Used 2-Phase-Decanter for sale (79,710)

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Edge Control control system with 18.5" touchscreen color monitor 16:9 Swiveling operator panel, Program storage, Motorized pressure bar adjustment, Feed via transport chain, Feed speed: 8-18 m/min Extendable workpiece support, Infeed fence with motorized adjustment Jointing unit 1961, Diamond jointing cutter for climb and counter rotation, Automatic adjustment to workpiece height Edge feed 1903 Pre-trimming up to 3 x 45 mm (depending on material) Glue application system 1905 Multi-System Automatic glue height adjustment with sensor nozzle, Gbodpev Sv Ensfx Ag Ser Pressure regulator for adjusting the cartridge contact pressure, Use of PUR adhesives possible, Pressure unit 1913 MOT, First roller driven End trimming unit 1918 with pneumatic adjustment End trim saw pneumatically swiveling, Multifunction unit 1824 MOT 4 with multifunction cutter radii 1,2,3 mm Corner copying unit 1832 Corner copying up to 3 mm edge thickness Radius scraper 1929 MOT 2 With motorized adjustment of horizontal tracing rollers With pneumatic adjustment (top and bottom separate) Chip collection box for radius scraper, Surfacing scraper 1964 For removing glue residue for a clean glue line With extraction hoods Spray unit 1856 for infeed and outfeed area Buffing unit 1940 For finishing and edge polishing ----- Technical Data ----- Edge thickness roll material: 3 mm, Edge thickness strip material: 8 mm, Max edge thickness for corner copying: 3 mm, Workpiece thickness: 45 mm, Workpiece thickness for corner copying: 45 mm, Min. workpiece length: 180 mm, Feed speed: 8-18 m/min, Distance workpiece support: 470 mm, Support table diameter for edge material: 800 mm, End cut knife for coiled material up to: 3 mm, Heating time: 3.5 min, Jointing unit power: 2 x 2 kW, End trim saw power: 2 x 0.22 kW, Milling station power: 2 x 0.35 kW, Corner copying power: 0.22 kW, Extraction port jointing unit: 120 mm, Extraction port milling unit: 70 mm, Extraction port scraper unit: 70 mm, Total length: 5,350 mm, Dimensions (LxWxH): 5,350 x 1,669 x 1,940 mm Picture of operating hours taken from a recording in 2022 Availability: short term Location: Röllbach

Condition: excellent (used), Catalogue number: 7840 TECHNICAL DATA - Max. workpiece width: 630mm - Max. workpiece height: 110mm - 2 units: 1) Grooved rubber roller for calibration 2) Grooved rubber roller for calibration + pad + metal roller - Top section: - Metal infeed roller, slip type - Unit - Metal slip roller - Unit - Metal slip roller - Bottom section: - 2 metal slip rollers Gbedpfxezr I Ano Ag Sjr - Feed belt - 2 metal slip rollers - Pneumatic oscillation of belts - 2 feed speeds - Motor: 2×7.5kW - Electric table lift - Operating pressure: 6-8 bar - Extraction port diameter: 2x160mm - Overall dimensions (LxWxH): 1650x1060x1970mm - Weight: 972kg ADVANTAGES – Polish-made – 2 processing units – Not repainted – Very good condition – Used sander Net price: 20,900 PLN Net price: 4,980 EUR (calculated at 4.2 EUR) (Prices may change with larger exchange rate fluctuations)

Condition: excellent (used), Year of construction: 2006, load capacity: 130 kg, arm reach: 2,900 mm, controller manufacturer: KUKA, controller model: KRC2, This system is equipped with a KUKA KRC2 control unit and features the KR 150 L130-2 2000 robot model. Gsdpfx Agjw Idw Ij Sobr The robot offers a payload capacity of 130 kg and a reach of 2900 mm. It is suitable for high-precision applications. Main application areas: Spot and arc welding Heavy-duty material handling Palletizing CNC machine tending Press automation The robot is designed for reliable operation in demanding industrial environments. Model: KR 210 L150-2 2000 KRC2 ed05 Payload: 130kg Arm Reach: 2900 mm Condition: Used & Tested Year: 2006 Controller Cabinet: KRC2 ed05 Included: Manipulator + KRC2 ed05 Control Cabinet + All Wire Sets + Teach Pendant As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and designs for your specific production needs. ( Source : Kuka's Website )

