Used 5 Head Moulder for sale (32,400)

Condition: excellent (used), Here we offer you a DÜRR test station for adhesive heads. DÜRR test station for glue heads included (5 robot guided glue heads) DÜRR test station (self-built Dürr) for the automotive industry Weight: 1200 kg Type: DÜRR test station for glue heads Knjdjmhftdepfx Aabsc Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: M08I/8897, Offer Number: M08I/8897 Machinetype: 5 die - 5 blow transfer header Info: bushing cut-off , PKO Make: SI MILANO WAFIOS Type: SI 150 Constr. year: 2005 diameter range: 16 mm number of dies: 5 number of stations (incl. cut off): 6 Kodpfswi Tg Nex Aabenc output - pieces/min: 150 shaft length under head: 125 mm cutting length: 160 mm Location: Germany

Condition: excellent (used), set of tools, planer heads for moulder Knodpewbwkcefx Aaboc

Year of construction: 2017, condition: like new (used), I sell the moulding heads for the automatic fourside moulder WACO Weinig Gruppe. Inside diameter 50mm Outside diameter (with knives) 170mm Body diameter 155mm 15 pcs. working length 200mm (without knives). 8 pcs. working length150mm (with knives) Knedpehzr Stjfx Aabsc Each with Hydro holding. Price per pc. 500 Euro. Sellable per pc. or totally together. Available immediately.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 111-011481, RudeK double girder overhead traveling crane ZLK, load capacity 5to+5to (bridge max. 10to), span approx. 23950 mm, classification EN 13001 incl. crane and trolley travel limit switch incl. load spectrum accumulator. Box girder construction: incl. derailment protection, incl. steel construction RAL 1007, design in accordance with applicable standards and regulations. Additional equipment: with load display in the radio Kedpfovhccrsx Aabjnc

Condition: good (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 39035, NATIONAL 750 S3 5 Dies Knodjtmtd Eepfx Aaboc Cutoff: ø 22 ( 480 N/mm2) - ø 19 ( 600N/mm2) Kickout Stroke -Die: 100 mm Heading Load: 2730 kN Universal Transfer II

Condition: used, Year of construction: 1986, functionality: fully functional, machine/vehicle number: M08L/8030, Offer Number: M08L/8030 Machinetype: 5 die - 5 blow transfer header Info: bushing cut-off , PKO , IFO , Slug feeding possible Make: SAKAMURA Type: BPF560S Constr. year: 1986/08/20 diameter range: 16-34 mm number of dies: 5 number of stations: 6 cutting length: 210 mm shaft length under head: 180 mm output - pieces/min: 55-80 press power: 450 t Location: In our warehouse Kodpfx Aaowi Uclebonc

Year of construction: 1996, condition: good (used), machine/vehicle number: 25295, Capacity (mm): 24x150 Production (max): 120 ppm Optional Warm Former Knsdpfx Aaedv T Hlobsc

Condition: used, Year of construction: 1988, functionality: fully functional, machine/vehicle number: M08I/9027, Offer Number: M08I/9027 Machinetype: 5 die - 5 blow transfer header Info: bushing cut-off Make: SAKAMURA Type: BPF540 Constr. year: 1988 diameter range: 23 mm number of dies: 5 number of stations (incl. cut off): 6 Kodpjwzkqpofx Aabonc cutting length: 190 mm shaft length under head: 175 mm output - pieces/min: 120 press power: 220 to press power: Location: Germany

Condition: used, Year of construction: 1988, functionality: fully functional, machine/vehicle number: M08I/9030, Offer Number: M08I/9030 Machinetype: 5 die - 5 blow transfer header Info: bushing cut-off Make: SCHULER Type: GB5-15 Constr. year: 1988 diameter range: 8-18 mm number of dies: 5 number of stations (incl. cut off): 6 shaft length under head: 120 mm cutting length: 140 mm output - pieces/min: 60-170 Kodpfowzkp Sjx Aabjnc press power: 100 to Location: Germany

