Dowel boring machine

Gannomat Optima 21/510

Condition: used, Year of construction: 2024, DOWEL HOLE DRILLING MACHINE GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW, complete in standard design with: - Fully automatic electronic control with pulse operation via foot valve for clamping-drilling-releasing, electric intermittent operation. - Automatic retraction of the drilling unit after reaching the set drilling depth. - Automatic extension of the drilling hole depth when drilling on the end face. This eliminates the need to adjust the drilling hole depth from flat-face to end-face drilling (+10 mm, e.g. for a dowel length of 35 mm, drilling depth on the flat face 14 mm and drilling depth on the end face 24 mm). - 1 drilling bar with 21 spindles, pitch 32 mm, motor 1.5 kW (drilling feed 0-70 mm), incl. 21 quick-change chucks (Ganner system) for easy changing of the drill bits. - Easy pivoting of the drilling unit from 0° to 90°, supported by gas cylinders. - 1 clamping support movable in the Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. Ideal stop system consisting of: - 1 stop rail 1800 mm for drilling shelves (aluminum profile 40x40 mm) with 3 stop blocks, with quick-change system, easily interchangeable from right to left stop side for drilling shelves in carcass structures in mirrored fashion, also suitable for row drilling in the 32 system. - Side stops and position settings, as well as the position of the drilling height above the support table, are adjusted by means of mechanical digital counters. - Side stops can be easily pivoted away, for the shortest possible conversion from carcass to frame and row drilling. - Clamping arms for the clamping support designed for row drilling positions up to max. 300 mm. - Ideal three-stage tool system. - 1 set of drill bits for dowels: - 5 carbide dowel drill bits, Ø 8x77 mm, right-hand - 4 carbide dowel drill bits, Ø 8x77 mm, left-hand Basic machine DOWEL HOLE DRILLING MACHINE GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW, complete in standard design with: - Fully automatic electronic control with pulse operation via foot valve for clamping-drilling-releasing, electric intermittent operation. - Automatic retraction of the drilling unit after reaching the set drilling depth. - Automatic extension of the drilling hole depth when drilling on the end face. This eliminates the need to adjust the drilling hole depth from flat-face to end-face drilling (+10 mm, e.g. for a dowel length of 35 mm, drilling depth on the flat face 14 mm and drilling depth on the end face 24 mm). - 1 drilling bar with 21 spindles, pitch 32 mm, motor 1.5 kW (drilling feed 0-70 mm), incl. 21 quick-change chucks (Ganner system) for easy changing of the drill bits. - Easy pivoting of the drilling unit from 0° to 90°, supported by gas cylinders. - 1 clamping support movable in the Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. - Ideal stop system consisting of: - 1 stop rail 1800 mm for drilling shelves (aluminum profile 40x40 mm) with 3 stop blocks, with quick-change system, easily interchangeable from right to left stop side for drilling shelves in carcass structures in mirrored fashion, also suitable for row drilling in the 32 system. - Side stops and position settings, as well as the position of the drilling height above the support table, are adjusted by means of mechanical digital counters. - Side stops can be easily pivoted away, for the shortest possible conversion from carcass to frame and row drilling. - Clamping arms for the clamping support des Lsdpjxnlflsfx An Ierp

Condition: used, machine/vehicle number: 007227, Position 1: Single Edgebanders HOMAG + LIGMATECH-KAL 310 + ZHR 05 Position 2: Panel Return Systems HOMAG + LIGMATECH-KAL 310 + ZHR 05 Lsdpjwuuc Ajfx An Ijrp

Condition: excellent (used), Year of construction: 2022,

Condition: used, Year of construction: 2016, total length: 6,400 mm, total width: 1,500 mm, total height: 1,700 mm, Price: On request - Year: 2016 - Documentation available: No - CE certificate present: No - Max. cutting length [mm]: 3200 - Min. saw blade diameter [mm]: 300 - Max. saw blade diameter [mm]: 350 - Arbor saw blade diameter [mm]: 30 - Dust extraction nozzle diameter [mm]: 120 - Spindle speed: - └ Max. spindle speed [rpm]: 4000 - Voltage [V]: 400 - Current consumption [A]: 18.5 - Fuse [A]: 25 - Transport dimensions: 6400mm x 1500mm x 1700mm (l x w x h) - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels Lodpeyvh Rvofx An Iorp

