Used Ac Chamber for sale (1,31,113)

Condition: used, Year of construction: 2000, closing pressure 900 kN clamping plate 540x540 mm distance between columns 350x350 mm weight of the machine ca. 5,5 t lock stroke 280 mm capacity of ejector 60 kN ejector stroke 70 mm height of form 160-400 mm column diameter 65 mm casting capacity 75 kN casting plunger stroke 130 m/m injection plunger diameter 50,55,60 mm Dodpfjvfhryox Addjla casting volume (DIN 24480) 119, 163, 214 cm 2 volume cast pressure 380, 315, 265 kp/cm² casting area 236, 285, 340 cm 2 Traverse Stroke 150 m/m Generaloverhauled diecasting machine DAW80 GO with Datalogic Control for the used of zinc alloys Available upon aggreement

Condition: excellent (used), Sat B2599A Drawer oven 130 °C If very different products or product parts with equally different annealing times are to be treated independently of each other in the smallest possible space, drawer ovens are the smartest ergonomic solution. Oven data Manufacturer: Sat Model: B 2599 A Type: 1000T Type: Drawer oven Outer dimensions of the furnace width with control cabinet: 2500 mm depth: 1700 mm Height: 2250 mm Usable volume in each drawer width: 1200 mm Dljdpfx Asim Ik Ssddea depth: 850 mm Height: 170 mm (measured 178 mm) Maximum working temperature: 130 °C Temperature homogeneity in the usable volume, when stabilized : +/-3°C at 80°C Frame : The basic structure consists of a non-alloyed steel beam structure, on which the external lighting made of non-alloyed steel is painted in RAL 1013 (pearl white). The furnace inner casing is made of aluminized steel sheet. Insulation between the two furnace housings (inner/outer housing) is provided by 120 mm rock wool. Floor: Same as the furnace walls, with 120 mm thick thermal insulation. Height (from factory floor to I. drawer): 800 mm +/100 mm adjustable by the furnace feet. Openings: 3 drawers, height 250 mm, for a usable load of 120 mm height. Maintenance doors : 2-leaf maintenance door on the back of the oven. Secured by screws. This door allows complete access to the inside of the furnace. Parts handling: The handling of the parts is ensured by 3 drawers (one above the other). Height between each drawer : 250 mm Usable height per drawer : 170 mm, with almost 10 mm reserve. The drawers are smooth and equipped with a locking piece at the bottom of the drawer to reduce heat loss when opening. Each drawer has a useful load capacity of 120 Kg with load distribution over the entire surface. Load peaks up to 240 Kg can be supported. The drawer seals are made of silicone. The locks of each drawer are ensured by electromagnets and controlled by the Siemens system. Timing of the minimum preheating time with a timer per drawer (located in the electrical cabinet). Timing of the maximum preheating time with one timer per drawer (located in the electrical cabinet). One temperature indicator is provided per drawer. These indicators will be located on the front of the furnace, to the left of the drawers. More industrial furnaces in other sizes - new and used - you can find in our store! International shipping costs on request!

Year of construction: 2013, operating hours: 390 h, condition: good (used), Vacuum chamber with control and pump unit. Diameter inside: 1000 mm Length inside: 1600mm Vacuum pump: 1000m³/h Checked leakage rate! Different vacuum chambers available as well as different constellations with pumps possible. For further information please send us an inquiry! Dlodpfx Adobr Dc Aedsa

Year of construction: 2019, condition: like new (used), Chamber oven EHS (Netherlands) temperature: 50 - 150 °C 6 chambers of 1400x800x2400 mm Dedpfx Adswun Ifedjla 12 electric heaters, each 3 kW 400V / 63A loading up to 1400 kg per chamber

Condition: used, Year of construction: 1999, closing pressure 3150 kN clamping plate 900x900 mm distance between columns 550x550 mm weight of the machine ca. 15,5 t lock stroke 500 mm capacity of ejector 159 kN Dljdovfhrtjpfx Addsa ejector stroke 120 mm height of form 300-700 mm column diameter 110 mm casting capacity 158 kN casting plunger stroke 250 mm injection plunger diameter 70,80,90,100 mm casting volume (DIN 24480) 514,791,1105,1455 cm 2 volume cast pressure 410,316,249,201 kp/cm² casting area 768,996,1265,1597 cm 2 Traverse Stroke 300 mm Used Die Casting machine DAM 315 S with Datacontrol for the use of magnesium alloys. Available from used machine stock. The machine is equipped with an electric furnace from Rauch Typ MMO 315E. Without sprayer. Recommendation from the manufacturer is some repair / general overhaul in the overhaul plant. It can be carried out in the scope of agreement.