Condition: used, Year of construction: 1995, functionality: fully functional, machine/vehicle number: M08I/8958, Offer Number: M08I/8958 Machinetype: 5 die - 5 blow transfer header Info: bushing cut-off , PKO , Forma packs Make: NATIONAL FORMAX Type: FX35CF Constr. year: 1995 diameter range: 11,8 mm Ksdpfx Ajwm Rufoabjnc number of dies: 5 number of stations: 6 cutting length: 3 - 45 mm shaft length under head: 50 mm output - pieces/min: 85 - 255 press power: 50 to Location: Germany

Condition: excellent (used), Catalog number 7640 ADVANTAGES – the best wide planing machine for wet and dry wood – ideal for processing logs, flooring, etc. – 2 planing shafts + 3 spindles – manufactured by the German brand KUPFERMUHLE – used planer, very good condition TECHNICAL DATA - max planing width 610mm - max planing height 200mm - from above: - input pulling shaft, toothed - pawls - pressure - 2 pulling shafts, toothed Knodpfxewgayqo Aabsc - pressure - 610mm planing shaft, 6-knife 15kW - pressures - pulling shaft, smooth, output - from below: - side pressure at the input - guide strip - input table - pulling shaft, toothed - 610mm planing shaft, 6-knife 7.5kW - 2 smooth pulling shafts - side pressure at the outlet - at the back: 2 side spindles + pressures: 1) vertical right 200mm 15kW 2) vertical left 200mm 15kW - left vertical spindle electrically adjustable right/left - spindle diameter 40mm - spindles set alternately - spindles adjustable up/down, right/left 3) additional horizontal lower spindle 160mm, adjustable up/down + right/left 5.5kW - spindle diameter 35mm - at the outlet: 2 upper metal sliding rollers, 2 lower pulling rollers, rubber - adjustable rollers in the lower table - electric planing height adjustment - 6 types of feed speeds 12.8/16.3/20/25.6/32.6/40m/min - feed motor 8kW - diameters of the exhaust port 2×120, 2x160mm - dimensions length/width/height 2980x1980x1800mm - weight about 3500kg Net price: PLN 66900 Net price: EUR 15740 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, Electric chain hoist 3000kg 18m lifting height Nitchi industrial crane For sale in excellent condition NITCHI MH-5 thr chain hoist crane 18 meters lifting height. Kedpfx Aowbwfaeabsnc makeNITCHI MH-5 year of manufacture: 2016 load capacity 3000kg / 1 branch lifting height: 18 meters lifting speed: 4.4 meters / minute mains voltage: 3 phases 400v 50Hz electric power: 2.5kw 6.9 A 1-speed manual control chain holder. weight: 130kg

Condition: like new (used), Year of construction: 2020, operating hours: 50 h, machine/vehicle number: LW250*1000, Decanter centrifuge manufactured in 2020, but put into operation in May 2021! The machine is in like new condition (used in total approx. 50 operating hours)! The decanter is for sale due to a change in technology, it works flawlessly! Manufacturer: YIXING HEAD SEPARATOR MACHINERY CO. LTD., CHINA Year of manufacturing date: 2020 Serial Number: LW250*1000 Machine signal: 02-001 Decanter indication number: 2647 Sludge formation capacity of decanter: 500 kg/h Main motor capacity: 7,5 KW Vice motor capacity: 3 KW Capacity: 1-5 m3/h Netto weight of decanter: 1000 kg Material of wetted parts:1.4404 Kjdpspu A D Aofx Aabjnc Feed volume flow: 0,5t – 3t/h Stainless steel Reference number: 2590

Condition: good (used), functionality: fully functional, mileage: 5,40,000 km, power: 323.62 kW (440.00 HP), overall weight: 26,000 kg, fuel type: diesel, axle configuration: 6x4, fuel: diesel, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel-air, Year of construction: 2011, first registration: 07/2011, Equipment: ABS, crane, cruise control, differential lock, hydraulics, Good condition! Ready to drive! 6X4 LEAF/AIR SUSPENSION Crane Hiab 211-5 with radio (year 2011) Kjdpoufch Djfx Aabjnc 5 extensions with rotator (15m) Euro 5

