Used 5 Head Moulder for sale (66,160)

Condition: used, Year of construction: 2008, Overview  This stretch blow-moulding machine was manufactured in 2008 by Italian company KOSME (Krones Group). The machine is in good working condition and remains in production until end of November 2025. It will then be dismantled and craned out through the roof. Technical data  Capacity: 10,200 bph Working hours: ~50,000 h Formats: Neck finish: 29/21 (can be modified to 1881 or others) Preforms used: R-PET by Plastipak & Resilux Number of moulds: 6 (moulds not included) Equipment & Features: Quick change for shell molds Kosme linear oven 8 heating modules Kosme preform tipper with conveying system Kosme preforms feeding rail Kosme electrical cabinet Kosme Danfoss VLT drive Kosme touch screen control panel Set of spare parts (list on request) Service history: Kosme FBA maintenance Complete Kosme service in October 2024 Ongoing service by in-house technicians Scope of Delivery  Stretch blow-moulder KOSME KSB 6R Preform tipper with conveying system Preform feeding rail Electrical cabinet Drive and control panel Spare parts list (on request) Nedpfjyb Tbiox Adwokt

Condition: used, Year of construction: 2002, Overview  This model USP-2 blow molding machine was manufactured by UROLA in 2002 and is designed for the production of PET bottles with a throughput of 800 bottles per hour for 5-liter bottles and 2,200 bottles per hour for 1-liter bottles. The machine has already been dismantled and stored and can be viewed by appointment. It supports the production of bottles in sizes from 250 ml to 5 liters. Technical details   Output: 800 bottles/hour (5-liter bottles) 2,200 bottles/hour (1 liter bottles) Formats: 250 ml to 5 liters Weight: 3,500 kg Condition: Already dismantled and stored Inspection: Possible by appointment Nksdpou Huydefx Adwjt

Condition: used, Year of construction: 2008, Overview  The machine was built in 2008 by the former manufacturer SIG Corpoplast (now KHS). The machine is still in operation and can be inspected at any time. Technical data Capacity: last 21.115 bph (at 1,5l)  Formats: 500ml, 750ml, 1.000ml, 1.500ml  PCO 1881  Operating voltage: 400V/ 50 Hz   Control voltage: 24 VDC  Scope of delivery  Blow molding machine | SIG Corpoplast | BLOMAX 12 | 2008  Preform feeder | Transver AG | - | 2008 Silo  Elevator  Sorting Chute Nkedpfeplgmbjx Adwst

Condition: used, Year of construction: 2021, Overview  This isobarometric filler was built in 2021 by the German manufacturer Markl. It can fill cans abd glass bottles. This filler is available because the seller is selling the complete equipment. It has only a few operating hours and can be viewed in person at any time.   Technical Details  Type: Isobarometric filler for bottles and cans Capacity: 8,000 bottles / hour (depending on format) Number of filling valves: 20 Formats:  Bottles: 0.33 L Longneck and 0.75 L Cava Cans: Standard 0.33 L and 0.44 L Counter-pressure filler Running direction: left - right Dimensions (L x W x H): 2.0 m x 1.8 m x 2.5 m Operating History: In operation: June 2021 – June 2024 Last production run: June 2024 Dismantled: February 2025 Estimated total working hours: approx. 625 hours (~500,000 liters filled at 2,500 units/hour) Good condition, ready for reinstallation. Nksdpfx Aet Rmhmsdwot

Condition: used, Year of construction: 2003, Overview The blowmoulder was built in 2003 by the manufacturer SIPA. The machine is still in operation and can be visited. It is used in a mineral water factory. The blowing machine is in good condition due to regular maintenance and technical upgrades, which have been well documented. Technical data  Nominal capacity: 24,000 bph for each format Nr. of moulds: 20 Last used formats: 0,33l (2 sets) 0,4l 0,5l (4 sets) 0,75l (2sets) 1,0l Dimensions: 7600 x 4200  x 4400 Weight of empty machine: 18,5t Weight of full machine, working condition: 24,5t Blowing air recovery system Overhaul for about 200,000 € recetly performed 161800 operating hours Scope of delivery  SFR 20 Preform feeder Preform hopper Spare parts vrious sets of moulds Documentation Program backup Nkodpfx Aeu Nph Ijdwot