Condition: ready for operation (used), Year of construction: 2007, load capacity: 200 kg, arm reach: 2,700 mm, controller manufacturer: KUKA, controller model: KRC2 ED05, Compact, extremely fast and with a unique combination of payload and reach: these attributes make KUKA comp series robots are the obvious choice for a wide range of applications – e.g. handling or spot welding. Model: KR200-2 COMP Payload: 200 kg Reach in mm : 2700 mm Condition: Used & Tested Year: 2007 (Multiple options available) Included: Manipulator + KRC2 ed05 Cabinet + Teachpendant + All Wire Sets PLC MERKEZI Refurbishment Services Include with additional cost: Gsdpfxozl Si Se Ag Sjbr • Cleaning: The surface of the robot panel and the robot has been cleaned. • Oil Changing: The oils of all axes (6 axes) of the robot have been replaced. • Battery Changing: All batteries have been replaced with the new ones. • Mechanical Maintenance: Gear wheels counter balance are checked and maintained after weight, repeatability tests. • Electronical Maintenance: Includes drivers, electronic boards, teach pendant and PC maintenance. • Polishing and Repainting: After the cleaning the robot gets polished and be painted to its original colour, can be painted to the colour that you desired. Shipment expenses are not included in the price Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands.We also offer custom engineering services and design for your specific production needs. (Source: Kuka's Website)

Condition: excellent (used), CATALOGUE NUMBER 7998 Technical data: - spindle diameter 30mm - spindle working height 120mm - interchangeable spindle Gjdpfx Ajzrw U Heg Sobr - spindle locking - adjustable up/down - original cast iron guide with full adjustment - original cast iron carriage with material clamping device + angle fence - 4 types of rotational speeds + right/left 3000, 4500, 6000, 9000 rpm - table dimensions 1020x1000mm - angle fence on the table - with brake - motor 5.5kW - dust extraction port diameter 100mm, 120mm - dimensions (L/W/H) 2200x1320x1310mm - weight 966kg Advantages: - Polish production - side carriage - angle fence on the table and on the side carriage - used milling machine, very good condition Net price: 13900 PLN Net price: 3310 EUR, depending on the exchange rate of 4.20 EUR (Prices may change due to significant fluctuations)

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, total length: 7,800 mm, total width: 2,200 mm, overall weight: 2,100 kg, 2020 HEBBECKER VERSAJET II VJ-II-2-9090-4180 – Industrial Gas-Heated Textile Tunnel Dryer Gsdpfxoy Ty Sgo Ag Sobr Professional industrial HEBBECKER VERSAJET II gas-heated textile tunnel dryer, manufactured in 2020 and designed for continuous, high-volume textile screen-printing production. The machine is equipped with a dual conveyor belt system (2 × 850 mm), allowing two production lanes to be used simultaneously. The touchscreen control panel provides convenient adjustment of the conveyor settings and drying temperature. The direct gas-heating system provides fast heat-up, high efficiency and uniform curing, while keeping electrical energy consumption very low compared with conventional electrically heated dryers. Key Features Manufacturer: HEBBECKER GmbH Model: VERSAJET II VJ-II-2-9090-4180 Year of manufacture: 2020 Serial No.: 2001948 Machine type: Industrial textile tunnel dryer Heating system: Direct gas heating Gas heating capacity: 40 kW Dual conveyor belt: 2 × 850 mm Heating zone length: 5,565 mm Electronic temperature control Temperature stability: ±2°C Fast heat-up time Designed for continuous industrial production Suitable for textile screen-printing curing and drying Heavy-duty industrial construction Low electrical energy requirement Quiet operation Dual Conveyor System The VERSAJET II is equipped with two separate conveyor belts, providing two parallel production lanes. The touchscreen interface provides individual conveyor settings, making the dual-belt configuration particularly useful when processing different garments, print types or production batches simultaneously. Energy Efficiency The dryer uses direct gas heating without a heat exchanger, allowing the gas energy to be transferred efficiently into the drying process. According to the manufacturer's specifications, the system can provide more than 50% energy savings compared with electrically heated dryers, depending on operating conditions and configuration. Technical Data Electrical supply: 400 V / 3-phase / 50 Hz Electrical power: 3.2 kW Current: 5.1 A Fuse: 16 A Gas heating capacity: 40 kW Gas pressure: 30 mbar Conveyor configuration: Dual belt Belt width: 2 × 850 mm Heating zone length: 5,565 mm Machine weight: approx. 2,100 kg The HEBBECKER VERSAJET II is an excellent solution for professional textile printing companies looking for a high-capacity, energy-efficient gas dryer with a dual conveyor system. Machine available for inspection.

