Milling machine

Kunzmann WF600M

Condition: used, Year of construction: 2013, functionality: fully functional, KUNZMANN WF 600M Milling Machine (2013) Manufacturer: KUNZMANN Type: WF 600M Milling Machine Year of manufacture: 2013 Condition: Used X/Y/Z: 600/400/400 mm Spindle taper: SK 40 Milling table clamping area: 800 x 425 mm Clamping slots: 6 slots, width 14 H 7 Slot spacing: 63 mm Maximum load: 300 kg Credpozy Srcsfx Ai Sjh Spindle speeds S I: 1 – 1125 min-1 Spindle speeds S II: 1126 – 4500 min-1 Feed rate: 0 – 2000 mm/min Rapid traverse X and Y: 5000 mm/min Rapid traverse Z: 4000 mm/min Hydraulic clamping system Main drive motor: 5.5 kW Weight: approx. 2000 kg - Dimensions: approx. 2 x 2 x 2 m

Condition: excellent (used), Year of construction: 2025, functionality: fully functional, operating hours: 600 h, power: 0.011 kW (0.01 HP), input voltage: 400 V, input frequency: 50 Hz, pressing force: 35 t, stroke length: 300 mm, operating speed: 180 mm/s, reverse speed: 180 mm/s, table width: 60 mm, table height: 100 mm, clearance between the columns: 1,375 mm, total length: 2,250 mm, total width: 1,820 mm, total height: 2,515 mm, overall weight: 4,900 kg, controller manufacturer: Lenze, controller model: SafanDarley E-Control, working width: 1,275 mm, bending force (max.): 35 t, back gauge: 1,000 mm, back gauge speed R-axis: 150 mm/s, back gauge travel distance R-axis: 150 mm, back gauge travel distance Z-axis: 1,000 mm, distance between stands: 1,375 mm, height adjustment type: electric, installation height: 1,000 mm, warranty duration: 12 months, control type: CNC control, number of axes: 7, actuation type: electric, Equipment: CE marking, safety light barrier, The E-Brake Premium 35t-1250 is the fastest servo-electric press brake on the market, manufactured by SafanDarley. Lenze servomotors controlled by frequency inverters from the same company enable fast and reliable operation of the system for many thousands of operating hours. The SAFANDARLEY E-Brake features a patented drive transmission method, which is implemented using reinforced belts. The roller system creates what is known as a multi-block or multi-pulley system. This principle has been known for years, but its successful implementation in SAFANDARLEY press brakes since 1995 has resulted in a press that is approximately 30% faster than hydraulic presses, quieter, more environmentally friendly, and eliminates the need for oil changes. Parameters: SAFANDARLEY servo-electric press brake, model E-Brake 35-1250 - Pressing force: 350 kN (35 tons) - Stroke: 300 mm - Opening: Q = 690 mm - Accuracy of the upper beam: +/- 0.01 mm - Max. bending speed: 10 mm/s - Max. speed of the back gauge fingers: 350 mm/s - Max. reach of the back gauge fingers (third point of reference): 1000 mm - Connected power: 11 kW - Machine width: 2225 mm - Machine depth: 1820 mm - Machine height: 2550 mm - Weight: 4,300 kg - Servo-electric drive (without hydraulic system) SAFAN E-Control – numerical control system - Dual 21'' color split-screen touchscreen (The lower part of the screen enables programming, and the upper part allows viewing PDF documentation, DXF files, or a 3D visualization of the bending process) - Swivel arm - ELO Touch technology EC20 – 2D graphics program, overlay for the E-Control control system CNC axes: Y1, Y2 – CNC-controlled axes X – CNC-controlled axis deltaX – CNC-controlled axis R – CNC-controlled axis Z1, Z2 – CNC axes Safety light guard – programmable light curtain: Basic function – safety Interruption operation function – 1 cycle / 2 cycles Curtains can be disabled in safe mode WILA NSCL I HC upper adapter – hydraulic upper tool clamping system Safan OBS/3 table – lower tool mounting system, compatible with Wila/Trumpf or Amada tools, table with a width of 60 mm and a 13 mm groove Ergonomic package: cutout in the table for working in a seated position, ergonomic tables, ergonomic chair E-Bend S system – sheet thickness measurement system with automatic deflection correction The machine is in like-new condition. Inspection, testing, and presentation are possible on-site – Sosnowiec. Crsdjr Axxzjpfx Ai Ssh Each unit undergoes a full technical inspection and quality testing by an authorized SafanDarley service center.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Kunzmann WF 600 M milling machine (2012) Cedpjztxndjfx Ai Sjrh Manufacturer: Kunzmann Type: WF 600 M Year of manufacture: 2012 Condition: used, very good Control: Heidenhain TNC 124 X-axis 600 mm Y-axis 400 mm Z-axis 400 mm Table length 650 mm Table width 350 mm Spindle speed 4500 rpm Vertical spindle and horizontal spindle - SK40 Hydraulic tightening system Main drive motor: 5.5 kW Dimensions approx.: 2 x 2 x 2 m Weight approx. 2000 kg Coolant system Scope of delivery: - Documentation - Machine light - Machine feet - Machine vice

