Milling machine

Fräsmaschine WM20

Condition: used, Year of construction: 1990, Universal tool milling machine Make: MACMON Fpsdpfx Afox Ada Rjpji Model: M 100 E Year of manufacture: 1990 – workshop tested Machine No.: 1479 Geometrical inspection with test protocol Accessories: - 3-axis digital readout K+C Arbah-M, new - Fixed table 600 x 210 mm (T-slot: 12 mm) - Vertical milling head SK 40 with draw thread S 20 x 2 - Coolant system - Operating manual Used as seen, without warranty The machine conforms technically to the state of the art at the year of manufacture.

Condition: good (used), Magnetic table 455 x 170 mm digital display Fsdpfx Afetu Il Tepepi water tank Honing device Wet sanding device

Year of construction: 1980, condition: good (used), A used, very well-maintained cycle-controlled lathe from Weisser Heilbronn with a SIEMENS control system. Distance between centers 2000 mm Center height 295 mm Swinging diameter over bed 600 mm Swinging diameter over cross slide 260 mm Swinging diameter in the crotch 800 mm Total length of the crotch 375 mm Bed width 450 mm Travel of X-axis 350 mm Travel of Z-axis 1850 mm Spindle nose DIN 55022, size 8 Spindle speed, number 18, 14 – 1400 rpm Spindle bore 71.5 mm Diameter of front bearing 110 mm Fjdpfxegyy I Ao Afpopi Feed range 0.01 – 40.95 mm/rev Rapid traverse 8 m/min DC drive 15 kW 400V 50Hz Max. permissible torque on the spindle 2500 Nm Tailstock quill 80 mm Quill stroke 250 mm Internal taper in quill MK 5 Length x width x height Machine weight 5500 kg Accessories: Tailstock Pneumatic three-jaw chuck with replaceable jaws, 315 mm Quick-change tool holder "MULTIFIX" in front of the center, size "C" Four-position turret behind the center Tool holder Coolant system Follow rest, pneumatically actuated Technical data and dimensions: Subject to change without notice. Video conference via WhatsApp possible after scheduling an appointment.

Condition: used, Year of construction: 2000, Year of manufacture: 2000 Control: Mazatrol 640 Documents included Chip conveyor TECHNICAL DATA – MAZAK INTEGREX 200SY Performance / Capacity Max. swing: Ø 540 mm Chuck size: 8" Max. machining diameter: Ø 540 mm Max. machining length: 1018 mm Max. outside diameter for bar material: Ø 51 mm Main spindle Spindle nose: JIS A2-6" Spindle bore diameter: Ø 61 mm Spindle speed: 35 – 5000 rpm (Standard) / 35 – 4500 rpm (Option: 5000)* Motor power (30 min. rating): 22 kW (18.5 kW*) Max. torque: 350 Nm (35.7 kgf·m) Sub spindle (counter spindle) Spindle nose: JIS A2-6" Spindle bore diameter: Ø 44 mm Spindle speed: 35 – 5000 rpm Motor power (10 min. rating): 7.5 kW Max. torque: 57 Nm (5.8 kgf·m) Turret / Tool data Turret type: With ATC, spindle turret External turning tool size: □ 25 mm Internal turning tool size: Ø 40 mm Milling tool: Max. Ø120 × 250 mm length Indexing time (90°): 0.5 s Milling spindle speed: 15 – 6000 rpm (Option: 10000) Milling spindle motor power: 7.5 kW Max. milling spindle torque: 62.29 Nm (6.35 kgf·m) Feed axes X-axis: Travel 530 mm / Rapid traverse 30,000 mm/min Z-axis: Travel 1065 mm / Rapid traverse 33,000 mm/min Y-axis: Travel 140 mm / Rapid traverse 15,000 mm/min Z2-axis: Travel 1005 mm / Rapid traverse 20,000 mm/min Media / Control Coolant tank volume: 250 L Power consumption (continuous): 32.7 kVA Machine dimensions / Weight Overall length: 3485 mm Overall width: 2105 mm Overall height: 2416 mm Fsdpfxeyh E Irs Afpopi Weight: 73,575 N (7,500 kgf)

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, input voltage: 400 V, travel distance X-axis: 760 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 570 mm, workpiece height (max.): 520 mm, workpiece weight (max.): 300 kg, number of slots in tool magazine: 34, total height: 2,935 mm, total length: 3,600 mm, total width: 3,700 mm, table width: 860 mm, controller model: FANUC, coolant supply: 12 bar, distance table center to spindle nose: 780 mm, spindle motor power: 15 W, rapid traverse Z-axis: 40 m/min, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, spindle nose: ISO 40, spindle speed (max.): 10,000 rpm, spindle speed (min.): 80 rpm, table height: 560 mm, table load: 300 kg, tool diameter: 80 mm, tool length: 300 mm, tool weight: 8 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Vertical machining center with automatic pallet changer "DOOSAN mod. VC500" with CNC Fanuc 21i-MB Fpodpfxou T Hg Te Afpsi

Condition: good (used), Year of construction: 2000, functionality: fully functional, CNC lathe, HITACHI SEIKI, type HT 23-RIII, year 2000 SEICOS L MULTI DIALOG control system. Maximum turning diameter: 450 mm Maximum turning length: 630 mm Tool turret with 12 positions VDI 40 Chuck diameter: 250 mm Spindle bore: 78 mm Spindle speeds: 30-4000 rpm Rapid traverse: X and Z 30 m/min Chip conveyor. For further information, see data sheets. The machine is in good condition and can be demonstrated under power. Fpjdpfx Asv T Un Djfpoi Machine documentation is available.

