Used Ac Chamber for sale (12,452)

Condition: used, Weiss   Weiss Technik TS 60 Thermal Shock Test Chamber / 60 L, –71…+220 °C Water-cooled   Item description:   For sale is a Weiss Technik TS 60 thermal shock test chamber. The chamber is ideally suited for rapid temperature cycling tests (e.g., according to IEC, MIL-STD, JEDEC) and has been well maintained.   Volume & Internal Dimensions:   Test volume: 60 liters   Internal dimensions of basket / test chamber (W × D × H): approx. 380 × 430 × 370 mm External dimensions (W × D × H): 895 × 1970 × 1895 mm   Temperature ranges & cycling   Hot chamber +50 °C to +220 °C Cold chamber −72 °C to +70 °C   Transfer time (basket between both zones): < 10 seconds   Heating rate / heating speed up to 17 °C/min Cooling rate / cooling speed up to 3.7 °C/min   In single mode (cold zone only), heating rate: approx. 3.2 °C/min   Temperature deviation & homogeneity   Temporal deviation (temperature control over time): ± 0.3 to ± 1.0 °C   Load / payload & lifting system   Basket / lifting system load: 20 kg maximum load capacity Transfer basket secured by protective grilles on all sides   Other features & equipment   Noise level: approx. 58 dB(A) during operation Control: Touchscreen, RS-232 / USB / Ethernet interfaces   Electrical connection: 3/N/PE AC 400 V ±10% 50 Hz Rated power approx. 8.5 kW Rated current approx. 25 A Fuse on customer's side 32 A Refrigerant R-404A / R-23   Weight: 800 kg   For your safety as a buyer, please note the following:   The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leakage test with certificate Bwsdpezii A Refx Afgjw 4. After successful inspection, the chambers will be subjected to a documented test run.   Condition: used   Scope of delivery: (See image)   (Changes and errors in the technical data are subject to change!)   We will be happy to answer any further questions you may have by telephone.

Condition: used, Vötsch Type: VTS 7018-5 Water-cooled temperature test chamber System converted to R-452A Temperature range: -70°C to +180°C Temperature deviation (temporal): ±0.1 to ±0.5 K Temperature deviation (spatial): ±0.5 to ±2.0 K Temperature change rate (cooling): 7.5 K/min Temperature change rate (heating): 7.5 K/min Thermal compensation at +20°C: 3000 W Thermal compensation at -20°C: 3000 W Test chamber dimensions: Width 580 mm, Depth 450 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1280 mm, Height 1575 mm Test chamber volume: 190 liters Rated voltage: 3/N/PE AC, 400V ±10 %, 50Hz Bodpfeziixxex Afgoww Rated power: 100 kW, Rated current: 21 A Fuse, on customer side: 32 A, slow-blow Sound level at 1m distance (free-field measurement): < 69dB (A) Side feed-through: 50 cm / 125 cm Chamber is water-cooled Refrigerant: R-452A and R23 Weight: approx. 460 kg For your safety as a buyer, please note the following: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerants 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, Weiss Type: SC/KWT 450 Salt spray chamber Technical data: Test chamber volume: 450 liters Max. load: 100 kg Brine reservoir: 180 liters External dimensions: Height 920 mm, Width 1930 mm, Depth 800 mm Bwjdpfx Aeziiy Nofgsw Test chamber dimensions: Height 740 mm, Width 850 mm, Depth 570 mm Application areas: Corrosion tests: Salt spray test: Ambient temperature up to +50°C Condensation water test: Ambient temperature up to +45°C Humidifier: +75°C Temperature constancy The time-related temperature deviation is ± K. Voltage: 1/N/PE AC 230V ±10% 50Hz Rated power: 2.0 kW Rated current: 8.7 A Combination: Salt spray test SS: DIN 50021 Condensation water test KFW: DIN 50017 Normal climate (ventilation): DIN 50014 Weight: 180 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: used, Vötsch   Type: VC 7018   Vötsch Climate Testing Chamber VC 7018, Water-Cooled   Control Panel: “Touch Panel” All control and operating commands can be initiated by simply touching the function symbols on the “Touch Panel” control panel.   Adjustable Feet To compensate for uneven floors and to ensure sufficient ventilation of the machine, the testing chamber is equipped with adjustable feet.   Feedthroughs The testing chamber is equipped with feedthroughs on the right and left sides. These allow measuring cables and testing equipment to be routed into the testing chamber.   Feedthroughs installed as standard: R1: 125 mm L1: 50 mm   Testing chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Housing dimensions: Width 870 mm x Depth 1280 mm x Height 1745 mm   Performance data for temperature tests:   Temperature range: -70°C to +180°C Temporal: ±0.1 to ±0.5 K Spatial: ±0.5 to ±2.0 K   Temperature change rate according to IEC 60068-3-5 Heating: 4 K/min. Cooling: 2.3 K/min.   Performance data for climate tests:   Temperature range: -10°C to +95°C Humidity range: 10% to 98% RH   Temporal temperature deviation in the center of the usable space: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1.0 K   Temperature gradient: 1 to 2 K Temporal humidity deviation in the center of the usable space: ±1 to ±3 % RH   Electrical connection:   Rated voltage: 3/N/PE AC 400V ±10 50Hz Rated power: 5.9 kW Rated current: 12.0 A Connection cable: 3.5 m Fuse: 16 A, slow-blow, provided on site   Refrigerant: R-404A and R-23   Testing chamber volume: approx. 190 liters   Weight: approx. 460 kg net   For your safety as a buyer, please note the following information! Bwjdszh Huhopfx Afgjw   The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run.   Condition: used   Scope of delivery: (See picture)   (Changes and errors in the technical data and specifications are subject to change!)   We will gladly answer any further questions you may have over the phone.

