Flanging machine

HOMAG EDGETEQ S-380

Condition: used, machine/vehicle number: 007350, X axis working area: 4000 mm Lhsdpfjwcyd Ijx Abcjd Y axis working area: 1400 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 4 axes Total number of drilling spindles: 30 Total number of tool changer positions: 28

Condition: as good as new (ex-display), Year of construction: 2025, Pressing area: 3000 mm x 1500 mm Operating vacuum: -0.85 bar Vacuum pump flow rate: 40 m³/h Pump power: 1.5 kW Noise level: 70 Db Heating temperature: max. 200 °C Heating power: 16 kW Machine length: 3100 mm Lodpou Egp Iofx Abcshd Machine width: 1650 mm Machine height: 1750 mm Weight: 950 kg

Year of construction: 1977, condition: refurbished (used), I sell the double mitre saw Rapid DGS, year 1977. Ledpfxod N Rb Dj Abcjhd Tilting heads Drilling front heads on each side included Very good condition. Available immediately.

Condition: used, machine/vehicle number: 007517, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, Hot Air Premilling Unit: yes Corner Rounding Unit: yes Lodpfx Abewuz E Recehd Grooving Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 9 nr

Condition: used, machine/vehicle number: 006835, Type of edging: Thin edge, Thick edge Trimming Unit: yes Ljdpfsrl Utbox Abcshd Max Panel Length: 55 mm

Condition: used, machine/vehicle number: 007716, X axis working area: 3250 mm Y axis working area: 1220 mm Lhjdowuz N Nepfx Abced Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 4 axes Total number of drilling spindles: 18 Total number of tool changer positions: 16

Condition: new, Year of construction: 2025, Gannomat Concept 70 Eco Lamella - carcass press with rapid traverse Technical data: Lamella carcass press from our showroom; Working range: width from 150 - 2.500mm , height from 150 - 1.400mm; depth 700mm; - lamella press beam top with 6 elements, lamella press beam side with 5 elements - lamella press beam with practice-proven tolerance compensation for tightly pressed carcass joints - Counterpressure surfaces are 40 mm thick, coated continuous support plates - The pressing force of the pressing bars is infinitely variable electronically controlled by 2 potentiometers and adjusted via frequency converter, therefore the torque transmission is absolutely wear-free. - Pressing force for horizontal press bars min. 500 daN (kg) to infinitely variable max. 2200 daN (kg) - Pressing force for vertical press bars min. 300 daN (kg) to stepless max. 2200 daN (kg) - Including option: Lodpfxjiidm Nj Abcohd Rapid traverse speed for fast positioning of the press bars, controlled by automatic workpiece recognition with sensors in the press bars, press speed 5/10/25 mm/sec. and rapid traverse speed 50 mm/sec, the sensors can be switched off for pressing special parts. - Jog mode for precise positioning of the two pressing beams e.g. for low pressing forces, drawers and carcasses 45 degrees. Simple operation via 6 separate pushbuttons, freely adjustable pressing time preselection with automatic opening, loading height 300 mm. Machine is in our showroom and can be delivered immediately. Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Size: 6 Nominal heat output: 170kW -- BImSchV stage 2 and CE conform-- combustion chamber completely fireclayed For rooms of: 4.800 m³ (according to DIN) Fuel: logs, chipboard, chips, chip briquettes fuel consumption: 40 - 50 kg/h Blower air capacity, free blowing: 14.000 m³/hour Outlet opening: Ø 700mm Flue pipe connection Ø 220 mm Weight: 2.150 kg Lhodpfxodlhdbj Abcsd SPS control cabinet: 380 Volt

Condition: like new (used), Year of construction: 2021, Used CNC machining center Manufacturer: Homag Model: Drillteq V-200 (Optimat BHX 055) Year of manufacture: 2021 X-axis working range: 200 – 3050 mm Y-axis working range: 70 – 850 mm Z-axis working range: 12 – 60 mm, special workpiece thickness: 8 mm Vertical drilling spindles: 13 pcs. Horizontal drilling spindles in X: 4 pcs. Horizontal drilling spindles in Y: 2 pcs. Grooving saw in X direction Ljdpsymzkvsfx Abcjhd Milling spindle: 10 kW; 1,250 – 24,000 rpm 4-position tool changer (ATC) Workpiece clamping system with collet Max. workpiece length: 3050 mm Workpiece width: 70 – 850 mm Workpiece thickness: 8 – 56 mm; max. weight: 35 kg POWERCONTROL PC86 power touch control unit with Full HD multi-touch 24″ display, operating system Windows 10 Network connection, Tapio-ready prepared WoodWop 7.0 including MDE and production list software BASIC barcode reading system Delivery exclusively includes all tools and HSK holders shown!

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, feed length X-axis: 4,200 mm, feed length Y-axis: 1,600 mm, Homag Centateq E-310 / Profi BMG 310/42/16/F/V/K Prepared for one main spindle with gluing unit, mounted to the right of the gantry crossbeam. 5-axis main spindle, 12 kW Drilling head with 31 spindles: 21 vertical and 10 horizontal Grooving saw blade, tiltable 90° Blowing nozzle for 60 mm edge Lhsdpfxox Irzcs Abcsd Circular tool magazine for 32 tools, HSKF63 Linear tool magazine with 8 positions Circular magazine with 10 positions Power Edge Pro Duo gluing unit Safety control with bumper Chip conveyor Vacuum pump PowerTouch, WoodWop control software