Condition: excellent (used), Year of construction: 2014, Operating hours: 78,000 hours 5 kW resonator Annual maintenance by Trumpf Kedpjwd Ng Uofx Aabenc

Condition: new, Year of construction: 2025, load capacity: 5,000 kg, Column Lifting Rotating Device with 5-Ton Capacity Protec Syncrolift Rotating Device/Positioner Double Column, Wireless and Manual Remote Control Column Adjustment with Two Travel Modes Load Capacity 5000 kg, 360° Minimum Working Height: 700 mm Maximum Working Height: 1600 mm Kodewak U Eopfx Aabenc Speed: 0.5 rpm Clamping Plate Diameter: 700 mm Rotating Motion: 1.1 kW 2 to 10-Ton Capacity Available Upon Request

Condition: excellent (used), Catalog number 7275 Ksdpfx Aerq Db Doabonc TECHNICAL DATA - max planing width 610mm - max planing height 200mm from above: - toothed, pulling input shaft - pawls - 2 clamps - toothed pulling shaft - clamp - 610mm, 4-knife 7.5kW planing shaft - clamps - smooth pulling shaft from below: - guide bar - adjustable input table with smooth sliding, divided shaft - 610mm, 4-knife 5.5kW planing shaft - 2 smooth, sliding, pulling shafts - side clamp from behind: - side spindles + clamps 2: 1) vertical right 5.5kW 2) vertical left 5kW - max planing height on side spindles 200mm - spindle diameter 35mm - spindles adjustable up/down, right/left 3) additional horizontal spindle 160mm, adjustable up/down + right/left + angle approx. 4kW - possibility of planing with an additional spindle from the top/bottom/side - spindle diameter 35mm - adjustable rollers in the lower table - 2 types of feed speeds - feed motor 2.2kW - diameter of the exhaust port 120mm - dimensions length/width/height 2550x1700x1350mm - weight approx. 3000kg ADVANTAGES - wide planing machine for wet and dry wood - ideal for processing logs, flooring, etc. - 2 shafts horizontal planing + 2 vertical spindles + 1 horizontal spindle - heads included - manufactured by the German brand KUPFERMUHLE - used planer, very good condition Original photos Net price: PLN 58,900 Net price: EUR 13,850 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, throat depth: 180 mm, pressing force: 5 t, table width: 450 mm, table length: 320 mm, operating speed: 300 mm/s, overall weight: 270 kg, type of input current: three-phase, oil tank capacity: 9 l, Hydraulic Press Atsugi AP-5-KL Used Load Range: 20-50 (kN) Stroke (mm): 150 Lower Speed ​​(Approach Fast Speed: 350 (mm/s) Lower Speed ​​(Under Pressure Slow Speed: 36mm/s Rise Speed ​​250 (mm/s) Working Area Open Height: 250mm Open Depth: 180mm Table Size: 450x50mm Motor Specification 3 Phase AC200V 4P 1.5KW Two-Hand Operation . Kjdjvbdpyopfx Aabonc Mobile Worktable Fuel Oil / Quantity Daphni Hydraulic 46/9L Total Weight (kg) 270 Body Size ​ Height (mm) 986 Width (mm) 485 Depth (mm) 920

Condition: new, Year of construction: 2025, IF-100 moulder infeed (100 m/min). Max length 6m. The flat chain feeder transports parts across to the fence. The part next to the fence is detected by a light beam and the the first roller is raised to allow entry and then pushes the workpiece under the feed rollers of the planer. The first feed roller of the planer needs to be freewheeling roller to allow correct operation of the infeed. Knodsxhfycopfx Aabjc OF-100 moulder outfeed. Automatic deposit on a belt conveyor and cross infeed. Manual destacking Approx. floor space requirement: length 8m, width 2,5m . Suitable for max 100m/min feed speed.