Condition: used, Year of construction: 2000, Insulated, steam-heated V4A stainless steel tanks, most recently used as CIP cleaning tanks. Additional title: vertical, conical stainless steel tanks Capacity: 3000 l/tank Width: 1,55 m Gbedpfezty H Iox Ag Sor Height: 3 m Weight: 600 kg Material: V4A stainless steel Position: vertical, standing on feet Base construction: cylindrical tanks with dished top and conical bottom Features: 2 stainless steel tanks 30 hl each, insulated, heatable by steam

Condition: used, Year of construction: 2006, functionality: fully functional, turning diameter over cross slide: 325 mm, spindle bore: 83 mm, turning length: 2,000 mm, turning diameter: 570 mm, total length: 3,950 mm, total width: 1,900 mm, workpiece weight (max.): 1,600 kg, overall weight: 4,300 kg, travel distance X-axis: 340 mm, travel distance Z-axis: 2,000 mm, Selling a used Weiler E55 lathe with a 2m center distance. Year of manufacture: 2006 Control system: Weiler cycle control D3 Technical data: Gsdpfxjztathe Ag Ssbr Center distance: 2000mm Center height: 280mm Swinging diameter over bed: 570mm Swinging diameter over cross slide: 325mm Spindle bore: 83mm Spindle speed: 1-2500 rpm 2 gear stages Tailstock internal taper of the quill: MK5 Quill travel: 200mm The cross slide in the Z-axis was replaced in 2025. The machine is powered and can be inspected and tested. Accessories: Capto tool holder Coolant pump Chip tray Machine feet 3-jaw chuck Lynette Documentation

Condition: used, Year of construction: 1991, 2 vertical stainless steel tanks with dished bottoms, shell cooling zone, manhole, sampling tap, insulation and central outlet. Additional title: 2 insulated, coolable tanks Volume: 44361 l Operating pressure: 0,9 bar Operating temperature: 20 °C Gbsdpoztya Ujfx Ag Ser Material: stainless steel Position: vertical Base construction: cylindrical tank with dished bottoms, placed an 4 square tube feet Features: insulated, covered, 1 cooling zone (183 l, 0.9 bar), manhole, safety valve, CIP pipe with spray head, manometer, yeast plug Periphery: own temperature control

Condition: used, Year of construction: 1991, 2 vertical stainless steel tanks with dished bottoms, shell cooling zone, manhole, sampling tap, insulation and central outlet. Additional title: 2 insulated, coolable tanks Volume: 44916 l Operating pressure: 0,9 bar Operating temperature: 20 °C Width: approx. 4650 mm Height: approx. 4130 mm Weight: 5000 kg Material: stainless steel Position: vertical Base construction: cylindrical tank with dished bottoms, placed an 4 square tube feet Features: insulated, covered, 1 cooling zone (183 l, 0.9 bar), manhole, safety valve, vacuum valve, CIP line with spray head, manometer, yeast plug Periphery: own temperature control Gbedjztya Iepfx Ag Sjr

Condition: used, Year of construction: 1992, 2 vertical stainless steel pressure tanks with 2 cooling zones and various fittings. Most recently used as storage tanks for beer. Additional title: Vertical, coolable stainless steel pressure tanks Capacity: 17522 l Operating pressure: 2 bar Gjdpfxsztyazj Ag Sjbr Material: Stainless steel Position: Vertical Base construction: On feet Features: Manhole, 2 cooling zones, sampling valve, safety valve, pressure indicator, 2 hole cleaning-air-valve combination

