3 rolls hydraulic bending

KK-Industries CY3R-HHS 360-25/25

Condition: new, functionality: fully functional, Year of construction: 2026, roller (bottom) diameter: 310 mm, roller (top) diameter: 320 mm, roller diameter: 310 mm, roller length: 1,550 mm, working width: 1,500 mm, sheet thickness steel (max.): 38 mm, overall weight: 12,500 kg, total length: 4,500 mm, total width: 2,300 mm, total height: 1,740 mm, power: 18.39 kW (25.00 HP), working length: 1,500 mm, Equipment: documentation/manual, emergency stop, FACCIN HAV 15342 variable three-roll bending machine Electronically controlled, hydraulic three-roll bending machine Technical data: Number of rollers: Three Geometry of the side rollers: variable Working width: 1550 mm Top roller diameter: 320 mm Iedjt Akt Repfx Acajtk Side roller diameter: 310 mm Pressure force against the top roller: 160 tons Working pressure at nominal force: 250 bar Guaranteed installed power: 18 kW (25 hp) Guaranteed maximum rotation speed: 3.5-7 m/min Guaranteed machine weight: 12,500 kg Length: 4,500 mm Width: 2,300 mm Height: 1,700 mm Guaranteed performance: for material with yield strength 260 N/mm² Rolling capacity (full working width) 38 mm Bending capacity (full working width) 20 mm from pipe diameter 1,600 mm Rolling capacity (full working width) 30 mm Bending capacity (full working width) 17 mm from pipe diameter 415 mm Standard equipment: Variable geometry with linear guides for roller movement Extra long folding bearing for increased frame stability Electronic parallelism system EPS Hardened rollers for high wear protection All rollers ground after heat treatment Siemens S7-HMI PLC control system PGS-CLASSIC control system with Siemens touch panel Hitech hydraulic and electrical package Simultaneous rotation and roller movement Safety ripcord with emergency stop and CE certification Central lubrication Water cooling for the hydraulics Cone bending device Prepared for retrofitting of supports and roller conveyors FACCIN Advantage Package AP

Year of construction: 2009, condition: good (used), machine/vehicle number: 120P1109, OFFER 21407 Isdpfx Acohcnhmeajtk Motorized tank/boiler turning device with rail-mounted chassis Technical data: - Total load capacity, driven + follower unit: 40,000 kg - Load capacity per tank/boiler turning device: 20,000 kg - Workpiece diameter: approx. 500 - 3,500 mm - Axle distance of the support rollers adjustable via trapezoidal screw spindle - Roller diameter: 500 mm - Roller width: 150 mm - Driven unit with drive on both sides - Continuously adjustable rotational speed - Handheld remote control for forward and reverse rotation - Drive: 400 V - Both units are mounted on rail-mounted chassis - Space requirement, driven unit: approx. W 3,800 x H 1,150 x D 1,350 mm - Space requirement, follower unit: approx. W 3,600 x H 1,150 x D 1,350 mm - Weight, driven unit: approx. 2,500 kg - Weight, follower unit: approx. 1,800 kg

Condition: refurbished (used), functionality: fully functional, Year of construction: 2007, DAVI_MCB 3060 WT 4-roll plate bending machine CNC _ 3000x65 MM - Year of make 2007 Capacity plate width 3100 mm Plate thickness 65 mm Prebend 55 mm TOP ROLL 600 MM LOWER ROLL 550 MM Configuration installed: • Surface hardening of the four rolls • Dual pre-pinch, with adjustable force upon the input of plate thickness • Conical bending hydraulic attachment - hardened contrast pad. Isdpfx Acsy D Npioajtk • Power driven rolls rotation top/bottom gearbox axial direct drive hydraulic each roll. • Calibration system for re-rolling of welded shells rounding. • Console electric independent with centralized commands joysticks and CNC screen readout. • CNC controller DAVI GENIUS semiautomatic and fully automatic programmable. with digital readout of the 4rollers for use in manual operation, • Opening front side hydraulic drop-end to unload closed shells. • Variable working speed step-less axis interpolation. • Safety installation with emergency stop. • Instruction manuals for operation and service Voltage electric 3phase Vac 380/50 power Kw 75 nr.1 top support hydraulic operated , shell ID max 5 mtrs - CNC programmable nr.1 side support hydraulic on the left nr.1 side support hydraulic on the right, finger pusher to swing the sheet plate forming cones rolling.

