Used 250 Kva for sale (11,780)

Condition: excellent (used), Memmert Type: UFP 800 Basic Equipment of the Device Rjdpfeymnv Esx Ag Nep - Electronic, fuzzy-supported PID process controller with continuous power adjustment and a time-saving self-diagnosis system for rapid fault detection (see chapter "Error Messages") - Language selection - Alphanumeric text display - Internal protocol memory with 1024 kB for storing actual temperature, setpoint temperature, air turbine, air flap, and error states with a timestamp - Device control and logging of actual values on MEMoryCard XL - Program sequence control for up to 40 ramp segments - Adjustable air turbine for forced-air cabinets (settings in 10% increments) - Servo-motor controlled air flap (settings in 10% increments) for recirculating or fresh air operation - Integrated weekly timer with group function (e.g., all working days) - Retractable push/turn knob for easy operation of the device - Visual alarm indicator - Built-in buzzer as an alarm for setpoint exceedance, as an acoustic signal at program end, and for input confirmation (key click) - Digital monitoring controller for overtemperature, undertemperature, and automatic setpoint-tracking monitoring (ASF) - Mechanical temperature limiter (TB, protection class 1) - Monitoring relay for heater shutdown in the event of a fault - Two separate PT100 temperature sensors, DIN Class A, 4-wire for control and monitoring - Convenient integrated 3-point temperature calibration - Temperature-dependent interior and door ventilation - Parallel printer interface (PCL3 compatible) - Serial RS-232C interface for computer-aided temperature programs and for reading the internal controller log Technical Data: - Chamber: made from stainless steel, highly stable and easy to clean due to deep-drawn profiled structure. - Housing (outer shell): textured stainless steel, rear panel galvanized steel sheet - UFP 800 mobile and lockable on wheels. - External dimensions: Width 1190 mm, Depth 750 mm, Height 1620 mm - Internal dimensions: Width 1040 mm, Depth 600 mm, Height 1200 mm - Volume: approx. 749 liters - Weight: approx. 170 kg - Power supply: 3N〜 400 V 50/60 Hz - Power consumption: approx. 4800 W 7A Condition: used Scope of delivery: (see picture) (Specifications and technical data subject to change and errors reserved!) We are happy to answer any further questions by phone.

Condition: excellent (used), Memmert Type: UFP 800 Basic Equipment of the Device Rjdpfxoymm Ers Ag Nep - Electronic, fuzzy-supported PID process controller with continuous power adjustment and a time-saving self-diagnosis system for rapid fault detection (see chapter "Error Messages") - Language selection - Alphanumeric text display - Internal protocol memory with 1024 kB for storing actual temperature, setpoint temperature, air turbine, air flap, and error states with a timestamp - Device control and logging of actual values on MEMoryCard XL - Program sequence control for up to 40 ramp segments - Adjustable air turbine for forced-air cabinets (settings in 10% increments) - Servo-motor controlled air flap (settings in 10% increments) for recirculating or fresh air operation - Integrated weekly timer with group function (e.g., all working days) - Retractable push/turn knob for easy operation of the device - Visual alarm indicator - Built-in buzzer as an alarm for setpoint exceedance, as an acoustic signal at program end, and for input confirmation (key click) - Digital monitoring controller for overtemperature, undertemperature, and automatic setpoint-tracking monitoring (ASF) - Mechanical temperature limiter (TB, protection class 1) - Monitoring relay for heater shutdown in the event of a fault - Two separate PT100 temperature sensors, DIN Class A, 4-wire for control and monitoring - Convenient integrated 3-point temperature calibration - Temperature-dependent interior and door ventilation - Parallel printer interface (PCL3 compatible) - Serial RS-232C interface for computer-aided temperature programs and for reading the internal controller log Technical Data: - Chamber: made from stainless steel, highly stable and easy to clean due to deep-drawn profiled structure. - Housing (outer shell): textured stainless steel, rear panel galvanized steel sheet - UFP 800 mobile and lockable on wheels. - External dimensions: Width 1190 mm, Depth 750 mm, Height 1620 mm - Internal dimensions: Width 1040 mm, Depth 600 mm, Height 1200 mm - Volume: approx. 749 liters - Weight: approx. 170 kg - Power supply: 3N〜 400 V 50/60 Hz - Power consumption: approx. 4800 W 7A Condition: used Scope of delivery: (see picture) (Specifications and technical data subject to change and errors reserved!) We are happy to answer any further questions by phone.