Condition: used, Year of construction: 2001, 2 vertical stainless steel tanks with dished bottoms, shell cooling zone, manhole, sampling tap, insulation and central outlet. Additional title: 2 insulated, coolable tanks Volume: 32191 l Operating pressure: 5 bar Operating temperature: 20 °C Width: approx. 3850 mm Height: approx. 4420 mm Material: stainless steel 1.4301 Position: vertical Gbsdeztyanjpfx Ag Sor Base construction: cylindrical tank with dished bottoms, placed an 4 square tube feet Features: 1 cooling jacket (154 l, 2 bar, glycol), outlet DN65, manhole, safety valve, CIP pipe with spray head, manometer, ladder bar, sampling, temperatur sensor (PT100), crane eyelets Periphery: own temperature control

Condition: excellent (used), CATALOGUE NUMBER 7967 TECHNICAL DATA - max. width of workpiece: 1100 mm - max. height of workpiece: 170 mm 2 units: 1) metal grooved roller for calibration 2) grooved rubber roller + shoe + metal roller – from above: - slip rubber roller - unit (two units on one motor) 15 kW - slip rubber roller - take-off rubber roller - tape blowing – from below: - 2 slip metal rollers Gbodpfxezruttj Ag Ser - conveyor belt - 2 slip rubber rollers - pneumatic tape oscillation - grinding thickness potentiometer - electric table lifting + manual (for precise adjustment) - pneumatic brake - 2 feed speed types - working pressure 6-8 bar - dust extraction nozzle diameter 2x140 mm - overall dimensions L/W/H 1830x1670x1950 mm - weight 1160 kg ADVANTAGES - Made in Italy - 2 grinding units - Unpainted - Used sander, in perfect condition Net price: 72900 PLN Net price: 17357 EUR, depending on the exchange rate of 4.2 EUR (Prices may vary due to higher fluctuations)

Condition: excellent (used), Year of construction: 1974, Catalogue number 7685 TECHNICAL DATA - feed opening width: 440mm - feed opening height: 300mm - shaft width: 480mm - shaft diameter: 440mm - number of knives: 2 pcs - screen size: 50x50mm - toothed feed roller from top and bottom - shaft motor: 0.78/1.1kW - electric auto-reverse (adjustable) - with conveyor belt - feed belt length: 4006mm - feed belt width: 380mm - belt feed forward/reverse - main motor: 30kW - dimensions (L/W/H): 6100x1100x1100mm - weight approx. 2000kg ADVANTAGES – German-made – with conveyor feeder – auto-reverse – used chipper, in very good condition Net price: 76,900 PLN Net price: 18,300 EUR depending on the exchange rate of 4.2 EUR (Prices may change with significant fluctuations) Gjdpfxezruc Uo Ag Sobr

Year of construction: 2019, condition: used, 2-vessel brewhouse with stainless steel brewing vessels, mounted on a brewing block. The brewing block consists of the following components: 1. Mash and wort kettle, steam-heated (bottom heating zone with perforated weld + internal boiler), insulated, with a gross volume of 15 hl. The kettle is equipped with a continuously adjustable, top-driven agitator. The boiling vapours are extracted by a kettle fan into a vapour condensation pipe fitted with Lechler nozzles. The kettle also features a CIP spray head and a digital thermometer. 2. Mashing and lauter tun, insulated, with a continuously adjustable rake, inlets and outlets for wort and thick mash, spent grain flap, lauter floor (designed as a slotted screen floor), mash/wort pump and digital thermometer. Cleaning nozzles are fitted for internal cleaning and rinsing. For hot trub separation, the vessel also features a tangentially fed whirlpool nozzle. 3. Control cabinet with control panel 4. Various pipework, valves and sensors. The system is equipped with a two-stage plate heat exchanger for wort cooling at 1,000 l/h and a wort aeration device. In addition, a 20-hectolitre insulated stainless-steel tank with a heating jacket and a booster pump is available for use as a hot-water storage tank. Additional title: brewing block with stainless steel brew vessels Mash and wort pan net capacity approx.: 1000 L hot wort Mash and wort kettle inner diameter approx.: 1000 mm Mash and lauter tun inner diameter approx.: 1250 mm Height up to hood door approx.: 1 m Power: 4 kW Voltage: 400 V Frequency: 50 Hz Gbodpfx Aeztwz Aeg Sor Operation / Control: “Braupilot” HMI control via touch screen Material: Stainless steel 1.4301 Base construction: Thanks to its modular design, the entire brewhouse is very compact and can be integrated individually and space-savingly into the guest area. Features: Mash and wort kettle with bottom heating and internal cooker, mash and lauter tun with whirlpool nozzle (combination vessel), hot water tank, wort cooling, wort areation, fittings, pumps, pipes

