Used 3 Axis Digital Display for sale (44,078)

Condition: new, Year of construction: 2024, carrying capacity per cantilever arm: 500 kg, shelf height: 3,200 mm, total length: 2,100 mm, total height: 3,200 mm, axle spacing: 1,000 mm, load capacity per stand: 2,500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack stands, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) 12 cantilevers with 1.8 m usable depth (for chipboard with approx. 2.1 m depth) Longitudinal and diagonal struts for 4 m rack length (distance 1.3 m) Fastening material (screws, nuts and washers) Net price: €2,490.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Rack height 3,200 mm - Load capacity per stand 2,500 kg Lsdpfx Asqt Dmyjanoak - Base section and cantilevers with 1,800 mm usable depth - (for 2,100 mm chipboard depth) - Cantilevers height adjustable in 100 mm increments - 4 screwable screws per stand Cantilever arms, standard (= 5 storage levels) - Load capacity per cantilever arm 500 kg - Including longitudinal and diagonal braces for 1,000 mm spacing - Shelf length = 2,100 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Made in Germany - Short delivery time Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery for stock items can take place in approx. 1 week after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: good (used), Year of construction: 1996, operating hours: 5,500 h, Wide belt sander with 1100 mm sanding width Lsdpfx Aasghymhonoak 1. aggregate rubberized roller 2. aggregate electron. 3 stage motor with left and right rotation selectable 3. aggregate electron. Electronic link shoe with infinitely variable belt speed 4. blowing duct 2 stage feed Vacuum carpet

Condition: ready for operation (used), Year of construction: 2005, Pallet changer TOOLPAL 3 R Ledpfx Asr Hnglsanjak 12 compartment

Condition: new, functionality: fully functional, mileage: 10 km, power: 103 kW (140.04 HP), first registration: 02/2025, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, Equipment: ABS, air conditioning, cruise control, soot filter, traction control, trailer coupling, Peugeot Boxer 3-way tipper new car German car immediately available Double cab 7-seater ALSO AVAILABLE Single cab Lajdpevzz Hvefx Aanok Rear view camera, air conditioning, Bluetooth, cruise control, trailer hitch, radio, and much more. We are happy to offer leasing or financing!

Year of construction: 2014, condition: excellent (used), Powder / Ingredient Depositors Qty 3 available Stainless steel Year 2014 Lasdpfsurf Tkox Aanek In excellent condition

Condition: good (used), Year of construction: 2001, feed length X-axis: 600 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, CNC milling machine KUNZMANN - WF7/3 X-Axis: 600mm Y-Axis: 400mm Z-Axis: 400mm Table Length:650mm Table Width: 400mm Table load: 250 Stroke pinole:40mm Length: 2800mm Width: 2400mm Laodpfjwq Ndgox Aanok Height: 2100mm Weight: 2000kg

Condition: like new (used), 800 m² storage platform Schäfer R3000 3-story used, top condition, as good as new, see pictures 3 floor shelf system Schäfer Lift included Manufacturer SCHÄFER R3000 CAD planning and assembly 3-storey Partial sale possible Negotiation price: on request! Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. More info on request. Constantly over 5000 running meters of pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, specifications and prices and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Laodpfx Aashzw Ivjnek Purchase / Sale We are constantly looking for, or offer numerous items from various areas broom-clean business clearances company liquidations Fast- flexible - ready to hit! We also clear and dispose for liquidators. Write us with some keywords, we will contact you immediately. To get to our site, please click on our logo!

Condition: new, Year of construction: 2025, machine/vehicle number: EAN0729389556525, total length: 17,100 mm, shelf height: 3,500 mm, shelf length: 5,700 mm, load per truss pair (max.): 3,000 kg, frame width: 1,100 mm, number of shelf rows: 3, 3 two-bay pallet racks (M35112711-3) each 5.7 m long, 3.5 m high, 1.1 m deep, each 2 bays, 2.7 m wide, each 3 beam levels, shelf load 3000 kg. - 9 frames (RM3511 - RAL5019) - 18 base plates, shims, screws - 36 floor anchors (ZZBA1210) - 36 individual beams (T2711 - RAL2008) - 3 load plates (BSMcP) Frames bolted, not pre-assembled Lodsv Urpzepfx Aaneak Freight / Delivery: - max. 20 working days after receipt of payment - ex works site / installation location - Unloading from the truck is carried out by the buyer using their own lifting equipment - Deliveries are made throughout the Federal Republic of Germany; except islands! Deliveries to EU countries are subject to individual agreement.