Condition: used, Year of construction: 2017, Overview  This 5/10hl 3-device brewhouse was manufactured in 2017 by the Austrian manufacturer Labu. The brewhouse has various automation features such as automatic starting, automatic sparging and automatic spent grains discharge. It is currently available for sale, including additional equipment. Technical data  Capacity: 5/10hl Electrical heating: 27kW / 400V (special ceramic heating element) Equipment: 3 appliances: brewing kettle, lauter tun, whirlpool Additional equipment included: Manual filler (wall-mounted) Keg filler 2 fermentation and storage tanks (650L each) 1 fermentation and storage tank (1200L) All tanks from L-Inox, equipped with jacket and cone cooling (3 bar operating pressure, tested up to 4.5 bar) Glycol cooler Plate heat exchanger Scope of delivery  1x 5/10hl 3-device brewhouse (brewing kettle, lauter tun, whirlpool) 1x manual filler (wall-mounted) 1x keg filler 2x fermentation and storage tanks (650L, L-Inox, with jacket and cone cooling) 1x fermentation and storage tank (1200L, L-Inox, with jacket and cone cooling) 1x glycol cooler 1x plate heat exchanger Nsdpfxoyb R Ito Adwekt

Condition: used, Year of construction: 2020, Overview  This can filler and seamer was manufactured in 2020 by the Italian company Eurostar. The Canfill 5 One is a compact and efficient filling and closing system designed for small-scale beverage producers. Suitable for both carbonated and still drinks, it offers an ideal solution for breweries, cider producers, or craft beverage facilities looking for professional filling performance in a small footprint. The machine has seen very limited use — only about 1,500 cans have been filled — and is therefore in excellent, near-new condition. Technical data  Capacity: 2,000 cans/hour at 0.33 L 1,500 cans/hour at 0.5 L Compatible formats: Standard and Sleek cans (not suitable for Slim cans) Filling system: Isobaric (for carbonated products) Product types: Beer, cider, soft drinks, or similar beverages Condition: Used – as new (only 1,500 cans filled) Nodpfjxnmv Eex Adwekt

Condition: used, Year of construction: 2000, Overview  This PET blow-moulding machine was manufactured in 2000 by French company SIDEL. The machine is currently in good working condition, running in production until the end of November 2025. It will be dismantled and craned out through the roof, with craning scheduled for December 2025. It becomes available after dismantling. Technical data Capacity: 7,600 bph on 1.0 L Formats: Neck finish 29/21 Preforms processed: RPET Plastipak & Resilux Number of moulds: 6 (moulds not included) Equipment & Features: Quick change for shell molds Sidel caterpillar oven 6 heating modules Sidel preforms tipper Sidel preforms hopper & feeder Sidel preforms infeed rail Sidel caterpillar oven & blowing wheel Solenoid valves Sidel Universal type Sidel PCC version V2.02 Sidel CE electrical cabinet (Siemens) Service history: Sidel maintenance completed September 2024 Elongation sensor retrofitted Additional service by client’s technicians Scope of Delivery  Stretch blow-moulder SIDEL SBO 6 Series 2 Preforms tipper Preforms hopper & feeder Preforms infeed rail Caterpillar oven & blowing wheel Nedpfx Ajyb Tbpedwjkt

Condition: used, Year of construction: 2000, Overview The KSB3000 blowing machine was manufactured in 2000 by the Austrian machine builder KOSME. It is located at a machine builder and can be visited in dry run to see the functionality of the machine.  Technical details  Capacity: 3.600 bph  3 cavities Dimensions (LxWxH): 6830 mm x 2860 mm x 2450 mm  Space requirement approx. 9x5 m²  Weight: 4,5 t  Operating hours: 23.824   Bottles Volume: 250 ml - 2500 ml   Max. Diameter: 110 mm  Scope of delivery  Blow molding machine is completely equipped with the system for preform feeding (the silo, the preform elevator, the preform aligner and the preform infeed). Nkjdpol Hxpnjfx Adwst

Condition: used, Year of construction: 2001, Overview The blowing machine TMS 2001 G was manufactured in 2001 by Spanish manufacturer SIDE. It processes with a capacity of 1,000 bph at 5l. The machine is stored because the former user has changed to a new one. It is located in Spain and has already been disassembled and available immediately. Tech Specs Capacity: 1,000 bph at 5000 ml    Additional Equipment No blow molds included CP: Siemens simatic MP270 Nksdpfol Hx Ecox Adwjt