Condition: used, empty load weight: 3,142 kg, maximum load weight: 14,858 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 08/2021, suspension: air, tire size: 265/70R19,5, color: other, gearing type: other, front tire size: 265/70R19,5, rear tire size: 265/70R19,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Slider-type roll-off container trailer, pneumatic locking system for containers, -- subject to printing errors, mistakes, and changes, sample images --, more data available at: !, More Details: ! Gbjdpfx Aozt Rv Tog Sor

Condition: used, empty load weight: 3,590 kg, maximum load weight: 10,810 kg, overall weight: 14,400 kg, axle configuration: 2 axles, first registration: 06/2020, loading space width: 5,040 mm, loading space height: 2,420 mm, suspension: steel, tire size: 285/70R19,5 150J, color: other, gearing type: other, front tire size: 285/70R19,5 150J, rear tire size: 285/70R19,5 150J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, front for through-loading, lashing eyes, surcharge for ramps: 1,000 EUR, subject to printing errors, errors and changes, sample images, more details at: ! Gedszt I Sxspfx Ag Ssbr

Condition: used, Year of construction: 1995, Product information "ABUS wall-mounted slewing crane" Wall-mounted slewing crane Abus Type / Model GM 2 320.6-1/LF 6 Condition Used Year of manufacture 1995 Gbodpfxoztxz Ds Ag Ser Technical data Load capacity (single-fall) 320 kg Lifting speed (fine lift) 1.5 m/min Lifting speed (main lift) 6.0 m/min Motor power (fine lift) 0.09 kW Motor power (main lift) 0.35 kW Chain dimension 5 x 15 mm Operating voltage 400 V / 50 Hz Inquiry item! Transportation costs will be provided in a separate offer.

Condition: excellent (used), CATALOGUE NUMBER 8032 Gbodpfx Asziaxvog Ser TECHNICAL DATA - max. width of the workpiece: 970mm - max. height of the workpiece: 160mm - 2 units - 1) ribbed rubber roller - 2) two metal rollers + shoe - motor power of unit I and II: 11kW - total power: 12kW - brake * from above: - metal roller, slip - pressure roller - unit - metal roller, slip - pressure roller - unit - metal roller, slip * from below: - rubber roller, slip - conveyor belt - pneumatic belt oscillation - electric table lifting - 2 feed speed settings - feed motor approx. 0.75kW - working pressure: 8-10 bar - diameter of the extraction nozzle: 2x160mm - overall dimensions (L/W/H): 1600x1500x2000mm - weight: 1370kg ADVANTAGES - Made in Italy - 2 units - Unpainted - Used sander, very good condition Net price: 21900 PLN Net price: 5200 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary with higher fluctuations)

Condition: used, Model: HOLZ-HER 100 L-2 Cutting length: 5,300 mm Cutting height: 2,100 mm Power: 3 kW S1 / 4 kW S6 ED 40% Voltage: Y 380 V, 3~ 50 c/s Speed: 2840/3740/min Fully functional This saw is ideal for rough cutting. Gbsdpfxezt Dy Se Ag Ser Availability: short notice Location: near Mannheim

Year of construction: 2014, condition: like new (used), COOLING (DEEP FREEZING) HORIZONTAL TUNNEL (Instruction manual added) Gjdpfeyf Hliox Ag Sebr Liquid nitrogen deep-freezing of foodstuffs Model ZIP FREEZ SILVER LINE 2 type 90X12 Overall dimension in m: Lengh 10,30 Width 2,30 Height 1,81 Height in cleaning position 2,31 Deep-freezing chamber Lengh 8,70 m Effective width 1,20 m Height 0,25 m Surface in m2 10,44 Weight 3200 kg Made by SEPAR, France Was used for cooling of the hot filled desserts In complete with Associated Controls, Conveyor and Pipework

