Long goods shelves

GUSTOS D-5-3000-S

Condition: like new (used), Year of construction: 2024, Used double-sided cantilever racking: hot-dip galvanized bolted system Scope of supply: 4 double-sided racking uprights, height 4,160 mm with base section 1,200 mm 24 cantilever arms with 1,200 mm depth, standard Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height-adjustable in 100 mm increments - Per upright, 6 screwable cantilever arms and 2 base sections with a depth of 1,200 mm, standard = 4 storage levels on top of each other per upright side - Including longitudinal and diagonal bracing for 1,300 mm distance - Racking length 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racking is produced exclusively in Germany. We offer reliable freight services with prior notification before delivery. The material is packed in a way that allows for easy unloading. When installed outdoors, the load capacities are reduced by the wind and snow load. Tjdpfx Aijh Ek Dasrod The subsoil must be made of concrete, level and suitable for dowels, and must be able to absorb the acting loads. The customer must check and ensure the ground conditions, load-bearing capacity, and any required official permits. The racking uprights must be anchored in the ground on site; anchoring to the wall is not necessary and is not recommended. According to the occupational health and safety association, it is recommended that the racking uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.

Condition: excellent (used), Welding positioner, Focker Strähler, 8 tons 8000 kg load capacity with hand and foot remote control Speed and inclination continuously adjustable Todof Ezdnjpfx Aired 0.02 rpm to 1.1 rpm Diameter 1500 mm Height to center when tilted 1170 mm Height in horizontal position 1400 mm Length 2400 mm Width 1500 mm Condition: visually and technically flawless, runs very quietly.

Condition: ready for operation (used), Year of construction: 2015, operating hours: 48,086 h, controller manufacturer: SIEMENS, controller model: 840D, number of axes: 3, This 3-axis DMG MORI CTX Beta 800 4a was manufactured in 2015. It features a Siemens 840 D control, a main spindle and counter spindle, and a bar machine package for efficient operations. Ideal for complex turning and milling tasks, it includes a hinge type conveyor and a coolant system with multiple pressure settings. If you are looking to get high-quality turning capabilities, consider the DMG MORI CTX Beta 800 4a machine we have for sale. Located in Germany, contact us for more information. • IMS 76 main spindle • Counter spindle • 2 x 16-station Sauter star turret VID 30 • Siemens 840D control • Eccentric turning and milling capability • TC alternating speed • Glass scales on X1, X2, X3, Y1, Z1, Z2, Z3 • Counter spindle slide with cross stroke, C3, tailstock Additional equipment Tjdpfx Aox D Ndwjirjd • 980 L coolant system with 8 bar/20 L and 20 bar/40 L high-pressure, M-function programmable • Paper band filter • Chuck rinsing device for main (outside) • Chuck rinsing device for counter (outside) • Coolant spray gun • Hinge-type chip conveyor • Bar machine package (bar feeder) • Window cleaning with compressed air • SK package for aluminum machining • Tool breakage monitoring Artis CTM

Condition: new, Load Weight Shelf 42000 kg Loading weight per level 3000 kg Number of load levels 2 x 7 Stk. Recommended material length 6000 mm Tsdpfx Aijfgyhdjrjd Column width 3000 mm Shelf height 2440 mm dimensions m

Condition: excellent (used), Year of construction: 2005, Machining center CWK 400 Year of manufacture: 2005 X travel: 650 mm Y travel: 650 mm Z travel: 650 mm Rotary table (4th axis) CNC: Siemens Sinumerik 840 D Table length: 400 mm Table width: 400 mm Workpiece weight: 400 kg Tedpfxswpciao Airod Operating hours: 42,000 h Tool changer chain magazine: 80 tools, HSK 63 2-pallet pool Weiss motor spindle: 36 kW, 18,000 rpm Accessories and 60 tools included

Condition: good (used), functionality: fully functional, type of input current: three-phase, overall weight: 800 kg, total width: 600 mm, total length: 820 mm, total height: 1,600 mm, input voltage: 400 V, Used Liebert NX 40kVA / 32kW 3-phase UPS battery backup system (tested and includes good batteries) Rated power: 0.8 PF: 40 kVA Output power 32KW Battery Battery type VRLA 40x YUASA NPL24-12 I 12V 24 AH Width mm 600 Todpfx Aiet H Irljrod Depth mm 825 Height mm 1600 Weight (approx.) without battery kg 341 Input Parameters Rectifier Type IGBT-based Vector Controlled PFC (PF Corrected) Input Voltage to Rectifier Vac 380 / 400 / 415 (400V : Nominal) 3-ph, 3-w Input Voltage to Bypass Vac 380 / 400 / 415 (400V : Nominal) 3-ph, 4-w (Ph+N) Permissible Input Voltage Range for Rectifier Vac 305 to 477 Input Frequency Hz 50 or 60 Permissible Input Frequency Range for Rectifier Hz 40 to 70 Input Current THD at nominal voltage % < 3* without any Filter Input Power Factor at nominal voltage ≥ 0.99* without any Filter Flexi Power Walk-In seconds 5 to 30 (selectable) Output Parameters Inverter Type IGBT-based Vector, Repetitive & PI Controlled Output Power kW 24 32 48 64 Output Voltage Vac 380 / 400 / 415 (400V : Nominal) 3-ph, 4-w (Ph+N) Output Voltage Regulation % +/- 0.5 (3-phase RMS average) Output Frequency Hz 50 or 60 Output Frequency Regulation % +/- 0.05 Output Voltage THD at nominal voltage % 1% (max) Capability to handle High Crest Factor Load 3 : 1 (compliant with IEC 62040-3) Capability to handle Step Load 0-100 or 100-0 Transient Recovery mseconds < 0.5 (recovery to 95% of the voltage level) 10 (recovery to 99% of the voltage level)