Condition: ready for operation (used), Year of construction: 2017, operating hours: 24,140 h, overall weight: 10,000 kg, controller manufacturer: FANUC, controller model: 31i-NT-SmartX, number of axes: 9, This 9-axis Nakamura NTJ100 turn-mill centre was manufactured in 2017, featuring a bar capacity up to 65 mm and dual spindles with maximum speeds of 4500 and 5000 rpm respectively. It includes a Samsys bar loader, Absolent extraction system, and a variety of automated features such as coolant supply through the spindle, parts catcher, and automatic tool setting devices. Consider the opportunity to buy this Nakamura NTJ100 turn-mill centre. Contact us for more information about this machine. • Increased bar capacity: 65 mm left, 51 mm right • Workpiece measurement: han-bei measuring probe for automatic workpiece measurement (infrared or radio type) for left and right spindle • Left + right, with auto swing-in type and 2x 4 measuring directions for quick and precise tool setting via the nc function. • Operating time 43399h • Coolant system: coolant through spindle (CTS); coolant float switch for machine stop on low level; additional coolant flushing via the spindle (left and right) • Bar capacity: Ø 51 mm • Parts catcher type A with collecting tray, max. Ø 65 x 150 mm, 3.0 kg, spindle side, left, with plastic lining • Chuck blow-out device for left spindle • Automatic power shut-off • Preparation for oil mist extraction system with connection nozzle Ø 150 mm • Robot/automation prep: pneumatic flap for robot handling on top of the door, opening approx. 400 x 400 mm • Handwheel for manual tracking of defined contours • Data server with 1 GB ATA memory card • Interface for KNOLL system • Triple signal lightSamsys bar loader with a 1.5 m bar loading capacity has the following dimensions: Length: 225 cm + 43 cm intermediate guide Width: 120 cm (including loading ramp and control panel) Height: 145 cm or 180 cm with the flap openThe machine was mainly used to process aluminium (95%). Additional equipment Ljdpex D Iuzjfx An Iorp • Samsys bar loader, including extension • Absolent extraction system • Slat-belt chip conveyor with interface, time-interval control, and alarm evaluation

Condition: excellent (used), Year of construction: 2007, turning length: 744 mm, turning diameter: 430 mm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, Control: CNC path control with 10.4" TFT color display Siemens Sinumerik 840 D powerline TECHNICAL DATA Turning diameter *over bed 600 mm *over cross slide 500 mm Distance between main spindle and counter spindle 975 mm Maximum turning diameter 430 mm Maximum turning length 744 mm Maximum bar diameter 65 mm Workpiece size with counter spindle max. ø 200 x 200 mm Main spindle Drive power 29 kW Speed range 0 – 5000 rpm Maximum bar passage 65 mm Maximum chuck size 200 mm C-axis *Resolution 0.001° Counter spindle Drive power (100/40% ED) 17/22 kW Speed range 0 – 5000 rpm Maximum chuck size 200 mm Travel (Z-axis) 750 mm C-axis*Resolution 0.001° Upper tool holder Disc turret with direction logic Number of stations 12 of which driven 12 Tool holder DIN 69880 VDI 30 Drive power 6.7 kW Speed range 0- 4000 rpm Travel *X-axis 270 mm *Z-axis 750 mm *Y-axis + 50 mm Lower tool holder Disc turret with direction logic Number of stations 12 of which driven 12 Tool holder DIN 69880 VDI 30 Drive power 6.7 kW Speed range 0- 4000 rpm Travel *X-axis 205 mm *Z-axis 750 mm EQUIPMENT/ACCESSORIES  Full enclosure with electrical interlock and sliding doors and machine light  Bar loader magazine IEMCA TAL/Auto 65/32 for bar length 3000 mm including: -Guide channel -Centering device -Axial displacement  Thermal compensation systems for the integrated spindle motors (liquid-cooled)  Hydraulic cylinder with draw tube for main spindle  Hydraulic cylinder with draw rod for counter spindle  C-axes for main and counter spindle  Transmit software for easy C-axis programming  Y-axis in the upper turret (cutting force distribution on 2 axes, resulting in extremely high rigidity)  Drive unit in the upper and lower turret Ledpfx Aoyx U Hion Isrp  Part ejector and flushing through the counter spindle  Part removal device for the finished parts Finished part max. ø 65 x 200 mm Finished part weight max. 4.5 kg  Conveyor belt for removing the finished parts from the machine  Turret steady rest including VDI 30 base mounted above the coolant supply (14 bar) centrally in the tool turret Diameter range 10 – 70 mm  Coolant system with 2 high-pressure pumps at 14 bar each and 2 flushing pumps at 3.7 bar each  Cleaning gun for cleaning the clamping devices, covers and the entire working area with coolant  Chip conveyor (hinge belt) in extended form for portal design, suitable for: -long steel chips -chip clusters -fibrous chips -dry and wet machining  Electronic oil mist separator 800 – 1000 m³/h  Automatic central oil lubrication for guideways and ball screws  Grease lubrication for main and counter spindle  HAINBUCH collet chuck size 65 for main spindle, without stop (without collets)  Serial interface  Mounting elements  Documentation