Condition: excellent (used), Year of construction: 2014, Kunzmann WF 600 M Tool Milling Machine Kunzmann WF 600 M with Heidenhain TNC 124 Control Year of manufacture 2014 Excellent CONDITION CE-compliant!! Technical Data: Cedpfx Aisy Sihze Ssrh Year of manufacture: 2014 Fixed angle table Spindle speed: continuously variable up to 4000 rpm Feeds: stepless in 3 axes from 0 to 2000 mm/min Travel X/Y/Z: 600/400/400 mm Rapid traverse x/y/z: 5 / 5 / 4 m/min Table size: 650 x 350 mm Table load: 250 kg Vertical quill travel: 60 mm Vertical and horizontal spindle, SK40 Hydraulic clamping system Weight approx. 1700 kg Space requirement approx.: 2.3 x 2 x 2 m Drive power: 12 KVA Accessories and Equipment: Heidenhain TNC 124 control Hydraulic clamping vertical and horizontal Automatic central lubrication Spindle brake Technical documentation, spare parts diagrams, operating manual for the control and programming examples Handwheels, coolant unit, tool holders, vise About the Machine: Offered here is a Kunzmann WF 600 M tool milling machine equipped with a Heidenhain TNC 124 control. This universal milling machine is in very good original condition. It comes from a facility where it was only lightly used for training purposes. The control is very easy to operate. Furthermore, the machine features hydraulic clamping both vertically and horizontally. Converting from vertical to horizontal is straightforward, simply by swinging away the vertical head. The guides are reliably lubricated via central lubrication. The Kunzmann has been mechanically and electrically tested at our facility. Take the opportunity to inspect and test the Kunzmann under power at our premises. You can find more milling machines from renowned manufacturers on our website.

Condition: used, TECHNICAL DETAILS - center height : 100 [mm] - Distance between centers : 650 [mm] - Max. table orientation : [°] - Travel : 650 [mm] - Speed : 100 - 3500 [mm/min] GRINDING WHEEL HOLDER HEADSTOCK - Orientation : [°] - T1 grinding wheel dimensions : 350 x 32 x 127 [mm] - Power : 3 [kW] - Speed : 1600 - 2200 [rpm] - Peripheral speed : [m/s] PART-HOLDER HEADSTOCK - Spindle speeds : - 1200 [rpm] - Power : 0.5 [kW] - Type of cone : CM4 - Max. part weight : 20 [kg] - Orientation : 0 - 90 [°] POWER SUPPLY - Supply voltage : 400 [V] - Power : 8 [kVA] Csdpfx Aioyn R I He Serh WEIGHT & DIMENSIONS - Machine floor space : 00 x 00 [mm] - Machine height : 1650 [mm] - Machine weight : 1900 [kg] MACHINE HOURS - Number of hours under power : 01 [h] EQUIPMENT - Sony LG20-2 display - Automatic contact detection : SENSITRON 6 - 1 tailstock with fine adjustment - 1 internal grinding spindle - Fixed dressing device - Coolant tank - 1 three-key steady rest

