Automatic Panelsaw

Giben

Condition: used, Year of construction: 2001, Cutting width: 3300 mm Cutting length: 3350 mm Weight: approx. 4000 kg Saw blade projection: 100-(115) mm Saw carriage: Feed speed: 100-(130) m/min. Return speed: 100-(130) m/min. Main saw blade: 400-(430) mm Motor: 7.5-(11-13.2) kW Scoring unit: 215 mm Motor: 2.2 kW Pusher: Rapid feed: 160 m/min. Return speed: 60 m/min. Extraction: Air speed: 30-35 m/sec. Extraction nozzle: 200 mm / 115 mm Compressed air: Pressure: 5-6 bar Consumption: 20-30 l/min. Storage location: Nattheim Hsdpfx Aovvkqgjbhep

Condition: good (used), Year of construction: 2013, Edge Banding Machine Manufacturer: Brandt Hodpewmby Sjfx Abhjp Type: KDF 440 Year of Manufacture: 2013 Edge Thickness: 0.4 - 3 mm Workpiece Thickness: 8 - 60 mm Feed Rate: 8 - 14 m/min, Vario Joining Unit: Yes Pre-melting Unit: Yes Cross-Cut Saw Unit: Yes Radius Flush Trimming Unit: Yes Corner Rounding Unit: Yes Radius Scraper: Yes Surface Scraper: Yes Buffing Unit: Yes

Condition: excellent (used), Technical data: • Cutting length: 3800 – 4500 mm • Cutting height: up to 115 mm • Main saw blade diameter: 400 mm (optional 430 mm) • Scoring saw blade diameter: 215 / 300 mm • Saw blade arbor: 75 mm (main saw blade), 50 mm (scoring saw blade) • Speed: • Main saw blade: approx. 3695 rpm • Scoring saw blade: approx. 4565 rpm • Motor power: • 7.5 – 13.2 kW (50 Hz) • up to 15.9 kW (60 Hz) • Feed rate: 0 – 130 m/min • Return speed: 130 m/min • Air pressure: 5 – 6 bar • Air consumption: 10 – 30 l/min • Extraction: • Connection: 115 / 200 mm • Flow rate: 1215 – 3675 m³/h Hedpfxey Syauj Abhjp

Condition: used, Technical specifications: Max. planing width: 500 mm Max. planing height: 250 mm Cutterhead diameter: 110 mm Number of knives: 3 2 feed speeds Manual lifting Power supply: 380 V Motor power: 4 kW Overall dimensions: Length: 1000 mm Hjdpozd Evvjfx Abhsp Width: 1100 mm Height: 1400 mm

Condition: used, Year of construction: 2008, Connected load: 15 kW Feed speed: 14 (11) m/min Workpiece thickness: 8 - 60 mm Edge thickness: 0.4 - 8 mm Roller separation: max. 3.0 x 45 / 0.8 x 65 mm Extraction diameter: 120 / 160 / 100 mm Working height: 950 mm Dimensions: 6260 x 1560 x 2300 mm Weight: approx. 3000 kg Storage location: Supplier Hjdpsy Ruzqofx Abhsp

Condition: like new (used), Spindle diameter: 40 mm Lenz roller feed for curved elements Smooth speed adjustment Feed motor power: 0.25 kW Feed rotation: left/right Safety switch Hjdpfx Aev Uz S Ssbhsp Manual spindle height adjustment Table width: 104 cm Table length: 98 cm Machine construction: cast iron

Condition: good (used), Code: 0188 Brand: GIBEN Model: ONIX SP 90 CHALLENGE LINE - CE Standard Automatic horizontal panel saw with clamps for cutting wood panels, multilayer panels, furniture, composite materials, sandwich panels and various materials - CE Standard Hodpfx Absw Ec Riohjp Cutting dimensions mm 4400 x 4300 Blade projection mm 90 Blade carriage: feed speed 5/100 mt/min - return speed 100 mt/min Main blade diameter mm 350 - Motor Hp 12,5 Scoring blade diameter 180 mm - Motor Hp 2 Pusher: feed speed 1/25 mt/min - return speed 60 mt/min Frontal loading of panel stack and pusher with clamps N° 3 front air cushion tables Automatic pusher with side upper guides equipped with 7 pneumatic clamps. The steel clamps keep the stack blocked throughout the panel sizing cycle up to the last trim cut. Automatic lateral aligner Automatic adjustment of the blade projection in relation to the height of the pack to be sawn. Electronic control of the speed and position of the saw carriage Easy access to the saw carriage Pneumatic unit for rapid tool removal G-VISION control: Giben machine control software installed on a PC. Multi-tasking Microsoft Windows XP/2000/NT operating system for easy networking Advantages: Sequential control of cutting patterns, number of panels, and pattern sequence change. Parametric control of the feed speed of the saw carriage according to the stack height and trim width. Direct control of machine functions. Setting of cutting patterns. Suction: diameter suction inlets 200 mm Compressed air 6-7 bar Overall dimensions of assembled machine: mm 6400 x 7500 x 1800 h Overall dimensions for transport: machine mm 6500 x 1500 x 1800 h - pusher mm 5200 x 1200 x 1200 h Total weight kg 3200