Condition: new, Year of construction: 2026, functionality: fully functional, Pressure 250 t Bending length 3100 mm Frame gap 2600 mm Control Cybelec VisiTouch 24 Stroke 300 mm Throat depth 500 mm Installation height 500 mm Rapid approach (down) 175 mm/s Bending speed 0-12 mm/s Total power requirement 22 kW Machine weight approx. 13,000 kg Dimensions 3900 x 2150 x 3360 mm Standard equipment: Basic features: - CNC control Cybelec Visitouch 24 - 6+1 axes: Y1-Y2-X-R-Z1-Z2 +V - Automated dynamic hydraulic crowning system: G-CS - Frame deflection compensation system – G-REFLEX - Backgauge system model GHP-4 - Servo-driven main motor - LED display on the ram for visualizing the backgauge positioning - Safety system: DSP AP+MCS Rjdpfxoylwm Rj Ag Nsp - HAWE hydraulic system - CE standard compliance - Upper and lower tool clamping with PROMECAM mechanical system

Condition: new, Year of construction: 2025, capacity Ø 140 - 250 mm sawing motor 30 kW hydraulic motor 5,5 kW Saw Feeding Servo 3 KW Siemens Material Feeding Motor 3 KW Siemens Saw speed 30-80 rpm /min saw-blade dia. Ø750 x 3,8 x 3,2 x 80 mm cutting range min. 1000 mm cutting range max. 7000 mm control Siemens Redpfxsymf Swe Ag Nep hydraulic Rexroth Valve coolant Pulverisiertes Schneidöl required space 3500 x 8000 mm Saw speed 30-80 rpm / U pro min weight of the machine ca. 9000 kg GERD WOLFF GLS-250 High-performance circular Saw From 10 to 250 Millimeters round material, within seconds, they cut steal ofall kinds with precision an ease. Equipped with a material feed system and components from Germany, we combine german with turkish mechanical engineering.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3076x1250x1600 mm Weight 2000 kg Redpfx Ageyk Ic To Nsp Total power requirement 25,32 kw

Condition: used, Year of construction: 1988, pressure 400 t distance between columns 1100 mm stroke 250 mm no. of strokes 25 - 75 /min distance table/ram, max. stroke up, adjustment up 900 mm Rsdpfx Asvuukneg Nsp table surface area 1100 x 965 mm capacity of ejector in table 30 t ejector stroke of ejector in table 80 mm capacity of ejector in ram 3 t stroke of ejector in ram 60 / 70 mm ram surface 980 x 800 mm column travel -side 800 mm ram adjustment 20 mm power capacity 80,0 + 5,5 kW weight 47,0 t Dimensions (WxDxH) 3,5 x 3,3 x 6,0 m weight of switch cabinet 1,4 t dimensions of electrical cabinet (WxDxH) 4,9 x 0,5 x 2,6 m Multi-station cold extrusion press with link drive with infinitely variable drive, hydraulic clutch-brake combination (Ortlinghaus), hydraulic overload protection in the slide, motorised slide adjustment, pneumatic counterbalance cylinder in press frame, cam-controlled ejector in table (30 t / 80 mm), pneumatic ejector in slide (3 t, 60 mm), motorised central lubrication can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F

Condition: used, Year of construction: 1971, Pressure 063 t throat 250 mm Rjdpfx Ageylzxds Nsp stroke 16 - 90 mm no. of strokes 60 /min distance table/ram, max. stroke up, adjustment up 350 mm table surface area 730 x 500 mm hole in the table 180 x 180 mm table height over floor 710 mm ram surface 350 x 220 mm ram adjustment 50 mm dimensions (WxDxH) 1,3 x 2,2 x 2,4 m SPECIAL DEAL as is where is WITHOUT putting into operation / WITHOUT additional work free loaded to truck

Condition: used, Year of construction: 1977, pressure 250 t stroke 40 - 190 mm no. of strokes 40 /min throat 500 mm passage to the back 1050 mm dayligth 615 mm table surface area 1380 x 880 mm hole in the table 450 mm table height over floor 800 mm ram surface 1200 x 800 mm Rodpfxevuuaie Ag Nep ram adjustment 125 mm power requirement 22,0 kW Weight 24,0 t dimensions of the machine ca. 2,0 x 2,5 x 3,95 m x m x m permitted for manual loading according to the German Safety Regulations (UVV) with motor, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, manual stroke adjustment, motoric centralized lubrication, bolster plate, two-hand operation

