Milling machine

Kunzmann WF4/3

Condition: excellent (used), Year of construction: 2006, travel distance X-axis: 400 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 1 rpm, quill stroke: 60 mm, total height: 2,100 mm, total width: 2,100 mm, total length: 2,300 mm, table width: 450 mm, table length: 750 mm, rotational speed (max.): 4,500 rpm, rotational speed (min.): 1 rpm, overall weight: 1,900 kg, workpiece weight (max.): 500 kg, Travel X/Y/Z 400/350/300 mm, spindle spped 1 - 4500 rpm, motor 4,5 KW, spindle ISO 40, control Heidenhain TNC 320, table size 750x450 mm, hydraulic tool clamping, coolant device, spash guard, tool holders, manual Iiodpfewb Erzsx Aabeh

Condition: repair required (used), Year of construction: 1996, functionality: not functional, machine/vehicle number: 340547, travel distance X-axis: 400 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 400 mm, quill stroke: 60 mm, overall weight: 1,300 kg, table length: 650 mm, workpiece weight (max.): 250 kg, table width: 350 mm, power: 10 kW (13.60 HP), controller model: TNC 124, Equipment: rotational speed infinitely variable, The milling machine advertised is being sold as defective. The reported error: Gross positioning error on the Z-axis. The machine is otherwise in good condition and was used exclusively for training purposes. The following parts were newly installed by the service department: -Supply module -Z-axis assembly with brake -Z-axis position measuring system - Wipers on all axes - Filter mats -Synchronous belts -X-axis position measuring system - Signal converter for the measuring system Iedpfewlqtfex Aabsih The total cost for maintenance and repairs was €15,000. The error is still present. Due to the age of the machine and the modernization of the workshop, repairs have been discontinued. You are welcome to inspect the machine. All information is provided without any warranty.

Condition: used, Year of construction: 1996, x-travel 400 mm y-travel 350 mm z-travel 400 mm tool taper SK 40 spindle turning speed range 1,0 - 4.000 U/min feeds 0 - 2000 mm/min quill stroke 60,0 mm table-size 650 x 350 mm T-slots 14 H7 Control TNC 124 engine output 5,5 kW weight 1800 kg dimensions of the machine ca. 2000 x 1000 x 2100 mm New price ~ 55.000 euros (!!) Furnishing : - Universal tool milling machine - HEIDENHAIN pattern control TNC 124 - The control panel can be swiveled to the right of the machine - hydraulic tool changer (DIN 69872) - Vertical milling head - SK 40 - X-axis feed .. 0 - 2000 mm / min - Y-axis feed .. 0 - 2000 mm / min - Feed Z-axis .. 0 - 2000 mm / min Ijdpfx Ajw U U Sisabjih - Central lubrication, electrical - coolant device - Chip tray - Operating instructions for machine + control Special accessories included: - hydraulic machine vice - many tool holders - HEIDENHAIN HR 410 electronic handwheel

