Homag EDGETEQ 300 The machine will be available from approximately the end of December 2026. Bedpfx Aoz D U A Asirsdi For further information about the machine, please see the images or feel free to request it.

Condition: used, Year of construction: 2008, Panel dividing saw Manufacturer: Holzma Type: HPP 350/43/38 Year of manufacture: 2008 Technical data - Control system: CADmatic 4 - Optimization program: CAD-Plan 4 - Saw blade overhang: 80 mm - Saw carriage feed rate forward/backward: 1-150 m/min / 150 m/min - Feed rate of the program cut forward/backward: 90 m/min / 90 m/min - Main saw motor: 13.5 kW - Scoring saw motor: 2.2 kW - Working height: 920 mm - Main saw blade: 350 x 4.4 x 60 mm - Scoring saw blade: 180 x 4.4 - 5.4 x 45 mm - Cutting length: 4300 mm Bdedpfx Aiozuy N Eorsi - Cutting width: 3700 mm - Label printer Pica 108 - Processing package for gypsum fiberboards - Annual maintenance and inspection by Homag - New PC in 2021 (Win10) and updated machine control software and CadLink Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Year of construction: 2018, operating hours: 100 h, condition: as good as new (ex-display), Klieverik laminating calender with few operating hours. Approx. 100h. The machine can be inspected on site. Condition as new. The machine has never been in serial production. Bdsdpfx Aiohd N Daeroi Sale from place.

Condition: new, Scoring unit , kW Dimensions (L/W/H) , mm machine weight ab. , kg Bsdpfx Asxmk Ebeirjdi Masterwood MasterSaw Solid pressure beam saw with full features ----- Manufacturer's description: The MasterSaw pressure beam saws feature the following features: - Air-jetted cutting line - Height-controlled pressure beam - Controlled sawblade projection - 3 or 4 air-cushion tables, adjustable middle tables - Loading and unloading rollers at the end of the tables - 15 kW main saw motor (MS 430 L: 18.5 kW) - Scoring unit adjustable horizontally and vertically from the control panel - Masterlock quick-change system for sawblade changes - Saw carriage travel: 110 m/min, forward travel: max. 95 m/min - Pusher travel: return travel: max. 95 m/min - Machine weight: 6 t or 6.8 t - 8 or 10 double-finger clamps as standard - Double-roller side aligner - Intuitive machine software with graphical user guidance - Stress-relieving cut - Post-cutting option (nesting) - Front and rear cleaning flaps ----- MasterSaw Series Features: MasterSaw 320 - Outstanding Value for Money - Cutting Length 3,200 mm - 3 Air Cushion Tables, Adjustable Middle Table - 6 t Machine Weight MasterSaw 430 - Industry Standard for the Woodworker - Cutting Length 4,300 mm - 4 Air Cushion Tables, Adjustable Middle Table - 6.8 t Machine Weight MasterSaw 320/430 Features in Detail: - Saw Unit with Automatic Adjustment for Optimal Saw Blade Overhang - Scoring Saw Unit with 200 mm Saw Blade for Tear-Free Cuts at High Feed Speed - The saw unit is driven by a servo motor and a rack and pinion drive - The pneumatic pressure beam is always positioned parallel to the work table using a rack and pinion drive - The opening height of the pressure beam is monitored by the intelligent control system, ensuring The shortest cutting cycles are achieved. - Double-roller side aligner positions the panel strips in front of and behind the cutting line. - Material pusher with 8 (MS 320) or 10 (MS 430) double-finger clamps. Technical specifications MasterSaw 320/430: - Max. panel dimensions MS 320: 3,200 x 3,100 mm - Max. panel dimensions MS 430: 4,300 x 4,300 mm - Saw blade diameter: 400 mm - Cutting thicknesses up to 90 mm - Saw motor power: 15 kW - Scoring saw motor power: 1.5 kW - Feed speeds: up to 95 m/min in sawing mode - up to 110 m/min in reverse mode - Smallest finished workpiece: 34 x 45 mm - Weight: 6 t (MS 320) or 6.8 t (MS 430) - Dimensions MS 320: 5,556 x 6,646 x 1,890 mm (L x W x H) - Dimensions MS 430: 6,556 x 7,775 x 1,890 mm (L x W x H) - CE safety guard ----- Features of the MasterSaw Series: MasterSaw 430 L - Lifting table machine with 120 mm cutting height The solution for high productivity The MasterSaw 430 L features a lifting table loading system from the rear. Thanks to its 120 mm cutting height, it is also ideal for series production. Features and technical data of the MasterSaw 430 L - 4 t panel stack with a maximum stack thickness of 500 mm (900 mm in a pit on request) - Saw blade diameter: 450 mm - Cutting thicknesses up to 120 mm - Saw motor power: 18.5 kW - CE safety guard ----- Useful options if required: - Professional optimization software Optimization software including import of lists of up to 10,000 parts, management of panels available in sto...