Used 2-Phase-Decanter for sale (81,517)

Condition: used, tank capacity: 6,050 l, GENERAL Equipment: Crane lugs Design: Rectangular Remarks: 2 cooling plates inside the tank; 1 manhole approx. 340 x 440 mm in the front bottom; 2 feet reinforced (see photos) Lrodpfx Adoyckt Sswsg Overall width: 1,070 mm Overall height: 2,550 mm Overall length: 3,250 mm Heating/Cooling: available Location: Bremen Volume: 6,050 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last intended use: wine storage TANK Support type: feet Number of feet: 4 pieces HEATING/COOLING JACKET Internal temperature control: Cooling plate EQUIPMENT Outlet: DN50 DIN 11851 MATERIAL SPECIFICATION Material (temperature control system): V2A 1.4301 (AISI304) Feet material: Stainless steel

Condition: used, tank capacity: 8,310 l, GENERAL INFORMATION Equipment: Crane lugs Design: rectangular Remarks: Each tank contains 2 cooling plates inside; 1 manhole approx. 340 x 440 mm in the front base; some feet are shimmed (see photos) Total width: 1,420 mm Total height: 2,550 mm Total length: 3,200 mm Heating/Cooling: available Location: Bremen Volume: 8,310 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Previous application: wine storage TANK Ljdpfxoyckt Ee Adwerg Mounting type: feet Number of feet: 4 HEATING/COOLING JACKET Internal tempering: cooling plate EQUIPMENT Outlet: DN50 DIN 11851 MATERIAL SPECIFICATION Material of tempering system: V2A 1.4301 (AISI304) Feet material: stainless steel

Condition: used, tank capacity: 8,750 l, GENERAL Lrsdpfx Adsycktroweg Design: rectangular Comments: Each tank contains 2 cooling plates inside; 1 manhole approx. 300 x 400 mm in the front bottom; feet equipped with loose, height-adjustable spherical cap screws (possibly not all feet complete; cap screws not included in the total height, total height will increase accordingly if used); feet are slightly off-set Overall width: 1,620 mm Overall height: 2,700 mm Overall length: 2,950 mm Heating/Cooling: available Location: Bremen Nameplate: Volume: 8,750 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last use: wine storage TANK Mounting: feet Number of feet: 4 pcs HEATING/COOLING JACKET Temperature control inside: cooling plate EQUIPMENT Outlet: DN40 DIN 11851 MATERIAL SPECIFICATION Temperature system material: stainless steel Foot material: stainless steel

Condition: excellent (used), Trumpf TruTool C160- 2 Plus electric slitting shear Lsdpfx Asuhm Rbedwsrg Shears very good condition.

Condition: excellent (used), CATALOG NUMBER 7850 Technical data: - Maximum workpiece width: 1100 mm - Maximum workpiece height: 160 mm 2 working units: 1) Grooved rubber calibration roller 2) Grooved rubber roller + pneumatic segmented pad + steel roller - Motor power: 15 kW - Brake - From above: - Split, non-slip rubber feed roller - Working unit - Split, non-slip rubber feed roller - Working unit with segmented pad - Split, non-slip, outfeed rubber roller - Cleaning brush - From below: - 2 non-slip steel rollers - Feed belt - 2 non-slip, outfeed steel rollers - Pneumatic belt oscillation controlled by photocell - Electric table height adjustment - 2 feed speeds - Feed motor power: 0.75 kW - Sanding thickness potentiometer - Working pressure: 8–10 bar Lrjdpfxsx Hhy Sj Adwjg - Dust extraction port diameter: 3 x 165 mm - Overall dimensions (L/W/H): 1900 x 1700 x 1930 mm - Weight: approx. 1,502 kg ADVANTAGES – Italian production, SCM brand – 2 working units – Sanding thickness potentiometer – Pneumatic segmented pad – Original paint (not repainted) – Technical documentation (DTR) – Used sander, very good condition Net price: 32,900 PLN Net price: 7,830 EUR Net price calculated at the rate of 4.2 PLN/EUR (price may change in the event of significant exchange rate fluctuations)