Condition: excellent (used), Year of construction: 2013, Description For sale is a fully functional and very well-maintained gas burner from the brand Weishaupt, including gas train (Dungs DN 80) 1. Burner type: WM-G30 Capacity: 600-5700 kW Laedpfxswgbq Do Aanjk Version: ZM Year of manufacture: 2013 Connection pressure: 15-500 mbar

Condition: used, Electric roll Bending Machine 3 rolls Maxi Length: 1000 mm Maxs Thickness: 3 mm Rolls diameter: Ø 80 mm Dimensions (L x W x H): 2000 x 1000 x 1000 mm Weight: approx 1 T Ledpfx Aaow Ti Uvonjak

Condition: new, functionality: fully functional, 3 DEMAG rope guides new / rope guide, crane hoist parts For hoist type DH1000 / DH1200 Item no. 824800 / black or 824802 white / left, for 20mm rope Well below manufacturer's retail price 25% of original price (€2,000.00 net) Partially in original packaging, unused Info: We have over 20,000 DEMAG articles in stock! Over 20,000 DEMAG spare parts in the warehouse! Check my other offers from stock as well! Lajdpfxev Uu T Nj Aanjk

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, laser type: fiber laser, pipe diameter (max.): 9,000 mm, input voltage: 380 V, input frequency: 50 Hz, type of cooling: water, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, model: GS-HG Maximum length of pipe: Laodpfxewwqvwj Aanjk

Condition: like new (used), 2.500 m² storage platform Schäfer R3000 2-3 storeys used, top condition, as good as new, see pictures Manufacturer SCHÄFER R3000 CAD planning and assembly 2-3 floors Price on request! Partial sale possible Negotiation price: on request! Goods are in stock and promptly available Transport and assembly possible on request. Visits are possible at any time by appointment. Further information on request. Constantly over 5000 running meters of pallet racking from numerous manufacturers in stock. (Changes and errors in the technical data, information and prices and subject to prior sale! See our AGB, all prices excl. VAT from stock) Purchase / Sale We are constantly looking for and offering numerous articles from various areas Lasdpfsfiqhljx Aanek clean-swept premises Liquidations Fast - flexible - ready to hit! We also clear and - or dispose for liquidators. Write to us with a few keywords and we will contact you immediately. To get to our site, please click on our logo!

Year of construction: 2023, condition: new, - modern ergonomic design - manual test with analogue Measuring Clock (Reading accuracy 0.2 HR) - easy to use and quick test process - Height Capacity approx. 185mm - Hepth Capacity approx. 160mm - Dimensions 545x182x755mm Test loads: 60 / 100 / 150kg Test method: HRA/HRB/HRC Ledjpbbc Hopfx Aanoak Standard delivery: - Hardness tester - V-Anvil - Flat Anvil Ø150mm - Flat Anvil Ø50mm - Ball Indenter 1/16" with ball - Diamond indenter 120° Rockwell - Spindle protection - Accessory case

Condition: good (used), functionality: fully functional, Year of construction: 2021, operating hours: 937 h, 3D printer manufacturer 3D Systems Project 2500 plus Year of construction 2021 Laedsuvingspfx Aanjk Total printing time 937 hrs.

Condition: used, axle configuration: 3 axles, first registration: 10/2005, color: other, Year of construction: 2005, Empty weight: 3.750 kg Ljdpfx Aasucxu Isnjak Axle 1: left 12 mm right 7 mm Axle 2: left 4 mm right 6 mm Axle 3: left 10 mm right 10 mm We have the possibility to stack trailers!