Condition: good (used), Year of construction: 2014, 155 USED Freezer, walk-in freezer. Important: This appliance does not include any external units. TECHNICAL DATA: Kedpfx Ajxgp Iusabsnc - Internal temperature: -18 to +20°C - Power: 13.5 kW - Year of manufacture: December 2018 INTERNAL DIMENSIONS (in cm): - Width 370, - Length 610, - Height 250. EXTERNAL DIMENSIONS (in cm): - Width 390, - Length 653, - Height 280.

Condition: excellent (used), For sale: professional forestry winch Schlager & Reichart Maschinenfabrik (Marktoberdorf, Germany). The machine is fully complete, features a robust design with PTO drive, and is ready for forestry operations. Model: Type 5119 2R – 836 Year of manufacture: 1991 Pulling force (inner cable): 5 tons Pulling force (outer cable): 3.5 tons Cable diameter: 12 mm Working pressure: 155 bar Drive: PTO shaft, 540 rpm Ksdpfx Aaexcaaaobsnc Structural strength (Bruchlast): 12.6 tons Solid guard, protective mesh, adjustable supports Full set of mechanisms, control levers, hydraulic outlets Condition as shown in photos – the equipment was previously used by a German municipal service (Stadt Gotha Gartenamt), meaning it has been regularly maintained and is in good condition.

Condition: used, diameter div. number 36x tool adaptor BT 40 Kjdpfsww Nb Eex Aabenc

Condition: ready for operation (used), functionality: fully functional, total length: 2,700 mm, total height: 120 mm, total width: 50 mm, load capacity: 3,000 kg, Meta Multipal Beams – approx. 270 cm | Inspected & Used The Meta Multipal beams with an approximate length of 270 cm are from inspected used stocks and are available for immediate delivery from our warehouse. They are ideal for expanding existing Meta pallet racking and heavy-duty shelves. Additionally, they are compatible with the Jungheinrich system Type S – making them flexible for various warehousing requirements. Thanks to their robust construction and original design, they are reliable for daily warehouse operations. Specifications: - Length: 270 cm - Height: 12 cm - Width: 5 cm - Racking system: Meta - Type: Multipal - Load capacity: up to 3000 kg - Includes safety pins Ksdpexny D Nsfx Aabsnc - Original part no.: 402 6212 441291 - Used items, available from stock, immediate delivery possible. -- MULTIPLE UNITS IMMEDIATELY AVAILABLE -- Price: €25.00 net €29.75 gross You will receive an invoice with VAT shown separately. HAVEN’T FOUND THE RIGHT SOLUTION YET? Visit our website for a quick overview of many offers and product variations! Transport: Delivery is available upon request by our partner freight forwarder, with costs depending on your postal code. Assembly: Our trained personnel are available to assist you professionally with the assembly and disassembly of your equipment as needed. Our recommendation: Let us know your requirements... We are happy to assist you in realizing your projects, from planning and ordering to assembly. INTERESTED OR HAVE QUESTIONS? Feel free to contact us by message or phone call. You can find our phone number on our company page. ☎️ We are available by phone Monday to Friday, 08:00 - 15:00. Alternatively, send us a message with your name and number, and we will get back to you as soon as possible.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, cooling capacity: 680 kW (924.54 HP), Equipment: cooling unit, condenser Manufacturer: Güntner GVH 090.1.D/5-M(D) Year of manufacture:2004 Nominal power 680.4 /579.2 kw Refrigerant:R404 Refrigerant content:218.9+25 liters Flow rate: Temperature range: -50°C- +100°C Max pressure: Operating pressure: 28bar/-1bar Kodpfx Aaovllxdsbenc (performance depends on usage parameters) Number of fans: 5 pcs, diameter 900 mm, Air flow:162500 /131000 m3/h Motor power consumption:17.60/11.50 Kw Heat exchanger aream2 Operating noise 52 dB Length: mm Height: mm Width: mm Weight: ca kg The radiator has been technically inspected, fully functional