Used Adsorption Dryer for sale (1,667)

Condition: used, Year of construction: 2020, operating hours: 35,933 h, functionality: fully functional, machine/vehicle number: 200202-0010, total length: 8,250 mm, total width: 2,600 mm, total height: 3,150 mm, type of input current: DC, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, emergency stop, type plate available, We are offering our outdoor drying system, model RG 50, from Heber. This weather-resistant, container-like drying unit is used for the technical drying of: Wood chips Grain Hay / Straw Bulk goods in general The system operates according to the principle of convective warm air drying: Heat source Waste heat (e.g., from a CHP unit) Pgedpfxszba Nye Akxsr Alternatively, oil/gas heating Air treatment, fan draws in ambient air, air is heated, drying process Warm air flows through the material, moisture is absorbed, exhaust air, moist air is discharged High energy efficiency through waste heat utilization, uniform drying, automated operation. Air flow rate: 55,000 m³/h Continuous operation (24/7 possible) Danfoss control system, manual is available. With 6 possible connections for drying containers. The system is still connected but is no longer in operation. Dismantling is the responsibility of the buyer! A telecrane and a low-bed trailer are required for transport! Inspection is possible by appointment!

Condition: used, Year of construction: 2018, operating hours: 234 h, functionality: fully functional, fuel type: electric, drive type: Elektro, Scrubber-dryer Psdewkk T Aopfx Akxegr Condition: Ready for use and fully functional Technical condition: Good Description: Battery. Year of manufacture: 2023

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, power: 750 kW (1,019.72 HP), Drying Technology Title: Multi-material Dryer + Boiler Condition: Used – Very good condition Description: For sale: multi-material dryer Brand: Gerdes System with perforated moving floor Moving floor driven by electro-hydraulic power unit 3 levels 2 fans per level (6 fans in total) Control cabinet with high-performance PLC Temperature sensors for each level Blockage detector LASCO wood chip boiler 750 kW Fully automatic Remote monitoring Ash screw conveyor and automatic ash removal Fire protection flap Complete package sold with various accessories (screws, conveyors, etc.) - Hydraulic power unit - Material receiving bin - Belt conveyor - Rotary screen - Auger elevator for feeding the dryer - Reclaim auger under the dryer - Trough screw conveyor - Filling chamber and wood chip storage tank for the boiler - Chip receiving bin and screw conveyor - 2 control cabinets Pjdpfeyyddgjx Akxegr - Various spare parts (pipes, clamps, electric motors, filters, cyclone, etc.) To be seen on site. Excellent working condition. Also for sale: KAHL pellet press, complete installation with bagging system. More information on request.

Condition: good (used), Year of construction: 2003, inner dimension length: 7,400 mm, inner dimension width: 4,500 mm, inner dimension height: 4,250 mm, number of chambers: 1, Equipment: CE marking, documentation/manual, Drying Chamber Manufacturer: Mühlböck Model: ZLSM Year of manufacture: 2003 Internal dimensions approx. 7,400 x 4,500 x 4,250 mm (LxWxH) 3 fans, each 3 kW 10 measuring points With frequency converter With control system Heating capacity: 223 kW Water temperature: 85 °C Water flow: 14 m³/h Voltage: 230/400 V Connected load: 12 kW Fans: 3 x 3 kW Control: MB Intellevent 5000 program The unit was previously connected to a central heating system. Central heating not included! The drying chamber will be professionally dismantled and loaded onto a truck. Pgsdpey Evkpefx Akxor Transport dimensions: 12 loading meters, approx. 5,000 kg

Condition: good (used), Year of construction: 2017, ESC Screen Printing System 1100-2C/IR with IR Dryer Manufacturer: ESC – Europa-Siebdruck-Centrum GmbH & Co. KG Model designation according to nameplates: PAJD 1100-2C/IR and Perfection 1100 2C/IR Year of manufacture according to nameplates: 2016 and 2017 Machine/Factory numbers: 9960-14-1065 / 11661 Electrical connection: 400 V, 50 Hz Rated current: 120 A (nameplate PAJD) Rated power: 76 kW (nameplate Perfection) Protection class: IP40 Belt type: IR temperature tunnel with conveyor belt (width as per series: 1100 mm) Assembly: IR drying unit for screen printing or coating processes Design: Enclosed safety housing with access doors Application area: Drying/cure of printed or coated components Location: Schierling Pgjdpfx Aoyrm Hyekxjr Inspection possible by appointment.