Condition: used, WEISS TECHNIK Salt Spray Test Chamber / Corrosion Test Chamber SC 1000 Professional salt spray test chamber for corrosion, salt spray, and condensation tests For sale is a used salt spray test chamber from the manufacturer Weiss Umwelttechnik GmbH. The system is suitable for professional corrosion tests, salt spray tests, and condensation tests in laboratories, the automotive industry, research, and quality assurance. Equipped with a color touch panel, Ethernet interface, and a test chamber volume of approximately 950 liters. Technical data: Manufacturer: Weiss Umwelttechnik GmbH Model: SC 1000 Year of manufacture: 2015 Test chamber volume: approx. 950 liters Supply: 1/N/PE AC 230 V ±10 % / 50 Hz Rated power: 2.6 kW Rated current: 11.3 A Compressed air: 4–10 bar (max. 10 bar) Deionized water: 3–5 bar Control: Programmable color touch control Ethernet network interface RS232 interface Dimensions: External dimensions (W × D × H): approx. 2,730 × 800 × 1,370 mm Test chamber dimensions (W × D × H): approx. 1,560 × 570 × 1,190 mm Test chamber volume: approx. 950 liters Weight: Tare weight (without brine): approx. 220 kg Equipment: 950-liter test chamber Color touch panel Ethernet interface RS232 interface Programmable control Salt spray testing Condensation testing Heated compressed air humidifier Integrated brine tank Compressed air connection Deionized water Exhaust connection Application areas: Corrosion testing Salt spray tests Condensation tests Material testing Coating testing Paint testing Automotive industry Quality assurance Testing laboratory Research and development Scope of supply: Weiss Technik SC 1000 Accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures. Bwsdpfszlgyrex Afgjw Normal signs of wear and tear due to age. The table shown in the photos and other items not explicitly mentioned are not included in the sale. Shipping by freight forwarder is possible. Subject to change, errors and prior sale. We would be happy to answer any further questions by telephone.

Condition: used, VÖTSCH Temperature Testing Chamber / Vibration Testing Chamber / ShakeEvent Vötsch ShakeEvent T/1200/70/5/V/S Temperature range: -70 °C to +180 °C Test chamber volume: approx. 1,150 liters / Year of construction: 2019 Water-cooled – Electrically adjustable test chamber height For sale is a used temperature testing chamber from the manufacturer Vötsch Industrietechnik GmbH / Weiss Technik, model ShakeEvent T/1200/70/5/V/S. The system was developed for demanding temperature tests and the combination with vibration and shock testing systems. Technical data: Manufacturer: Vötsch Industrietechnik GmbH / Weiss Technik Model: ShakeEvent T/1200/70/5/V/S Type of equipment: Temperature testing chamber / Vibration testing chamber Year of construction: 2019 Test chamber volume according to manufacturer's standard version: approx. 1,150 liters Version: water-cooled Adjustable test chamber height: electrically Country of manufacture: Germany Temperature data: Temperature range: -70 °C to +180 °C Temperature change rate, cooling, according to manufacturer: approx. 4.5 K/min Temperature change rate, heating, according to manufacturer: approx. 5.5 K/min Refrigerant circuit: Refrigerant 1: R449A Filling quantity: 6.50 kg GWP according to nameplate: 1,397 CO₂ equivalent: 9.08 t Max. low pressure: 19 bar g Max. high pressure: 25 bar g Refrigerant 2: R23 Filling quantity: 2.50 kg GWP according to nameplate: 14,800 CO₂ equivalent: 37.00 t Max. low pressure: 19 bar g Max. high pressure: 25 bar g Standby pressure: 12.5 bar g Electrical data: Mains connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 24 kW Rated current: 41 A Test chamber: Test chamber volume according to manufacturer: approx. 1,150 liters Internal dimensions (W × D × H): approx. 1,100 × 1,100 × 1,100 mm Electrically adjustable test chamber height Interior for temperature and stress testing Dimensions / Transport: External dimensions (W × D × H): approx. 1,525 × 3,210 × 2,150 mm Weight: approx. 1,600 kg The specified dimensions and weight are based on the manufacturer's table for the corresponding ShakeEvent T/1200/70/5/V standard version. Deviations in the existing /V/S version are possible and must be checked before transport. Equipment: Programmable touch panel control WEBSeason operating interface Temperature control Electrically adjustable test chamber height Water-cooled cooling system Multi-stage cooling system Test chamber with viewing window Test chamber lighting Side test specimen access Bwjdpfx Afe Aa Nufogsw Preparation for vibration and shock testing systems Temperature and status display Alarm and warning display Cooling water supply and return Overflow and condensate drain LAN communication interface Connection and supply components according to the images Application areas: Temperature testing Combined temperature and vibration testing Environmental simulation Environmental Stress Screening (ESS) Electronics and component testing Automotive testing Material testing Quality assurance Research and development Aging and stress tests Temperature cycling test Condition: Used Year of construction 2019 Optical condition according to the images Scope of delivery: 1 × Vötsch ShakeEvent T/1200/70/5/V/S temperature testing chamber Programmable touch panel Existing connection and supply components Accessories according to the images Shipping via freight forwarder possible upon agreement. Due to the dimensions and weight, loading and transport must be coordinated in advance. Subject to

