Milling machine

hurco bmc30

Condition: used, CNC Vertical Machining Center HURCO Type BMC 30/M Serial No: B3M92202056AB : 9650234 Year of construction 1996 CNC path control Ultimax 3 Travel X: 760 mm, Y: 460 mm, Z: 610 mm Table size (clamping surface) 1010 x 400 mm Table size (with water groove) 1120 x 500 mm Spindle holder SK 40 Distance spindle nose - table 150 - 760 mm Projection 450 mm Spindle speed 80 to 8000 rpm infinitely variable Feed rate 3 to 16,000 mm/min. Rapid traverse 24 m/min. Spindle drive 7.5 kW at 30 min / 5.5 kW at 100% Mains connection 400 Volt, 50 Hz - CNC path control Ultimax 3 (with hardware update e.g. TFT monitors) - Electronic handwheel - Indirect measuring system with rotary encoders on the ball screw spindle - Tool changer with 24 tool positions - Fully protected cabin with sliding door - Rotating control panel - spindle drives Yaskawa (Japan) - pneum. mechanical tool clamp - Coolant unit adjacent, pushed under from behind - trough rinsing Machine width 2400 mm Prodpfstrhq Hox Ab Ied Space required for transportation L x W x H 3400 x 2400 x 2550 mm Weight approx. 4800 kg good condition

Condition: good (used), Year of construction: 2004, spindle passage 60 mm turning length 280 mm control 840 D Siemens turning speed range - drive spindle 6300 U/min drive capacity - spindle motor 3,3 kW turret 1 Scheibenrevolver no. of tools in turret 1 8 worktool system DIN 69 880 / 25mm x-travel 90 mm z-travel 280 mm feed power 5500 N rapid traverse 24 m/min power capacity - milling spindle 5000 kW turret Schwalbenschwanz no. of tools in turret 2 6 x-travel 81 mm z-travel 80 mm feed power 5500 N rapid traverse X-axis 16 m/min rapid traverse Z-axis 24 m/min weight of the machine ca. 2,5 t dimensions of the machine ca. 6,0 x 2,0 x 2,0 m TThe INDEX ABC machine is a compact lathe for short turned parts made from bar stock. It has an inclined bed design with two independent turrets. The top turret is primarily intended for internal machining and machining, while the lower turret is used for external machining. The turret arrangement enables collision-safe working and simple programming programming with high tool availability. The large free space in the working area enables a favourable chip fall The work area consists of two turrets: Prjdpfjwbvhasx Ab Iod ‘Turret 1’ - Disc turret with 7 radially arranged tool holders Ø 25 mm DIN 69880 and a holder for the reinforced synchronised spindle on the turret station 8. tools with 1’ holders can also be used with an equalising holder can also be used. The turret is prepared for the V-ledge system. - Synchronised spindle for rear end machining, simultaneous parallel machining with main spindle. Ø42 collet chuck or 3-jaw gripper chuck for internal and external clamping and external clamping. Jaw stroke 0.6 mm. Clamping diameter (external) 75 mm. - Back-boring device. Starting from the centre of the working spindle in clockwise direction, 3 stationary back-boring tools are back boring tools are arranged. These are located in the pitch circle of the synchronised spindle. The back machining is carried out simultaneously with the machining on the the working spindle. Two additional tools can also be used, can be equipped with a tool feed drive. ‘Revolver 2’ - Turret with 6 symmetrical dovetail holders and each station with 2 locating holes for cylindrical shank per station. The following tool systems can be used. - stationary tools that can be moved in the Z direction - Driven tools with cylindrical shank Ø25 (can be used in two positions per station) can be used) - including bar loader LM 3200 - + various accessories (various Ø guide half-shells/tool holders) Technical data: - Material bar diameter: (Ø 25 / Ø 36 / Ø 52)- --> round Ø 8 - 25.4 / 8 - 36 / 8 - 52 mm --> square SW Ø 6 - 14 / 6 - 20 / 6 - 20 mm --> hexagon SW Ø 7 - 22 / 7 - 30 / 7 - 41 mm --> octagonal SW Ø 7 - 22 / 7 - 32 / 7 - 40 mm --> bar length max. 3200 mm --> from bars Ø 25 mm, min. 2,500 mm --> up to rods Ø 25 mm, min. 1,500 mm --> bar support = approx. 300 = 6 bars Ø 52 mm Mass (bar loader) = 700 kg