Condition: ready for operation (used), Year of construction: 2020, saw blade speed: 4,000 rpm, Panel saw manufactured in 2020. This FIMAL concept 350 features a squaring length of 3200 mm and a blade diameter range of 300 to 350 mm. It operates at a blade rotation speed of 4000 rpm and has a main motor power of 7.5 hp. If you are looking to get high-quality cutting capabilities, consider the FIMAL concept 350 machine we have for sale. Contact us for further details. • Model: Concept 350 – 3200 • Squaring length: 3200 mm • Blade diameter: 300–350 mm • Blade inner hole: 30 mm • Blade projection (90°): 100 mm (75 mm) • Blade projection (45°): 67 mm (45 mm) • Blade group speed (inverter): 40 m/min Ljdpfx Ansy Dc Dao Isrp • Main motor power: 7.5 hp (5.5 kW) • Extraction outlet: 120 / 100 mm • Extraction air volume: 1800 m³/h • Extraction air speed: 25 m/s • Operating pressure: 7 bar • Air consumption: 85 l/h

Condition: ready for operation (used), Year of construction: 1999, Brand: Homag Type: Optimat CH 03/32/32/E Plus Serie no: 0-341-07-5006 Year: 1999 Techn info: Saw width, with fence: 3 200 mm Saw length: 3 200 mm Lrodpjvwku Ujfx An Iep Cutting height: 50 mm Main saw blade: Ø 300 x 75 mm Scoring saw blade: Ø 125 x 45 mm Main saw speed: 5 100 rpm Scroll saw speed: 5 500 rpm Program carriage feed: 14 m/min Saw carriage feed, forward and return: 6-32 m/min Return feed: 32 m/min Main saw motor power: 5.50 kW Scroll saw motor power: 0.55 kW Operating voltage: 380 V, 50 Hz, 3 phase, 32 amps Control voltage: 24 V DC Floor quality: min. 5 Kp/cm² Connection cable: 5 x 6 mm² 1 fixed, coated front table 1 750 x 400 mm Stock no: 2002415BXM

Condition: excellent (used), Double-side Sizing-Milling & Edge Banding - First (1st) machine in a line Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Panels thickness (min/max) mm 10 / 60 Working width (min/max) mm 230 / 1600 (ca.) Numerical Control / Software WinEdge Adjustable feeding speed (m/min ) 10 - 30 Safety and sound-proof enclosures/cabins SIZING PART (for each side): No. 2 Hogging Units (2 x Kw 5,8 ca.) Ljdpfx Ael Hydmen Ierp No. 2 Milling units (2 x Kw 4 ca.) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt glue + Multing Unit) Pressure zone (adjustable by CN) Edge coils supporting unit (No. 6 reels) Rough Trimming unit (2 x Kw 1 ca.) Fine Trimming unit 08.055 (2 x Kw 0,5 ca.) 0°-30° No. 5 Milling grooving units (5 x Kw 4 ca.) Profile Scraping unit Glue scraping unit Spraying Unit (for polishing liquid) Buffing unit + Hot Air Heater (to reactivate the color of plastic tape)

Condition: used, machine/vehicle number: 008148, Position 1: Single Edgebanders HOMAG + LIGMATECH-KAR 210 AMBITION 2274 Lrsdjxtugcepfx An Isp Position 2: Panel Return Systems HOMAG + LIGMATECH-KAR 210 AMBITION 2274