Veneer press

Joos BEU 70 Medium

Condition: new, Year of construction: 2025, The Concept Easy is the ideal assembly support for dowel construction at the case goods production as well as at drawer production. Ihsdpsdx Daasfx Abcsw Short introduction: • Small footprint requirement, less than 1,8 m2 • Potentiometer for stepless adjustable pressing force • Pressing force min. 300 daN (kg) • Pressing force max. 2200 daN (kg) • 3 Pressing velocities and adjustment rates 5 /10 / 25 mm/sec. (with fine positioning / creep feed) • Adjustable clamping cycle time with automatic opening

Condition: good (used), Year of construction: 1989, Pressing area 2550 x 1350 mm Number of press cylinders #6 Total pressing force 140 t Opening width approx. 400 mm Operating voltage: 3 x 400 V + N, 50 Hz. Total connected load approx. 26 kW Space requirement (L x W x H) approx.: 3400 x 1600 x 2000 mm Weight: approx. 5500 kg Hydraulic hot plate press Down-piston design Electric hot platens Pressing pressure continuously adjustable via pressure switch Hydraulic pump Ihsdswd N Rmepfx Abcsw Central control panel with all operating and Digital temperature display for both hot platens Press cycle counter Safety ripcord Rack compensation Main switch Note for used machines: • Errors in technical specifications and subject to prior sale. • Subject to change without notice. • Prices quoted are for pickup from the location - free shipping! • The machines have been cleaned and functionally tested. • All machines are sold as seen, without any warranty. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only respond to inquiries if you provide your address and telephone number!)

Condition: excellent (used), Robland 3200 silver line format saw with a trolley scoring saw with a separate engine, trolley length 320cm main engine 7KW 3 speeds max disc 450mm 0-45 tilt electrically adjustable with readout up-down saw electrically adjustable without readout Ihsdpfxov S Hy Aj Abcow culaga on the right side motorically adjustable up to 1240mm digital readers on the culaga on the trolley angle device included Branded machine in very good condition,

Year of construction: 2012, condition: good (used), machine/vehicle number: ENOG, DEMAG KBK crane headliner crane runway dimensions approx. 8x4m Iodpfxomqf Nfe Abcjhw Payload / lifting load 250 KG - 0.25to Technical data of the system: Crane runway made from Demag KBK1+2 rails The system is delivered complete: KBK rails, rail connectors, trolleys, end plates, cable carriers, holders/hangers, etc. incl. Demag DC-COM 250KG chain hoist Crane is dismantled and available immediately Used condition, see pictures Item location is 75053 Gondelsheim Dispatch by forwarding agent or pick-up only by appointment Demag KBK1 KBK2 and KBK3 rails are stock items! Other KBK systems are also available. Payload 125KG - 1600KG Please inquire about your crane runway with cantilever load and dimensions.

Condition: new, Year of construction: 2024, Tunnel type parts washer for metal and plastic parts. Used in different sectors like automotive, food, metal machining, sheet metal, plastic crates etc. Operation Principles The work piece enters in tunnel by means of belt conveyor system; the positioned nozzles wash every piece of the work piece. The work piece, while passing through the tunnel is washed by pressurized and heated water + chemical mixture. All oil, chip and other industrial contaminations are removed from the surface of work piece during this washing process. Tunnel washing machines are standardized as well as specially tailored according to application by INTERSONİK engineering department. Washing Process Flow Washing, passivation and drying are designed exclusively by the Intersonik Process Engineers in accordance with the desired results supported by Intersonik environmental friendly chemicals. Operation Process ► Pre wash ► Main wash ► Rinsing ► Passivation ► Drying Application Areas ► Automotive industry ► Military defense industry ► Food industry ► In all manufacturing industry for mass production and Ihodod I Azvspfx Abcow maintanance purpose ► Metal furniture industry Conveyor is specially designed and manufactured by INTERSONIK according to your needs and work piece. Conveyor speed is adjustible. Automatic liquid fill is standart. Electrical heating is standart heat exchanger and burner heating types are optional. All data is visible and controllable via digital screens PLC control is optional. All liquid tanks are isolated for heat retention. Mist collecting vacuum pump and unit is standart. Please feel free to contact with us for other options and details. tunnel washing, automatic washing, automotive parts washing, metal washing, parts washer, degreasing, spray washing, pressurised washing machine

Condition: used, Year of construction: 2021, functionality: fully functional, The BP 800 is an automatic bundle packer. Products up to 760 mm wide and 380 mm high can be packed. - Semi-automatic bundle packer - Pneumatic piston - Swiveling PLC display - Adjustable air flow in tunnel - Transport rods made of heat-resistant fiberglass - LD-PE film 25 – 80 µm - Low energy consumption - Complies with EU standards Technical specifications Power supply: 380 V Output per minute: 10 bundles Ihjdpfxowth Dqo Abcew Usable sealing bar: 760 mm Maximum product height: 380 mm Maximum film roll width: 750 mm flat film Compressed air: 6 bar Working height: 945 - 1105 mm Machine dimensions: 2665 x 1410 x 2105 mm Weight: 605 kg Download data sheet

