Through Feed Case Clamp

Gannomat Concept Linie

Condition: ready for operation (used), Number of sanding units 4 St. sanding width 190 mm Sanding height max. 180 mm Control ja weight 3300 kg Dimensions (L/W/H) 2600x920x1890 mm Dust suction hood 2x180, 2x120 mm Löwer DSM 2004 Double-Sided Sanding Machine ----- 4-Belt Sander + Disc Unit (Top/Bottom) Manufacturer's Description: ----- Double-sided, four-belt, single-wood sander for sanding solid wood such as window frames, etc. Highly stable, top-quality design with innovative details. Suitable for high continuous loads, even with high material removal rates. - Sequentially arranged grinding units for roughing, fine grinding, and finishing, each from above and below 1. Belt grinding unit with heavy steel roller 2. Belt grinding unit with rubberized roller and shoe 3. Finishing unit with fiber brush (see optional equipment below) - Direct-drive grinding rollers for slip-free power transmission - Maintenance-free and wear-free CERMET-coated grinding shoes with very good thermal conductivity and absolute dimensional accuracy - External cooling of the grinding zones for cooler grinding and longer belt life - Forced pneumatically controlled grinding belt oscillation - Effective grinding dust extraction directly at the grinding rollers - Airborne dust extraction at the tension rollers - Integrated brushing and finishing unit with large grinding dust extraction - Motorized grinding thickness adjustment via precision threaded spindles and large linear ball bearing sets on hardened and ground precision shafts with dust and Dirt protection Pjdpfxsvu Hgbj Abhspu - Chip removal adjustment at the bottom via precision threaded spindle with dimension display via scale ring (0.1 mm resolution) - Sanding belt tension via pneumatic cylinder with constant tension pressure - Sanding belt change with pneumatic belt release in seconds - Sanding belt tracking adjustment during belt change - Electropneumatic compressed air monitoring - Infeed protection via contact roller for workpieces that are too thick - Workpiece transport via calibrated, non-slip and adhesive conveyor belts over heavy-duty cast iron tables with a finely planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and consistent workpiece transport - Geared feed motor with infinitely variable speed 4-20 m/min - All motors electrically protected - Ergonomically arranged operating elements - Digital thickness display (0.1 mm resolution) with modern magnetic tape system Technical data: ----- - Sanding belt speed 22 m/s - Sanding belt length 1800 mm - Sanding belt width 200 mm - Working width 190 mm - Sanding thickness 2-180 mm - Four brake motors for drive 5.5 kW - Feed motor 1.5 kW - Feed speed 4-20 m/min - Automatic height adjustment 0.37 kW - Two brush units with fiber brushes D 120 x 200 mm at 0.37 kW each - Extraction ports 2 x 180 mm, 2 x 120 mm - Extraction air velocity 20 m/s - Pneumatic connection 6 bar - Working height 870 mm - Length (with soft disc 2740 mm) 2600 mm - Length with control unit (with soft disc 3035 mm) 2985 mm - Width 880 mm - Height 1910 mm - Weight approx. 3300 kg - Operating voltage 400 volts, 50 Hz, 3P - CE compliant Equipped with the following special options: -----...

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, cutting width (max.): 3,100 mm, saw blade diameter: 300 mm, section length (max.): 3,100 mm, Equipment: CE marking, scorer, HOLZ-HER Pressure Beam Saw LINEA 6015 Cutting length 3100 mm x cutting width 3100 mm Saw blade projection 68 mm Grooves up to 25 mm (bi-directional) 7.5 kW main saw motor 2.2 kW scoring saw motor 3 air-cushion tables 1800 mm with feed rollers Cut-out & recess device (for window cut-outs and insertion grooves) Side pressure, program-controlled Eco mode Handheld control device Label printer and software Easy-Plan optimization (upgrade and office version available) and much more... 12-month warranty Pedpfoyngt Sex Abhepu Delivery, installation, and operator training of the machine can be arranged directly through us for an additional charge. The machine is currently located at our distribution warehouse in Gratwein / Austria. In the event of discrepancies between the German version and a foreign-language version, only the German version is legally binding. Our General Terms and Conditions can be found on our website at holzher.de/en/terms-and-conditions.