Condition: used, tank capacity: 42,000 l, GENERAL INFORMATION Equipment: Level indicator (no guarantee), spray head Construction: horizontal Speed: 975 rpm External diameter: 3,000 mm Total width: 3,100 mm Total height: 4,050 mm Total length: 6,900 mm Agitator manufacturer: Stelzer Power: 11 kW Agitator: propeller Agitator element: propeller Location: Outdoor storage Volume: 42,000 liters Product contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical length: 5,900 mm Lrsdpfxjyciz Uo Adwjg Previous application: foodstuffs TANK Ends: dished ends (Klöpperboden) Support type: height-adjustable feet Number of feet: 6 pcs EQUIPMENT Manhole / dome: on upper head Outlet: available Outlet: 65 mm MATERIAL SPECIFICATION Foot material: stainless steel AGITATOR Agitator manufacturer: Stelzer Agitator positioning: on the tank AGITATOR 2 Agitator positioning: on the tank Speed: 975 rpm Power: 11.0 kW

Condition: used, tank capacity: 1,540 l, GENERAL INFORMATION Equipment: Spray head Design: vertical Remarks: Homogenizer mounted on the bottom (see photos) is included in the scope of delivery Heating/cooling: available Insulation: available Max. permissible operating overpressure: 6.0 bar Max. overpressure: 3.0 bar Agitator: propeller Agitators: 2 agitators Agitator type: anchor agitator Location: external storage Cylinder temperature control: double jacketed Nameplate: Volume: 1,540 liters Double jacket volume: 100.0 liters Product-contact material: V2A 1.4301 (AISI 304) Condition: used Previous application: pharmaceutical TANK Max. permissible operating temperature: 200 °C Lsdpfjycirgsx Adwerg Support style: height-adjustable legs Number of legs: 3 pieces INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel EQUIPMENT Manhole/dome: on the upper head AGITATOR Agitator mounting: on the tank Agitator equipment: Scrapers are mounted on the anchor agitator (see photos) AGITATOR 2 Agitator mounting: on the tank

Condition: used, machine/vehicle number: YV2XT40C7MA87xxxx, mileage: 2,25,000 km, Year of construction: 2021, Please contact ATS Norway for more information Please provide reference number upon request: 22211 Specifications: EU approved until 16.08.2026 2021 model Mileage: approx. 225,000 km Dual clutch Full air suspension Tires (see photos) Norba body 2-compartment Bio compartment Central lubrication VDS Euro 6 Length: 10.23 m Width: 2.55 m Wheelbase: 490/137 cm Curb weight: 18,000 kg 6x2 510 hp Snow chains Rear-view camera Air horns Rotating beacons Tool box Lsdpfxsycb Dho Adwjrg Autoline S90 sand spreader Additional engine heater Globe cab Bunk Refrigerator Radio/CD Climate control / AC Description: 2021 Volvo FM500 refuse collection truck with Globe cab and Norba 2-compartment body.The vehicle is covered by a service agreement that can be continued.Supplied with extra tires and snow chains.EU approved until August 2026 and available for delivery on short notice.See video! Km: 225000 HK: 509 Technical approved: Yes EU-approved until: 16.08.2026 Own weight: 18000 Total Weight: 29500 Payload: 11425 Width: 255 Length: 1023 Euro: 6 Model: 2021 Volvo FM500 6x2 komprimatorbil med Norba 2-kammer påbygg Gearbox: Automatic

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Features and technical specifications: - Bag melter for 2 to 3 kg aluminium bag units - Type of glue pump: gear pump - Pump rated speed: 93 rpm - Basic tank size (reservoir): approx. 2 l/h - Melting capacity: up to 5 l/h - PT-100 temperature sensor for device and external heaters - Control precision: +/- 1° C - Heaters (device): 2 heating zones; basic tank and pre-melting plate, separately adjustable - Connected load: 5 kW Dimensions: 1100 x 500 x 1100 mm Weight: approx. 110 kg Lrjdow Rhlbspfx Adweg Availability: short-term Location: 63934 Röllbach

