Used 250 Kva for sale (12,055)

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, turning diameter over cross slide: 170 mm, spindle bore: 75 mm, turning diameter over bed slide: 280 mm, center width: 1,600 mm, spindle speed (max.): 1,320 rpm, TECHNICAL DETAILS Swing diameter over bed: 280 mm Fodpfx Ajy Iwm Rea Nopg Swing diameter over cross slide: 170 mm Centre height: 220 mm Centre distance: 1600 mm Spindle speed range: 25 - 1320 rpm Spindle bore: 75 mm Tailstock quill taper: MT 4 MACHINE DETAILS Machine weight: approx. 2025 kg EQUIPMENT Heidenhain digital readout Multifix tool holder Coolant system Machine lamp

Condition: used, Power supply, converter, converter, power supply unit, Smart-UPS, spare battery, UPS system -Transfer: in the current condition as seen -Error: L3 power level defective Fpedpfx Aajfngw To Neg -Manufacturer: AdPoS, UPS system -Type: UPS Maxi-J FH 40 kVA -Dimensions: 825/440/H1270 mm -Weight: 154 kg

Condition: ready for operation (used), GMN TSE 80 x 250 - 6007 spindle SN: R307943 with Siemens 1LA5073-4AB95-Z motor SN: EJ797957201009, used, in good maintained condition, 100% functional, scope of delivery as per photos. Fpodpfjy Npdwex Aa Nsg

Condition: ready for operation (used), Seidel 66WKS-M310/45-V4 - 66WKS-M310 / 45-V4 servo amplifier 12.1 kVA, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Fpjdsi Ec Sxspfx Aa Nsg

Condition: ready for operation (used), GMN TSE 80 x 250 - 6007 spindle SN: R307942 with Siemens 1LA5073-4AB95-Z motor SN: EJ797957201007, used, in good condition, 100% functional, scope of delivery as per photos. Fedpfey Npdqsx Aa Nepg

Condition: new, Brinkmann STC 250 / 720 MVXZ + 459 submersible pump 250 L / min No. 001, serial number as per photo, unused, 100% functional, scope of delivery as per photo ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Fodpfxei D Hkbe Aa Nepg

Condition: ready for operation (used), Seidel 65WKS-M310/22-V3 - 65WKS-M310 / 22-V3 servo amplifier 5.9 kVA, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Fsdpfxsi Ec N Se Aa Njpg

Condition: ready for operation (used), Heidenhain ROD 250 18000 . 21311601 Serial number: 3654376C / L3, fully refurbished with 6 months warranty, 100% functional, delivery as per photos. Fjdpfx Ajy Nqn Dja Nspg

Condition: ready for operation (used), Seidel 65WKS-M310/22-V3 - 65WKS-M310 / 22-V3 servo amplifier 5.9 kVA, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Fpjdsi Ec Rljpfx Aa Neg

Condition: ready for operation (used), Seidel 66WKS-M310/45-V4 - 66WKS-M310 / 45-V4 servo amplifier 12.1 kVA, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Fpodpfx Aji Ec S Aoa Neg

Condition: ready for operation (used), Heidenhain TE 400 control panel ID: 250 517 SN: 4648841, used, in good condition, 100% functional, delivery as shown in the photos. Fjdpfx Aaey Nqtye Nopg

Condition: ready for operation (used), Seidel 66WKS-M310/45-V4 - 66WKS-M310 / 45-V4 servo amplifier 12.1 kVA, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Fsdpfx Aoi Ec Suoa Nepg

Condition: new, Bühler FC-T G 1/2-75-DC-01/250 fluid control terminal with integrated level and temperature monitoring, unused, 100% functional, scope of delivery as per photos Fpedpfx Aasi D Ulye Nsg

Condition: used, Year of construction: 2009, Extraction diameter: 250 mm Rated volumetric flow: 3534 m³/h Filter area: 22.6 m² Motor: 5.5 kW Briquetting: throughput approx.: 30 kg/h Briquette diameter: 65 mm Motor: 3.0 kW Storage location: Nattheim Fpjdeyym A Sepfx Aa Nog

Condition: good (used), Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping plate with T-slot, clamping table, T-slot table, milling machine table, tilting table -Clamping table: Milling machine table, tilting table, T-slot table -Table surface: 250 x 250 mm, swivels on both sides -T slots: Slot width: 14 / 25 mm, Slot depth: 24 mm -Dimensions: see photos Fpjdpfey Iwkcsx Aa Nog -Transport dimensions: 300/250/H155 mm -Weight: 26.4 kg

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Equipment: documentation/manual, Straight driven tools – 2 pcs Fodpfx Aaey I I Nce Nopg Angle, 90°, driven tools – 3 pcs + all tool holders visible in the photo.