Condition: used, Year of construction: 1998, Used DAVI 4-Roller Plate Bending Machine MCB 2020 Technical specifications: Year of manufacture: 10/1998 Manufacturer: DAVI Sheet working width: 2000 mm Sheet bending thickness: 10 mm Pre-bending thickness: 8 mm Roll length: 2050 mm Connections: 400V / 50Hz / 10 HP Power: 4 kW Surface-hardened 4 rollers Isdpjy I Uh Sefx Acaotk Variable bending and rolling speed Safety device with emergency stop switch Digital display of the 4-roller positions on the screen

Condition: good (used), functionality: fully functional, Year of construction: 1999, control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, controller model: 4 axis digital readout, number of rollers: 4, roller (bottom) diameter: 350 mm, roller (top) diameter: 370 mm, roller diameter: 370 mm, roller length: 2,550 mm, working width: 2,500 mm, working height: 1,900 mm, sheet thickness (max.): 40 mm, overall weight: 15,000 kg, total length: 5,300 mm, total width: 2,100 mm, total height: 2,400 mm, power: 25 kW (33.99 HP), input voltage: 380 V, number of digital displays: 4, Equipment: centralized greasing system, cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, 4 roll plate bending machine Faccin model hydraulic 4HEL2,5 30/25 year of make 1999 Linear guideways rolls motion plate width 2500 mm plate thickness 30 mm rolling capacity 2500 x 30 mm prebend 2500 x 25 mm top roll size 370 m lower roll size 350 mm Itodpfx Ajzd Sw Tjcaek surface on the rolls 2550 mm voltage 380/50 power installed 25KW configuration installed Hardened surface of the 4 rolls conical plate bending hydraulic open drop-end digital position readout of the rolls. NC programmable 4 axis Control panel electric

Condition: good (used), Year of construction: 2000, machine/vehicle number: 21977-1964, Offer 26165 Technical Data - Two driven rollers, each hydraulically adjustable - For edging and conical rolling - Operation via a separate control panel, with digital actual value display - and manual operation - Max. working width 1300 mm - Max. sheet thickness at 400 N/mm² without edging - at bending diameter 370 mm, inside 30 mm - with edging at bending diameter 370 mm, inside 25 mm - without edging at bending diameter 380 mm, inside and - width of 370 mm 45 mm - Upper roller diameter each 300 mm - Side roller diameter each 310 mm - Working speed 4.5 m/min - Drive 400 V / 30 kW Ijdpozf Hkdsfx Acaetk - Space requirement W 5800 x H 1900 x D 2200 mm - Weight 8500 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2002, machine/vehicle number: 027536, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, Equipment: centralized greasing system, cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, swiveling upper roller, Machine Description For sale is a Rondo PAS 700 4-roll plate rolling machine, manufactured in 2002 and configured for a working width of 3 metres. The machine has been professionally upgraded throughout its service life. A 10-metre-high tower was installed in 2014, and the machine was further upgraded with a new CNC control system in 2021. The Rondo PAS 700 is currently in daily production, meaning the machine is fully operational and can be inspected and demonstrated under working conditions prior to purchase. This provides a potential buyer with an excellent opportunity to inspect the machine while it is in active production and verify its condition and performance. Key Specifications Model: Rondo PAS 700 Year: 2002 Working width: 3,000 mm Roll configuration: 4-roll Tower height: 10 metres Tower upgrade: 2014 CNC upgrade: 2021 Current status: In daily production Inspection: Possible while the machine is in operation Iedpfx Aezuk Ilocajtk Availability: Ready for delivery in November 2026 Availability The machine will remain in production until delivery and is scheduled to be available for delivery in November 2026. Interested parties are welcome to arrange an inspection and see the Rondo PAS 700 running in production. Please contact us for further technical specifications, photographs, inspection arrangements and pricing.

Condition: new, bending length: 3100sheet thickness: 40upper roll diameter: 460 Itsdpfx Acod Ab Sqoajk Technical specifications: - Hardened and polished rolls - Conic bending device - Digital readout for side rolls - Complete body made of ST-52 Steel - Portable control panel separated form machine - Rolls are mounted with bearings - Top roll cover, openable and closeable by hydraulic, controlled from control panel. - All rolls are driven by hydraulic motor and planetary gearbox - Side rolls upwards downwards movements are hydraulic powered Options: - variable speed of rotation EURO 5.858,-- - metarial feeding table EURO  - oil coiler STD. - center support EURO 18.750,-- - side supports EURO 15.000,-- We have many references!