Condition: excellent (used), Glasbeek finish   Gas Poederwand chamber oven  Maximum temperature 250°C Electrical connection 8 kW 51 KW 3x400V Year 2003 Approx. internal dimensions W120cm x D300cm x H139cm Dledpfxed Szzgj Addea with loading trolley (L280 x W102 cm) Approx. external dimensions LxWxH approx. 380x220x305 cm

Condition: good (used), Vacuum chamber of the glass Exikator glass The glass cylinder and glass lid can reactions as well as behavior of various liquid substances / products visible are tested under vacuum. Easy handling and operation Plenty of connectivity options Volume of 13.9 litres Good and simple way of cleaning Weight 14.5 KG Areas of application: Laboratories for reaction tests under vacuum Production E.g. drying of components Universities E.g. for screenings Research for example hardening by plastic Vacuum chamber of the glass Exikator glass Any accessories/variants: Development Different sizes of Glass vacuum chamber available Dlsdpfodcpapex Addsa A wide variety of pumps available for vacuum generation Heating plate Vacuum electrical feedthroughs Adaptations Vacuum hoses Data to the glass Chamber Made of safety glass VITON seal Easy removable glass lid Hinged plastic feet for stability Leak rate of small 0.1 L / s Aussenmmasse: Ø = 320 mm x 420 mm Internal dimensions: Ø = 230 mm x 330 mm 12 x 1/4 inch connection options

Condition: new, Year of construction: 2024, closing pressure 240 kN clamping plate 380x380 mm distance between columns 250x250 mm weight of the machine ca. 3,0 t lock stroke 180 mm capacity of ejector 28 kN ejector stroke 50 mm height of form 120-300 mm column diameter 45 mm casting capacity 43 kN casting plunger stroke 85 m/m injection plunger diameter 36,40,45 mm casting volume (DIN 24480) 47,63,87 cm ³ volume cast pressure 420,340,270 da/cm² casting area 56,70,88 cm 2 Traverse Stroke 150 m/m Equipment of the machine 1.0.2Cover for drop through area at the subframe with scale/chute 1.1.0Motorized guard in casting direction left 1.4.0Machine positioning mounting pads 1.5.4Machine interior illumination 1.11.0Convenience package energy efficiency 2.0.1Ejector assistance packages Dlodpfor Hwfxex Addea 2.6.4Machine assistance system SensiLock 3.0.1Casting assistance package Basic 3.2.9 EcoMelTec multi-chamber furnace with pump (surcharge) 3.4.4Prefilling process 3.4.5Simplified piston removal 3.4.6Piston stop during return stroke 3.5.2Electric nozzle and gooseneck heating (extended version) 3.5.3 Plug-in connections for electric nozzle and gooseneck heating 4.5.0Shut-off facility for hydraulic locking and injection unit 4.6.1.2Integrated water circuit 2+4 circuits 5.1.0Machine control DATADIALOG - Realtime Control (RC) 5.1.5Maintenance plus package 5.6.0Special cable lengths 6.1.3.1Digital interface for Non-FRECH extractor (Dispo 10) 6.1.4Serial interface for 4 heating-cooling circuits ROBAMAT 3.1 6.1.5 Interface for Vacuum unit 6.3.1.1Hanging operating desk with monitor 6.5.2Service Package RSD with Switch for each additional machine 7.2.1.2Spraymotion 411 E with servo drive 7.2.10Extended spraying program for spraymotion 7.3.1Lubricant container TD 20 7.4.0.1Spray rail CR 155 7.12.3 Low noise chute

Condition: good (used), Year of construction: 1992, Glasbeek Finish Gas Chamber Furnace Type G.11.01, 250 ° C Glasbeek finish Gas chamber furnace Type G.11.01 Maximum temperature 250 ° C Approximate inside dimensions (B1400mm x D1900mm x H1985mm) 6m³ Bogie dimensions approx. (1000 mm x 1800 mm x H250 mm) Year 1992 3 x 380 volts 41 kW Dlsdpfx Aed Srlrsddoa More articles - new and used - can be found in our shop! International shipping costs on request!