Condition: as good as new (ex-display), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 0153, Specification Europa VS660 Centre height 330mm Distance between centres 1500mm Swing over bed 660mm Swing over cross slide 430mm Spindle bore (max. bar dia) 104mm Spindle nose mounting D1-11 Camlock Taper in spindle bore No. 7 Morse Swing in gap 860mm Width of bedways 480mm Total travel of cross slide 390mm Total travel of top slide 190mm Total travel of tailstock barrel 300mm Spindle speeds (infinitely variable) 18 – 1400rpm Drive vee belt and clutches Spindle motor 20HP Imperial pitches (73) 2-84TPI Diametral pitches (27) 8-72DP Metric pitches (51) 0.2 – 14mm Module pitches (20) 0.2 –3.5 MOD Approx. weight 3800 kg Machine in Imperial execution Europa VS660 Gap Bed Centre Lathe in stock in the UK Machine equipped with Fagor 2 axis DRO system with CSS ( Metric and imperial read out options) 3 jaw chuck Quick change toolpost and toolholders Rapid power traverse to saddle Laodpenxi H Uofx Aansk lighting Coolant system Chuck guard Rear splash guard

Year of construction: 2023, condition: like new (used), machine/vehicle number: 530211, Properties: → robust machine housing made of cast iron → automatic loading and unloading of the test force → change between lens and indenter automatically → LED lighting → digital measuring eyepiece → LCD color display touch screen → Conversion to other hardness scales (e.g. HRC) → easy to use Technical data: → Test loads in kg (0.3 / 0.5 / 1 / 3 / 5 / 10 / 20 / 30) → Test method Vickers → Eyepiece 10X → automatic Revolver → Objectives 10X / 20X / 40X → Test force application 50µm/sec → height Capacity max. 210mm → depth Capacity max.160mm → Conformity: DIN EN ISO 6507 / ASTM E-384 → Weight approx. 75kg → Power supply 230V / 50Hz Standard delivery: → Hardness tester → Diamond indenter 136° Vickers → Flat Anvil Ø80mm → V-Anvil Ø80mm → Eyepiece → Objectives 10X / 20X / 40X → LED lighting → Power cable → Accessory case → Operating instructions OPTIONALS: Lajdpfxjc Ipc Us Aanjk → VMS3-Software (Video-Measuring-System) → X/Y-Stage 200x200mm (Movement 25 x 25mm) → Digital micrometer (to transmit the edge distance to the VMS3-Software) → “Automatic measurement” module (only in combination with VMS3-Software)

Year of construction: 2023, condition: as good as new (ex-display), machine/vehicle number: 520511, Features: → robust machine housing made of cast iron → automatic loading and unloading of the test force → automatic change between lens and indenter body → LED illumination → digital measuring eyepiece → LCD color display touch screen → conversion to other hardness scales (e.g. HRC/HB) → easy operation Technical data: Lsdpfxsc Ipcko Aanjak → test loads in grams (10 / 25 / 50 / 100 / 200 / 300 / 500 / 1000). → Vickers testing method → cross table 110 x 110 mm / travel 25 x 25mm → eyepiece 10X → automatic obejctive turret → objectives 10X / 40X / 60X → max. specimen height 90mm → max. specimen depth 110mm → conformity: DIN EN ISO 6507 / ASTM E-384 → weight approx. 50kg → power supply 230V / 50Hz Scope of delivery: → hardness tester → diamond indenter 136° → Cross table 110 x 110mm → Eyepiece 10X → revolving nosepiece → Objectives 10X / 40X / 60X → LED illumination → Power cord → Accessories case → Instruction manual OPTIONAL → VMS3 software (video measurement system) → Digital micrometer (for transferring the edge distance into the VMS software) → Module "automatic measuring" (only in connection with VMS3 software) → PC system / monitor