Condition: new, The Hydraulic Tube Bender 1/2 is a compact and mobile Tube Bending Machine designed for bending steel tubes of larger diameters with a powerful manual hydraulic pump. This machine boasts a capacity of 10 tons and comes complete with dies for commonly used tube dimensions, allowing you to create bends of up to 90 degrees. With its robust 3-leg stand and 6 bending segments, it ensures stability and ease of use during operation. The included attachments cater to various diameters, making this versatile tool ideal for your tube and profile processing needs. You can efficiently bend tubes while enjoying the benefits of its portable design. If you require a reliable Tube Bending Machine, consider the Hydraulic Tube Bender 1/2 from KNUTH to enhance your workshop capabilities. Don't hesitate to request a quote today! Lredpouzlh Ijfx Adwjg

Condition: used, mileage: 4,49,000 km, power: 294 kW (399.73 HP), first registration: 09/2015, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, loading space length: 6,700 mm, loading space width: 2,450 mm, loading space height: 600 mm, Year of construction: 2015, Equipment: ABS, air conditioning, crane, MERCEDES ANTOS 2540 Platform 6,70 m + HIAB 144 BS - 2 HIDUO + REMONTE CONTROL / 6x2 Imported / Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2015 ? MILAGE: 449 000 km EQUIPMENT: ? ABS ? EL. WINDOWS ? AIRCONDITION ? POWER STEERING ? TACHOGRAPH ? RETARDER LOADING SPACE: 670 x 245 x 60 cm CAPACITY: 13 000 kg TOTAL WEIGHT: 26 000kg TIRE SIZE: 315/70R22,5 Lrodpoyc A Nxsfx Adwsg WHEELBASE: 525/135 cm SUSPENSION: FRONT: SPRING BACK: AIR CRANE: HIAB 144 BS - 2 HIDUO + REMOTE CONTROLE TEL: * KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO * SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? * LASZLO - MAGYAR * COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ????? Ref. nr: 2692

Condition: used, Oscillation ja_yes ja / nein 0 ja_yes ja/nein Lredswzmuwjpfx Adweg 0 ja_yes ja/nein tiltable up to ja_yes Motor output 2,2 kW Table dimensions 1000 x 350 mm sanding width 200 mm Weight 300 kg Langzauner LZK 3/2, BB 200 Edge Sander ----- Technical manufacturer's specifications: Table width: 345 mm Table length: 1000 mm Maximum sanding belt width: 200 mm Sanding belt length: 2600 mm Main motor: 3 kW Circular sanding support: Yes Oscillation: Yes Height adjustment: Manual table Swivel sanding belt: Yes Space required length: 1800 mm Space required width: 900 mm ----- Price of the above-mentioned machine upon request! (Technical specifications according to the manufacturer - no guarantee!) All prices quoted are net, plus statutory VAT. No original images available yet; image from a brochure for the same model

Condition: used, machine/vehicle number: WMAT37ZZZ1W04xxxx, mileage: 3,00,000 km, Year of construction: 2000, Please contact ATS Norway for more information Please provide reference number upon request: 22178 Specifications: EU approved until 05.08.2026 2000 model Mileage: approx. 300,000 km Manual transmission Tires (see photos) The body currently mounted has a Carrier refrigeration unit Swap body no. 2 is a Bussbygg box body with refrigeration unit Length: 998 cm Width: 250 cm Wheelbase: 500/135 cm Curb weight: 9,325 kg Power: 409 hp Autoline sand spreader Lrodjyaxi Aspfx Adwsg Tool box Tow bar Rear-view camera Zepro tail lift 2 bunks Radio/CD Climate control / AC Description: 2000 MAN 26.414 chassis sold with two swap bodies.The gearbox has been replaced; the replacement gearbox has approx. 100,000 km of use. On the body currently mounted, three fans need replacement.On the second swap body, the refrigeration unit requires a new electronic control board to operate. The vehicle is EU approved until August 2026 and has been in weekly operation.Available for delivery on short notice. Km: 300000 HK: 409 Technical approved: Yes EU-approved until: 05.08.2026 Own weight: 9325 Total Weight: 26000 Payload: 16600 Width: 250 Length: 998 Euro: 2 Model: 2000 MAN 26.414 Chassis m/ 2 vekselflak. Skiftet girkasse. Gearbox: Manual

