Universal folding machine

HERA

Condition: good (used), Year of construction: 1998, Chipper with horizontal feed and conveyor belt in standby mode. Slow-running and therefore very quiet. Max width: 300 mm. Max height: approx. 30 mm. Motor: 18.5 kW, 115 rpm. Ideal for use next to a panel saw for long strips. Redpegmn Amsfx Adbobt

Year of construction: 1970, condition: good (used), machine/vehicle number: 024.0468, Offer 22569 Technical data: - max. working width 2040 mm - max. material thickness 2 mm - bending angle approx. 0 - 135 ° - motorized stroke upper beam - max. stroke upper beam 85 mm - max. adjustment bending beam 80 mm - manual bending process is supported by eccentric weight - connection 400 V - space requirement approx. W 3700 x H 1250 x D 450 mm Rbjdpfx Aop Atvmedbot - weight approx. 1700 kg

Condition: good (used), Year of construction: 1978, working width: 2,000 mm, sheet thickness steel (max.): 4 mm, Equipment: emergency stop, foot remote control, We are selling our Hera folding machine, model UM III. 🔧 Technical details: Rbsdpfxoycl H Ho Adbst • Manufacturer: Hera • Model: UM III • Working length: 2000 mm • Bending capacity: up to 4 mm steel sheet • Features: Back gauge for precise work The machine must be collected with a crane. Lifting equipment is not available on site.

Year of construction: 1998, condition: ready for operation (used), Immediately available from location: Hydraulic guillotine shear Hera Model TK 3000 / 10 Year of manufacture: 1998, only very few operating hours (as new) Motorised backgauge Backgauge controlled – 1000 mm Machine control: Siemens Simatic CP 7 Cutting length: 3050 mm Material thickness up to 10 mm Drive: 15 kW Rbjdeyaybaopfx Adbet Weight: 8 t Price: €9,500 plus VAT, ex-location

Condition: new, Year of construction: 2025, Sheet metal folder ZGR-3140/1.0 We have a new, high-quality folding machine of 3140 mm/ 1.0mm. This machine guarantees very high quality and agility of the work doing by the roofers. Our main task is the production of folding machines, with which we are concerned many years. The bending machine is equipped in degree scale, Romans screws, rear frame and gas struts. Directly from manufacturer! - max. working length 3140 mm - steel plate to 1.0 mm Rbjdpfxoci R Exo Adbot - our machines bend both a copper sheet and aluminum sheet - the total weight of machine is 600 kg - the clearance between the lower beam (fixed) and the upper beam (pressed) of 80 mm - bending angle of 145 degrees - thickness of the bending beam of 20mm - new, full machine - delivery to the client - certificate CE - TAPPING ANGLE IS FREE !! Price excl. shipping We provide invoices with 0% of tax. Delivery every week :)

Condition: used, Year of construction: 1990, pressure 110 t chamfer lenght 4100 mm distance between columns 3100 mm dayligth 425 mm Rbsdpfeuiz I Djx Adbst throat 300 mm stroke 225 mm working feed 10 mm/sec return speed 100 mm/sec table height 900 mm oil volume 260 l total power requirement 11 kW weight of the machine ca. 12000 kg dimensions of the machine ca. 4400 x 1750 x 2500 mm Equipment: - Cybelec DNC 34 PC control system - Controlled backgauge 700 mm (X-axis) - Hydraulic tool clamping at the top - 2 support arms with sliding system - Upper tool - Lower tool - Side + rear safety device - 2 manual foot switches

Condition: used, Year of construction: 1978, sheet width 3100 mm plate thickness 2 mm rear stop 1000 mm Rbedpfxjuagxpo Adbjt cutting angle 1°06 ° no. of strokes 45 Hub/min total power requirement 3,0 kW dimensions of the machine ca. 3600 x 2200 x 1600 mm weight 4500 kg Equipment: - Electric motorized backgauge - With digital ELGO position display - Manual cutting gap adjustment - 1x side stop with mm scale - 2x support arms - 1x freely movable double foot switch - Front finger guard Special accessories included: - Pneumatic sheet metal holding device for thin sheet metal cuts