Condition: new, Year of construction: 2024, closing pressure 900 kN clamping plate 540x540 mm distance between columns 350x350 mm weight of the machine ca. 5,3 t lock stroke 280 mm capacity of ejector 61 kN ejector stroke 70 mm height of form 160-400 mm column diameter 65 mm casting capacity 78 kN Dlodpfsr Hwf Aox Addsa casting plunger stroke 130 m/m injection plunger diameter 50,55,60 mm casting volume (DIN 24480) 147, 191, 241 cm 2 volume cast pressure 396, 327, 275 da/cm² casting area 226, 274, 326 cm 2 Traverse Stroke 220 m/m Equipment of the machine 1.0.2Cover for drop through area at the subframe with scale/chute 1.1.0Motorized guard in casting direction left 1.4.0Machine positioning mounting pads 1.5.4Machine interior illumination 1.11.0Convenience package energy efficiency 2.0.1Ejector assistance packages 2.6.4Machine assistance system SensiLock 2.8.0Hydraulic adjustment of locking unit for shot positioning 3.0.1Casting assistance package Basic 3.2.9 EcoMelTec multi-chamber furnace with pump (surcharge) 3.4.4Prefilling process 3.4.5Simplified piston removal 3.4.6Piston stop during return stroke 3.5.2Electric nozzle and gooseneck heating (extended version) 3.5.3 Plug-in connections for electric nozzle and gooseneck heating 4.5.0Shut-off facility for hydraulic locking and injection unit 4.6.1.3Integrated water circuit 2+6 circuits 5.1.0Machine control DATADIALOG - Realtime Control (RC) 5.1.5Maintenance plus package 5.6.1Special cable lengths 6.1.3.1Digital interface for Non-FRECH extractor (Dispo 10) 6.1.4Serial interface for 4 heating-cooling circuits ROBAMAT 3.1 6.1.5 Interface for Vacuum unit 6.3.1.1Hanging operating desk with monitor 6.5.2Service Package RSD with Switch for each additional machine 7.2.2.2Spraymotion 611 E with servo drive, 1-circuit 7.2.10Extended spraying program for spraymotion 7.3.1Lubricant container TD 20 7.4.0.3Spray rail CR 275

Condition: good (used), Glasbeek Finish Gas Chamber Furnace Type 003.05 Glasbeek finish Gas chamber furnace Dedpfxsd Spx Dj Addola Type 003.05 With loading trolley Maximum temperature 200 ° C Approximate inside dimensions (B1900mm x T2950mm x H1800mm) More articles - new and used - can be found in our shop! International shipping costs on request!

Condition: excellent (used), Carbolite CWF 11/5 Chamber Furnace 1100 °C Max Temp: 1100 °C With exhaust system and table Upward opening door keeps hot surface away from user Soft self-closing door (for 5, 13, 21 & 23 liter models) Djdopygpfepfx Addola Standard start delay and process timer function Durable aluminum oxide support plates for the heating elements; sturdy door surround and base plate High quality fiber insulation with low thermal mass Powerful heating elements on both sides provide very good temperature homogeneity Easy access to elements and controls simplify maintenance and servicing Further articles new and used - you will find in our store! International shipping costs on request!