Condition: excellent (used), Year of construction: 2020, MANUFACTURER: DONALDSON TYPE: DC0550AB SERIAL NO: 200020860 YEAR: 2020 Pgodpjxyaurofx Akxer POWER (kW): 1.11 CAPACITY (m3/min): 9.17 PRESSURE (bar): 14 HOURS (DOC/TOTAL) INVERTER INTEGRATED DRYER: R407C 1.15 kg

Condition: used, Year of construction: 1996, UV system UV light dryer IST STRAHLTECHNIK Lignocurve Model HL - 160 -1 H DL UV tubes T 1600 U1 Pedpfxex Hglaj Akxegr UV range 180-450 nm

Condition: good (used), Year of construction: 2016, operating hours: 1,200 h, functionality: fully functional, machine/vehicle number: 90-0122-DDI-IR-INTE, input voltage: 415 V, total length: 3,000 mm, total width: 1,000 mm, total height: 1,000 mm, type of input current: three-phase, year of last overhaul: 2026, conveyor belt width: 800 mm, UV drying tunnel manufactured by Natgraph, designed for use with screen printing machines. The machine was manufactured in 2016 and is in very good technical condition. The tunnel is currently in production use and operates without issues. Main Features: - IR heating section - 2 UV lamps with precise and independent power control - Integrated cooling section to reduce the temperature of printed sheets after curing - Automatic stacker for collecting finished sheets in a neat stack - Possibility to connect with a screen printing machine - Lowering table, which provides easy operator access to the printing machine Working Process The tunnel is used for UV ink curing in the screen printing process. Printed sheets pass through the IR section and then through the UV curing section, where the ink is quickly and evenly cured by UV radiation. After curing, the sheets pass through the cooling section to reduce their temperature. Finished sheets are then automatically collected by the stacker. When connected to a printing machine, the tunnel can automatically adjust the UV lamp power to save energy. Machine Condition Year of manufacture: 2016 Technical condition: very good Machine currently in continuous production use Regularly maintained Included Equipment Natgraph UV dryer tunnel IR heating section 2 UV curing lamps Pgjdpfeyuztgjx Akxor Cooling section Automatic sheet stacker ✔ Machine ready for production ✔ Inspection possible during operation

Condition: used, Year of construction: 2016, // Equipment dismantled and stored in our warehouse // Manufacturer: Italvacuum Model: Cosmodry System IHD 3200 Year: 2016 Type: horizontal vacuum paddle dryer Application: drying wet powders ATEX (Eex) unit: yes Industries: Fine chemicals, pharmaceuticals (API), intermediates A) Agitation: Concentric agitator with heated shaft, removable in several segments (double mechanical seal) Transmission: (CEMP) - Power 30 kW + Gearbox + Chain Agitation speed: 1.6 ÷ 8.1 rpm Atex: explosion-proof ATEX II 2GD Pedpfx Aex R D Efskxogr Mounted with the dryer on a support structure (single SKID) B) Drying chamber with discharge valve Total volume : 3200 Liters Useful volume : 30% - 80% Internal pressure : -1 / 0,5 barg Jacket pressure : 0 / 1,7 barg Project temperature : -10 / +130°C Maximum heating fluid temperature: +100°C Best vacuum tightness: 4 mbar/h EX-I absolute pressure transmitter PT100 Ex-i product temperature sensor Nitrogen backwash system Rotary chopper speed: 300 / 1200 rpm (not installed) Material in contact with the product: AISI 316L - EN 1.4404 Vacuum seals: PTFE and FEP Jacket material: AISI 304 - EN 1.4301 Heating fluid: Diathermic oil Mirror-polished interior finish (Ra ≤ 0.4 µm) Satin exterior finish (Ra ≤ 1.2 µm) Inspection and Shut-off Valve DN.1650 Buffer Relief Valve DN 200/300 DN 250 Butterfly Loading Valve Prepared for the installation of two choppers (lateral knives) C) Process filter D) Vacuum unit: SAURUS939 piston vacuum pump, model VVD Pump support bench ATEX: Ex-d-IIB-T4 – IP55 Power: 11 kW Atmospheric pressure surface condenser, model VD200I E) Vacuum condensing unit - AISI 316L stainless steel with double cooling jacket in AISI 304 stainless steel. Internal design pressure: -1 / 0.5 barg Jacket design pressure: 0 / 3 barg Design temperature: -10 / 40 °C Maximum cooling liquid pressure: 2.5 bar Exchange surface area: 8.5 m2 Condensate collection capacity: 900 litres Level sensor F) External safety filter G) Temperature control system: Heating/Cooling Steam liquid heater: Pressure 7 bar - Jacket temperature: 142°C - Surface area: 1.65 m2 Cooler, mounted on the heater: cold water or brine - Pipe jacket pressure: 12 barg - Jacket temperature: 142°C - Pipe temperature: -10°C /+ 99°C - Surface area: 3.42 m2 H) Command and Control System (Electrical Cabinet + HMI) Complete technical file