Condition: used, Brush deburring machine, tube deburring machine ERINI type 250 Year of construction approx. 1995 Brush diameter 250 mm Brush width 25 - 60 mm Speed 1500 / 3000 rpm Rsdpjpu R Ngsfx Ag Nsp Power 2,2 / 2,8 kW Mains connection 380 Volt, 50 Hz - Material support - New deburring brush - Suction connection Ø 100 mm Space requirement L x W x H 620 x 500 x 1150 mm Weight 100 kg good condition

Condition: used, Piston Compressor KAESER Type EPC 630-250 Serial No.: 1802334 Year of manufacture: 1992 Free air delivery at 6 bar: 440 liters/min. Maximum intake capacity: 630 liters/min. Output pressure: 10 bar Tank capacity: 250 liters Motor power: 3 kW Connection: 400 Volt, 50 Hz (with 16 Amp plug) Rsdpewypqrofx Ag Nop - 2-cylinder, oil-lubricated - Pressure switch set to 10 bar - Run time from 0 bar to switch-off pressure of 10 bar = 5 min Space required (L x W x H): 750 x 700 x 1750 mm Weight: approx. 150 kg In good condition

Condition: used, E-welding machine, stick electrode welding machine ESAB Type LTG 250 Machine no.: 736-820-387 Year of manufacture: 1997 Output: 250 A = 35% duty cycle 190 A = 60% duty cycle 150 A = 100% duty cycle Power setting: stepless - Electrode holder with 6 m connection cable - Direct current (DC) - Fan-cooled - TIG welding may also be possible, but without torch package Power supply: 380 V, 50 Hz, 32 A plug Dimensions (L x W x H): 1200 x 750 x 1050 mm Weight: 180 kg Good condition The unit was originally designed for TIG welding as well. The torch package for TIG welding is not included and its function has not been tested. Rsdpfx Aod N E Rvjg Nsp The water cooling was intended for the TIG torch package. Therefore, the unit is being sold only as an electrode welding machine. Test welds with stick electrodes show excellent welding results.

Condition: used, Year of construction: 2015, Technical details: Rsdpfx Agol Ha Ube Nep weight of the machine ca.: 4 t

Condition: used, Year of construction: 1984, material width 250 mm material thickness 0,25 - 3,0 mm no. of straightening rolls 11 straightening roll diameter 30 mm speed 6 - 60 m/min power requirement 15,0 kW Rodpjylcmpsfx Ag Nop weight 1,1 t dimensions (WxDxH) 1,1 x 1,7 x 1,5 m SPECIAL DEAL as is where is, as spare part dispenser WITHOUT putting into operation / WITHOUT additional work free loaded to truck

Condition: used, Year of construction: 1984, material width 250 mm material thickness 0,2 - 2,0 mm no. of straightening rolls 7 straightening roll diameter 60 mm run-in height 1250 mm speed 5 - 30 m/min power requirement 2,2 + 1,3 kW Weight 0,65 t dimensions (WxDxH) 1,05 x 1,25 x 1,5 m SPECIAL DEAL as is where is WITHOUT putting into operation / WITHOUT additional work Rodjvuk Sbspfx Ag Njp free loaded to truck

Condition: excellent (used), CATALOG NUMBER 7751 TECHNICAL DATA - Track width: 250mm - Working width of roller: 250mm - Max blade diameter: 300mm - Blade bore diameter: 60mm - Max cutting height: 100mm - Table width with extension: 520mm - Table length: 1580mm Rsdpjyh H Hvsfx Ag Njp *from above: - pawls: 2 rows - metal pressure slip roller - shaft with saw blades - smooth metal slip roller *from below: - slip roller - guide rail - pawls - track - central track lubrication - stepless feed speed adjustment - feed motor: 0.75kW - main motor: 15kW - extraction port diameter: 200mm - overall dimensions L/W/H: 1640x1400x1550mm - weight: 1000kg ADVANTAGES – Italian manufacture – in very good condition – used multi-blade saw Net price: 32,900 PLN Net price: 7,830 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (if there are significant exchange rate fluctuations, the price may change)