Condition: ready for operation (used), Year of construction: 2016, spindle motor power: 1,700 W, spindle speed (max.): 3,600 rpm, This 3-axis VITAP POINT 2 CNC processing center was manufactured in 2016. It features a unique patented belt transport system for uninterrupted panel movement and a maximum panel size with no limits. The machine includes 9 vertical independent spindles and offers high productivity with zero setup time. If you are looking to get high-quality drilling and grooving capabilities, consider the VITAP POINT 2 machine we have for sale. Contact us for further details. Gbodpezt Aydefx Ag Ssr • Number of spindles: 9 vertical independent spindles; 2+2 horizontal spindles on X axis; 1+1 horizontal spindles on Y axis • Drilling depth: 45 mm • Number of Axes: 3 • X-Axis: Uninterrupted movement of the panel due to a patented belt transport system; no limit in panel length • Y-Axis: 920 mm • Z-Axis: 50 mm • Rapid Traverse: 25 m/min • Max tool diameter: 35 mm vertical; 12 mm horizontal • Used CNC boring machine • Year of manufacture: 2016 • Smart solution for throughfeed drilling and grooving with automatic panel return to operator • Latest generation motor and ball screw on Z axis • Perfect for batch 1 • Setup time = 0 • High productivity and flexibility • Easy TPA programming • Cutting optimization software • Graphics programming CAD TPA, base version • Saving all files with all data • Macro programming • Import DXF files • Control: Full Parametric • Office programming software TPA • 1 blade for grooving • Min. size of the panel X 270/400 mm, Y 150 mm, Z 10 mm • CE standards • The technical data and descriptions are copies of the order confirmation at the time • The information is for informational purposes only and is not binding

Condition: new, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,600 mm, loading space width: 2,550 mm, suspension: air, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Loading height approx. 980 mm, 20 x lashing eyes each 6 t, 20 x lashing brackets each 6 t, 18 x lashing holes, 7 x stake pockets, central, 14 x stake pockets in the outer frame, 2 pairs of container locks, surcharge for front wall approx. 1,600 mm high, plug-in price: 1,500 ¤, surcharge for extendable drawbar price: 1,500 ¤, surcharge for 4 x warning signs with lighting price: 800 ¤, , Also available in loading area length 8,600 mm!?, , , , , --  Misprints, errors and changes excepted, sample images --, More data at: !, More details: ! Gbsdpfx Aeztnugjg Ser

Condition: new, empty load weight: 4,580 kg, maximum load weight: 14,420 kg, overall weight: 19,000 kg, axle configuration: 2 axles, loading space length: 5,700 mm, loading space width: 2,420 mm, loading space height: 1,800 mm, loading space volume: 24 m³, suspension: other, tire size: 435/50 R 19,5, color: other, gearing type: other, front tire size: 435/50 R 19,5, rear tire size: 435/50 R 19,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Three-sided tipper, loading area approx. 5,700 mm x 2,420 mm, side walls 600 mm + 2 x 600 mm extension side walls, total side wall height approx. 1,800 mm, side walls hot-dip galvanized, loading height approx. 1,080 mm, 12 x lashing eyes in the floor, reinforced gearbox support winch with load and fast gear at the front, 2 x folding supports at the rear, 435/50 R 19.5, chassis and tipper body hot-dip galvanized, surcharge for: aluminum ramps, price: 1,900 euros, -- printing errors, errors and changes excepted, sample images --, more data at: !, More Details: ! Gjdpfoztnqhjx Ag Sebr

Condition: excellent (used), Year of construction: 2013, operating hours: 1,50,494 h, functionality: fully functional, GRAF welding and cleaning line, year 2013. Working direction from left to right. SL4U four-head welding machine, max. dimensions 2800 x 3200 mm, min.400 mm, flash 0.2 mm. WP CNC 2 TR cleaning machine. Cooling station. Knives for cleaning flat, grooved and smooth surfaces. It has only performed 150,494 cycles - very good technical condition. Gedpjyyxvwjfx Ag Sobr