Condition: like new (used), Year of construction: 2021, operating hours: 10 h, functionality: fully functional, machine/vehicle number: ABT 1/2000-8, type of input current: AC, overall weight: 4,200 kg, input voltage: 400 V, input frequency: 50 Hz, The 2 tons/hour Belt Dryer System (model ABT 1/2000-8) is an industrial drying unit manufactured by ASOS PROSES MAKİNA SAN. VE TİC. A.Ş. (Turkey). It is designed for the continuous drying of granular or particulate materials such as pet food, cereals, grains, feed, agricultural products, and similar bulk goods. The system operates indoors on a single production line, 24 hours per day, under ambient temperatures of 5–35 °C and relative humidity between 60–80 %, at sea level. The machine is engineered to reduce moisture content from 28 % to 12 %, with a feed rate of 2,000 kg/h, evaporating 364 kg of water per hour, and delivering a dry output of 1,636 kg/h. It requires 364,000 kcal/h of thermal energy, typically provided by combustible gas, with a drying temperature range of 50–60 °C. Total electrical consumption is 37 kW, with 46.2 kW installed power, powered at 400 V / 3-phase / 50 Hz, and an estimated nominal current of ≈ 78.5 A. Noise levels are below 85 dB(A) at 1 m. The required installation space is 4 m (width) × 10 m (length) × 4 m (height). The Belt Dryer unit has a drying surface of 16 m², a belt width of 2,000 mm, and a length of 8,000 mm. It uses a single-pass polyester belt. Both upper and lower casings are made of galvanized steel with rock wool insulation on heated surfaces. Inspection hatches and instrument sockets are provided on both sides for easy access and monitoring. The system includes a spreader unit for uniform material distribution, a burner chamber (400,000 kcal/h, carbon steel), and a set of circulation and exhaust fans (galvanized steel, direct drive, VSD). Multiple motors (totaling 46.2 kW) drive feeding, mixing, drying, ventilation, and heat exchange equipment. Control is managed through a floor-standing MCC and PLC cabinet (IP55, 600×4000×2200 mm), equipped with a Siemens S7-1500 PLC, 17" SCADA touchscreen (TP1900), Profinet communication, and ABB/Danfoss VSDs. All signal and power cables and galvanized trays are included, along with galvanized structural supports. Pgedpfsyb Rpdjx Akxjr The system is suitable for industrial-scale drying operations in the food, feed, agricultural, and processing industries, offering stable performance, low noise, and automated control. It is built for durability with galvanized steel construction, easy maintenance access, and optional on-site erection and commissioning by ASOS engineers. Delivery time is typically 10–12 months from advance payment, and the equipment is guaranteed for one year against material and manufacturing defects.