Condition: used, machine/vehicle number: 008368, Max. panel width: 3800 mm Max. panel length: 3800 mm Main saw blade projection: 75 mm No of Grippers: 6 Rjdjykivnjpfx Ag Nop

Condition: used, Year of construction: 2024, load capacity: 25,000 kg, lifting height: 3,100 mm, total length: 8,880 mm, · Lastschwerpunktabstand: 1200 mm · Lastabstand, Mitte Antriebsachse zu Gabel: 1070 mm · Achsabstand: 4250 mm · Achslast, Last vorn: 15500 kg · Achslast, Last hinten 53800 kg · Achslast, vorn ohne Last 17400 kg · Achslast, hinten ohne Last 4100 kg · Spurweite, vorn / hinten 2200/2140 mm · Reifendruck 1,0 MPa · Mastneigung, α = vorwärts / β = rückwärts: 5/10° · Sitzhöhe 2150 mm · Höhe beim Neigen der EGO-Kabine / OHG 3800 mm · Breite beim Neigen der EGO-Kabine / OHG 3700 mm · Breite über Gabelarme, min. / max. 2700/800 mm · Seitenverschiebung ± bei Breite über Gabeln 557/1585 mm · Min. Arbeitsgangbreite für 90° Stapelung 9550 mm · Wenderadius 5875 mm · Wendekreis innen 550 mm · Betriebsdruck für Hydraulik 22,0 MPa · Hydrauliköltank, Volumen 330l · Kraftstofftank, Füllmenge 375l · AdBlue-Tank, Füllmenge 35l · Kraftstoffsorte des Motors Diesel, 4-Takt · Leistung ISO 3046 / bei Drehzahl 185/220 kW / rpm · Drehmoment ISO 3046 / bei Drehzahl 1160/1200 Nm / rpm Redpfx Asyk Ig Sog Nep · Anzahl Zylinder / Zylinderhubraum 6 / 7700 cm³ · Kraftstoffverbrauch, normale Fahrweise 8-11 l/h · AdBlue-Verbrauch, normale Fahrweise 3-5 % of diesel · Getriebe Typenbezeichnung des Herstellers: Dana TE17000 · Kupplung, Typ Drehmomentwandler · Getriebe, Typ Hydrodynamisches Lastschaltgetriebe · Anzahl der Gänge, vorwärts / rückwärts 3/3 · Generator, Typ / Leistung AC/3080 W · Startbatterie, Spannung / Kapazität 2x12 / 145 V/Ah · Antriebsachse, Hersteller / Typ Kessler D91 / Differential und Nabenvorgelege · Hubgeschwindigkeit Ohne Last (m/s) 0,3 · Hubgeschwindigkeit Bei Nennlast (m/s) 0,32 · Senkgeschwindigkeit Ohne Last (m/s) 0,38 · Senkgeschwindigkeit Bei Nennlast (m/s) 0,38 · Fahrgeschwindigkeit, V/R Ohne Last (km/h) 24/24 · Fahrgeschwindigkeit Bei Nennlast (km/h) 23/23 · Steigfähigkeit, max. Ohne Last (%) 60 · Steigfähigkeit, Mit Nennlast (%) 29 · Steigfähigkeit bei 2 km/h Ohne Last (%) 41 · Steigfähigkeit bei 2 km/h Mit Nennlast (%) 22 · Zugkraft Max. (kN) 173 · Geräuschpegel, innen LpAZ*, EGO-Kabine (dB(A)) 72 · Geräuschpegel, außen LWA (dB(A)) 109