Condition: ready for operation (used), Year of construction: 1997, Main Drive Spindle speed range 80 to 8000 Spindle motor power 5.5 kW Number of axis 3 Movement X-Axis Movement 760 mm Y-Axis Movement 460 mm Z-Axis Movement 610 mm Additional Equipment Lehman 4/5-axis dividing machine, diameter 200 mm Fully protective cabin with sliding door Podpfxjxn U Aaj Ab Isrd This 5-axis Hurco BMC 30HT/M was manufactured in 1997, featuring a Lehman 4/5-axis dividing head with a 200 mm diameter. It includes a CNC Ultimax 3 control, a tool changer with 24 positions, and a spindle speed up to 8000 rpm. The machine offers X/Y/Z travel paths of 760/460/610 mm and a rapid traverse of 24 m/min. Consider the opportunity to buy this Hurco BMC 30HT/M vertical machining center. Contact us for more information about this machine. Application Types Milling

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: B3M92212078CC, CNC Vertical Machining Center HURCO Type BMC 30/M Year of manufacture: 1998 CNC path control Ultimax 3 X: 760 mm, Y: 460 mm, Z: 610 mm Table: 1010 x 400 mm Spindle mount: SK 40 Distance spindle nose - table: 150 - 760 mm Overhang: 450 mm Spindle speed: 80 to 8000 rpm, stepless Rapid traverse: 24 m/min Spindle drive: 7.5 kW at 30min / 5.5 kW at 100% Electrical connection: 400 Volt, 50 Hz - CNC path control Ultimax 3 (with hardware update, e.g. TFT monitors) - Electronic handwheel - Indirect measuring system with rotary encoders on the ball screw - Tool changer with 24 tool positions - Full enclosure / sliding door - Swivel operating panel - Pneumatic/mechanical tool clamping Dimensions (L x W x H): 3400 x 2400 x 2550 mm Weight: approx. 4,800 kg Good condition Pjdpfx Abjw Tdiue Iord

Condition: good (used), Robot Manfacturer: Staeubli Type: RX170 Predpjbrhtdjfx Ab Ied

Year of construction: 1997, condition: ready for operation (used), Max. load: 500kg, feed rate: 3-7600mm/min, rotational speed: 80-8000/min, length: 4000mm, width: 3776mm, height: 2692mm, weight: 4.15t. Prjdpfxoi Atg Uo Ab Iod

Condition: ready for operation (used), functionality: limited functionality, To be sold as a package: HURCO BMC 30 Machine number: BK-9-002-020 Year of manufacture: 1990 HURCO BMC 45M Machine number: 92001097BB Year of manufacture: 1997 Prjdpfx Aet Takaeb Isd The machines can be inspected but cannot be operated. Delivery terms: ex works Location: 36110 Schlitz-Bernshausen Delivery time: immediately Price: negotiable

Condition: used, Year of construction: 2017, X = 600 mm Y = 400 mm Pjdpfxjwzu Hbo Ab Iord Z = 310 mm incl. cooler

Condition: good (used), Year of construction: 2014, Hurco VMX 84 T, Prodpfx Abov S Twuo Iod Year of manufacture 2014, WinMax control, X/Y/Z travel 2135/860/760 mm, 40-station tool changer, SK 40 tool holder, Spindle speed up to 18,000 rpm, High-pressure internal coolant system, Simulation graphics, Electronic handwheel, Pocket milling with islands, DXF software, 3D infrared probe

Condition: used, Year of construction: 1990, x-travel 0500 mm y-travel 400 mm z-travel 400 mm table-size 680 x 380 mm CNC control 432 PHILIPS feed range 1-3000 mm/min rapid traverse 6 m/min Tool bore ISO 40 turning speed range 20 - 3150 U/min main drive DC 5 kW milling head -swivable +/- 90 ° total power requirement 12 kW weight of the machine ca. 1,2 to dimensions of the machine ca. 2,5 x 2 x 2 m CNC milling machine with 432 Control. Prjdpfsu Rt Nxox Ab Iod