Drilling and Milling M/C

KNUTH BTM 30

Condition: used, Round-tub vibratory finishing machine WALTHER TROWAL Type CLS-230 Order No. 05.833/00 Year of construction 1969 Tub diameter 1100 mm Total tub height approx. 650 mm Working container / Gross volume max. 230 liters Usable volume approx. 115 liters Speed 1100 to 1800 rpm, stepless Motor power 7.5 kW Power connection 400 Volt, 50 Hz - Operating cycle manual and via timer - Stepless motor speed adjustment via variator gearbox Lhedpfx Adefqpxiowjb - Manually adjustable eccentric imbalance weights - Container with polyurethane lining – lining partially damaged or worn - Sound-insulated lid - Manual separation flap - Built-in screening device after the separation flap - Liquid connection - Material discharge opening 180 x 150 mm - Control cabinet for wall mounting - Baffle lid with perforated screen Space requirement with base L x W x H 1800 x 1750 x 1700 mm Net weight approx. 1800 kg In good condition Function description: Workpieces and abrasive media are set in motion by the generated vibration and are recirculated extremely gently. The constant relative movement between workpieces and abrasive media results in deburring and surface finishing of the workpieces.

Condition: good (used), cutting range round steel at 45°: 250 mm, cutting range round steel at 90°: 280 mm, cutting height (max.): 330 mm, Saw capacity: 280 mm round 330 mm square Saw capacity 45º: 250 mm round 250 mm square Ljdpfx Aett Nd Rsdwjhb Saw speed: 40/80 mtr.min. Sawbelt: 3.320 x 27 x 0,9 mm Saw angle: 0 - 60º Featured with: - Coolingunit Country of origin: Italy Motor power: 1,8 kW Machine weight: 700 kg Machine LxWxH: 190 x 120 x 135 cm

Condition: excellent (used), Geba HS 240 'long slice' slicer with very low running hours - less than 2,500. Available immediately. Lhsdpfx Adek H H Dyowob

Condition: used, Year of construction: 2007, cutting width (max.): 1,060 mm, cutting height (max.): 1,060 mm, Bandsaw Kasto HBA 10×12 Year 2007 Cutting ranges: Cutting area round 1,060 mm Cutting area square 1,060 x 1,060 mm Cutting area flat 1,060 x 1,260 mm Clamping range 300 - 1,260 mm Smallest dimension to be sawn approx. Ø 300 mm Smallest cut-off length 10 mm Minimum offcut length single cut 20 mm Minimum offcut length in automatic mode 100 mm Maximum table load 50 tons Table travel 6100 mm Total drive power 20 kW Saw motor 11 kW Infinitely variable cutting speed at 50 and 60 Hz 12 - 90 m/min Automatic feed length single 2,100 mm Lhjdpewk D Efofx Adwsb Clamping force of machine vice 50,000 N Saw blade dimensions 11,430 x 80 x 1.6 mm Cutting feed: infinitely variable Material feed: hydraulic Material clamping: hydraulic Saw blade guide: carbide, replaceable Saw blade tensioning: hydraulic Saw blade cleaning: with easily replaceable brush, motor-driven The offer is aimed exclusively at traders within the meaning of §14 BGB (German Civil Code) No sale to private individuals

Condition: used, Hydraulic workshop press, broaching press, keyway broaching press MaVo Type 5t-20 hydraulic workshop press Used for broaching keyways in through holes. Press force 5 tons (at 100 bar hydraulic pressure) Column width 770 mm Cylinder stroke 220 mm Distance from threaded piston rod to table crosshead max. 900 mm Pressing speed (downward ram): approx. 11.5 mm/sec. = 220 mm in 19 seconds Pressing speed (upward ram): approx. 24.5 mm/sec. = 220 mm in 9 seconds. Motor power 5.5 kW Power supply 400 volts, 50 Hz - 2-hand control (2 buttons for down, 1 button for up) - HAWE hydraulic pump, type K5/3 (also delivers 400 bar, but the pump is very, very loud) - Threaded connection on the piston rod: M42 x 1.5 mm external thread - 1 screw-in extension, approx. 290 mm, for the piston rod with M42 x 1.5 mm internal thread Ledpfswki Apsx Adwjhb - 1 screw-in extension, approx. 250 mm, for the piston rod with M42 x 1.5 mm internal thread - 2 ram extensions for insertion into the screw-in extension, 110 and 130 mm long - 2 support plates - Very sturdy steel construction made of 140 mm double I-beam - Durability of the steel construction probably 40 tons. or more - Mobile with pallet truck Space requirement: L x W x H 1200 x 930 x 2280 mm Weight: 485 kg