Condition: new, Year of construction: 2025, Gannomat Concept 70 Eco Laminate – Body press with rapid traverse Technical data: Laminate body press from our showroom; Working area: width from 150 – 2,500 mm, height from 150 – 1,400 mm; depth 700 mm; - Laminate press beam at the top with 6 elements, laminate press beams on the side with 5 elements - Laminate press beams with proven tolerance compensation for tight body joints - Counterpressure surfaces are 40 mm thick, coated, continuous support plates - The pressing force of the press beams is continuously adjusted electronically via 2 potentiometers and set via a frequency converter, therefore, the torque transmission is absolutely wear-free. - Pressing force for horizontal press beams min. 500 daN (kg) to continuously max. 2200 daN (kg) - Pressing force for vertical press beams min. 300 daN (kg) to continuously max. 2200 daN (kg) - Including option: Rapid traverse speed for quick positioning of the press beams, controlled via automatic workpiece detection with sensors in the press beams, pressing speed 5/10/25 mm/sec. Ppedpfx Abeiidm Nshou and rapid traverse speed 50 mm/sec, the sensors can be switched off for pressing special parts. - Tapping mode for precise positioning of the two press beams, e.g. for low pressing forces, drawers and bodies at 45 degrees. Simple operation via 6 separate push buttons, freely adjustable preselection of pressing time with automatic opening, loading height 300 mm The machine is in our showroom and can be delivered immediately. Location: in stock at 54634 Bitburg - immediately available -

Condition: new, Type SK-1000-P6 Working width 1000 mm Min.working length 500 mm Working thickness 2-150mm Polishing roller speed - Frequency control Feeding speed 3-12,5 m/min Total motor power 13.87 kW Disc motor 1.5 kW*1 Cross motor 1.5 kW *1 Screw roller motor 2.2 kW *2 Feeding power 2.2 kW Podpfsdmi Nijx Abhjpu Up and down motor 0.37kW*4 Swing motor 0.37kW *2 Working table up and down 0.55 kW Transport dimensions 3650x1850x2100mm Weight 4200 kg

Condition: used, machine/vehicle number: 008186, Max. panel width: 3200 mm Max. panel length: 3200 mm Podpfsxaudzox Abhspu Main saw blade projection: 110 mm No of Grippers: 11

Condition: used, machine/vehicle number: 007875, Max. panel width: 3800 mm Max. panel length: 2200 mm Main saw blade projection: 130 mm No of Grippers: 7 Ppedowkf Axopfx Abhju

Condition: new, Year of construction: 2026, Sheet metal folder directly from polish manufacturer Prod-Masz. Plate Bending Machine ZGR-2000T/0,8 incl. wheels Technical data: Maximum working length: 2140 mm max. sheet metal thickness: 0,8 mm (steel) Titan-Zinc-Plate 0,8 mm, Aluminium Plate 1,2 mm Cooper plate 1,2 mm Max. bending angle: 145 degrees cutting with rotary shears on the whole working length max. bending edge: 15 mm Protractor, tapping angle Weight: 180 kg Pjdoc Rtv Tspfx Abhspu Rotary shears (max. plate gauge to 0,8 mm / steel) + 350 Euro The machine have certificate CE and 12 months of warranty Shipping costs: its dependent on destination point ONLY SHIPPING IS POSSIBLE Price: 1.350,00 Euro ( VAT excl. ) We provide invoices with 0% of tax.

Condition: new, Type 1300-2S Working width 1300 mm Min.working length 400 mm Working thickness 2-80mm Grinding roller speed - Frequency control Feeding speed 5-20 m/min Total motor power 6.27 kW Transport dimensions 1700x2100x1400mm Weight 1200 kg Podpfx Ajm Dr Rgsbhjpu Price 6100 Eur (EXW Jonava, Lithuania)

Condition: new, Year of construction: 2026, CNC drill and dowel inserting machine for fully automatic bore, glue and dowel driving. The drill glue and dowel machining center with compactness, efficiency, quality and flexibility. Short introduction: • Universal CNC controlled drilling and dowel inserting machine • Glue shot monitoring via GIC • Closed gluing system • Suitable for panel and solid wood processing Psdpsdx Axfefx Abhjpu • Optional additional horizontal and vertical drilling spindles • Relieves CNC machining centers • Optimal complement to nesting machines

Condition: used, Year of construction: 2007, Suitable for the automatic processing of PCD-tipped milling cutters, shank tools, disc-shaped tools such as Saws, milling cutters etc. using the wire-electro-erosion method. Accessories: Total enclosure, Cooling unit for dielectric, automatic fire extinguishing system, Mist extractor N181 Probe, Machine lamp, automatic central lubrication, Workpiece carrier ISO50, Measuring mandrel, Cutter outside diameter: Max. 250 mm Ppsdpfowtmg Djx Abhju Cutting length: max. 260 mm Shank tool diameter: 10 - 250 mm Outside diameter disc-shaped tools: Max. 250 mm Tool weight max.: 20 kg X axis travel: 275 mm Y-axis travel: 300 mm W-axis travel: 200 mm A-axis mounting cone: ISWO 50 E-axis swivel range: 180 ° Required space for the machine: 2535 x 2200 x 2220 mm Weight approx.: 4500 kg Connected load: 4.5 kW (400 V / 50 Hz) colour: gray RAL 7045/7047