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 310 mm, spindle bore: 80 mm, turning diameter over bed slide: 500 mm, center height: 250 mm, center width: 1,000 mm, quill diameter: 75 mm, rotational speed (max.): 1,600 rpm, rotational speed (min.): 9 rpm, quill mount: MK 5, Equipment: rotational speed infinitely variable, incl. RÖHM lathe chuck incl. 3-axis position display incl. quick-change tool holder 'Set', Multifix system for further information, see data sheet ELMAG warranty: 3 years (with online registration after purchase) NOT THE RIGHT MACHINE? Fsdjy Izauspfx Aa Nspg We are official ELMAG partners and can offer you the entire range of ELMAG products! Request a quote!

Condition: new, Year of construction: 2026, machine/vehicle number: PB-70/250-1000NC-2C, functionality: fully functional, power: 20 kW (27.19 HP), input frequency: 50 Hz, type of input current: three-phase, total length: 30,000 mm, total width: 5,000 mm, total height: 3,000 mm, overall weight: 10,500 kg, Equipment: CE marking, documentation/manual, Our welding and spacer bending line is a fully automatic system with PC control, designed for fast and precise production of reinforcement elements. It is equipped with 4 × 45 kVA transformers, 20 kW electric motors, and a 3 × 400 VAC, 50 Hz power supply. The machine processes longitudinal wire with a diameter of 3.5–5 mm and diagonal wire of 3.5–4 mm. It supports a 150 mm step, adjustable heights from 70 to 250 mm, spacer length of 2400 mm before bending and 2050 mm after bending, as well as simultaneous transformer activation to optimize the welding process. With a welding speed of 30 m/min, a weight of 10.5 t, and dimensions of 30 × 5 × 1.5/3 m, it enables efficient and reliable serial production. Fjdpfoy Iyygjx Aa Nopg

Condition: as good as new (ex-display), Clean Air Filter Type: Power Unit 250 P FU Offer type: Demonstration machine Technical data: Motor power: 7.5 kW / 3-phase / 400 V / 50 Hz Inlet diameter: 250 mm Rated air flow: 3,534 m3/h Max. air flow: 4,900 m3/h Negative pressure at rated flow: 3,184 Pa Filter surface area: 22.4 m2 Compressed air cleaning including integrated pre-separator including integrated automatic extinguishing system Fpodpfehfmpxex Aa Nsg including inverter for speed control including integrated acoustic enclosure (-4 dB(A)) Chip collection volume: 2 x 250 L Sound pressure level: 71 dB(A) incl. dust lock Dimensions (L x W x H): 3,000 x 1,058 x 2,361 mm Weight: 850 kg

Condition: used, The machine is suitable for the agglomeration of thermoplastic films and fibres. The throughput can be estimated to be 500 kg - 1000 kg/h, depending on the material, its condition and humidity. The system consists of: • conveyor belt • load-dependent control for the belt conveyor. • metal detector • HERBOLD granulator type SMS 45/100-H5-3 • pneumatic material transport to the storage silo • plastcompactor unit HV-70 (consisting of a storage silo feeding screw, plastcompactor, central blower, cooling circuit) • HERBOLD secondary granulator type SML 45/100-S4-2 • intensive cooling Fpjdpfx Aasy Iczts Nsg • SZS II 630/200 conveying fan • screening machine, undersize grain will be returned into the compactor silo. • material conveyor type MFT with big bag station and automatic switchover to the on-site silo • automatic exhaust air filter • electrical control unit • compressor.

Condition: used, The machine is suitable for the agglomeration of thermoplastic films and fibres. The throughput can be estimated to be 500 kg - 1000 kg/h, depending on the material, its condition and humidity. The system consists of: • conveyor belt • load-dependent control for the belt conveyor. • metal detector • HERBOLD granulator type SMS 45/100-H5-3 • pneumatic material transport to the storage silo • plastcompactor unit HV-70 (consisting of a storage silo feeding screw, plastcompactor, central blower, cooling circuit) • HERBOLD secondary granulator type SML 45/100-S4-2 • intensive cooling • SZS II 630/200 conveying fan • screening machine, undersize grain will be returned into the compactor silo. • material conveyor type MFT with big bag station and automatic switchover to the on-site silo Fpjdoy Ia Ttopfx Aa Nsg • automatic exhaust air filter • electrical control unit • compressor.