Year of construction: 2011, condition: like new (used), For sale is 1 roller conveyor incl. one geared motor each: Technical data: Year of construction: 2011 Rbjdsihpn Nspfx Adbot Length: 12,75m Width: 1.40m Height: 1.00m Loading: 4 tons possible Gear motor per roller conveyor: SEW-EURODRIVE R87 DREE90L4 (for further details see picture on the type plate) Three of the four roller conveyors have a wooden wall on one side over the entire length and one roller conveyor has a side wooden wall with a length of 5.20! Two of the four roller conveyors are each equipped with 3 lateral removal systems. (see pictures)

Condition: ready for operation (used), sheet width 2020 mm plate thickness 2.5 mm ST upper clamping bar adjustment 250 mm Lower beam adjustment 80.0 mm bending speed 5.5 sec / Hub bending angle max. 0 - 180 ° Control konv. work height max. 930 mm back stop - adjustable ca. 215 mm engine output 2.6 kW weight 1750 kg range L-W-H 2800 x 1200 x 1450 mm - in checked conditoins - machinevideo - ?v=kFXtKjDlV3k Rodpfxoxabngj Adbebt Features: - Robust electric-driven folding machine - Bending angle adjustment via electric potentiometer - Manual backgauge * Adjustment via handwheel from the rear - Manual lower beam adjustment - 1x freely movable double foot switch - Main switch at the front

Year of construction: 1988, condition: used, sheet width 1500 mm Rsdpfolp U Txox Adbjbt plate thickness 3 mm weight of the machine ca. 4 t dimensions of the machine ca. BxTxH 2000x1500x1800 mm

Condition: used, Chipping roundwood: 100-150 m3/h Redpfohclffex Adbobt Chipping small waste: 50-100 m3/h Weight: 3165 kg Max log diameter: 254 mm Söderhamn Eriksson 670-56 CC chipper with electric motor. Söderhamn Eriksson 670-56 chipper is intended for the production of chips for pulp, fibreboard and chipboard manufacture. Both roundwood and sawmill waste may be used as raw material. Chipper 670-56 feed is horizontal, at an angle of 37,5 grades to the grain. The chips, of consistent high quality, may be discharged at the bottom or blown straight upwards. Be one of those woodworking companies that wisely manage the resources available to them.

Condition: good (used), functionality: fully functional, Year of construction: 2002, machine/vehicle number: 7106, working width: 3,000 mm, sheet thickness (max.): 4 mm, Equipment: type plate available, hydraulic swing beam shear HERA TS 3000x4 with feed unit Year of manufacture: 2002 Rbodpfx Adox Td Aiobst

Condition: used, Year of construction: 1984, sheet thickness: 3total power requirements: 2,2throat depth: 200motor: 2,2sheet length: 1100stroke: 56 Rbjdpfx Ajv H Hfnjdbot Machine is in good conditions.

Condition: like new (used), Technical Specifications Drilling capacity in steel (diameter): 32 mm Throat depth: 320 mm Drilling stroke: 170 mm Spindle mounting MK: 3 Speed range: Table size: 570 x 480 mm Redpfx Aovzgm Isdbebt Total power requirement: 1.6 kW Weight: 650 kg Dimensions: 1200 x 800 x 2200 mm

Condition: used, Technical details: pressure: 6 t distance between columns: - mm stroke: 130 mm table surface area: 1200x550x30 mm throat: 500 mm total power requirement: 1,1 kW weight of the machine approx.: 1000 kg space requirements of the machine approx.: L:1,8xB:0,9xH:0,9 m HORIZONTAL SS - operation through keyboard Rjdpfx Adou Nfm Tsbjbt - operating pressure: 10 to 600bar stepless adjustable - work piece clamping area is adjusted through manual screwing of slide-counter holding plate - sizes of counter holding plate: L: 500xW:300xH:35mm - stroke of slide plate: 130mm - silde clamping plate: 550x300x35mm functional *