Condition: good (used), Hook type shotblasting machine 250 kg TOSCA TS-250 Type: Hook type Max. diameter of workpiece: 1000 mm Max. height of workpiece: 1500 mm Max. workpiece weight: 500 kg Machine oppening width: mm Nr. Of turbines: 2 Turbine type: 360 Turbine wheel diameter: 360 mm Power of turbine: 7,5 kW Max. turbine flow: 105 kg/min Type of transport rail: Y Cleaner type: airwash Foundation: no Ihedevpgq Nepfx Abcsw Housing protection: Mn+ rubber Req. air flow: 3.000 m3/h Max. installed power: app. 19 kW Total weight of machine: 0 kg Total width of machine: mm Total height of machine: mm Total length of machine: mm Machine is in the process of full refurbishment. All components that are damaged will be replaced with new, turbiness fully reconditioned, new color RAL 7037/2000..... Machine will be dellivered in condition comparable AS NEW. !!! AS NEW CONDITION !!!

Condition: used, Year of construction: 2013, 3D-Venjakob Perfect Air Jet painting line: - Manufacturer: Venjakob - Year of construction: 2013 - Working width: 1.300mm - Max. part length 6.500mm - In U-shape with angle transfer Consisting of: 1. loading belt, length 3,050mm 2. free space für Sanding machine (only optional, not included in the price) 3. spraying machine VEN SPRAY PERFECT, length 5.510mm 4. flash-off dryer OIR, length 6,000mm 5. nozzle dryer VEN DRY AIR JET, length 4,160mm 6. angle transfer 180 degrees, with nozzle dryer 7. nozzle dryer VEN DRY AIR JET, length 5,160mm 4pcs. IR tubes 8. nozzle dryer VEN DRY AIR JET, length 5,160mm 4pcs. IR tubes 9. nozzle dryer VEN DRY AIR JET, length 5.160mm 4 pcs, IR tubes Iodpfx Absu Afu Rjcehw 10. 3D UV dryer, VEN DRY UV, GA + HG 11. removal area, belt of the UV dryer Further information: On request

Condition: new, Year of construction: 2026, Kündig Perfect-2 1350 RED-L Wide Belt Sander incl. Intermediate Lacquer Sanding Configuration Special price for exhibition machine - showroom model - - Robust, space-saving wide belt sander for the highest standards - Constant working height due to upper part adjustment - Working width: 1350 mm - Overhead sanding, with 2 sanding units - Serrated rubber contact roller in proven hardness - Infinitely variable height adjustment of the contact roller according to grit scale - Electric lifting/lowering of the contact roller depending on unit selection - Electronically controlled segmented sanding pad - Entire sanding pad unit tiltable by 10° - Parallel spring-loaded, ground steel pressure roller at the infeed - Rubberized pressure roller between the sanding units and at the outfeed - 2 motors: 18.5 kW and 11 kW, 400 Volt, 50 Hz - Motorized precision height adjustment with digital readout - Belt tension, control, and oscillation pneumatically operated Compressed air consumption approx. 2 l/min - Optimum safety thanks to automatic instant stop with disc brake in case of belt breakage, etc. - Workpiece feed 2.2 kW with conveyor belt and drive roller - Vacuum system for the entire working table with additional perforation of 200 mm for smaller workpieces Iedpfxjk Dpp Ss Abcohw - Automatic thickness setting across the entire working width - Workpiece over-thickness protection with instant feed stop and lift-off automation - Stepless adjustment of material removal - Electronic feed control on operator panel, infinitely variable 3 - 15 m/min - PLC control with teach-in memory - Pneumatic conveyor belt control - Workpiece support with rollers at infeed and outfeed - Enormatic: fully automated quick setup and feed activation - Eco energy saving mode - Error diagnostics - Pass-through height 210 mm up to 18.5 kW - Sanding belt size 1350 x 2000 mm Perfect - Features: High-quality swiveling Plexiglas control panel - 10'' touch screen - Industrial control system - Automatic pressure regulation and storage of sanding pad elements - Electronic compensation for sanding belt grit size - Job and operating hours counter Lacquer Equipment: - Infinitely variable sanding belt speed on 2nd unit - Cleaning nozzles for the sanding belt of the 2nd unit, controlled by use - Electronic sanding pad with 22 mm segment width - Additional sanding pad insert Additional options included with this machine: Fold-down outfeed table extension (without panel) C10) LED package ASB5+AS3) ECS workpiece air blow-off with fan Location: 54634 Bitburg - Immediately available -

Condition: excellent (used), total width: 1,300 mm, total length: 3,500 mm, overall weight: 7,000 kg, operating pressure: 300 bar, transport width: 1,600 mm, transport height: 2,350 mm, transport length: 4,350 mm, Simimpiantin Shelf Press for Veneering 3500×1300 Shelf length: 3500 mm Shelf width: 1300 mm Two loads Press with 8 cylinders Shelves heated with water from central heating Max. working pressure: 300 bar Piston diameter: 80 mm Ihjdpfx Aexxpgbobcew Machine weight: 7000 kg Machine dimensions: 435×160×235 cm (H)