Condition: used, Year of construction: 2003, Overview The KSB4000 blowing machine was manufactured in 2003 by the Austrian machine builder KOSME. For capacity reasons the blow moulder is now for sale and can be visited at side. Technical details  Capacity: 4.000 bph  4 cavities Dimensions (LxWxH): 4.500 mm x 1.600 mm x 3.250 mm  space requirement approx. 22 m² (incl. preform feeding system) Bottles 1,0 l PET 0,5 l PET 0,33 l PET Scope of delivery  Blow molding machine is completely equipped with the system for preform feeding (the silo, the preform elevator, the preform aligner and the preform infeed). Also included is the air conveyor with a length of approx. 25 meter and 5 blower motor. Nksdpfswizc Eox Adwst

Condition: used, Year of construction: 1996, Overview  This Krones Lavatec KES-2-5-312/25-110 bottle washer was manufactured in 1996 and has an output of 29,000 bottles per hour. The machine has been modernized several times, including an S7 control system, caustic filtration with drum screen and pH value measurement for hot water 1. The machine will run until the end of January 2026 and can be inspected in person at any time until then. Technical details  Output: 29,000 bottles/hour Bottle diameter: 54 - 90 mm Bottle height: 180 - 340 mm Equipment & modernizations  Plastic cell with 110 pitch Suitable for swing-top bottles Bottle diameter: 54 - 90 mm Bottle height: 180 - 340 mm Modernizations: Retrofitted S7 control system Drum screen for caustic filtration Railing on the machine Hanger-specific caustic spraying in the deflector Cleaning & heating system: Rental rotating spraying Heating with tube bundle exchanger and hot water Lye concentration measurement and dosing control, also for post-caustic pH value measurement for hot water 1 Soaking & rinsing system: Double pre-soak with sieve belt Lye volume: 30 m³ Caustic solution, hot water 1, hot water 2, cold water and fresh water Head section can be steamed and rinsed with disinfection H₂ suction Nodpfx Asvxtavodwokt

Condition: used, Year of construction: 2020, Overview  This complete microbrewery system was manufactured in 2020 by German company Sudhausbau GmbH. The installation is a 5 hl, steam-heated, two-vessel brewhouse including milling, hot side, control system, steam generator, fermentation, storage, water treatment, cooling and accessories. The system is well maintained and comes with a functional guarantee upon delivery. Technical data  Brewhouse capacity: 5 hl Design: 2-vessel brewhouse Heating: Steam-heated Control: Semi-automatic PLC (Siemens) with touch panel Fermentation: Open fermenters with cooling jackets Scope of Delivery Malt Mill with Stand & Hopper | — | — | 2020 | For brewhouse feeding Brewhouse (Mash/Kettle + Lauter Tun) | Sudhausbau GmbH | — | 2020 | 5 hl, steam-heated, incl. platform & piping Plate Heat Exchanger | — | — | 2020 | Single-stage, stainless steel plates (1.4404) Water Mixing Station | — | — | 2020 | Solenoid valve, mixer, meter Brewhouse Control System | Siemens (PLC) | — | 2020 | Semi-automatic, recipe control Steam Generator | — | — | 2020 | Gas-fired, incl. water treatment, TÜV & CE Open Fermenters (2x) | Speidel | — | — | 625 L each, with cooling jacket Horizontal Storage Tanks (5x) | — | — | — | 500 L each Hot Water Tank | — | — | — | 700 L, insulated, electric heater Cold Water Tank | — | — | — | 700 L, insulated, cooled Water Cooler | — | BL 040 | — | 1.8 kW, cooling & heating function Fermentation Temperature Controllers (3x) | Cube Plug | — | — | — Mobile Pump | — | — | — | — Brewery Accessories | — | — | — | Beer hoses, kegs (30 L & 50 L), misc. parts Optional: Cold Room with Refrigeration Unit | — | — | — | Single-wall, no cooling jacket   Nsdpfex Nm Sxex Adwekt