Condition: like new (used), functionality: fully functional, power: 1.5 kW (2.04 HP), For sale: AUMA SAR 07.5 electric valve actuators complete with AC 01.1 integrated controllers and VDG 63.40/50 gearboxes. These are premium multi-turn/part-turn actuators widely used in energy, biomass, district heating, wastewater, industrial automation, and power generation. Key Features 30–60 Nm torque, 32 rpm 1.5 kW motor, 400V 3-phase IP67, –25…+60 °C Local/Remote operation via AC01.1 Manual override (Handmanöver) Integrated display and safety interlocks VDG63 gear reducers included Units are in excellent working condition, from an operating energy facility, with clean housings and dry electrical connections. Actuator type Electric actuator for valves/dampers Torque range 30–60 Nm Speed 32 rpm Motor power 1.5 kW Voltage 3×400 V, 50 Hz Protection class IP67 Temperature range –25 … +60 °C Dlsdpfx Adjxy Rcyodsa Control interface Integrated AC 01.1 (Local/Remote/Off selector) Manual override Full Handmanöver with red decoupling lever Gear unit VDG 63.40/50 (AUMA worm gearbox) Gear unit rating ~ 4.7 A, mechanical reduction for high-torque valves Identification Labels: 7Gi-206, 7Gi-209, 7Gi-208 etc. Ingress protection Outdoor-capable, dust-proof, splash-proof

Condition: new, Year of construction: 2025, PROFESSIONAL WIRE FEEDER WITH AC SERVO MOTOR FOR LASER AND TIG WELDING Citronix professional wire feeder with servo technology - means that it uses ac servo motor for motor drive, which enables it not only to feed wire very precisely even when the speed is low, but also the ability to set the length in „mm“ for wire withdrawal, and also, after the material is cooled down, we can push it again (the smallest step 0,1 mm) This is a very important feat with laser welding, and this working method is an advantage compared to wire feeders made in the Far East, since with those machines the function of withdrawal and pushing the wire is set on time, and the consequence of this method is that the tip of the welding wire never comes back to the place where the withdrawal started. We made the Citronix wire feeder in a way that it can control not only the wire feeding process, but it can also manage (turn on and off) both the laser source and the gas magnetic valve. This is another significant difference and advantage compared to other manufacturers, because usually there is no spot welding technology in laser welding machines, so if someone wants to weld sheets in the spot welding technology, he can set the spot time and the wire feeder will control the laser source. Wire feeder has 4 operation technologies: 1. continuous welding with wire feeding; 2. continuous welding without wire feeding; 3. spot welding without wire feeding; Wire feeder has 200 memory cells – locations, if the parameters are set, they can be saved on the memory location and we can name them in any number or text combination, in order to make use easier. We also developed a foot pedal, which can be attached to the wire feeder and regulate the feeding speed. It works like a gas pedal in motor vehicles. If, for example, we set the maximal speed 10 meter per minute on the display, and press the pedal all the way, the speed will be 10 meter per minute (or the speed we set), if pressed only half way, the speed will be half of the set speed. This feat can be used if the operator remains in one place, for example if he is sitting. If this pedal isn't necessary, the wire feeder can be attached to the system in a manner to turn on-off the welding process from the button on the torch. This pedal is optional, and in case you want to order it, it is additionally charged 400 EUR. Dodpfx Adsmk S Slsdela Take a look at the monitor images and see the functions – parameters that can be adjusted. Citronix wire feeder can be used not only for laser welding, but also for the TIG welding, we made a filter to prevent HF-spark. Wire thickness it can push is from 0,8-2,4 mm. At this moment, we have a menu in English, German, Hungarian, and Serbian language.

Condition: good (used), overall weight: 180 kg, total height: 1,650 mm, input voltage: 400 V, type of input current: three-phase, input frequency: 50 Hz, BB Stromberg AC Drive SAFUI 400F415 ABB SAFUI-400F-415 DISCONTINUED BY MANUFACTURER AC DRIVE Dedpfexlr Arox Addjla 380/415VAC 50/60HZ 315/400KVA height:165 length:530 width:450 weight: ca170 DISCONTINUED BY MANUFACTURER

Condition: used, tank capacity: 39,000 l, GENERAL INFORMATION Equipment: butterfly valve, crane lugs Design: vertical Dlodpoxqdb Refx Addja Remarks: All 3 chambers with separate manway & outlet (butterfly valve) External diameter: 3,000 mm Total height: 7,000 mm Base design: height-adjustable feet Location: outdoor storage Nameplate: Volume: 39,000 litres Product-contact material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 5,250 mm TANK Bottom: conical bottom Number of feet: 6 units EQUIPMENT Manway/Hatch: in cylinder Outlet: present Note: light residues

Condition: refurbished (used), AC Horn Single Lane Collator, Model# ACHPC005, Serial# 20227A Dljdpfx Adjt Ty E Rjdja We have six units in stock.

