Hydraulic guillotine shear

Hera TS 3000x4

Condition: excellent (used), Year of construction: 1993, spindle bore: 118 mm, turning diameter over bed slide: 635 mm, turning diameter over top slide: 390 mm, turning length: 2,000 mm, total length: 4,170 mm, total width: 1,960 mm, total height: 1,800 mm, spindle speed (max.): 1,250 rpm, swing diameter over cross slide: 390 mm, bed width: 480 mm, overall weight: 5,200 kg, Centre lathe Colchester 600 - MAGNUM 1250 MACH-ID 9464 Make: Colchester 600 Type: MAGNUM 1250 Year: 1993 FAGOR 2 Axis Dro Feed all directions Conical turning attachment DBC Turning Length: 2000mm Swing over bed Ø: 635mm Swing over cross slide Ø:390mm Swing in the gap Ø: 900mm Nwedsyuwwhepfx Akfsf Gap length: 300mm Spindle bore: 118mm Spindle power: 22kW Bed width: 480mm Tailstock spindle Ø: 95Ø Stroke pinole: 190mm Spindle taper: 6Mk Speeds / ranges: 1250Rpm Length: 4170mm Width: 1960mm Height: 1800mm Weight: 5200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2008, Technical details: Nedpfx Aeviqybjkfewf bore capacity in steel (diameter): 40 mm throat: 350 mm bore stroke: 120 mm bore capacity in cast iron: 60 mm spindle taper MT: MK 4 spindle throat: 350 mm spindle speed:: 50 - 1450 / 18 step U/min feed: automatisch/manuell mm/U Distance spindle/table max.: 25 - 705 mm table clamping surface:: 430 x 430 mm drill table adjustment: 680 mm column diameter: 150 mm distance spindle center to floor plate:: 1210 mm total power requirement: 1,6 kW weight of the machine ca.: 350 kg dimension machine xH: 0,95 x 0,55 x 2,3 m Height-adjustable table(swivel and tilt adjustable ) Table can be swiveled 45° left/right and rotated 360° around the column Thread cutting up to M24 Coolant system A vise is mounted, and a threading device is included with this machine. *

Condition: used, material width 300 mm coil weight 3 t material thickness 2 - 4 mm Straightener, 7 rolls, Make. Schleicher, Type RM 6-95/160 - band width 300 mm - band thickness 2 – 4 mm - cross cut 1200 mm² - voltage 220/380 V 50 Hz - total power requirement 3,1 kW coiler with press roll, Make Schleicher, Type H-3 - Coil weight 3 t - Band width 400 mm Nwjdpecdrmmsfx Akfjf - voltage 220/380 V 50 Hz - total power requirement 3,92 kW without control

Condition: excellent (used), Year of construction: 1980, Horizontal gear hobbing and threading machine for gears, splined shafts, worm screws, threads, and pinions up to 5 meters in length, complete with 3 milling heads models APFW, APGS, APG, set of gears, various steadies, and indexing device. Nwjdjyba Rwopfx Akfjf

Condition: used, Year of construction: 2007, pressure 100 t stroke 500 mm table surface area 900 x 600 mm rapid traverse 22 mm/s stroke speed 2 mm/s ram surface 700 x 350 mm total power requirement 2,2 kW weight of the machine ca. 1,6 t dimensions of the machine ca. 1,9 x 0,85 x 2,3 m The machine is of the Italian make SICMI, which was traded by the Knuth company. Nwsdpfx Aovprv Rskfjf

Condition: used, Year of construction: 1998, turning diameter over bed 0400 mm turning diameter over slide rest 260 mm turning length 1500 mm centre height 200 mm centre distance 1500 mm spindle bore 50,8 mm speeds 20- 3150 U/min feeds longitudinal slide 0,01 - 3,24 mm/U feeds cross slide 0,005- 1,62 mm/U weight of the machine ca. 2 t Nwsdpfexp Rzbox Akfef dimensions of the machine ca. 3,35 x 1,4 x 1,9 m voltage 400 V connected load 7,7 kVA With chuck, Multifix toolholder and digital readout.