Condition: good (used), Year of construction: 1999, load capacity: 1,600 kg, lifting height: 2,900 mm, fuel type: electric, mast type: duplex, empty load weight: 1,300 kg, Obtained as trade-in Electric stacker Brand: BT Year of manufacture: 1999 BLOCK PALLETS: outer fork width 68 cm Capacity: 1,600 kg Lifting height: 2,900 mm Overall height: xxx mm Lrjdpfx Adsyc Eygeweg Battery: maintenance-free GEL includes charger Watch the video on YouTube

Condition: used, Year of construction: 2008, cutting diameter / mm saw band length / mm cutting width / mm including roller conveyor 4000 x 500 x 850 mm Sawing diameter (round): 260 mm Sawing diameter (square): 260 mm Sawing diameter (rectangular): 300 x 260 mm Saw blade dimensions: 4200 x 34 x 1.1 mm High-performance band saw automatic machine, heavy-duty hydraulic production band saw Parallel sawing feed system in profile guide rails Mitsubishi NC program control E1032 for preselection of 90 sets, each with a specific quantity and corresponding cut length PLC control Mitsubishi With Siko incremental encoder Material feed with ball screw spindle 950 mm in one stroke, any desired cut length from 3 mm – 9999 mm Lrodewm Rqtspfx Adwsg Hydraulic material clamping with long-stroke cylinder, opening on both sides Material clamping with double vice in front of and behind the saw blade Remaining piece length in automatic mode: 90 mm Max. cutting length in automatic mode: unlimited Material support height: 850 mm Net weight: 2300 kg Dimensions W x H x D mm: 2580 x 2000 x 2000

Condition: used, STÖCKEL FNX 640 ST-2 is a NC Surface grinder, engineered for precision, high accuracy and reliability. Capacities: grinding length 600 mm, grinding width 400 mm, grinding height over table 530 mm; table speeds up to 35 m/min. Main technical specifications: grinding spindle motor 7.5 kW; voltage 50 Hz 3x 400 V; machine weight approx. 3600 kg; overall dimensions L 3000 × W 2500 × H 2300 mm. Delivers tight tolerances and is suited to applications in automotive, aerospace, machine tools, medical and watchmaking. Ljdpfoychhasx Adworg

Condition: used, Year of construction: 2020, operating hours: 1,950 h, Serial number: HCMAFF5ZE0003xxxx Please contact ATS Norway for more information Please provide reference number upon request: 22181 Specifications: 2020 model Certified until 01/2027 Hours: 1950 Weight: 6160 kg Central lubrication system Maintained under service agreement, 2000-hour service performed privately KM40 quick coupler Rototilt with grab Digging bucket Grading bucket Undercarriage in good condition, see pictures Track width: 40 cm Dozer blade Total width: 200 cm Radio/CD Climate control / AC Delivery by agreement Description: 2020 Hitachi Zaxis ZX65USB with only 1950 operating hours. Lsdpfxoya Ub Ue Adworg The machine is sold with rototilt, grab and two buckets. It is certified and has been well maintained with regular servicing. Delivery by agreement. Hours: 1950 Own weight: 6160 Width: 200 Model: ZX65USB-6 m/ Rototilt m/ grip og 2 skuffer. 1950 timer!

Condition: used, Year of construction: 2000, Overview  This PET blow-moulding machine was manufactured in 2000 by French company SIDEL. The machine is currently in good working condition, running in production until the end of November 2025. It will be dismantled and craned out through the roof, with craning scheduled for December 2025. It becomes available after dismantling. Technical data Capacity: 7,600 bph on 1.0 L Formats: Neck finish 29/21 Preforms processed: RPET Plastipak & Resilux Number of moulds: 6 (moulds not included) Equipment & Features: Quick change for shell molds Sidel caterpillar oven 6 heating modules Sidel preforms tipper Sidel preforms hopper & feeder Sidel preforms infeed rail Sidel caterpillar oven & blowing wheel Solenoid valves Sidel Universal type Sidel PCC version V2.02 Sidel CE electrical cabinet (Siemens) Service history: Sidel maintenance completed September 2024 Elongation sensor retrofitted Additional service by client’s technicians Scope of Delivery  Stretch blow-moulder SIDEL SBO 6 Series 2 Preforms tipper Preforms hopper & feeder Preforms infeed rail Caterpillar oven & blowing wheel Ledpfsyb Tbpjx Adwsrg