Condition: used, Year of construction: 2024, Overview The dynamic beer filtration system 1VDCF-5-5 was manufactured in 2024 by the German company BECA. The filtration system is used to filter beer. Techn. Data Whole Plant Output: 5 hl/h Filter surface area: 5 m² Condition: as new Weight empty: approx. 800kg (net) + 300 kg (el. cabinet) Dimensions (L x W x H): 2300mm x 1300mm x 2200mm Dimensions electrical cabinet: 1000mm x 800mm x 2000mm Energy requirement: 4kW Energy consumption: 0,7-1,0 kW/hl Temperature increase: 5°C per minute due to ceramic plates Operating pressure: 1-4,5 bar Size of the pores: 200nm Features: High quality beers immediately after start up Higher dry content of the filtered yeast Extremely low energy consumption Low maintenance effort Filtration at low pressure No additional tools or additives required Modular design to increase the capacity in future Integrated CIP system Njdoxchy Ujpfx Adwskt

Condition: used, Year of construction: 2006, Overview The BLOMAX 4 blow molder was manufactured by the German company SIG Corpoplast (now KHS) in 2006. It has been overhauled by a machine builder and can be inspected in dry operation. Blow molds are not included, but can be obtained.  Technical details  Output: up to 7,200 bph 4 cavities Dimensions: 4960 mm x 3900 mm x 3000 mm  Weight: 15 t  Operating hours: 44.736  Bottles Volume: 200 ml - 2000 ml   Max. Diameter: 115 mm  Max. Length: 350 mm Preforms  Length: 60 - 200 mm Max. Support ring diameter: 35 mm  Scope of delivery  Blow molder is completely equipped with the system for preform feeding (silo, elevator, sorting, chute) Nkedpfol Hxpkex Adwst

Condition: used, Year of construction: 2001, Overview The KSB3000 blowing machine was manufactured in 2001 by the Austrian machine builder KOSME. It is located at a machine builder and can be visited in dry run to see the functionality of the machine.  Technical details  Capacity: 3.600 bph  3 cavities Dimensions (LxWxH): 6830 mm x 2860 mm x 2450 mm  space requirement approx. 9x5 m²  weight: 4,5 t  Operating hours: 19.935   Bottles Volume: 250 ml - 2500 ml   Max. Diameter: 110 mm  Scope of delivery  Blow molding machine is completely equipped with the system for preform feeding (the silo, the preform elevator, the preform aligner and the preform infeed). Nkedpfxol Hxpre Adwet

Condition: used, Year of construction: 1992, Overview This blowmoulder was built in 1992 from French manufacturer Sidel. It can produce up to 4.000 bottles per hour. Techn. Details Capacity: 4.000 bph 4 cavities Scope of delivery Blowmoulding machine | SIDEL | SBO 4/6 | 1992 Preform feeder Two types of molds for 1.5 L and 2.0 L bottles Cooling unit: RIEDEL Nkjdpenpbhvefx Adwot

Condition: used, Year of construction: 1998, Overview This machine was built in 1998 by French manufacturer Sidel. The machine is in very good working condition, is already professionally dismantled and stored in a warehouse. Techn. Details Capacity: 7.200 bph in 1,5L Number of moulds:  6 (molds not included) Equipped with quick change for shell molds Number of heating modules: 10 modules Neck personalization: 29/25      Working hours: 47.000 only         Machine was regularily maintained       Machine equipped with:            Sidel preforms elevator to unscrambler Sidel preforms unscrambler & feeder Sidel oven & blowing wheel for 6 molds Sidel electrical cabinet Sidel PCC drive & control panel Big set of spare parts list upon request Njdsrkgy Ujpfx Adwekt

Condition: used, Year of construction: 2002, Overview The blow molder was built in 2002 by the former manufacturer SIG Corpoplast (now KHS). The machine is still in operation and can be visited. Technical data Nominal capacity: 30,000 bottles/h Last used formats: 1.0L (27,000 bph) 1.25L (27,000 bph) 2.0L (22,500 bph) Bottle Volume: 200 - 3,000 ml Max. Diameter: 126 mm Length: 107 - 350 mm Preform Length: 60 - 200 mm Max. Diameter: 48 mm Dimensions (LxWxH): 9,920 mm x 6,279 mm x 3,357 mm Required space: 11,500 mm x 11,300 mm  Weight: 31.15 t Scope of delivery Blomax 20 Preform feeder VT 3010 Nkjdpfx Adjry Iiwswst