Condition: good (used), Year of construction: 1981, Centre height 130 mm Swing diameter over bed 260 mm Swing diameter over cross slide 140 mm Distance between centres 600 mm Spindle bore 30 mm Bed width 255 mm Spindle mount DIN 55027 size 5 Speed range 35.5 - 3150 rpm Longitudinal feed range 0.04 – 0.4 mm/rev Cross feed range 0.02 – 0.2 mm/rev Metric threads 0.2 – 18 mm Imperial threads 2 – 76 tpi Module threads 0.4 – 13.5 module Diametral pitch threads 2.6 - 36 DP Tailstock quill taper MK 4 Drive power 3 kW Dimensions L x W x H 2140 x 850 x 1400 mm Weight 1,100 kg Accessories / Special Features: • 3-jaw wedge bar chuck FORKARDT F 160 with jaw safety, Ø 160 mm • Rapid tool change system “Multifix” size B • Coolant system with chip backsplash • Chuck guard • Hardened bedways • Machine lighting • Bed stop • Emergency stop switch Redpfx Ajxz Rfkeg Njp New brake discs, new drive clutch, new V-belts, and new gearbox and V-belt bearings in 2026, cost €3,950.00 net. Option: New 3-axis digital readout K+C, fully installed €1,995.00 net Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Year of construction: 2001, operating hours: 78,000 h, functionality: fully functional, clamping force: 250 kN, screw diameter: 18 mm, For sale is an injection molding machine of the brand Arburg and the type 270S 250-60 The machine is fully functional and ready for immediate use Technical data Year of construction: 2001 Operating hours: 78,000 h Redju Hqhqspfx Ag Nsp Screw Ø: 18 mm Clamping force: 250 kN Valve gate: Pneumatic Core pull: 1*Hydraulic Internal pressure transducer On request, transportation and loading can be organized for an extra charge. can be organized throughout Europe. Prices plus VAT Viewing possible by appointment. Please contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: new, AL-KO POWER UNIT 250 P - Exhibition unit - Integrated pre-separator, integrated automatic extinguishing system ----- Technical Data ----- Extraction nozzle Ø: 250 mm, nominal airflow: 3,534 m³/h, max. airflow: 4,900 m³/h, max. negative pressure: 3,184 Pa, filter area: 22.4 m², chip collection volume: 2 x 250 liters, number of bags: 2 pieces, motor 400 V: 7.5 kW, dimensions (LxWxH): 2,351 x 1,058 x 2,361 mm, sound pressure level: 71 dB(A), weight: 758 kg, according to: GS - HO - new exhibition machine - Rodpfowu Hatjx Ag Njp

Condition: used, mileage: 5,59,196 km, power: 180 kW (244.73 HP), first registration: 01/2015, fuel type: diesel, empty load weight: 7,000 kg, maximum load weight: 8,925 kg, overall weight: 16,000 kg, tire size: 285/70 R19,5, axle configuration: 2 axles, wheelbase: 4,800 mm, next inspection (TÜV): 01/2026, brakes: engine braking, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: steel-air, number of seats: 2, total length: 2,550 mm, total width: 3,750 mm, total height: 9,350 mm, loading space length: 7,400 mm, loading space width: 2,500 mm, loading space height: 2,600 mm, Equipment: ABS, air conditioning, central locking, compressed air brake, cruise control, differential lock, onboard computer, DAF LF 250 flatbed with curtain side | Euro6, manual transmission | Tail lift 1500 kg | Cargo area dimensions: L:7.40m W:2.50m H:2.60m | Air conditioning, electric windows, electric mirrors | Toolbox | Subject to errors, input mistakes, and prior sale. Rodpeyilmksfx Ag Nep

Condition: used, mileage: 1,17,100 km, power: 140 kW (190.35 HP), fuel type: diesel, gearing type: automatic, overall weight: 3,100 kg, first registration: 10/2019, emission class: euro6, energy efficiency: B, color: grey, suspension: steel, number of seats: 7, fuel: diesel, Equipment: ABS, air conditioning, airbag, all wheel drive, central locking, cruise control, immobilizer system, navigation system, onboard computer, parking heater, parking sensors, power assisted steering, seat heater, sliding door, soot filter, E07 Hill Start Assist, LP3 Interior Lighting Package, EJ9 COMAND Online, Q50 Trailer Hitch with Removable Ball Head, JA7 Blind Spot Assist, FB4 AMG Spoiler Lip on Tailgate, EY5 Mercedes-Benz Emergency Call System, BS1 Brake Calipers with Mercedes-Benz Lettering, EY6 Breakdown Management, EY8 Pre-Installation for Vehicle Monitoring, G43 9G-TRONIC Automatic Transmission, CM2 Bumpers and Attached Parts Painted in Vehicle Color, FS5 Illuminated Vanity Mirrors, FC1 Electronic Key in Chrome Finish, JK5 Instrument Cluster with Color Display, LG2 LED Intelligent Light System, R1U AMG Alloy Wheels 8 J x 19 Black, LG4 LED Tail-, Brake-, and Indicator Lights, RK1 Tires 245/45 R19, LG8 High Beam Assist PLUS, EZ5 Parking Package, XO7 Mercedes-Benz Mobilo with DSB and GgD, SE5 Lumbar Support Driver's Seat, EZ7 Active Park Assist, SE4 Lumbar Support Passenger Seat, CN1 Exterior Sill Panels, T70 Child Safety Locks on Rear Passenger Doors, ZC6 Sales Identifier 1, T74 Entry Grab Handle, UR1 Seat Rail System with Quick-Release Lock, V33 Carpeting in Rear Compartment, HH9 Semi-automatic Controlled Air Conditioning TEMPMATIC, V36 Roof Lining, E1D Digital Radio (DAB), Y10 First Aid Kit, MJ8 ECO Start-Stop Function, IB6 Model Series C447 Vito/V-Class, ES3 12V Outlets for Rear Seat Rows Right & Left, ES2 12V Outlet in Boot / Luggage Compartment, VD7 Black Interior Roof, H00 Warm Air Duct to Passenger Compartment, MS1 Cruise Control, IK3 Luxury Van, HI1 Climate Zone 1 (Cold/Comfort), US3 3-Seater Comfort Bench 2nd Rear Row, W64 Separately Opening Rear Window, V44 Carpeting in Front Cabin, RM4 Comfort Tires, US7 Single Seat 1st Row Right, W68 EASY-PACK Tailgate, US6 Single Seat 1st Row Left, Z42 Registered as. We are available by phone Monday to Friday until 8:00 PM and Saturday until 4:00 PM!! More information:!! Leasing/financing and trade-in possible!! Rjdpfx Ageynzvhe Nsp !! -Subject to errors and prior sale!! -All details without guarantee ... more on our homepage