Condition: used, Year of construction: 2008, x-travel 800 mm y-travel 800 mm z-travel 800 mm control Sinumerik 840D spindle turning speed - stepless 20 - 18.000 U/min power capacity at 40 % load 28,00 kW power capacity at 100 % load 19,00 kW max. torque on the spindle 121 / 82 Nm spindle taper HSK-A63 B-axis -10 - +180 ° c-axis 360 x 0,001 ° feed X/Y/Z-axis 20 - 10.000 mm/min rapid traverse X/Y/Z 60,00 m/min feed B-axis 1 - 10.800 °/min rapid traverse B-axis 30,00 U/min size of pallet 800 x 630 mm max. workpiece diameter 800 mm workpiece height max. 1.330 mm table load 1,20 t toolpiece magazine: chain magazine 180 Stück tool diameter 80 mm tool diameter with 2 vacant positions 160 mm tool length - max. 450 mm weight of tools max. 15,00 kg total power requirement 57,00 kW weight of the machine ca. 22,00 t dimensions of the machine ca. 8,50 x 5,50 x H3,80 m 5-axis-machining center with SIEMENS Sinumerik 840D powerline control, RS4 pallet-storage, chip conveyor, coolant system with temperature control, coolant through the spindle 40-80 bar infinitely variable via M function, Tsdewiii Hspfx Aired air through the spindle, tool cone cleaning device, exhauster, mechanical tool breakage control, Renishaw workpiece measurement(without probe), electronic handwheel. Machine without pallets!!!

Condition: good (used), Year of construction: 2012, CNC Turning / Millingcenter Machine type: DMG CTX beta 500 V6 Control: Siemens 840 D Shopturn Year: 2012 Working hours: 42.067 h Spindle running time: 20.209 h SPECIFICATIONS Max. turning length: 500 mm Tedpfoz D Ug Ijx Airod Turningdiameter: 410 mm Max. swing over bed: 700 mm Spindle bore: 87 mm Bar capacity: 77 mm C-Axis: 0,01° Main Spindle: ISM 76 Max. revolution: 5.000 rpm Spindle power: 25 / 34 kW Torque: 280 Nm Collet chuck: Hainbuch Spantop Nova 65 Subspindle: ISM 52 Max. revolution: 5.000 rpm 3-jaw chuck: Berg KHL 200 mm Travel Y-Axis: mm Amount of turrets: 1 Tool: VDI 40 Driven Tools: 12 revolution driven tools: 4.000 drive power driven tools : 11,3 kW Equipment Chip conveyor Short Bar Loader: LNS QLS 80 S2 Direct linear scales: X,Y High pressure pumps Toggle filter Tool setter

Condition: ready for operation (used), Year of construction: 2010, operating hours: 36,033 h, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: SIEMENS, controller model: 840D SolutionLine, overall weight: 16,000 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 60, number of axes: 4, This 4-axis DECKEL MAHO DMC 80 H duoBLOCK was manufactured in 2010. It features a maximum spindle speed of 12,000 rpm and an impressive X, Y, and Z-axis travel of 800 mm each. The machine has a robust weight of 16,000 kg, ensuring stability during operation. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 80 H duoBLOCK horizontal machining centre we have for sale. Contact us for further details. • Power capacity: 103 kVA • Current (In max): 148 A • Voltage: 400 V • Frequency: 50 Hz • Control voltage: 24 V • Measuring system: Direct, absolute, photoelectric • Resolution (X, Y, Z): 0.001 mm • Position tolerance (X, Y, Z): 0.007 mm (Standard) / 0.006 mm (with Accuracy Package) • Position tolerance A-axis: 9 ws (Standard) / 8 ws (with Accuracy Package) • Position tolerance B-axis: 8 ws (Standard) / 6 ws (with Accuracy Package) Tedpfey Ryyrex Airsd • Position tolerance C-axis: 7 ws (Standard) / 5 ws (with Accuracy Package) • Table height (top of pallet to floor): 1120 mm • Distance spindle center to table: 150 mm (minimum distance, Motor spindle) / 145 mm (Gear spindle) Technical Specification Taper Size HSK 100

Condition: ready for operation (used), Year of construction: 2013, operating hours: 35,000 h, travel distance X-axis: 300 mm, travel distance Z-axis: 800 mm, spindle motor power: 48,000 W, spindle speed (max.): 4,000 rpm, controller manufacturer: SIEMENS, controller model: 840 D, number of axes: 4, This 4-axis DMG MORI CTX Beta 800 4a was manufactured in 2013. It features a powerful Mailspindle ISM 102 with a speed of 4,000 rpm and an efficient 8/20 bar coolant system with a 600 L capacity. The machine is equipped with a 16-place star turret and a barfeeder for enhanced productivity. If you are looking to get high-quality turning capabilities, consider the DMG MORI CTX Beta 800 4a turn-mill centre we have for sale. Contact us for further details. • Coolant system: 8/20 bar, 600 L, with paper band filter • External coolant for main and sub spindles • Draw tube: 104 mm • Turrets: 2 x 330 mm VDI30, 16-station star turrets Additional equipment • Bar feeder IF • IRCO bar feeder SIMAG 80.1-R, 3200 mm Technical Specification Driven Tools Yes Counter Spindle Yes Todpfxsyuc Apj Aired