Condition: used, Vötsch   Temperature Shock Chamber / 2-Chamber Shock Test System   Vötsch VT³ 7012 S2 Temperature Shock Chamber Warm chamber +50 °C to +220 °C / Cold chamber -80 °C to +70 °C 125 liter test chamber volume – Year of manufacture 2018 – water-cooled version   For sale is a used temperature shock chamber from the manufacturer Vötsch Industrietechnik GmbH.   The system is used for performing rapid and shock-like temperature changes and is particularly suitable for environmental simulation, Environmental Stress Screening (ESS), quality assurance, as well as stress and reliability tests of electronic components, assemblies, and other test specimens.   The VT³ 7012 S2 operates according to the 2-chamber principle with a warm and cold chamber. The test specimen is transported between the two temperature zones in a vertically moving test carriage and is thus subjected to rapid temperature changes.   Technical data:   Manufacturer: Vötsch Industrietechnik GmbH Type: VT³ 7012 S2 Device type: Temperature shock chamber / 2-chamber shock test system Year of manufacture: 2018 Made in Germany   Test chamber volume: 125 liters Number of chambers: 2 Temperature range warm chamber: +50 °C to +220 °C Temperature range cold chamber: -80 °C to +70 °C Bjdpfx Afszzazuogjww Max. test weight / test carriage load: 50 kg Refrigeration unit: water-cooled   Refrigerant 1: R449A Refrigerant quantity: 1.70 kg GWP: 1,397 CO₂ equivalent: 2.37 t Max. low pressure: 22.5 bar g Max. high pressure: 25 bar g   Refrigerant 2: R23 Refrigerant quantity: 1.27 kg GWP: 14,800 CO₂ equivalent: 18.80 t Max. low pressure: 22.5 bar g Max. high pressure: 25 bar g Operating pressure: 14 bar g   Mains connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 10 kW Rated current: 25 A   Test chamber dimensions (W × D × H): 470 × 650 × 410 mm External dimensions (W × D × H): 970 × 2,350 × 1,985 mm Required room height for operation: approx. 2,450 mm Weight: approx. 1000 kg   Equipment:   2-chamber temperature shock system Vertically moving test carriage Programmable touch panel control CONTROLPAD for status display Temperature control Test chamber lighting Observation window Pipe connection Water-cooled refrigeration unit Automated and programmable defrost cycles Operating hour counter Cycle counter / remaining runtime display USB and Ethernet interfaces   Areas of application:   Temperature shock testing Environmental Stress Screening (ESS) Environmental simulation Electronics and component testing Assembly testing Material testing Quality assurance Research and development Reliability testing Lifetime and stress tests   Condition:   Used Optical condition as shown in the pictures   Scope of delivery:   1x Vötsch VT³ 7012 S2 Temperature shock chamber Touch panel control Equipment and accessories as shown in the pictures   Important note: For the safety of our customers, the following work will be carried out on the offered testing and climate systems in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if necessary 3. Leak test with certificate 4. Documented test run after successful inspection   Shipping by freight forwarder is possible. Subject to change, errors and prior sale.   We will be happy to answer any further questions by telephone.

Condition: used, Weiss Type: WK1-1000/70 Weiss Climate Test Chamber, Water-Cooled (Refrigerant converted to R-452A) Control Panel “Touch Panel” All control and operating commands can be initiated on the “Touch Panel” control panel by simply touching the function symbols. Feedthroughs The test chamber is equipped with feedthroughs on the right and left sides. These allow measurement cables and testing equipment to be placed in the test chamber. Feedthroughs: 1 feedthrough, ∅ 125 mm, installed on the right 1 feedthrough, ∅ 50 mm, installed on the left Volume: 990 liters Test chamber dimensions: Test chamber: Width 1100 mm, Depth 950 mm, Height 950 mm Housing: Width 1385 mm, Depth 1850 mm, Height 1980 mm Data for temperature tests: Minimum temperature: -70 °C Maximum temperature: +180 °C Temperature deviation, temporal: ± 0.1 to ± 0.5 K Temperature homogeneity, spatial: ± 0.5 to ± 2 K Temperature change rate, heating: 4 K/min Temperature change rate, cooling: 2.5 K/min Max. heat compensation: 2750 W Data for climate tests: Temperature range: +10°C to +95°C Humidity range: 10 to 98% RH Temperature deviation, temporal: ± 0.1 to ± 0.3 K Temperature homogeneity, spatial: ± 0.5 to ± 1 K Humidity deviation, temporal: ± 1 to ± 3% RH Data for operation: Bwjdpfszgbtpox Afgew Nominal voltage: 3/N/PE AC 400V ±10% 50Hz Nominal current: 29A, Nominal power: 19.8 kW Refrigerant: R-452A / R23 Weight: approx. 