Condition: excellent (used), Year of construction: 2002, Kunzmann WF4/3 Kunzmann WF4/3 Tool Milling Machine with Heidenhain TNC 124 Control, Year of Manufacture 2002 – Excellent CONDITION CE-compliant!! Technical Data: • Year of manufacture: 2002 • Fixed angle table • Spindle speed: infinitely variable up to 4000 rpm • Feed rates, infinitely variable in 3 axes: 0 to 2000 mm/min • Travel X/Y/Z: 400/350/400 mm • Rapid traverse X/Y/Z: 5 / 5 / 4 m/min • Table size: 650 x 350 mm • Table load: 250 kg • Vertical quill travel: 60 mm • Vertical and horizontal quill – SK40 • Hydraulic clamping system • Approx. weight: 1700 kg • Space requirements: approx. 2.3 x 2 x 2 m • Drive power: 12 KVA Accessories & Equipment: • Heidenhain TNC 124 Control • Hydraulic clamping vertical and horizontal • Automatic central lubrication • Spindle brake • Technical documentation, spare parts diagrams, control manual, and programming examples • Handwheels • Coolant system About the Machine: Offered is a Kunzmann WF4/3 tool milling machine equipped with a Heidenhain TNC 124 control unit. This universal milling machine is in excellent original condition. It comes from a facility where it was used only occasionally for training purposes. The control system is very user-friendly. Additionally, the machine features hydraulic clamping for both vertical and horizontal operations. Switching from vertical to horizontal operation is very simple, thanks to the fold-away vertical head. The guides are regularly lubricated via the central lubrication system. The Kunzmann has been mechanically and electrically tested in our facility. Take the opportunity to view and test the Kunzmann under power at our location. Iijdpfx Aasw U Exyjbeh You can find more milling machines from renowned manufacturers on our website.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Tool Milling Machine Kunzmann WF4/3 with Heidenhain TNC 124 Control, Year of Manufacture 2010, Excellent Condition with Tooling, CE-Compliant!! Technical Data: >> Year of manufacture: 2010 >> Fixed angular table >> Infinitely variable spindle speed up to 4000 rpm >> Infinitely variable feed on 3 axes from 0 to 2000 mm/min >> Travel (X/Y/Z): 400/350/400 mm >> Rapid traverse (X/Y/Z): 5 / 5 / 4 m/min >> Table surface: 650 x 350 mm >> Table load capacity: 250 kg >> Vertical quill stroke: 60 mm >> Vertical and horizontal quill - SK40 taper >> Hydraulic drawbar system >> Weight approx. 1700 kg >> Floor space required: approx. 2.3 x 2 x 2 m >> Drive power: 12 KVA Accessories and Equipment: >> Heidenhain TNC 124 control system >> Hydraulic clamping vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual for the control system and programming examples >> Handwheels >> Coolant system >> Tool holders, hydraulic vise, clamping tools About the Machine: Iiodpfx Aew Id Dzoaboh Offered here is a Kunzmann WF4/3 tool milling machine equipped with a Heidenhain TNC 124 control system. This universal milling machine is in very good original condition. It comes from a facility where it was only used occasionally for training purposes. The control system is very easy to operate. Furthermore, the machine features hydraulic clamping both vertically and horizontally. Conversion from vertical to horizontal is very simple, thanks to the swiveling vertical head. All guides are regularly lubricated via the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take the opportunity to view and test the Kunzmann under power at our facility.

Condition: used, Univ. NC tool milling machine KUNZMANN type WF 3/4 Machine. No. 341020 Year of construction 1998 Travel X: 400 mm Y: 320 mm Z: 400 mm Iiodpfxolvyrbe Aabeh Table size 650 x 350 mm Spindle holder SK 40 Spindle speed 40 - 2500 rpm. Feed rates X, Y and Z-axis 0 - 1000 mm/min. infinitely variable Rapid traverse X, Y-axis 4000 mm/min. Rapid traverse Z-axis 3000 mm/min. Vertical pinol adjustment 60 mm Drive power spindle motor 3 KW Mains connection 400 Volt, 50 Hz - CNC line control Heidenhain TNC 124 - Spindle speed via 2 gear stages and infinitely variable via electronically controlled variator gearbox - Vertical milling head can be tilted +/- 90 - Hydraulic tool clamping - Fixed angled table - Control cabinet fixed to the machine - Coolant tank with pump adjacent - central lubrication - central lighting Space requirement L x W x H 1800 x 1800 x 1900 mm Weight 1300 kg Good condition

Year of construction: 2001, condition: ready for operation (used), X-axis: 400mm, Y-axis: 350mm, Z-axis: 400mm, table dimensions: 650mm/350mm, tool holder: SK 40, spindle speed: 1-4000/min, quill stroke: 60mm, max. feed: 2000mm/min, control: Heidenhain TNC 124, connected load: 5.5kW, dimensions: 2000mm/1000mm/2100mm, weight: 1.8t. The machine is not functional, errors occur repeatedly: Problems with the movement monitoring of the Z and Y axes, gross positioning error on the Z axis, faults when moving the control housing. The operational readiness controller is missing and appears continuously when switching on. A reference run is possible after several attempts. The spindle gear is worn out. On-site inspection is possible. Iiodpfjuqacwjx Aabsh