Condition: used, operating hours: 18,001 h, travel distance X-axis: 2,500 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 820 mm, nominal power (apparent): 82 kVA, controller manufacturer: Heidenhain iTNC 530, workpiece length (max.): 900 mm, workpiece width (max.): 900 mm, total height: 3,267 mm, total length: 4,523 mm, total width: 8,436 mm, rotational speed (min.): 12,000 rpm, spindle speed (min.): 12,000 rpm, number of slots in tool magazine: 80, Year of construction: 2004 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 2500 Y-axis travel mm: 920 Z-axis travel mm: 820 Worktable Number of pallets: 1 Table dimensions mm: 3100 Maximum workpiece size (D x H) mm: 900 Spindle Spindle speed rpm: 12000 Spindle drive power kW: 35/25 (40/100%ED) Cooling Tank capacity: 600 Tool system Tool holder: HSK-A 100 Tool magazine slots: 80 Tool changer: Pick-up With free neighboring places mm: 160 With occupied neighboring places mm: 100 Max. Tool Length mm: 250 Max tool weight kg: 12 Equipment Chip conveyor Rjdpfx Asylw D Ajg Nep Rotating inspection windows Signal lamp Workarea light Air or water through spindle center RENISHAW Measuring probe Machine running times Under power: 61685 Spindle Working: 18001 Rated power kVA: 82 Basic machine dimensions / weight Length mm: 4523 Width mm: 8436 Height mm: 3267 Weight kg: 26000

Condition: new, Year of construction: 2025, operating hours: 11 h, functionality: fully functional, overall weight: 1,500 kg, fuel type: diesel, tank capacity: 200 l, nominal power (apparent): 100 kVA, rotational speed (max.): 1,500 rpm, Power Generator 80 kW / 100 kVA – NEW – AVR – ATS Ready – 400V Condition: Brand new, unused Availability: In stock Technical Specifications: Continuous power output: 80 kW / 100 kVA Voltage: 400V / 50 Hz Voltage regulation system: AVR (Automatic Voltage Regulator) Prepared for ATS (Automatic Transfer Switch) connection Suitable for emergency backup power or continuous operation Additional Options: Automatic transfer switch (ATS) – Generator / Mains: available for an extra €800 Rjdpfjxuvc Usx Ag Nep Commercial Information: Price includes a fully assembled, ready-to-run generator Transport, installation and commissioning available on request

Condition: good (used), Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor Rsdoyk T Dcspfx Ag Njp -Manufacturer: Feldpausch, conveyor belt, transport belt, belt conveyor, height-adjustable -Speed: 15 m/min -Belt width: 250 mm -Conveyor length: 2060 mm -Height: max. 920 mm -Drive: Engel 0.06 kW, see photo of nameplate -Transport dimensions: 2060/530/H810 mm -Weight: 70 kg