Condition: good (used), Code: 0134 Brand: BRANDT - GERMANY Model: KTD 53 Automatic edge bander for wood, pvc, veneer, furniture, custom furniture, joinery and various Technical data: Min/max panel height mm 10/40 Edge thickness min/max 0,4 - 1,5 mm Feed speed 7 mt/min on motorized roller conveyor Min panel width mm 65 Composition: Gluing unit Cutting shear unit End cutting unit Upper/lower trimming unit Wheels on base for easy handling Volt 380/50 Hjdjwq Sc Sepfx Abhop Total power Kw 4,5 Compressed air 6 bar Overall dimensions mm 1800 x 615 x 1170 h Weight kg 280

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, We offer this Giben KG.8250 slab bandsaw, ready for use, manufactured in 2001. Manufacturer: Giben Model: KG.8250 Year of manufacture: 2001 Condition: ready for use Hjdpfx Ajzaiwdobhep Identification category: 1426 Identification type: 844 Machine type: slab bandsaw If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: good (used), Year of construction: 2018, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, input frequency: 50 Hz, saw blade diameter: 380 mm, Equipment: documentation/manual, Number of clamps: 6 Cutting length: 3800 mm Hjdpfx Abey S Rhcjhsp Max. saw blade overhang: 90 mm Air tables: 4x Features include “post-forming” for a single panel or a stack of laminated panels, a linear motor for moving the saw carriage without any friction or mechanical components, a speed exceeding 200 m/min, and an acceleration of almost “1g”, among many others. PRISMA EVO is a cutting center without a motor on the saw carriage (patented), and thanks to this extraordinary innovation, all causes of vibration are definitively eliminated, which improves the quality of the cut surface and ensures a longer blade life. PRISMA EVO uses linear guides with ball bearings for all sliding movements of the saw carriage, the pressure beam, and the side pressure device as standard. The feeder of this model is automatic, electronically controlled, and equipped with a brushless motor. The side aligner is “permanently engaged,” which guarantees a faster cross-cutting cycle for a single strip. The side aligner slides on a linear guide, ensuring smooth and clean movements, and is wear-resistant and virtually maintenance-free.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Maximum panel thickness: 60 mm Pre-milling unit Gluing unit with glue pot Hedpoyziutjfx Abhep Edge trimming unit Corner rounding unit Edge and glue scraping unit Polishing brushes Control: StarTouch with touchscreen

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, Equipment: documentation/manual, Giben panel saw model Prismaic 2 SPT H 100 – Year 2002 Machine in excellent condition, fully operational and ready for use. Hjdpfx Aoy R D Rhjbhjp Equipped with side rear loading. Cutting width: 4300 mm. ✔ Function tests performed ✔ Complete maintenance (pneumatic, mechanical, and electronic) Machine inspected and overhauled by a company specializing in service and maintenance. 📞 Contact us for more information or to schedule a demonstration.