Condition: good (used), Year of construction: 1979, Model making milling machine, universal model milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine, model making milling machine -Manufacturer: Zimmermann, universal milling machine type FZ 1 with extensive accessories -rotating cross table: 490 x 400 mm Lodpenzpx Rjfx Adwehb -Travel: X/Y/Z 320/385/430 mm -Spindle holder: SK30 -Drive: 1.1 kW -Speed: 560 to 14000 rpm, 8-stage -Accessories: incl. see photos -Dimensions: 1000/680/H1970 mm -Weight: 477 kg

Condition: excellent (used), honing diameter 1,5 - 165 mm stroke 80 - 160 mm spindle turning speed range 200 - 2500 U/min stroke speed - under load 80 - 310 Hub/min total power requirement 0,9 kW Ljdpfxewva Rno Adwohb weight of the machine ca. 0,6 t dimensions of the machine ca. 1,2 x 1,0 x 1,6 m

Condition: good (used), Year of construction: 2002, From company liquidation: Peddinghaus Peddimax 1002 Year of manufacture 2002 Lhedpfx Adot Iklkowob Max. Punching and shearing capacity: 1000 kN Punches 31 mm holes in 25 mm steel Shears on the flat steel shear to 500 mm up to a material thickness of 18 mm steel Contact length stop Many accessories (special punches) Special punching device SV 90 up to 90 mm holes Weight: approx. 3,000 kg

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 3595, Ladies and Gentlemen, We are selling a Weiler Commodor B lathe built in 2001 with Heidenhain 3-axis digital readout. The machine has been extensively overhauled in our workshop. Among other things, the main spindle bearing and the lead/traction spindle bearing were completely renewed! Technically, geometrically and visually, the machine is in excellent condition, which you are welcome to see for yourself on site. Availability: on request Machine no. 3595 Year of construction: 2001 Center height: 180mm Center width: 1000mm spindle passage: Ø 56mm max. spindle speed: 2000 rpm Tailstock taper mount: MK4 Feed range: 0.026 - 0.888 mm/rev Possible thread types: Metric, inch, module, diametral pitch Metric thread pitches: 0.35 - 12 mm Spindle brake: switchable Connected load: 4kW Dimensions: approx. 2.2x1.5x1m (LxHxW) Weight: approx. 1.8t Further equipment and accessories: 3-axis digital display, coolant device, chuck guard, pull-out chip tray, 3-jaw chuck Röhm, 4-jaw chuck Röhm, various clamping jaws... Our service promise to you: - We are a certified master company in the field of mechanical engineering - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - On request, we can completely or partially overhaul your chosen machine - On request, we can repaint the selected machine in the color of your choice Lhjdpfx Asthd Shjdwjb E00f3g2rl - On request, you can also order additional accessories such as tools etc. directly - On request, we can install additional accessories such as safety devices etc. - We are happy to take care of shipping and/or installation

Condition: new, Bernardo Universal Turning Machine Master 360 Pro Peak 1000 mm Peak height 180 mm Orbital diameter via bed 360 mm Orbital diameter via creation * 502 mm Orbital diameter via paddling sled 220 mm Bed width 185 mm Spindle hole 52 mm Spindle intake A4 55029, D1-5 Speed range (8) 70-2000 U/min Area Longitudinal Pros (32) 0.052-1,392 mm/U Area of planning precurs (32) 0.014-0.380 mm/U Metric threads (26) 0.4-7.0 mm Customs thread (34) 4-56 Gg/1 " Pinol diameter 42 mm Pinoline path 100 mm Pinol intake MK 3 Engine drop-off power S1 100% 1.5 kW (400 V) Engine recording power S6 40% 2.2 kW (400 V) Machine Measurement (B x T x H) 1825 x 750 x 1600 mm Weight about 576 kg * Bed length removable: 205 mm Delivery Ledpfed I H Izjx Adwohb • 3-axis digital display i200 with LCD display • 3-baking lining DK11-200 mm/D5 • Planboard 200 mm/D5, according to A4 55029 • Fixed bezel-passage diam. max 70 mm • Running bezel-passage diam. max 60 mm • Coolant equipment • First filling with Shell Tellus 46 • Extractable late newfir • Tension 280 mm • Quadruple steel holders • Protection device for quadruple steel holders • Slip clutch • Micrometer longest strike • Thread watch • LED machine light • Reducer sleeve • Changes • 2 centering tips • Foot pedal with braking function according to CE • Engine with magnetic brake according to CE standard • Unterdesigned with drawers • Operating tool