Condition: new, Cefla painting system Lsdpjwhbrwefx Adworg

Condition: used, Flexible milling cell with 6-axis industrial robot ABB - CARAT type IRC5 / IRB 2400 M2004 Robotic milling system with rotary shuttle table featuring 2 workstations, robot cell Serial No. 24-51541 Year of manufacture: 2006 6-axis industrial robot ABB Type IRB 2400/16 M2000 Control system: ABB Type IRC5 with tech-in panel HF milling spindle PERSKE Type KRS 35.3-2, power 1.2 kW, rotational speed 17,400 to 23,200 rpm Robot handling capacity: 16 kg Robot net weight: 380 kg Power supply: 400 VAC, 50 Hz - High-frequency spindle equipped with collet chuck - The complete plant is configured as a compact milling cell with shuttle table. - Control cabinet and robot control unit compactly and solidly installed on the milling cell - Servo-driven rotary table, rotation angle 180°, with partition and two clamping surfaces for fixtures - One side of the rotary table can be loaded with new workpieces in parallel to the milling cycle Milling cell weight: approx. 4000 kg Very good condition The milling cell was used as a machining center for milling operations on aluminum sheets and ALU deep-drawn parts. Edge processing, milling of cutouts, drilling, etc. Also suitable for machining plastics or similar materials. Lredpfxsyaq Nuj Adwsg If interested, please request a video from us.

Condition: used, Year of construction: 1985, material width 500 mm coil weight 1,0 t material thickness 0,4 - 5,0 mm coil internal diameter 420 - 520 mm coil external diameter 1200 mm material cross-cut 1500 mm² no. of straightening rolls 9 number of draw-in rolls 2 speed 0 - 80 m/min Weight 1,70 t Dimensions (WxDxH) 2,7 x 1,3 x 1,9 m Weight 1,35 t dimensions 2,2 x 1,2 x 2,0 m Straightening machine with infinitely variable drive, intermediate lifting of the inlet rolls, hydraulic threading wedge Lsdpfxsvut Hzo Adwerg Decoiler with auxiliary drive, hydraulic centralized expansion, snubber roll

Condition: used, Year of construction: 1988, pressure 200 t stroke 30 - 160 mm no. of strokes 40 - 120 /min distance between columns 1500 / 1300 mm dayligth (stroke and adjustment up) 860 mm column travel -side 600 x 530 mm table surface area 1250 x 1250 mm hole in the table 550 x 300 mm table height over floor 1000 mm ram surface 1250 x 1000 mm ram adjustment 125 mm material width 30 - 500 mm material thickness 0,5 - 3,0 mm Lredsvut S Djpfx Adwjg feed length 0 - 999,9 mm power requirement 50,0 kW Weight 34,00 t dimensions of the machine ca. 4,0 x 1,7 x 5,2 mxmxm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch/brake combination (Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, automatic stroke adjustment

Condition: used, Year of construction: 1995, material width 400 mm coil weight 2,0 t coil internal dia. 480 - 520 mm coil outside dia. 1500 mm with hydraulic auxiliary drive with mechanical lag brake, hydraulic centralized expansion, pneumatic snubber roll, coil loop control via contact plate Lodpfovuungsx Adwerg min. material width 20 mm

Condition: used, Year of construction: 1982, pressure 150 t throat 520 mm stroke 30 - 200 mm no. of strokes 15 - 60 /min distance table/ram, max. stroke up, adjustment up 650 mm table surface area 1600 x 1000 mm hole in the table 1040 x 140 mm table height over floor 1000 mm passage to the back 1000 mm ram surface 1400 x 800 mm ram adjustment 120 mm power requirement 20,0 kW weight 27,5 t dimensions (WxDxH) 2,3 x 2,75 x 4,5 m permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch/brake combination (make Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, semi-automatic ram adjustment Lodpfx Adevuudbowsrg can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F

Condition: ready for operation (used), Conveyor belt, conveyor line, conveyor system, Used machine Manufacturer: M Fördersysteme Type: GFV/2 Overall dimensions: Width: 3100 mm Depth: 810 mm Height: 1100 mm Electrical data: 380V Belt size: 2590 × 580 mm Lredpfx Adjx Sd Shswjg Belt speed: 3.5 m/min Year of manufacture: 2005