Condition: excellent (used), Year of construction: 2016, operating hours: 23,511 h, functionality: fully functional, Water-cooled dryer Atlas Copco FD510 Psdpfxox Sx U Dj Akxegr 30.60 m³/min Year of manufacture: 2016

Condition: good (used), Year of construction: 2000, Colortronic CTT 30 Granule Dryer Pgsdpjxlrdcsfx Akxor For climate- and air-independent drying of thermoplastic granules and regrind prior to processing, removing residual moisture from both the inside and outside of the granules. Colortronic dry-air dryers operate according to the absorption principle. Instead of heating the air, the moisture is absorbed and removed in the drying hopper. Operating voltage: 400 V Control voltage: 24 V Power: 3.5 kW Main fuse: 25 A Year of manufacture: 7/2000 Find more items - new and used - in our shop! International shipping costs on request!

Year of construction: 2004, condition: used, Koch dryair tanks 1x100 L 1x200 L 1x400 L with auxiliary heating Regulator Art.-Nr.: 2294 year: 2004 price: 7.400.00 Pgsdpjxltdwjfx Akxor contact: Mr. Rainer Eckerle

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Used Atlas Copco FD310 refrigeration dryer 18.60 m³/min Podpfoym Ub Usx Akxjgr 14 bar Year of manufacture: 2011

Condition: new, Year of construction: 2026, With the ERBA Granulate Dryer EVK 350, workpieces can be easily separated from the granulate using the integrated screening unit. The machine features excellent drying performance, a direct heating system, and digital temperature control. The working container is fully coated with polyurethane on the inside. The EVK 350 can be linked with other machines in a processing line. Technical Data: - Gross volume: 350 L - Unbalance motor power: 2.2 kW - Heating power: 3.6 kW - Speed: 1,400 rpm - Internal drum diameter: 1,210 mm As an experienced partner, we provide you with expertise in all aspects of vibratory finishing. Together with you, we develop efficient solutions to achieve optimal process results. Pgsdpjyq Rcvofx Akxor All prices are net, plus the currently applicable VAT and shipping costs. The images may show the system including accessories, which are optionally available and subject to additional charges. If interested, we look forward to your inquiry. We are pleased to provide you with non-binding, professional advice. The European Commission provides a platform for online dispute resolution (ODR platform). This offer serves solely as an online presentation of our products. Contract negotiations are conducted via telecommunications (email, telephone, messaging portal). As a first step, we will make you a non-binding offer, which will also include our general terms and conditions with imprint and information on your right of withdrawal, before a purchase or contract is concluded.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Atlas Copco FX13 compressed air dryer, 10.02 m³/min Pgjdpoyrdifofx Akxsr

Condition: excellent (used), Year of construction: 2011, MANUFACTURER: HANKINSON Pjdpeyh Uvxsfx Akxsgr MODEL: HHDP2700 SERIAL NUMBER: 4001011004 YEAR: 2011 POWER (kW): 7 CAPACITY (m³/min): 45 PRESSURE (bar): 16

Condition: good (used), Year of construction: 2013, Kaeser Pedpfxjwhvqzs Akxogr TAH7 Refrigeration Dryer Compact, fully automatic, air-cooled compressed air drying system. Flow rate: 0,60 m³/min

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, Completely overhauled, 12-month warranty, available immediately. Equipped with a safety system for solvent-based substances in accordance with DIN 1539, including exhaust fan, supply air cage filter, as well as concentration monitoring and a recirculation air filter wall in the interior. - Internal dimensions (W x D x H): 1000 x 1000 x 1500 mm - External dimensions (W x D x H): 1900 x 1430 x 2315 mm - Capacity: 1500 liters - Tmax: 300°C - Eurotherm controller 2404 (20 programs, each with 16 segments) - Eurotherm recorder - Connected load: 29 kW - 6 wire shelves included, plus V2A support brackets Podpfxovcb U As Akxegr - Minimum exhaust air flow rate: 360 m³/h - Maximum permissible solvent quantity: 36g at nominal temperature of 300°C - With concentration monitoring - New window seals - Net weight approx. 1200 kg - Includes documentation, CE declaration - Electrically tested and with DGUV test protocol Inspection in our warehouse by appointment. We offer new and used industrial ovens. Get in touch with us! Oven, ovens, drying oven, furnace, heat oven, heating cabinet, industrial oven, paint dryer, annealing oven, heating oven, tempering oven, drying cabinet, chamber oven, baking oven, recirculation drying cabinet, recirculation oven, solvent oven, chamber recirculation oven