910 kg For your safety as a buyer, here is the following information: The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data and information are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, Weiss Technik Salt spray chamber / corrosion test cabinet Weiss Technik SaltEvent SC 1000 Corrosion test equipment / salt spray test chamber For sale is a used Weiss Technik SaltEvent SC 1000 salt spray chamber. The device is suitable for corrosion tests, salt spray tests, material testing, surface testing, quality assurance, as well as research and development. Technical data Manufacturer: Weiss Technik GmbH Type: SaltEvent SC 1000 Device type: Salt spray chamber / corrosion test equipment Year of manufacture: 2019 Test chamber size: Size 1000 liters Rated voltage: 1/N/PE AC 230 V ±10 % / 50 Hz Rated power: 2.6 kW Rated current: 11.3 A Customer-side fuse: 16 A slow-blow Weight: approx. 370 kg Overall dimensions according to layout drawing: approx. 2910 × 900 × 960 mm Max. test chamber load: 150 kg Floor grid load: 150 kg Insertion rods: 8 kg per rod Shelf for machine part covers: 5 kg Temperature range salt spray test: Ambient temperature +5 K to +50 °C Temperature range condensation test: Ambient temperature +5 K to +42 °C Temperature compressed air humidifier: Ambient temperature +5 K to +70 °C Temperature stability over time: ±1 K Salt solution consumption during salt spray test: approx. 0.5 to 1.5 l/h Equipment Bwodpfjzg Er Ajx Afgow S!MPAC control system WEBSeason / color control panel Touch operating panel Test chamber hood Storage tank Control cabinet Floor grid / test chamber grid Compressed air humidifier Hood locking Temperature monitoring Interface Documentation as shown in the pictures Connections / media supply Power connection: 230 V / 50 Hz Compressed air connection available Connection for demineralized water available Exhaust connection available Water drain / condensate drain available Application areas Salt spray test Corrosion test Condensation test Material testing Surface testing Coating testing Automotive Quality assurance Research and development Condition Used Optical condition as shown in the pictures. Scope of supply 1x Weiss Technik SaltEvent SC 1000 salt spray chamber Storage tank Accessories as shown in the pictures Documentation as shown in the pictures The table shown in the photos and any other items not explicitly mentioned are not included in the sale. Inspection possible by appointment. Loading with a forklift is available. Shipping or freight forwarding is possible. Subject to change, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, Vötsch Type: VTS 7011-5 Heraeus Vötsch temperature control chamber, water-cooled Test chamber volume: 110 liters Bwsdpfxezg Tpce Afgew Test chamber dimensions: Width 560 mm, Depth 350 mm, Height 630 mm External dimensions: Width 850 mm, Depth 1030 mm, Height 1640 mm Temperature range: -70°C to +180°C Temporal temperature deviation: ± 0.3 to 1 K Spatial temperature deviation: ± 0.5 to ± 2 K Temperature change rate (cooling): 6 K/min Temperature change rate (heating): 10 K/min Refrigerant: R-404A / R 23 Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 7.5 kW Rated current: 13 A Weight: 360 kg For your safety as a buyer, please note the following information: The following steps are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, Heraeus Vötsch Type: VTS 7034-5 Heraeus Vötsch Temperature Test Chamber, Water-Cooled Temperature range: -70°C to +180°C Temperature deviation (temporal): ± 0.1 to ± 0.5 K Bwjdpfx Afszg Tpijgjw Temperature deviation (spatial): ± 0.5 to ± 2.0 K Temperature change rate (cooling): 5.0 K/min Temperature change rate (heating): 6.5 K/min Thermal compensation at +20°C: 3000 W Thermal compensation at -20°C: 3000 W Test chamber dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Test chamber volume: 335 liters Rated voltage: 3/N/PE AC, 400V ±10%, 50Hz Rated power: 10 kW, Rated current: 21 A Sound level at 1m distance (free-field measurement): < 69dB (A) Side access port: 5.5 cm / 12.5 cm The chamber is water-cooled. Refrigerant: R-404A and R23 Weight: approx. 570 kg For your safety as a buyer, please note the following information: The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run, which is monitored with calibrated equipment. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, Heraeus Vötsch Type: VTS 7034-5 Heraeus Vötsch Temperature Test Chamber, Water-Cooled Temperature range: -70°C to +180°C Bwsdpfezg Tp Nex Afgow Temperature deviation (temporal): ± 0.1 to ± 0.5 K Temperature deviation (spatial): ± 0.5 to ± 2.0 K Temperature change rate (cooling): 5.0 K/min Temperature change rate (heating): 6.5 K/min Thermal compensation at +20°C: 3000 W Thermal compensation at -20°C: 3000 W Test chamber dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Test chamber volume: 335 liters Rated voltage: 3/N/PE AC, 400V ±10%, 50Hz Rated power: 10 kW, Rated current: 21 A Sound level at 1m distance (free-field measurement): < 69dB (A) Side access port: 5.5 cm / 12.5 cm The chamber is water-cooled. Refrigerant: R-404A and R23 Weight: approx. 570 kg For your safety as a buyer, please note the following information: The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run, which is monitored with calibrated equipment. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, Weiss Type: SC/KWT 450 Salt spray chamber Technical data: Test chamber volume: 450 liters Max. load: 100 kg Brine reservoir: 180 liters External dimensions: Height 920 mm, Width 1930 mm, Depth 800 mm Test chamber dimensions: Height 740 mm, Width 850 mm, Depth 570 mm Areas of application: Corrosion tests: Salt spray test: Ambient temperature up to +50°C Condensation water test: Ambient temperature up to +45°C Humidifier: +75°C Temperature stability The time-related temperature deviation is ± K. Voltage: 1/N/PE AC 230V ±10% 50Hz Rated power: 2.0 kW Rated current: 8.5 A Combination: Salt spray test SS: DIN 50021 Condensation water test KFW: DIN 50017 Normal climate (ventilation): DIN 50014 Bjdpfjzg Tn Esx Afgjww Weight: 180 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, Vötsch Type: VCS 7034-5 Water-cooled climate testing chamber Vötsch VCS 7034-5 Test chamber volume: 335 liters Performance for temperature tests Temperature range: -70 to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature gradient: 1 to 4 Rate of change: Cooling: 6.7 K/min Bjdozg Twgspfx Afgsww Heating: 6.8 K/min Heat compensation at +20°C: 3000 W / at -20°C: 3000 W Temperature calibration values: +23°C and +80°C Performance for climate tests Temperature range: +10 to +95°C Temporal temperature deviation: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Humidity range: 10 to 98% Temporal humidity deviation: ±1 to ±3% Dew point range: -3 to +94°C Heat compensation: 400 W Climate calibration values: +23°C / 50% RH and +95°C / 50% RH Test chamber dimensions: Width 580mm, Depth 765mm, Height 750mm External dimensions: Width 870mm, Depth 1595mm, Height 1775mm Electrical connection: 3/N/PE AC, 400 V ±10%, 50 Hz Rated power: 10 kW Rated current: 21 A Sound pressure level: 64 dB(A) Cooling water consumption: 1.4 m³/h Refrigerant: R-404A / R-23 For your safety as a buyer, please note the following information! The following steps are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, Vötsch Type: VCS 7034-5 Water-cooled climate testing chamber Vötsch VCS 7034-5 Test chamber volume: 335 liters Performance for temperature tests Temperature range: -70 to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature gradient: 1 to 4 Rate of change: Cooling: 6.7 K/min Heating: 6.8 K/min Heat compensation at +20°C: 3000 W / at -20°C: 3000 W Temperature calibration values: +23°C and +80°C Performance for climate tests Temperature range: +10 to +95°C Temporal temperature deviation: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Bwsdpfszg Tx Rox Afgew Humidity range: 10 to 98% Temporal humidity deviation: ±1 to ±3% Dew point range: -3 to +94°C Heat compensation: 400 W Climate calibration values: +23°C / 50% RH and +95°C / 50% RH Test chamber dimensions: Width 580mm, Depth 765mm, Height 750mm External dimensions: Width 870mm, Depth 1595mm, Height 1775mm Electrical connection: 3/N/PE AC, 400 V ±10%, 50 Hz Rated power: 10 kW Rated current: 21 A Sound pressure level: 64 dB(A) Cooling water consumption: 1.4 m³/h Refrigerant: R-404A / R-23 For your safety as a buyer, please note the following information! The following steps are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, Vötsch Type: VTS³ 7027-25 Heraeus Vötsch Temperature Test Chamber, Water-Cooled Performance Data: With a temperature change rate of 25 K/min Test chamber dimensions: Height 750 mm, Width 580 mm, Depth 615 mm External dimensions: Height 1775 mm, Width 780 mm, Depth 1895 mm Temperature range: -72°C to +180°C Temperature deviation (temporal): ± 0.1 to ± 0.5 Temperature homogeneity (spatial): ± 0.5 to ± 2.0 Temperature change rate (cooling): 25 K/min Temperature change rate (heating): 25 K/min Heat compensation at -20 °C: 8000 W Heat compensation at +20 °C: 8000 W Test volume: 270 liters 2x side feedthroughs, Ø 125 cm 1x side feedthrough, Ø 50 cm Chamber is water-cooled Test chamber lighting: LED strip 24 V, 6.8 W / 2x halogen bulb 24 V, 50 W Electrical connection: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 26 kW Rated current: 44 A Bwodpfszg Eygsx Afgew Refrigerant: R-452A and R-23 Weight: approx. 980 kg For your safety as a buyer, please note the following information: The following steps are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerants 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, Vötschtechnik Climate test chamber / Temperature test chamber Vötschtechnik ClimeEvent C/340/70/5 Temperature and climate test chamber, water-cooled For sale is a used climate test chamber from Vötschtechnik GmbH. The test chamber is suitable for temperature and climate tests, environmental simulation, material testing, quality assurance, as well as development and stress tests. Technical data Manufacturer: Vötschtechnik GmbH Type: ClimeEvent C/340/70/5 Device type: Climate test chamber / Temperature test chamber Year of construction: 2018 Test chamber volume: approx. 340 liters Weight: approx. 650 kg External dimensions (H x W x D): approx. 1830 x 900 x 1890 mm Internal dimensions (H x W x D): approx. 750 x 580 x 765 mm Temperature range: -70 °C to +180 °C Temperature change rate (heating): approx. 7 K/min Temperature change rate (cooling): approx. 6.7 K/min Max. heat compensation: approx. 3000 W Temperature deviation (time): ±0.1 to ±0.5 K Temperature homogeneity (spatial): ±0.5 to ±1 K Temperature gradient: ≤2 K Climate range (temperature): +10 °C to +95 °C Dew point range: -3 °C to +94 °C Humidity range: 10 to 98 % RH Humidity deviation (time): ±1 to ±3 % RH Temperature deviation (time, climate operation): ±0.1 to ±0.3 K Temperature homogeneity (spatial, climate operation): ±0.5 to ±1 K Refrigerant: R449A / R23 Refrigerant quantity: 2.50 kg / 0.75 kg Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 9 kW Rated current: 20 A Sound pressure level: approx. 