Condition: used, Complete factory for the production of furniture cabinets, composed by: Hedpfx Abjcr U Urohsp SZ0M23) Angular Panel Saw "GIBEN" Tip 17 (mm 5600x2700) with "SIRIO" automatic unloading and stacking system SZ0M25) Panel Saw “GIBEN” Mod. GammaDue (mm 3800x2200) SZ0M26) Panel Saw (Multi-saws) “GABBIANI” (finished panels mm 4250x2120) SZ0M27) Laminating Line “BARBERAN” for melamine papers (glue on paper) SZ0M29) Pressing Line “COLOMBO REMO” (mm 1400 x 9600) for paper / veneer / laminates SZ0M30) Pressing Line “FRIZ” (mm 1400 x 6200) for paper / veneer / laminates SZ0M41) 4-sides Sizing & Edge Banding Line “IMA” Combima fast handling “RBO-BIESSE” SZ0M42) 4-sides Sizing & Edge Banding Line “IMA” Combima softforming with a second double side Sizing & banding machine STEFANI and automatic handling equipment “TOMASSINI” SZ0M39-40) Edge Banding Line (single side) for narrow pieces “HOMAG” Mod. KAL 310 with Splitter "NARDELLO" Mod. Elegance SZ0M35-36) Multi-Borer “BIESSE” Techno Logic with Loader + Unloader “TOMASSINI” SZ0M45) CNC Multi Boring and Dowels Inserting Line “BIESSE” Techno FDT with fast handling “RBO-BIESSE” SZ0M37) CNC Working Center “MORBIDELLI” Mod. Author 600 KL SZ0M56) Reel Cutting and winding machine “CEFLA-DUSPOHL” Tipo RSW 2200 T SZ0M01) Wooden strips end-cutting Line "OGAM+SALVADOR" SZ0M07) Wooden strips end-cutting and stacking Line “SALVADOR+SACOT” SZ0M08) Wooden strips end-cutting and stacking Line “SALVADOR+CMA” SZ0M11-17) Preparing Line for honey-comb panels SZ0M18) No. 6 Mutli-openings (daylights) hot hydraulic presses "COLOMBO REMO" SZ0M21) Sizing and top & bottom Calibrating line for honey-comb panels "GABBIANI + CELASCHI + ELMAG + COSTA Sanding Machines" And many other machines (i.e. multi-borer "VITAP", circular saws, glue spreaders, etc.), saw-dust suction system, rollers ways, shelvings, fork-lift, transpallets, etc. Machines still installed at the end-user's factory. They can be inspected by appointment.

Condition: used, Year of construction: 1997, machine/vehicle number: 3073, functionality: fully functional, input voltage: 400 V, input current: 34 A, input frequency: 50 Hz, type of input current: AC, cutting height (max.): 60 mm, cutting width (max.): 2,850 mm, saw blade diameter: 125 mm, saw blade bore: 30 mm, rotational speed (max.): 2,870 rpm, total length: 5,430 mm, total width: 5,040 mm, total height: 1,640 mm, overall weight: 3,150 kg, cutting length (max.): 3,200 mm, compressed air connection: 6 bar, feed length Y-axis: 3,200 mm, feed rate Y-axis: 40 m/min, main saw diameter: 280 mm, saw drive: 7,500 W, Equipment: scorer, Used plasterboard saw with extraction system for sale For sale is a plasterboard saw with integrated extraction system, year of manufacture 1997. The machine is used but in good condition. Details: - Year of manufacture: 1997 - Condition: Used, but good - Including extraction unit - Location: DE 93326 Abensberg - Inspection under power possible by appointment Important information: - Sale exclusively to commercial buyers. - Sale without any warranty. Hsdpfjyfg Rljx Abhsp - All information provided without guarantee. If you are interested or have questions, please contact us to arrange a viewing appointment.

Condition: good (used), functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 70 mm, cutting width (max.): 1,200 mm, saw blade diameter: 125 mm, rotational speed (max.): 3,800 rpm, total length: 6,000 mm, total height: 1,300 mm, overall weight: 3,500 kg, year of last overhaul: 2024, cutting length (max.): 4,200 mm, collet bore: 75 mm, cutting height with scoring (max.): 2 mm, extraction nozzle diameter: 250 mm, feed length X-axis: 4,500 mm, feed rate X-axis: 7 m/min, main saw diameter: 350 mm, saw blade speed: 3,800 rpm, saw drive: 7,500 W, space requirement length: 6,500 mm, space requirement width: 3,000 mm, Saw for rip cutting but also for sawing. It is very well suited for longitudinal edging of lumber flanks and then cutting to width before planing. With this machine, sawing lumber is incomparably lighter than on classic saws even with a carriage. It can work in automatic and semi-automatic cycle . It has 4 ranges of aggregate position as far as the length of the element is concerned, which means that the aggregate does not have to return all the way to the end of the machine, which shortens the time of cutting the raw material. It significantly facilitates and accelerates the manipulation of Hodpfx Abjuyvnishop with the preparation of lumber for planing, and the even cut makes the alignment saves time on planing the element. Working on it is relatively safe because during the cutting itself, the operator does not have direct contact with the material being cut, and the workpiece is pressed from above with a pressure beam using compressed air. Activation of the pressure beam and the feed of the cutting unit, is carried out using a foot pedal .It is also suitable for cutting boards with a jigsaw .Also equipped with components for various applications. It is ideal for small and medium-sized carpentry shops that process thick massive lumber. The machine is massive and durable.