Condition: excellent (used), Year of construction: 2009, operating hours: 2,542 h, functionality: fully functional, Kunzmann WF 4/3 Milling Machine TNC 320 Manufacturer: Kunzmann Model: WF 4/3 Milling Machine Year of manufacture: 2009 Condition: Used, from training workshop, cleaned, powered on, ready for demonstration Spindle hours: 2,542 h X travel: 400 mm Y travel: 350 mm Z travel: 400 mm Tool holder: SK 40 Spindle speeds: 1,000 – 4,500 rpm Feeds: 0 – 2,000 mm/min Quill stroke: 60.0 mm Table size: 650 x 350 mm T-slots: 14 H7 Control: TNC 320 Iiedpfew D D Sfjx Aabjh Motor power: 5.5 kW Weight: 1,920 kg Space requirement: approx. 2,000 x 2,000 x 2,100 mm Total connected load: approx. 7 kVA Central lubrication Coolant system CE compliant Scope of delivery: – Technical documentation – Full safety enclosure – LED machine lamp

Condition: used, Year of construction: 2001, functionality: limited functionality, travel distance X-axis: 400 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 2,000 m/min, feed rate Y-axis: 2,000 m/min, feed rate Z-axis: 2,000 m/min, quill stroke: 60 mm, rapid traverse X-axis: 5,000 m/min, rapid traverse Y-axis: 5,000 m/min, rapid traverse Z-axis: 4,000 m/min, total height: 2,000 mm, total width: 2,000 mm, total length: 2,000 mm, table width: 650 mm, table length: 350 mm, rotational speed (max.): 4,000 rpm, rotational speed (min.): 1 rpm, table load: 250 kg, overall weight: 2,000 kg, Equipment: documentation/manual, Machine condition: The machine is currently still in operation and is in working condition. Key features: Simple operation via TNC124 control Low-maintenance, robust machine design Manual drilling possible (linear machining only) Limitations: Limited machine geometry (somewhat imprecise) Relatively high oil consumption Additional information: Iijdpfx Asw Icwmsabeh Complete machine documentation available. 5 kW motor, SK 40 spindle, Heidenhain TNC124 control, vertical spindle and horizontal spindle - SK40, central lubrication, handwheels, coolant system.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Tool Milling Machine Kunzmann WF4/3 with Heidenhain TNC 124 Control Very Good Condition, CE-Compliant! Technical Data: >> Year of Manufacture: 2000 Machine No.: 343030 >> Fixed angle table >> Infinitely variable speed up to 4,000 rpm >> Infinitely variable feed in 3 axes from 0 to 2,000 mm/min >> Travel X/Y/Z: 400/320/400 mm >> Table size: 650 x 350 mm >> Table load: 250 kg >> Vertical quill stroke: 60 mm >> Vertical and horizontal quills – SK40 taper >> Hydraulic drawbar system >> Weight approx. 1,800 kg >> Space requirement approx.: 2.3 x 2 x 2 m >> Drive power: 13 KVA Equipment and Accessories: >> Heidenhain TNC 124 Control >> Hydraulic clamping vertical and horizontal >> Automatic central lubrication >> Spindle brake Ijdpowzu Sksfx Aabjih >> Technical documentation, spare parts diagrams, operating manual for the control, and programming examples >> Handwheels >> Coolant system About the machine: For sale is a Kunzmann WF4/3 tool milling machine equipped with a Heidenhain TNC 124 control system. This universal milling machine is in very good condition. It comes from a facility where it was only occasionally used for training purposes. The control is very easy to operate. Additionally, the machine is equipped with hydraulic clamping both vertically and horizontally. Switching from vertical to horizontal operation is very simple thanks to the swiveling vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically tested by us. Take the opportunity to inspect and test the Kunzmann under power at our site.