Edgebander

HOMAG HPP 300/43/43

Year of construction: 2002, condition: good (used), Make: HAEUSLER Type: Crocodile Year: 2002 Specifications Metric US Standard Min. shell inner diameter 1500 Max. shell inner diameter 6000 Min. shell outside diameter 1500 Max. shell outside diameter 2500 Minimum wall thickness 20 mm Maximium wall thickness 70 mm Max. section weight 30 T Max. weight total workpiece 120 T Cjdokwcnzjpfx Abpjgn Dimensions (Estimate) Length 60000 mm Width 6000 mm Height 3200 mm Weight 0 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: like new (used), Year of construction: 2014, X-axis feed rate: 9 m/min Total length: 3,200 mm Workpiece height (max.): 45 mm Edge thickness (max.): 3 mm Height adjustment type: mechanical Input voltage: 400 V Chip removal: 2 mm Technical specifications Cgjdpewat Alsfx Abpen Year of manufacture: 2014 Edge thickness: 0.4-3.0 mm Motor voltage: 3 x 400 V Motor frequency: 50 Hz Min. workpiece length: 210 mm Min. workpiece width: 70 mm Workpiece height: 8-45 mm Chain feed: 9 m/min Cross-cut saw unit: Yes Radius scraper unit: Yes Surface scraper: Yes CE-certified version Joining unit with a chip removal rate of up to 2 mm Automatic feeding of roll materials Individual feeding of strip materials Gun-type shear for rigid PVC/ABS up to 3 mm thick Glue application using Glue roller Cross-cut saw unit, 12,000 rpm, 0.27 kW 2 carbide saw blades, 100 mm diameter, 24 teeth Multifunctional milling unit with 2 HF motors with 0.35 kW for radius, flush, and chamfer milling for thin edges Extraction connection: 2 x 80 mm, 1 x 120 mm Max. connected load: 7.5 kW at 3 x 400 V / 50 Hz

Condition: used, Year of construction: 1996, Used Machine Year of manufacture: 1996 Equipment and technical data: Cutting length: 2800 mm Cutting width: 1300 mm Format cuts: 2800 x 2800 mm Vertical cutting height: 0–75 mm Cutting height at 45°: 0–53 mm Cross-cutting by scale at angle stop: 2800 mm Motor: 4 kW Speed: 4200 rpm Saw spindle: 30 mm Saw blade diameter: 300 mm Table extension: 540 mm Anodized version Tiltable up to 45° Digital display of tilt angle Prepared for scoring unit Mitre fence Dimensions: 2800 x 1600 x 1500 mm Cedpfx Aexrhh Rebpsgn Weight: approx. 880 kg Availability: short-term Location: Röllbach

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: Werksüberarbeitungsnummer: WÜAF25T411592, cutting length (max.): 3,200 mm, cutting width (max.): 1,410 mm, saw blade diameter: 3,150 mm, power: 5.5 kW (7.48 HP), Equipment: scorer, F25 basic configuration - Manual height and tilt adjustment of the saw blade from 0 to 46°, with digital display - Drive power 4 kW (5.5 HP) with one speed, 4,200 rpm - Double roller carriage, carriage length 3,200 mm - Angle mitre fence, cross cuts up to 3,450 mm - Saw blade diameter max. 315 mm, saw blade projection max. 104 mm - Cutting height 100 mm, 70 mm at 45° - Machine height 880 mm Cgsdpjwwuamjfx Abpjn Equipment package Type 4 - 5.5 kW (7.5 HP), 2 speeds - Parallel fence Digit – X, 1,410 mm - Large extraction hood (PSV) - Scoring unit Basic with LED lighting

Condition: used, Holz Her Auriga 1308 XL POWER Compact design – Edge thickness 0.4 – 8 mm Motorized bridge adjustment SPS screen control Edge-Control, PPC 319W, 18.5" touchscreen monitor iTronic adaptive pressure and glue quantity control, including cleaning routine fa.s.t. setting technology “Set-up in the gap” Long infeed fence with motorized adjustment Pre-milling unit for material preparation before gluing Fully automatic edge magazine for rolls and strips Glue application station GLU JET for cartridges + PU gluing, with sensing nozzle Workpiece height 8-60 mm High gloss package Pneumatic pressure unit Pneumatic end trimming unit for rolls and strips up to 8 mm edge thickness, with pneumatic tilting from 0-10° for the trim saws FR301 MOT6 multifunctional milling unit: flush milling up to 8 mm, radius and bevel milling at 15° via NC axis FF301 MOT1 contour milling unit: rounding corners up to 3mm edge thickness or optional 45° bevel, working height 12-60 mm, postforming possible ZK301 MOT4 scraper unit for bevels and radii with 2 scraper holders, NC axis-controlled FK701 surface scraper unit with pre- and post-sensing – for finishing Buffing unit – polishing Cgjdpfoyg Itqox Abpen Spraying device at infeed and outfeed Complete DIA (diamond) tooling included First delivered in 2022 Machine in TOP CONDITION from small business closure Available ex-stock Lieboch

Condition: reconditioned (used), Year of construction: 2010, Voltage 400V 3~ 50Hz 7.22kW Control panel with LCD display and keypad Jointing unit with 2 counter-rotating diamond cutters Corner rounding unit for edge faces Manual unit adjustment Edge thickness 0.4-5.0 mm (optionally 8 mm) Workpiece height 8-60mm Feed speed 11 m/min 3 free slots for finishing units Cgjdjyf I T Ujpfx Abpjn Edge feed for coil and strip material Scraper knife