Condition: used, Year of construction: 2017, Overview The brewhouse was manufactured in 2017 by the Czech company HANSTEEL s.r.o.. With it, 5 hl can be produced. Technical details Two-chamber brewhouse with electric heating system. Nominal volume: 500l Total volume: 550l Brewhouse is mounted on separate frame with stainless steel stairs and platform Incl. cooler from Alfa-Laval: cooling of 500l in 1h from 99°C to 12°C Butterfly valves on the chimneys Agitators in both vessels with frequency converter to change the speed Strainer bucket with level sensor for automatic water refilling control of the brewhouse via a touch screen display accessible from the working platform the app needed to control the brewhouse can be installed on a portable device (e.g. tablet) and the operation of the brewhouse can be controlled remotely There is also a possibility to offer for sale open fermenting vats with a nominal volume of 1000 l (total volume 1200 l). Nsdpfx Aeuzpiiodwjkt

Year of construction: 2025, condition: new, XZ100228 Single head sawing machine Ø 400 mm for aluminium and PVC with manual blade down-feed and pneumatic vices FOM INDUSTIRE SIKA PLUS M Machine in stock Configuration: - Aluminium and PVC cutting machine with CE certification - Tungsten carbide saw blade Ø 400 mm - Manual blade lowering (with lever) with pneumatic servo control to reduce operator stress - Side support plates on both sides - Blade motor power 2.2 kW - 2850 rpm - Self-braking motor with blade stop in less than 10 sec - Cutting angle from 45°Lh to 45°Rh on vertical axis and 45°Rh to 90° on horizontal axis - Intermediate angles with mechanical stop - Cylinder blocking involuntary head lowering - Double working pressure servo-controlled in low pressure - 1 pneumatic vertical vice - 2 pneumatic horizontal vices - 1 safety servo-valve for each pneumatic horizontal vice - Conical anti-crushing buffers Njdjpl Tgmopfx Adwekt - Worktable and turntable structure in stabilized cast iron - Motor transmission by belt - Saw blade holding spindle Ø 32 mm - Spray mist blade lubrication system - Integral blade guard in rest position - Set up for the extraction of chips and fumes

Condition: excellent (used), Year of construction: 1990, LEDINEK BSG 150 head sharpener with knife setting device - in a warehouse - Slovak production TECHNICAL PARAMETERS engine power 0.55 kW sharpening length 440 mm tool diameter 125 mm - 203 mm Nksdpfx Aeihpl Rjdwjt manual feed spindle diameter 50 mm knife setting device Machine dimensions: 120/85/165 cm weight 400 kg

Condition: used, functionality: fully functional, Year of construction: 2014, overall weight: 2,116 kg, total height: 1,400 mm, total length: 1,990 mm, total width: 2,030 mm, load capacity: 5,000 kg, rotaryDevice Producing company Meyer Nsdpfx Aext Uzgedwjkt Type 5-0116N Year built 2014 Height (mm) 1,400 Length (mm) 1,990 Lifting weight (kg) 5,000 Weight (kg) 2,116 Width (mm) 2,030

Condition: used, heavy-duty tilting spindle moulder Martin T27 automatic tilting – 46° automatic height adjustment precision fence with fine adjustment control panel at eye level, swivelling, with 5.7" touchscreen spindle travel 150 mm spindle diameter 30 mm spindle with 6 speeds: 3,000 to 10,000 rpm motor 7.5 kW with electric brake machine is WORKSHOP TESTED – TOP CONDITION first delivered in 2010 machine from school environment only approx. 300 operating hours available from stock Lieboch Njdjx U Arxepfx Adwjkt

Condition: refurbished (used), Year of construction: 2025, Dear customers, we are currently offering, upon request/order, a refurbished table router, type FZ0 by F. Zimmermann. Here are the machine's technical specifications: Worktable: 590 x 420 mm Rotary movement: 360° Tilting: 2x90° Spindle power: 0.25 kW Speed: 22,000 rpm Tool holder: collet chuck with clamping nut Ø 8 mm - CE marking - Vernier stop - Plexiglas milling guard - Original base cabinet (optional) Nkedpoxlzg Hefx Adwst Dimensions: 1,100 x 1,180 x 1,760 mm Weight: 120 kg The machine has been repainted in RAL 7035 light grey, drives have been cleaned, inspected, and equipped with a new belt. With the machine, you will also receive an angle table and a set of milling tools – in other words, a complete setup! VAT is itemized separately on the invoice. Shipping available at an additional charge. Current delivery time: 6 weeks If you have any questions, please feel free to contact us!