IMA BIMA 300

IMA BIMA 300

Condition: used, Year of construction: 2005, CNC Machining Center Manufacturer: IMA Type: BIMA 300 Year of manufacture: 2005 Technical data Work area - Machining area X-axis: 4,300 mm - Machining area Y-axis with main spindle and 20 mm tool: 1,400 mm - Machining area Y-axis with drilling unit (all vertical drilling spindles): 1,100 mm - Max. clamping height above the vacuum suction surface: 125 mm - Max. workpiece thickness: depends on equipment and application - Working height: approx. 950 mm - Two-zone work area without pendulum machining: 2 x 2,050 mm - Average clearance without pendulum machining: 200 mm - Two-zone work area with pendulum machining: 2 x 1,750 mm - Average clearance with pendulum machining: 800 mm Main spindle - Spindle power: 7.5 kW - Tool holder: HSK-F63 - Taper diameter: 38 mm - Automatic tool clamping - Clamping force: 11,000 N - Release force: 20,400 N - Max. tool weight: 6 kg - Spindle speed: continuously variable, 1,500 - 18,000 rpm Laedpfx Alj Adyhwoyjh - Direction of rotation: programmable, clockwise and counterclockwise - Drive: Three-phase motor with frequency converter - Spindle lubrication: permanently lubricated at the factory - Spindle cooling: air-cooled - Integrated CNC rotary axis for tool positioning over 360°, with torque support and pneumatic connection Axis speeds - Max. rapid traverse X-/Y-axes: 60 m/min - Max. rapid traverse Z-axis: 30 m/min Vacuum, extraction, and compressed air - Required compressed air pressure: 7 bar - Extraction port diameter: 250 mm - Required extraction air velocity: 28 m/s - Required extraction volume flow: 4,950 m³/h - Vacuum pump capacity: 90 m³/h Dimensions and weight - Machine length: approx. 5,750 mm - Machine width: approx. 3,830 mm - Machine weight: approx. 6,000 kg Accessories - 90-degree angle drilling unit - 3 x HSK tool holders Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: good (used), Year of construction: 2002, functionality: fully functional, 3-axis machine Working area: X-axis: 3,000 mm Y-axis: 1,200 mm Height above the top edge of the suction plate: 100 mm Laodpfx Aoz D A Rbslysh 6 work piece supports, each with 2 tubeless vacuum suction cups, each with 1 rear and 1 front work piece stop 1 work piece stop in the Y direction (left and right) 4 lifting rails for placing heavy work pieces, automatically lowerable 1 vacuum pump, 100 cbm/h Machining units: Main spindle, 5 kW Speed: 1,500 - 24,000 RPM water-cooled Rotation direction: left & right Automatic tool magazine with 8 positions moves directly along with the milling spindle for milling tools only Vertical drilling unit with 14 spindles Spindle spacing: 32 mm All spindles can be controlled individually Speed: 6,000 - 9,000 RPM Horizontal drilling/sawing unit 4 spindles Feed stroke: 80 mm Drilling diameter: max. 12 mm Grooving saw diameter: max. 125 mm Unit can be swiveled 0 / 90 degrees Control / Software IMAWOP 5.0

Condition: used, Year of construction: 2008, - Machining area 4300 x 1250 mm - 8 pcs. workpiece supports - Main spindle 7.5 Kw / 11kw - Vertical drilling unit - Horizontal drilling unit - Dado cutter - Tool changer for 18 positions CNC machining center Manufacturer: IMA Type: Bima 300 Year of manufacture: 2008 Technical data - Machining area 4300 x 1250 mm - 8 pcs. workpiece supports Laedpfszux Tiex Alysh - 1x Main spindle 7.5 Kw / 11kw (S1 / S6) HSK F63 1500 - 18000 rpm - Horizontal drilling unit - Vertical drilling unit - Dado cutter - 2x Vacuum pump, each 90 m³/h - Safety mats - IMA Wop software + office license

Condition: used, Year of construction: 2012, - Machining area: 5300x1400 mm - Main spindle replaced 3 years ago - 18-position tool changer Technical data Ljdpfx Aszuw Rtelyeah Machining area - In the X direction: 5300 mm - In the Y direction with main spindle + WZ-0: 20 mm: 1400 mm - In the Y direction with drilling unit: (all vertical drills) 890 mm - Single-position machining: X = 2 x 2550 mm - Free space in the center: X = 200 mm - Alternating field machining: X = 2 x 2250 mm - Free space in the center: 800 mm 1 automatic tool/adapter changer magazine - Arrangement: mounted on the support, moving in the X direction - Disc changer with 18 magazine positions Guidance system - All axes are equipped with pre-tensioned, surface-hardened precision roller guides. Central lubrication - Manual central lubrication for all main axis linear guides and Z ball screw. 1 vacuum pump, 90 m3/h Console table consisting of: - 2 work piece stops fixed on the right and 2 on the left in the X direction, for movement in the Y direction - 10 adjustable support arms in the X direction, each with a rear stop - All stops are controlled by the program - The suction plates are fixed via the patented 2-circuit clamping system, eliminating the need for hoses. - 8 smooth support rails, automatically retractable - 2 push buttons for the workpiece clamping/releasing function Additional 2nd vacuum pump, 90 m3/h 1 additional central stop row, for centering workpieces Chip conveyor 1 main spindle - Drive power: 10.0 kW in S-6 operation - 7.5 kW in S-1 operation - Tool holder: HSK F63, taper diameter = 38 mm, similar to DIN 69893 - Speed range: infinitely variable RPM, programmable 1 centrally integrated CNC axis, rotating 360 degrees - for all adapter units, with torque support on the main spindle and pneumatic interface 1 vertical drilling unit l14 with 6 spindles, horizontal and attachment unit for a dado cutter - Horizontal drilling units with 2 outputs each Attachment unit for a dado cutter - Swivel range: 0 or 90° Control system ICOS CNC Modern, powerful PC-based control system with: - User-friendly interface with Windows standards - Trajectory control of all servo axes - Job list / order processing - IMA backup and recovery system on two hard drives - Uninterruptible power supply (UPS) IMAWOP software package - for dialog-oriented creation of CNC machining programs - - 3D view and basic simulation of the programmed workpiece, the suction cups and consoles including tool and adapter display.