Condition: good (used), Year of construction: 2001, Mori Seiki SV-500/50 4 Axis Vertical Machining Centre with Mori Seiki MSC-501 CNC Control, Table Size 1100mm x 600mm, 40 Tool ATC, BT50 Spindle Taper, Cool Jet 70 - 30 DF High Pressure, Coolant Filtration Unit, Filtermist FX7002 Oil Mist Extractor, Spindle Speed Max 6000rpm, Renishaw Tool Probe Eye, Machine Weight 7800kg. S/No. 1864 Includes Various BT50 Spindle Tool Holders in ATC and Boxes Fpodpfxox Nap Ds Afpsi

Condition: used, Year of construction: 2015, turning diameter 210 mm turning length 1000 mm control Fanuc 31i max. turning speeds 5.000 min/-1 drive capacity - main spindle 15 kW max. torque 476 Nm bar passage 65 mm Fpodsxq R Evopfx Afpsi x-axis 250 mm z-axis 1050 mm x2-axis 150 mm z2-axis 1030 mm spindle hours ca. 700 h accessories: Lünette, Späneförderer In our opinion, the machine is in very good used condition and can be inspected under power by appointment. Technical details: - approx. 500 spindle hours Accessories: - Steady rest - Chip conveyor Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: excellent (used), With Sub-spindle With C-axis, with Y-axis With driven tools FANUC/MORI MSX 501 control Turning diameter max 190 mm Fodox I A Awopfx Afpopi Turning length -235 mm Spindle speeds 50-5'000 rpm Top turret tool holders 1+2 with 16 driven positions Bar loader FMB Turbo 8-80 Workpiece pick-up device Tool presetting device Misc. accessories MARCELS MASCHINEN CH

Condition: new, Year of construction: 2026, Electric Pallet Truck 1500 kg – A Modern Solution for Internal Transport The CORMAK electric pallet truck, also known as an electric pallet jack, powered warehouse trolley, or electric pallet mover, is an essential device in any warehouse, store, wholesale outlet, or production facility. This model, with a 1500 kg load capacity, combines compact dimensions with high power and efficiency, ensuring fast and safe pallet transport over short and medium distances. With both electric drive and lifting, this pallet truck eliminates the need for manual pumping and pushing, significantly improving workplace ergonomics. It is ideal for environments where precision, quiet operation, and maximum productivity are essential. Modern 24V 20Ah Lithium-Ion Battery The 24V 20Ah lithium-ion battery offers long service life, short charging time, and requires no maintenance. Unlike traditional lead-acid batteries, Li-Ion cells allow for quick recharging at any time of day without the risk of shortening battery lifespan. As a result, the truck is always ready to work. The side-mounted battery further enhances the unit’s durability. This design effectively protects the battery from moisture, dust, and weather conditions, which is especially important when working in cold storage, loading docks, or open warehouse areas. Fpedpfoxphq Hjx Afpei The fully metal construction ensures exceptional resistance to mechanical damage. Its robust steel frame makes it perfect for tough working conditions – on construction sites, in workshops, or industrial plants where durability and safety are key. Key Features of the Pallet Truck Electric drive and lifting – minimal operator effort 1500 kg load capacity – ideal for most standard pallets 24V 20Ah lithium-ion battery – fast charging, long-lasting operation Side battery installation – better protection and easier maintenance All-metal construction – durability in harsh environments Compact and maneuverable design – excellent handling in narrow aisles Low noise and zero emissions – eco-friendly alternative to combustion-powered models Electric Pallet Jack for Warehouses, Stores, and Production Facilities This 1500 kg electric pallet jack is the perfect balance of performance and reliability. It’s ideal wherever work efficiency and operator safety are priorities. Whether you're looking for an electric-powered pallet truck, a warehouse trolley with drive, or an automatic pallet mover, this model offers maximum ease of use and low operating costs. Technical Specifications Specification Value Model Q15-4 Load capacity 1500 kg Fork height (raised) 200 mm Fork height (lowered) 85 mm Overall length 1670 mm Fork length 1150 mm Width 560 mm Minimum aisle width 1920 mm Turning radius 1480 mm Driving speed (with/without load) 3.8 / 4.2 km/h Max gradeability (with/without load) 2 / 6 % Drive motor power 0.75 kW Battery 24 V / 20 Ah Net weight 131 kg