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 3,300 rpm, spindle motor power: 30,000 W, overall weight: 9,100 kg, controller manufacturer: MAZATROL, controller model: Mazatrol Matrix, number of axes: 3, This 3-axis Mazak QT Nexus 350 II M was manufactured in 2008. It features a Mazatrol Matrix control unit, a maximum swing over bed of Ø 830 mm, and a turning length of 1500 mm. The spindle supports speeds up to 3300 rpm with a power of 30 kW. It includes a chip conveyor and tool presetter. If you are looking to get high-quality turning capabilities, consider the Mazak QT Nexus 350 II M machine we have for sale. Contact us for more information. Additional equipment • Chip conveyor • Tool presetter • Autoblock chuck • Toolholders • User and maintenance manuals Machine Benefits Technical Machine Benefits • Max. Turning diameter: Ø 420 mm • Max. Turning length: 1500 mm • Bar capacity: Ø 102 mm • Spindle nose: asa 11” • Chuck type: autoblock Ø 315 mm • Tool size: 25 × 25 mm / Ø 50 mm Cjdpex D I Risfx Ai Serh • Driven tool motor power: 7. 5 kw • Max. Speed of driven tools: 4000 rpm Extra Information Machine still under power

Condition: new, Year of construction: 2025, x-travel 580 mm y-travel 200 mm z-travel 340 mm speeds 115 - 1750 U/min table surface area 1000 x 240 mm tool taper ISO 40 total power requirement 4,5 kW weight of the machine ca. 820 kg Csdpstv Riasfx Ai Serh dimensions of the machine ca. 1290 x 1090 x 2170 mm Universal precision drilling and milling machine for horizontal and vertical milling work with digital 3-axis position display DPA 31 Plus Description: - Heavy, solid design made of high-quality, vibration-absorbing gray cast iron - Oil bath gear with ground, hardened gear wheels - Coolant system - Halogen machine lamp with bundled beam - Solid and large cross table, precisely surface-machined with T-slots and adjustable wedge strips - Milling head can be tilted ± 45° - Right/left rotation - X-axis moves either with the handwheel or via the table feed device - Automatic limit switch on the X-axis - Height-adjustable protective screen with microswitch, against flying chips and parts, for the greatest possible protection of the user Scope of delivery: - Gear rim drill chuck 1 - 16 mm / B 18 - Arbor drill chuck ISO40 / B18 - Horizontal milling spindle with counter bearing, disc milling cutter holder Ø22 mm, Ø27 mm - Adapter ISO 40/MK3 - Adapter ISO 40/MK2 - Vertical and horizontal drawbar - T-slot nuts - Drifter - Operating tool

Condition: used, Year of construction: 2014, total length: 1,500 mm, total width: 1,150 mm, total height: 2,400 mm, Weight: 3.600 kg - Year: 2014 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 441 Crodpfsxapftex Ai Soh - Power [kW]: 3.0 - Press force [ton]: 28 - Max. working width [mm]: 1000 - Column gap [mm]: 950 - Throat depth [mm]: 220 - Backgauge depth [mm]: 415 - Transport dimensions: 1500mm x 1150mm x 2400mm (l x w x h) - Transport weight [kg]: 3600kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 1992, machine/vehicle number: 19703, Offer 22584 Technical data: Codpop H Tu Ejfx Ai Sorh - Welding current 320 A 60% ED - 270 A 100% ED - Welding current adjustable in 42 steps 40 A - 320 A - Digital volt + ampere display - Separate wire feed case with hose package approx. 1 lfm - intermediate package machine - wire feed case approx. 1,5 m - 4 roller wire feed steplessly adjustable - 2 stroke - 4 stroke - regulation - Spot welding - welding length / welding time adjustment - wire back firing adjustment - ground cable - pressure reducer - connection 400 V / 32 A / 18 kVA - Space requirement approx. W 550 x H 1200 x D 1100 mm - Weight approx. 300 kg

Condition: good (used), Year of construction: 2008, feed length X-axis: 400 mm, feed length Y-axis: 250 mm, feed length Z-axis: 400 mm, Heidenhain TNC 124 control quill electronical hand wheel coolant device Technische Daten: Längsweg (X-Achse) / X-travel longitudinal 400 mm Querweg (Y-Achse) / Y-travel cross 250 mm Senkrechtweg (Z-Achse) / Z-travel vertical 400 mm Tischaufspannfläche / table clamping area 600 x 320 mm Werkzeugaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed range 30-6300 UpM Crsdjrb A Tcjpfx Ai Soh Vorschub x,y,z / feed x,y,z 10,10,8 m/min. Antriebsleistung gesamt / drice capacity 6,5 kW Gewicht ca. / weight ca. 1200 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.