57 dB(A) Equipment Touchscreen control Stainless steel interior Large viewing window Interior lighting Water-cooled version Side cable entry Multiple shelf levels Ethernet interface USB interface Accessories as shown in the pictures Application areas Temperature testing Climate testing Environmental simulation Material testing Electronics testing Quality assurance Research and development Condition Bedpfx Afszznx Isgeww Used Optical condition as shown in the pictures Scope of supply 1x Vötschtechnik ClimeEvent C/340/70/5 climate test chamber Accessories as shown in the pictures Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leakage test with certificate 4. Documented test run after successful inspection Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Weiss Umwelttechnik GmbH Salt spray chamber / corrosion testing cabinet Weiss SC/KWT 450 salt spray chamber Testing system for salt spray, corrosion and coating tests For sale is a used salt spray chamber from Weiss Umwelttechnik GmbH. The system is suitable for corrosion tests, coating tests, material tests, quality assurance, as well as industrial testing and development applications. Bwedozzzpgepfx Afgjw Technical data: Manufacturer: Weiss Umwelttechnik GmbH Type: SC/KWT 450 Device type: Salt spray chamber / corrosion testing cabinet Size: 450 l Test chamber volume: approx. 360 l Brine reservoir: approx. 180 l Test chamber dimensions: approx. 850 × 570 × 740 mm (W × D × H) External dimensions: approx. 1,930 × 800 × 920 mm (W × D × H) Weight (empty): approx. 140 kg Max. test part weight: 100 kg Max. load per rod: 8 kg Brine consumption: approx. 0.5–1 l/h Compressed air consumption: approx. 1.5 Nm³/h Demineralized water consumption: approx. 0.4 l/h Mains connection: 1/N/PE AC 230 V ±10 % / 50 Hz Rated power: 2.0 kW Rated current: 8.5 A Permissible operating overpressure: 6 bar Equipment: Programmable control unit Test chamber with sample holders Brine supply system Compressed air treatment Connection for demineralized water Exhaust connection Brine drain Documentation / operating documents available Accessories according to the pictures Areas of application: Corrosion testing Salt spray testing Coating testing Material testing Quality assurance Automotive industry Research and development Scope of delivery: 1x Weiss SC/KWT 450 salt spray chamber Sample holders according to the pictures Original operating/service documents Accessories according to the pictures Condition: Used Optical condition according to the pictures Normal signs of wear and tear due to age and use The table shown in the photos or other items not explicitly mentioned are not part of the sale. Shipping or freight shipping possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Vötschtechnik Climate test chamber / Temperature test chamber Vötschtechnik ClimeEvent C/340/70/5 Temperature and climate test chamber, water-cooled For sale is a used climate test chamber from Vötschtechnik GmbH. The test chamber is suitable for temperature and climate tests, environmental simulation, material testing, quality assurance, as well as development and stress tests. Technical data Manufacturer: Vötschtechnik GmbH Type: ClimeEvent C/340/70/5 Device type: Climate test chamber / Temperature test chamber Year of construction: 2018 Test chamber volume: approx. 340 liters Weight: approx. 650 kg External dimensions (H x W x D): approx. 1830 x 900 x 1890 mm Internal dimensions (H x W x D): approx. 750 x 580 x 765 mm Temperature range: -70 °C to +180 °C Temperature change rate (heating): approx. 7 K/min Temperature change rate (cooling): approx. 6.7 K/min Max. heat compensation: approx. 3000 W Temperature deviation (time): ±0.1 to ±0.5 K Temperature homogeneity (spatial): ±0.5 to ±1 K Temperature gradient: ≤2 K Climate range (temperature): +10 °C to +95 °C Dew point range: -3 °C to +94 °C Humidity range: 10 to 98 % RH Humidity deviation (time): ±1 to ±3 % RH Temperature deviation (time, climate operation): ±0.1 to ±0.3 K Bwjdpfx Aezzag Dsfgjw Temperature homogeneity (spatial, climate operation): ±0.5 to ±1 K Refrigerant: R449A / R23 Refrigerant quantity: 2.50 kg / 0.75 kg Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 9 kW Rated current: 20 A Sound pressure level: approx. 57 dB(A) Equipment Touchscreen control Stainless steel interior Large viewing window Interior lighting Water-cooled version Side cable entry Multiple shelf levels Ethernet interface USB interface Accessories as shown in the pictures Application areas Temperature testing Climate testing Environmental simulation Material testing Electronics testing Quality assurance Research and development Condition Used Optical condition as shown in the pictures Scope of supply 1x Vötschtechnik ClimeEvent C/340/70/5 climate test chamber Accessories as shown in the pictures Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leakage test with certificate 4. Documented test run after successful inspection Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Vötsch Temperature testing chamber VTS³ 7160-5 H Water-cooled For sale is a used temperature testing chamber from the manufacturer Vötsch. The testing chamber is suitable for temperature and climate testing, environmental simulation, material testing, quality assurance, as well as development and stress testing. Technical data Manufacturer: Vötsch Type: VTS³ 7160-5 H Device type: Temperature testing chamber Test chamber volume: approx. 