3 rolls asymmetrical bending

KK-Industries CY 90-10/3.0 with motor

Condition: new, weight max. 5,0 t workpiece diameter 100 - 2500 mm total power requirement 2 x 0,37 kW load capacity drive unit max. 2500 kg load capacity rotating unit max. 2500 kg table turning speeds 100 - 1000 mm/min diameter of running wheel 250 x 140 mm Bedogvwgcspfx Abtowt weight of the machine ca. 0,9 t Incl. double foot pedal (start-stop / left-right) Incl. remote control (on the cable)

Condition: new, table diameter 490 mm table load 300/150 kg swivelling range 0-90 manuell Grad table load horiz. 300 Kg table load vert. 150 Kg boring diameter 65 mm table turning speeds 0,4 - 4,0 U/min voltage 230 V total power requirement 0,2 kW weight of the machine ca. 0,1 t dimensions of the machine ca. 0,5 x 0,52 x 0,5 m The D-BYT N welding manipulator has a hollow shaft, also known as Spindle bore in the rotary table, which makes inert gas welding possible. the Due to the compact design, turn-tilt tables can be installed in any integrate existing production facilities. Inert gas welding (forming gas). thereby simplified. Features: - Double foot pedal (start-stop/left-right) included Bwsdpfx Abogvkktstjt - Infinitely adjustable rotation speed of the table - Suitable for any welding process, even high frequency - Very high stability - compact model - Through hole in the turntable plate - CE marking - Very good value for money

Condition: new, Fastech 3-Roll Round Bending Machine FRM 1050 x 90 Technical Specifications: Special equipment included in the price: hardened rolls motorized rear roll adjustment digital display Sheet metal width 1050 mm Sheet metal thickness 3.3 mm max. Sheet metal thickness for pre-bending 3.0 mm Roll length 1050 mm Roll diameter 90 mm Smallest bending diameter 130 mm Weight 475 kg Dimensions L-W-H 1750 x 800 x 1130 mm Motor: 1.1 KW Equipment: Top and bottom rolls, electrically driven Top roll can be pivoted out Taper bending device asymmetrical roll arrangement self-braking main motor separate control and operating panel Safety cable Values apply to St-37 / 240 N/mm² Bwsdpfx Ashzq Dbsbtot CE marking

Condition: new, Year of construction: 2025, number of rollers: 3, roller (bottom) diameter: 90 mm, roller (top) diameter: 90 mm, side roll diameter: 90 mm, sheet thickness steel (max.): 3 mm, number of digital displays: 1, Equipment: cone bending device, emergency stop, foot remote control, hardened rollers, swiveling upper roller, - Capacity: 1070 x 3 mm - Roller diameter: 90 mm - Electrically adjustable follower roller - Digital display - Hardened rollers - Option for conical rolling - Rotatable top roller - Brake motor Bwodpfxei E Tzqe Abtot - Foot control - Emergency stop - Documentation - 400V

Condition: used, Year of construction: 1986, cutting diameter 460 mm saw band length 5334 mm cutting width 1,3 mm cutting range - square - 320 x 320 mm cutting range - flat - 500 x 320 mm control minipos 807 cutting speed 16 - 80 m/min dimensions of saw-band 5334 x 41 x 1,3 mm feed length 580 mm feed length: multiple 5800 mm total power requirement 8 kW weight of the machine ca. 3,5 t dimensions of machine L x W x H 2,7 x 2,95 x 2,15 m Bedpfotqqrfsx Abtswt Accessories: roller track 4150 mm length, roller track 2150 mm length, bundle clamping device, chip conveyor, coolant

Condition: new, Year of construction: 2024, load capacity: 300 kg, Welding rotary table KT 300 Horizontal load capacity: 300 kg, tilted: 150 kg Power supply: 220 V, 50 Hz Table diameter: 450 mm Height: 500 mm Tilting range: continuously adjustable via crank gear motor, 0 - 90° Bjdpfxsc Ug Tlo Abtjwt Speed: 0.3 to 2.5 RPM Includes foot pedal remote control Optional extra: Quick-release chuck Diameter: 300 mm, €450

Condition: good (used), 1 x Universal milling machine Macmon M 100 in very nice condition from vocational school. Technical data and more photos will follow. Bsdpfx Aot Sdaijbtswt The machine can be inspected under power.