Condition: excellent (used), Year of construction: 2008, Nakamura Super Mill WY-250 CNC Lathe Capacity: Max. turning diameter: 215 mm Standard turning diameter: 150 mm Distance between centers: max. 870 mm / min. 250 mm Max. turning length: 580 mm Bar capacity left/right: L: 65 mm R: 51 mm Chuck size: left: 210 mm (8″) right: 165 mm (6″) Axis travel: Slide travel (X1 / X2): 160.5 mm / 160 mm Slide travel (Z1 / Z2): 580 / 580 mm Slide travel (Y1 / Y2): ±50 mm / -50 mm, +20 mm Slide travel (B2 axis): 620 mm Rapid traverse X1 / X2: 18 m/min Rapid traverse Z1 / Z2: 36 m/min Rapid traverse B2 axis: 36 m/min Rapid traverse Y1 / Y2: 10 m/min Main and sub spindle: Spindle speed: 4500 rpm / 5000 rpm Speed range: stepless / stepless Spindle nose: A2-6 / A2-5 Spindle bore: 80 mm / 63 mm Front bearing inner diameter: 110 mm / 90 mm Drawtube diameter: 66 mm / 52 mm C-axes: Minimum input unit: 0.001° Minimum command increment: 0.001° Max. indexing speed: 600 rpm Feed speed: 1–4800 mm/min C-axis lock: disc brake C-axis positioning time: 1.5 s Upper/lower turret: Turret type: 12-position drum turret Number of tool stations: 48 (2 x 24) Fodey Ipp Ropfx Aa Njpg Square tool size: 25 mm Round shank tool size: 32 mm Driven tools: Drive system: single drive Spindle speed: 6000 rpm / 3600 rpm Speed range: stepless Number of driven tool stations: 12 × 2 Collet size: ER32 Straight toolholder size: 2 mm – 20 mm Cross toolholder size: 2 mm – 20 mm Drive power and torque: Left spindle: 18.5 / 11 kW 225 / 185 Nm Right spindle: 15 / 11 kW 120 / 120 Nm Tool spindles: 7.5 / 3.7 kW 40 / 16 Nm General: Machine height: 2395 mm (without extraction) Footprint: 4436 mm × 2674 mm / 4905 mm × 3331 mm Machine weight: 14,000 kg Scope of supply as shown in photo gallery includes, among others: Nakamura lathe, toolholders (driven and non-driven), collets, complete operating documentation, portal loader and loading robot, Iemca Master 880 Verso bar feeder, peripheral devices (chip conveyor, transformer, oil mist separator, etc.) No guarantee is given for the correctness, completeness or currentness of the information provided.

Condition: good (used), Year of construction: 2002, Behringer Eisele VA-0-250-NC Circular saw Fedpfxjvdk A Ee Aa Nspg TECHNICAL DATA Sawing range: 90 ° Saw blade diameter: 25 cm Bore: 40 mm Cutting range: 10-75 mm Cutting length: 5-900 mm Speed: 2800 rpm Cutting speeds: 26/52/103/206 SFPM or 0.13/0.26/0.52/1.05 m/s Feed speeds: 0-40 mm/sec NC axis: Yes Dimensions: 190 x 127 x 190 Weight: 1300 kg We assume no liability for the accuracy, completeness and up-to-dateness of the information provided

Condition: new, Year of construction: 2026, functionality: fully functional, Pressure 250 t Bending length 3100 mm Frame gap 2600 mm Control Cybelec VisiTouch 24 Stroke 300 mm Throat depth 500 mm Installation height 500 mm Rapid approach (down) 175 mm/s Fpsdpfoylwm Rex Aa Neg Bending speed 0-12 mm/s Total power requirement 22 kW Machine weight approx. 13,000 kg Dimensions 3900 x 2150 x 3360 mm Standard equipment: Basic features: - CNC control Cybelec Visitouch 24 - 6+1 axes: Y1-Y2-X-R-Z1-Z2 +V - Automated dynamic hydraulic crowning system: G-CS - Frame deflection compensation system – G-REFLEX - Backgauge system model GHP-4 - Servo-driven main motor - LED display on the ram for visualizing the backgauge positioning - Safety system: DSP AP+MCS - HAWE hydraulic system - CE standard compliance - Upper and lower tool clamping with PROMECAM mechanical system

Condition: used, Year of construction: 2002, Pressure 250 t Fpedpfx Aown Ebioa Nsg Bending length 3550 mm Frame width 3000 mm Control Cybelec DNC 1200 Machine weight approx. 18,500 kg Space requirement approx. 4300x2750x3750 mm Accessories: - 2-hand foot switch - Lasersafe Fisseler - Hydraulic tool clamping top and bottom - Die shifting - Hydraulic crowning - Support arms - Control Cybelec DNC 1200 - 1 set of upper and lower tools - Controlled axes y1, y2, x, r, z1, z2, back gauge tilt - Safety guard