1568 liters Test chamber dimensions: approx. 1100 x 950 x 1498 mm (W x D x H) Housing dimensions: approx. 1300 x 2635 x 2013 mm (W x D x H) Weight: approx. 1700 kg Temperature range: -70 °C to +180 °C Temperature change rate, heating: approx. 5 K/min Temperature change rate, cooling: approx. 4 K/min Max. heat compensation: approx. 5000 W Temperature deviation over time: ± 0.1 to ± 0.5 K Temperature homogeneity spatially: ± 0.1 to ± 2.0 K Refrigerant: R404A Refrigerant quantity: 5.20 kg ND max.: 18 bar g HD max.: 25 bar g Refrigerant: R23A Refrigerant quantity: 1.30 kg ND max.: 18 bar g HD max.: 25 bar g Cooling water consumption at full load with temperature difference Dt = 10 K: 2.2 m3/h temperature difference Dt = 5 K: 4.4 m3/h Mains connection: 3/N/PE AC 400 V ±10 % / 50 Hz Bodpfezv S Hfox Afgjww Rated power: 17.6 kW Rated current: 32 A Equipment Touch panel operation Interior made of stainless steel Side openings Test chamber equipment as shown in the pictures Application areas Temperature testing Climate testing Environmental simulation Material testing Electronics testing Quality assurance Research and development Condition Used Optical condition as shown in the pictures Scope of delivery 1x Vötsch VTS³ 7160-5 H temperature testing chamber Important note: For the safety of our customers, the following work is carried out on the offered climate chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Shipping or freight shipping possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Weiss   Type: WK3-340/70   Weiss Climate Testing Chamber, Air-Cooled   Control Panel »Touch Panel« All control and operating commands can be initiated by simply touching the function symbols on the »Touch Panel« control panel.   Adjustable Feet To compensate for uneven floors and ensure sufficient ventilation of the machine section, the testing chamber is equipped with adjustable feet.   Feedthroughs The testing chamber is equipped with feedthroughs on the right and left sides. These allow measuring cables and testing equipment to be routed into the test chamber.   Feedthrough installed as standard R1: 125 mm L1: 85 mm   Volume: 335 liters   Test chamber dimensions:   Test chamber dimensions: Height 750 mm, Width 580 mm, Depth 765 mm External dimensions: Height 1775 mm, Width 870 mm, Depth 1600 mm   Data for temperature tests:   Minimum temperature -72°C Maximum temperature +180°C   Temperature deviation, over time ± 0.1 to ± 0.5 K Temperature homogeneity, spatially ± 0.5 to ± 1.5 K   Temperature change rate, cooling 3 K/min Temperature change rate, heating 3 K/min   Data for climate tests:   Temperature range +10°C to +95°C Dew point range -3°C to +94°C Humidity range 10 to 98% RH   Temperature deviation, over time ± 0.1 to ± 0.3 K Temperature homogeneity, spatially ± 0.5 to ± 1 K Humidity deviation, over time ± 1 to ± 3% RH   Data for operation: Bjdpfeziiwuox Afgeww   Test chamber lighting: Halogen bulb 2 x 24V, 50W Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated current: 16 A Rated power 4.9 kW Fuse, to be provided by the customer: 16 A slow-blow   Refrigerant: R-452A/R23   Weight Approx. 585 kg   For your safety as a buyer, please note the following information!   The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run.   Condition: used   Scope of delivery: (See picture)   (Changes and errors in the technical data, specifications are subject to change!)   We will be happy to answer any further questions you may have over the phone.

Condition: used, Vötsch   Type: VCS³ 7027-10   Vötsch climate testing chamber, water-cooled With a temperature change rate of 10 K/min   Data for temperature testing: Temperature range: -72°C to +180°C Temporal temperature deviation in the center of the usable space: ± 0.3 K to ± 0.5 K Spatial temperature deviation: ± 0.5 K to ± 2.0 K   Temperature change rate Heating: 10 K/min Cooling: 14.5 K/min   Data for climate testing: Temperature range: +10°C to +95°C (extended climate range: 2°C/95% RH, regulated for a maximum of 2 hours) Temporal temperature deviation in the center of the usable space: ± 0.2 K to ± 0.3 K Spatial temperature deviation: ± 0.5 K to ± 1.0 K Temporal humidity deviation in the center of the usable space: ± 1% to ± 3% RH Humidity range: 10% to 98% RH (extended climate range: 2°C/95% RH, regulated for a maximum of 2 hours)   External dimensions: Width 780 x Depth 1895 x Height 1775 (mm) Test chamber dimensions: Width 580 x Depth 615 x Height 750 (mm) Test chamber volume: approx. 270 liters   Side opening: 50 mm Side opening: 125 mm   Data for operation: LED strip 24 V, 6.8 W / 2 x halogen bulb 24 V, 50 W Rated voltage: 3/N/PE AC 400 V ± 10%, 50 Hz Rated power: 14 kW Rated current: 26 A Fuse, on customer’s side: 63 A, slow-blow   Refrigerant: R404A/R-23   Weight approx. 835 kg   Bedpfx Afezh Huuogoww For your safety as a buyer, please note the following information!   The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run.   Condition: used   Scope of supply: (See picture)   (Changes and errors in the technical data are subject to change!)   We will gladly answer any further questions you may have by phone.