Condition: reconditioned (used), functionality: fully functional, turning diameter over cross slide: 690 mm, spindle bore: 150 mm, turning diameter: 1,040 mm, turning diameter over top slide: 690 mm, center height: 500 mm, center width: 2,000 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 160 mm, travel distance Z-axis: 380 mm, bar passage: 55 mm, Center height: 500 mm Distance between centers: 2.000 mm Maximum turning diameter: Over cross slide: 690 mm Over bed: 1.040 mm Over gap: 1.070 mm Bed width (hardened guides): 670 mm Gap length: 480 mm Gap length in front of the faceplate: 320 mm CARRIAGE Length of bed guideways: 1.020 mm Cross slide travel: 640 mm Compound slide travel: 360 mm SPINDLE Nedeyhhuwepfx Akfowf Spindle nose: ASA 15’’ Spindle bore diameter: 150 mm Front bearing size (NN): 200 / 310 / 82 mm Rear bearing size (NNU): 190 / 260 / 69 mm Internal Morse taper reduction sleeve: No. 6 Number of spindle speeds: 24 Speed range: 4 ÷ 800 rpm THREADING Total number of threads: 398 Metric threads: 0.5 ÷ 224 mm Module threads: mod. 0.25 ÷ 11 Whitworth threads: 56 ÷ 1/8 TPI Diametral pitch threads: 112 ÷ 1/4 DP FEEDS Number of feeds: 108 Longitudinal, cross and compound feeds: 0.05 ÷ 22.4 mm/rev RAPID TRAVERSES Longitudinal, cross and compound: 2.500 mm/min Longitudinal return: 5.000 mm/min TAILSTOCK Quill diameter: 130 mm Quill Morse taper: No. 6 Quill travel: 420 mm STEADY RESTS Bed steady rest capacity: 140 ÷ 500 mm Carriage steady rest capacity: 40 ÷ 350 mm PERMISSIBLE LOAD Cantilever load: approx. 1.500 kg Between centers, without steady rest: approx. 5.000 kg Between centers, with steady rest: approx. 6.000 kg Machine weight: approx. 7.800 kg

Condition: ready for operation (used), Year of construction: 2013, operating hours: 5,446 h, spindle speed (max.): 12,000 rpm, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, spindle motor power: 22,000 W, table load: 300 kg, number of slots in tool magazine: 41, number of axes: 5, This 5s HAAS UMC 750 was manufactured in 2013. It features a spindle speed of 12,000 rpm and a tool capacity of 41 tools, making it suitable for various machining tasks. The machine offers a maximum table load of 300 kg and includes advanced coolant systems for efficient operation. If you are looking to get high-quality machining capabilities, consider the HAAS UMC 750 universal machining center we have for sale. Contact us for further details. • Spindle type: Inline direct drive • Tool holder: SK40 • Tool changer: SMTC • Rotary technology: 2 axes with support bearing • B-axis range: −35° to +110° • C-axis range: 360° • Clamping surface: Ø 630 × 500 mm • Coolant system: standard coolant, P-Cool, through-spindle coolant (TSC) • Renishaw probing: WIPS system with workpiece probe and tool measurement • Control functions: 8M functions, rotate and scale • Memory: 16 MB • HSM: High Speed Milling • Rigid tapping: yes Nsdpeyid Hvjfx Akfjwf • Cycle time hours: 5,446 h • Power-on hours: 21,246 h Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2020, Control Unit Brand HAAS Model NGC Main Drive Number of axis 3 Movement X-Axis Movement 1270 mm Nwjdpfx Aksx Enh Tofef Z-Axis Movement 635 mm Y-Axis Movement 508 mm This 3-axis HAAS VF-4 vertical machining center was manufactured in 2020. It features a 1270 mm X-axis, 508 mm Y-axis, and 635 mm Z-axis travel, supporting a table load up to 1588 kg. Equipped with a 20-station tool magazine, chip auger extractor, and a Renishaw OTS tool probe. Consider the opportunity to buy this HAAS VF-4 vertical machining center. Contact us for more information about this machine. Application Types Milling

Condition: like new (used), Center height over bed: 330 mm, max turning diameter over carriage: 408 mm, max turning diameter over bed: 640 mm, max turning diameter in gap: 899 mm, distance between centers: 2000 mm, variable spindle speed, rpm: 18-1500, spindle bore diameter: 105 mm, spindle nose: ASA 11”, tailstock: MT5, quill diameter: 90 mm, travel: 250 mm. cross slide travel: 275 mm. main motor: 15 hp. machine weight: 3450 kg. Nwedsx Dikkopfx Akfef