Condition: new, No. 3187 Vacuum dryer / drying chamber ISVE ES 5 / NEW New machine, delivery time 120 days Construction features: AISI-304 stainless steel, partially insulated External diameter: 1600 mm Length of cylindrical part: 5000 mm Dryer length: 5900 mm Dryer total length plus sliding guides: 11000 mm Max. operating vacuum: -730 mm Hg Timber pile length: 5000 mm Timber pile width: 1100 mm Timber pile height: 990 mm Net wood volume: approx. 5 m3 Installed electrical power: 16,01 kW Average hourly power input: 8 kW/h Includes: - 12 electric heating plates (each 1100 x 5000 x 10 mm LWH / 57 kg / 1,25 kW) - 2 internal condensers (turbofan of 0,55 kW each 380 VCa with stainless steel pipes) - 1 one-way valve (clapet: one ¾” for vacuum circuit) - 1 solenoid air return valve (24 Vca: one 1” for the autoclave) Psdpfx Ajvc Axpjkxegr - 1 manual air return (1” ball valve) - 1 electrical control panel (PLC type Siemens S7-1200, with touch panel) - 1 ISVE server connect with remote service and control - 2 wireless moisture probes (double probes for core and surface moisture reading) - 1 wireless temperature probe (for wood core reading) - 2 plates-holder stands - 1 instruction booklet (in English with CE certificate and wiring diagrams) Transport dimensions approx. 5900 x 1620 x 2300 mm LWH Weight approx. 2900 kg Technical details, year of construction and scope of delivery according to the manufacturer, without guarantee Subject to prior sale New machines are covered by the manufacturer's warranty Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: good (used), Batch dryer dryer Aeromatic Strea 30 fluidized bed dryer batch dryer Stainless steel version Pgjdpfewyf H Njx Akxer Complete with control cabinet and accessories (operation unknown) Total height +/- 3 meter Equipped with nozzle device Suitable for drying and coating Fan power 5,5kW 62000 kcal/h See our other advertisement VMA Wekerom

Condition: excellent (used), For painting-finishing line (Ultra - Violet rays system) Max working width mm 1300 Total machine lenght: mm 2900 (ca.) Podpfx Aogz Svnskxogr Workpieces thickness (working height): mm 0 - 80 (ca.) Adjustable feeding speed: m/min 0 - 40 (ca.) PLC control panel (Touch Screen) Built-in electric and command panel Total installed power KW 36.9 Equipped with: No. 2 U.V. lamps Motorized feeding system by metal rods runned with two side-chains In-feed suction system (to take in the air) Out-feed suction system (to take away the solvent fumes)

Year of construction: 2006, condition: ready for operation (used), USED AUTOMATIC PANEL SAW WITH FRONT LOADING Brand: SCM Podpfjhkr A Ssx Akxogr Model: SIGMA IMPACT Year: 2006 CE compliance Useful cutting dimensions: 3200 x 3200 mm. Cutting height: 67 mm 3 air tables: one long and two shorter, wide tables 6 pneumatic clamps Main saw motor: 10 HP Scoring saw. PC with WINCUT software.

Condition: good (used), Year of construction: 2016, Conveyor dryer for DTG : Fahrenheit Electric 6160 - Chiossi & Cavazzuti Hot air dryer in good condition, for all kind of digital/screen printing/transfer applications Year 2016 Delivery not included, we can ship everywhere, ask for a quote Caractéristics : MAX POWER: 49 KW APPLICATION FIELD : DTG, screen printing, transfer printing DRYING by HOT AIR circulated (very high power) DRYING AREA: 6000 x 1600 mm PRODUCTION MAX : 600 pieces/h Psdpfxjxzq Tbj Akxsgr

Condition: used, KAESER TAH 6 Refrigeration Dryer - used - Pedpowzifljfx Akxsgr ----- Technical Data ----- Maximum pressure: 16 bar, Power supply: 230 Volt