Condition: used, Weiss Type: WK11 - 600/70/5 Bjdezimg Hopfx Afgeww Weiss Climate Chamber, Water-Cooled The Weiss climate chamber WK11-600/70/5, with an approximate usable volume of 600 liters, is suitable for temperature and humidity testing as well as for conditioning samples and materials in the range of -70 °C to +180 °C. Simcon/32 - Net Controller Technical Data: Test chamber designation: WK11-600/70/5 External dimensions with hinges and door closure: Height 1995 mm, Width 1090 mm, Depth 1660 mm External dimensions without hinges and door closure: Height 1995 mm, Width 1000 mm, Depth 800 mm Internal dimensions: Height 950 mm, Width 800 mm, Depth 800 mm Connections: 2x R1 NW 125 mm ∅ 1x L1 NW 50 mm ∅ Test chamber volume: approx. 600 liters Data for temperature tests: Temperature range -70 °C to 180 °C Temporal temperature deviations in the center of the usable space: ± 0.1 to ± 0.5 K Spatial temperature deviations: ± 0.5 to ± 2 K Temperature gradient: 1 to 4 K Temperature change rate: Heating: 6 K/min Cooling: 6 K/min Thermal compensation: at +20 °C: 5000 W at -20 °C: 5000 W Data for climate tests: Temperature range +10 to +95 °C Humidity range 10 to 98 % RH Temporal temperature deviations in the center of the usable space: ± 0.1 to ± 0.3 K Spatial temperature deviations: ± 0.5 to ± 1 K Temperature gradient: 1 to 2 K Temporal humidity fluctuation in the center of the usable space: ± 1 to ± 3 % RH Thermal compensation: 500 W 3/N/PE AC 400V ±10% 50Hz Rated power: 16.5 kW Rated current: 29 A Fuse on customer side: 32 A slow-blow Permissible weight of test specimen: Total load of the shelf supports: 80 kg Test chamber floor: 80 kg, insert shelf: 40 kg Weight: 675 kg Refrigerant: R452A / R23 Important note: "The table shown in the photos is not included in the sale." For your safety as a buyer, please note the following information! The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Weiss Type: WK3-2200/40/5/V Weiss Climate Chamber, Water-Cooled Data for temperature tests: Temperature range: -40°C to +180°C Temperature change rate: Heating: 6.0 K/min Cooling: 11.5 K/min Temperature deviation: Temporal: ± 0.8 K Spatial: ± 2.0 K Maximum heat compensation: 8000 W Data for climate tests: Temperature range: +10 to +95°C Dew point temperature range: +4 to +94°C with closed bottom element Humidity range: 10 to 95% RH Temperature deviation (temporal): ± 0.3 K Humidity deviation (temporal): ± 3% RH Temperature homogeneity: Spatial: ± 1.0 K Maximum heat compensation: 500 W Bedpsziixrofx Afgsww Test chamber volume: 2160 liters Test chamber dimensions: Height: 1115 mm, Width: 1400 mm, Depth: 1400 mm External dimensions (lowered): Height: 2318 mm, Width: 1860 mm, Depth: 3658 mm External dimensions (above shaker): Height: 2710 mm External dimensions (maximum stroke height): 3038 mm Dimensions of interchangeable floor: Width: 1600 mm, Depth: 1504 mm Data for operation: Rated voltage: 3/N/PE AC 400V, 10%, 50Hz Rated power: 38.0 kW Rated current: 63.0 A Customer-side fuse protection: 80 A, slow-blow Refrigerant: R 404A Weight: approx. 2100 kg For your safety as a buyer, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of any necessary components. 2. If necessary, refilling with legally compliant refrigerant. 3. Leak test with certificate. 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, Weiss   Weiss UV200SB Weathering Chamber / UV Aging Test Device Air-cooled, approx. 200 liters   For sale is a Weiss UV200SB weathering chamber, a high-quality Bwjdpfjziiz Hjx Afgow test device for simulating the effects of sunlight and weather. The device is used for accelerated aging tests on plastics, paints, coatings, and other materials according to common standards (e.g., DIN EN ISO 4892-3).   Technical details   UV spectrum: approx. 290–450 nm (UVA/UVB) Lamp type: Fluorescent UV lamps Temperature range (UV phase): approx. +20 to +80 °C Climate cycling: Alternating between UV irradiation, condensation, and spray phases   Humidity range: approx. 10 % … 95 % RH (relative humidity) at temperatures above approx. +10 °C Temperature change rate: approx. 3 K/min   Test chamber dimensions: Height 750, Width 650, Depth 400 mm External dimensions: Height 1800, Width 920, Depth 1345 mm   Voltage: 3/N/PE AC 400V +10% 50Hz Rated power: 9.0 kW Rated current: 15.0 A   Refrigerant: R 404A   For your safety as a buyer, please note the following information!   The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run.   Condition: used   Scope of delivery: (See picture)   (Changes and errors in the technical data and specifications are reserved!)   We will be happy to answer any further questions you may have by telephone.