Condition: as good as new (ex-display), Year of construction: 2026, sheet width 1050 mm plate thickness 3.3 mm pre-bending 3.0 mm roll length 1050 mm roll diameter 90.0 mm min. dia. 130 mm engine output 1.10 kW weight 570 kg range L-W-H 1.800 x 800 x 1.130 mm Exhibition machine from 2026 With only approximately 2 operating hours Condition like new Special price upon request Furnishing: - Robust electro-mechanical bending machine - 2x central rollers driven by an electric motor (top and bottom roller) - Top roller can be swiveled out manually, with folding bearing - including conical bending device - freely movable control panel - Lower roller manually adjustable, by hand wheel - asymmetrical roller arrangement - self-braking main motor - Safety device (safety line with switch unit) - CE mark/Declaration of Conformity Special equipment included in the price: - hardened rollers - Motorized side roller adjustment - Digital position display for motor-driven adjustable side roller Bwjdpfx Aew U U Udjbtjt

Condition: reconditioned (used), Grinding table dimensions: 2500 x 800 mm Grinding belt dimensions: 6800 x 150 mm Motor power approx. 3.0 kW Mechanical table height adjustment Right-left rotation 2 grinding belt speeds Grinding belt cover on top CE Bwedpfx Abov D H Sistjt Incl. special grinding shoe Note on used machines: • Errors in technical information and prior sale reserved. • Prices quoted are pick-up prices from location - free loading! • The machines have been cleaned and function-tested. • All machines are purchased as seen without any claim to warranty. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only answer inquiries if you provide your address + telephone number!)

Condition: new, Year of construction: 2026, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, grinding belt width: 150 mm, grinding belt length: 7,000 mm, height adjustment type: electric, total height: 2,200 mm, total length: 3,550 mm, total width: 2,000 mm, overall weight: 870 kg, grinding length: 1,500 mm, workpiece weight (max.): 80 kg, extraction connection diameter: 180 mm, grinding width: 950 mm, rotational speed (max.): 1,435 rpm, space requirement height: 2,200 mm, space requirement length: 3,550 mm, space requirement width: 2,000 mm, table height adjustment: 500 mm, Equipment: documentation/manual, Long-belt sanding machine MS92-150 3-cornered sanding belt 150x7100 for manual sanding, matting and polishing. For processing steel, stainless steel and brass. The scope of delivery includes - Machine stand with connecting elements - Infinitely variable belt drive - Pneumatic belt tensioning and manual belt tracking regulation - Sanding unit with contact roller - Electric table lift - Flat machine table - Workpiece stop ruler on the machine table - Original equipment sanding belt - Operating instructions + manufacturer's declaration - CE version The stable machine frame in welded steel construction results in very smooth machine operation. The two machine stands are equipped with an offset so that longer parts than the machine table can be sanded. The sanding belt guide via 3 belt deflection rollers results in the largest possible open working area for the operator and therefore good working conditions, especially with hand sanding blocks. The belt is driven by a three-phase motor with a balanced belt drive roller. The belt has adjustable pneumatic belt tension. The dust collection device is dimensioned so that the sanding dust is collected and directed to the extraction nozzle when connected to an appropriate extraction system. The sanding unit is mounted on backlash-free roller guides to ensure effortless operation. The machine table can be easily and quickly adjusted to the correct workpiece height using the electromotive table lift. The table lift guide elements are maintenance-free. For loading, the table can be extended so far that workpieces do not have to be pushed under the sanding belt when loading. The electrical controls for the main functions are arranged in the middle of the machine for ease of use. Machine color: RAL 9001 cream white and RAL 5003 sapphire blue Switch cabinets and small housing in " light gray " Bsdpfx Aetwb U Aebtewt The machine is supplied as standard with an original equipment belt (W x L) 150 x 7100 mm and a contact roller approx. 50° Shore for 150 mm belt width. Additional accessories: 3-axis table with integrated handling device for turning and swiveling the workpieces. The handling device is mounted in the center of the table under the insertion frame. To work with the handling device, the insertion frame is removed from the machine table. The handling device is equipped with four vacuum suction cups to hold the workpieces and consists of: The bearing with the rotary axis, on which a brake disk is mounted at the rear. The swivel device is attached to the front of the rotary axis. This can be locked at 0°, 22.5°, 45°, 67.5° and 90°. An additional locking disk is attached to the swivel head, which is used for fine adjustment of the workpieces to the sanding belt. The rotary and swivel axes are unlocked pneumatically using a foot switch, while the rotary axes are moved manually. Workpiece weight when used as a flat table with the insert frame in place = 80 daN Workpiece weight when using the handling device in relation to the clamping plate = 25 daN or 120 Nm in relation to the center of the rotary axis.