Condition: good (used), Year of construction: 2017, functionality: fully functional, LINEAR PET BLOWING MACHINE SET with auxiliary equipment AC ARCOR - multiBlow2 - 2017 Speed: 1,5L - 6000 Cavities: 4 Formats: 0,1 - 3,0L AUXILARY EQUIP 1. Chiller - M.T.A S.p.A - TAE EVO 051 Dlsdpfx Ajquuvreddja 2. LOW Pressure compressor - SHAMAL 45kw 3. High Pressure compressor - KAESER Booster N 753 - G 13 bar / 40 bar" 4. Air Dryer 5. Receiver tank - Low pressure - MAX 16Bar 6. Receiver tank - High pressure - MAX 45Bar

Condition: new, functionality: fully functional, Year of construction: 2024, pressing force: 25 t, distance between stands: 640 mm, stroke length: 150 mm, Pressure, tn: 25 Stroke: 150 mm. Distance between frames: 640 mm. Djdoxt Npfspfx Addela Year: 2024 Country of origin: Denmark. Size (L x W x H): 300 x 885 x 1620 mm. Weight: 130 Kg. Cylinder can be moved down by pneumatic pedal. 2 machines in stock.

Condition: defective spare-parts repository (used), Spare parts carrier (engine, axles and gearbox in order) or interesting project, such as conservatory / food truck. Dedouf Uupspfx Addjla

Condition: used, functionality: fully functional, Year of construction: 2010, Equipment: pallet forks, Offered here are seven hydraulic power units from the manufacturers AC-Motoren GmbH and ADDA Antriebstechnik, built in 2010. The machines are in used condition and are currently not in operation. From a safety perspective, the machines meet the latest standards. All units are operational and ready for use. Jacket compartment: Test pressure (PT) bar: 23 Permissible operating temperature TS (°C): min. +20 / max. +150 Permissible operating pressure PS (bar): min. 0.5 / max. 16 Volume (l): 4 Tube compartment: Test pressure (PT) bar: 23 Permissible operating temperature TS (°C): min. 4 / max. 90 Permissible operating pressure PS (bar): min. 0.5 / max. 16 Volume (l): 5 Dedpfx Adjxdi I Nedsla An inspection of the machines can be arranged upon request and by appointment. If you have further questions, please do not hesitate to contact us.

Condition: used, machine/vehicle number: 1001, WP-UC 80 stainless steel bowl on stanchions for the UC 80 AC mixer Top condition Dljdpfsc Upuqjx Addea

Condition: excellent (used), Two-chamber stainless steel tank 66m3 (40 + 26 m3) DIMENSIONS: - Diameter: 3,245 mm - Height: 13,053 mm Year of manufacture 2006 Weight: 4,680 kg Upper part: 40° slope - Lower part: 2% slope. DN 600 hatch with hinged cover at the top. stainless steel pressure-vacuum valve At the bottom, a DN400 hatch with a hinged cover a stainless steel pressure-vacuum valve Upper tank heating: 6 coils, exchange surface 6.95 m2, PS 2 bar Dlsdpfjvlpctsx Addja Above 2 coils, exchange surface 2.33 m2, PS 2 bar A device for moving grounds, test valve Lower tank heating: 4 coils, exchange surface 4.64 m2, PS 2 bar. Above: 2 coils, exchange surface 2.33 m2, PS 2 bar. Liquid level gauge 555x432 rectangular hatch DN70 ball valve The tanks were used in the wine industry. The tanks have a technical drawing. The tanks are dismantled and ready for delivery.

Condition: used, Electric Motor AC Motoren GmbH Type AOM 225S-4 Dsdpfx Adedcb U Todsla 400/690V 50Hz 37 kW 1475 RPM 440 60Hz 44,4 kW 1770 RPM 228A IP55

Condition: used, machine/vehicle number: 07040478, Electric Motor AC Motoren GmbH Type AH 315 MA-4 400/690V 50Hz 132 kW 1485 RPM 440 60Hz 158 kW 1782 RPM 228A Dsdpsc Sqvlefx Addola IP55 Complete with cooler make Wistro 380-500V 50/60Hz 255/370W