Condition: like new (used), functionality: fully functional, Year of construction: 2023, - Automatic hot mounting press - Product details: - corrosion-resistant table model with automatic hydraulic hot mounting - electro-hydraulic automatic system - 7-inch user-friendly LCD touchscreen system - Preset programming and data storage parameters (up to 100 memory locations) - Setting of heating time, cooling time, assembly temperature, Ljdet Dvyfepfx Aaneak pressure build-up and cycle start via the LCD touchscreen - Cooling process - slow cooling, medium cooling and fast cooling mechanism. - Easy replacement of the mold assemblies - Sliding locking mechanism - Automatic water cooling system - Timer buzzer display for heating and cooling cycles - Possible sizes: 1 inch, 1 ½ inch, 2 inch, 30 mm, 40 mm and 50 mm - Power supply: 230 V / 50 Hz - Machine color: 3-Rath design (grey/red)

Condition: good (used), Ring bending machine, profile bending machine, bending machine, pipe bending tool, pipe bender, pipe bending machine, mandrel bending machine -Manufacturer: Dako Gedore, electro-hydraulic pipe bender on a mobile base -Pipe diameter: 3/8" to 3" Lodpfxox Nfhro Aanoak -Stroke: 320 mm -Motor: AEG 1.5 kW -Accessories: incl. bending jaws up to 3" (see photos) -Transport dimensions: 1140/1045/H1200 mm Total weight: 389 kg

Condition: excellent (used), Drilling machine for turned components Triade Laedsx Dra Uopfx Aanok Number of drilling units: 3

Condition: good (used), Code: 0124 Brand: ORMAMACCHINE Model: P30/3 Lodpfex I Az Tjx Aanjak Hydraulic cold press for furniture, kitchens, wooden doors, custom-made furniture, composite materials, aluminium, plastics and various materials Technical data: Platen size mm 3000 x 1200 N° 3 hydraulic pistons Opening mm 500 Total thrust ton 15 Motor Hp 1,5 Overall dimensions mm 3300 x 1300 x 2100 h Weight kg 1100

Condition: used, maximum load weight: 29,160 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 09/2007, loading space length: 9,700 mm, loading space width: 2,330 mm, loading space height: 2,000 mm, loading space volume: 45 m³, total width: 2,550 mm, total height: 3,800 mm, Equipment: ABS, Aluminum rear tipping body, approx. 45 cubic meters, automatic-mechanical 4-hook locking system, 1 grain pusher, roll-over tarpaulin, aluminum drop legs, loading gauge, ABS, EBS, BPW EcoPlus axle(s), aluminum rims, disc brake system, air suspension with lifting/lowering device, lift axle, vehicle can be covered with advertising and/or lettering. Laedpfx Aaoxrxmwjnok Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is desired, we would be happy to provide you with a quote from our partner workshops! The vehicle can be covered with advertising and/or lettering. Our general terms and conditions of delivery and payment apply. We would be happy to provide you with a financing or leasing offer for this vehicle. Please contact us!

Condition: used, mileage: 1,40,000 km, power: 115 kW (156.36 HP), first registration: 12/2010, fuel type: diesel, overall weight: 7,490 kg, color: white, gearing type: mechanical, emission class: euro5, number of seats: 3, total length: 6,470 mm, total width: 2,460 mm, total height: 2,530 mm, loading space volume: 4 m³, loading space length: 3,800 mm, loading space width: 2,300 mm, loading space height: 400 mm, Equipment: ABS, Meiller three-way tipper body, raised front wall approx. 700 mm, 4 pairs of recessed lashing points in the floor, ball and jaw type trailer coupling, aluminium toolbox behind the cab, Telligent brake system with ABS/ASR, roll restraint, cruise control, engine start-stop system, standard driver's suspension seat, centre seat, electrically adjustable exterior mirrors, rear cab window, roof hatch, leaf spring suspension. The vehicle may have advertising stickers and/or lettering applied. Our offer is generally without a new technical inspection (TÜV). If a new TÜV inspection is required, we would be happy to provide an offer via our partner workshops. The vehicle may be covered with advertising stickers and/or lettering. Our general terms and conditions of delivery and payment apply. We are happy to provide you with a financing or leasing offer for this vehicle. Please contact us! Lsdpfx Aajxz Na Honeak