Used Airless Spray for sale (2,438)

Condition: excellent (used), Year of construction: 2020, Pneumatic Double Diaphragm Pump Cobra 40-10 Top condition – Year of manufacture: 2020 Its unique design enables low-pulsation operation. Consistent paint flow for a perfect spray pattern and highest surface quality. Ideally suited for processing shear-sensitive and moisture-sensitive materials. Minimal shear forces – ideal for processing, e.g., UV coatings. Ideal for handling small material volumes and frequent color changes. Scope of delivery: Basic unit on frame, HD double hose 7.5 m, upper container 5 l Ex, AirCoat spray gun AC 4600 Professional including red air cap and holder, AirCoat nozzle ACF 3000 11/40. Technical Data: Lhjdpfoxdtkuox Aanjr Ratio: 40:1 Displacement per double stroke: 10 cm³ Flow rate at 200 double strokes: 2 l/min Max. operating pressure: 250 bar Weight: 23 kg Location: 54634 Bitburg Extremely low hours of use –

Year of construction: 2020, condition: excellent (used), functionality: fully functional, machine/vehicle number: PB-VB 1555, Equipment: cabin, Spray booth dryer VENUS model PB-VB 1555 - Internal dimensions 15.0 x 5.0 x 5.0 m - Walls protected by easily removable white lacquer - Thermal insulation of walls (mineral wool 40 mm) - Motorized aluminum entrance gate (4.8 x 5.0 m), 2 pcs. - Service door, 3 pcs. - Operator lifting grates, carrying capacity 1,100 kg/m2 - Vertical ventilation, airfall velocity ~0.3 m/s - Supply ventilation and heating unit (capacity 45 000 m3/h, heating power / motor power Ledpfx Ajt S Upneanehr 500 / 18.5 kW), heating medium gas or fuel oil, 2 pcs. - Exhaust generator (capacity 45 000 m3/h, motor power 18.5 kW), 2 pcs. - Heat recovery rotary recuperator (efficiency >50%), including support structure, 2 pcs. Heating power with rotary recuperators is 2 x 250 kW. - Air filtration: pre-filters + ceiling filters (~67 m2). - Two-stage air filtration at the outlet: 1. inert cardboard floor filters (~45m2) - pre-filtration; 2. non-woven glass filters in exhaust units - fine cleaning - Primary overhead lighting, 20 pcs. - Additional side lighting, 17 pcs. - Control cabinet

Condition: good (used), Ceever Spraymaster Turning Spray Washer The Spraymaster series industrial washers are advanced solutions for spray cleaning small and medium-sized components with a capacity of up to 4000 kg. Thanks to a rotating table that ensures even wetting of the parts with the spray jet, these systems guarantee maximum surface treatment efficiency. Inside the treatment chamber, a channel system with strategically positioned nozzles enables complete spray cleaning of all surfaces, thus optimizing chemical, mechanical, and thermal processes in a single operation. Manufacturer: Ceever Type: Spray Master Turning Machine No. Z 429 Load: 500 kg/batch Voltage: 380 volts Current: 90 A Connected load: 62 kW Find more items – new and used – in our shop! Lhedjx Ex Nzspfx Aaner International shipping costs on request!

Condition: excellent (used), Weiss Type: SWT 200/400-S Weiss Spray and Splash Water Test Cabinet This equipment tests the ingress of water into housings. In conjunction with a timer, the test cycle can be automated for an adjustable test duration from 3 seconds up to 30 hours. According to DIN VDE 0470 T1 and EN 60529 for testing protection ratings IPX3 and IPX4. Thanks to the integrated recirculation system, water consumption can be minimized. Features: - Glass door with wiper - Pneumatic drive for the oscillating tube - Adjustable oscillation angle - Interchangeable oscillating tubes - Swivel and exchangeable nozzle holders - Adjustable and monitored water flow rate - Test duration control Mechanical Load Data: - Max. load with test object (evenly distributed over area) - Permissible test load weight for carrying rack (total): 25 kg - Spray radius: 200 mm / 400 mm Test Data for IP Protection Ratings: - Oscillation speed: approx. 60°/s - Oscillation angle for IPX3: approx. ±60° - Oscillation angle for IPX4: approx. ±180° to -10° Dimensions: - External dimensions with control cabinet (D x W x H): approx. 1000 x 1350 x 1900 mm - External (D x W x H): approx. 1000 x 1000 x 1900 mm - Internal dimensions (D x W x H): 400 x 650 x 750 mm Operating Data: - Voltage: 3/N/PE AC 400V ±10% 50 Hz - Rated power: 1.5 kW Lhodpfxoxxuyte Aanor - Rated current: 5.0 A - Weight: 375 kg Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see pictures) (Specifications subject to change and errors excepted!) For further questions, please feel free to contact us by phone.

Condition: good (used), Year of construction: 1985, total height: 2,000 mm, overall weight: 150 kg, total length: 1,300 mm, total width: 1,000 mm, inner dimension height: 950 mm, inner dimension width: 900 mm, inner dimension length: 1,100 mm, Paint spray booth for small parts / color samples, exhaust air volume 3100 m3/h, motor 0.75 KWDimensions 1000x1300x2000 mm, approx. 150 kg Ledjvl H Sfopfx Aanjhr

Condition: new, Year of construction: 2025, We offer you: Paint wall TPW1515 Working dimensions (mm): 1500 (w) x 800 (d) x 1500 (h). Overall dimensions (mm): 1800 (w) x 1200 (d) x 2200 (h) Standard equipment: • 1,5 kW fan power, • Capacity: 8 640 m³/h, • 930 Pa compression, • Lighting: 2 x 36 W, • Explosion-proof Ex fan, • 3-stage air filtration, • Paint stop filter, • Filter fleece, • IP 66 control panel, • IP 65 hermetic lighting. Our cabins are characterized by a very high quality of workmanship, safety of use and the selection of cab parameters to the existing building. We advise on the selection of spray booths, dedusting systems, exhaust systems and industrial recuperation. CHOOSE BUMEX SP. Z O.O. Very high quality of the machines offered on the market. Lhodpfx Aajg Sikrjnjr Professional advice and service. Guarantee. Warranty and post-warranty service. Full technical documentation. 100% satisfaction of our clients. All products of the brand BUMEX SP. Z O.O.. have WE certificate. We offer our own transport - prices are agreed each time for a given offer. We issue VAT invoices. Short lead times! Possibility to order machines in various, personalized configurations and dimensions! Please do not hesitate to contact us.

Condition: new, Year of construction: 2024, Advantages -Compact design, space-saving -Powerful, high extraction capacity, low operating costs -Easy to maintain, long filter service life -Universally applicable, variable accessories Lhsdpfx Ajbpg E Eeanor -High flexibility -Mobile design -Suction technology with front plate system Technical data: Nominal motor power: 0,75 kW / 2,1 kW Motor speed: 960 / 1430 min Air volume: 6 800 m³ / h Filter surface: 2 m² ( 2 x 1 mtr.) Connection diameter 300 mm with throttle valve Dimensions (W / H / D) in mm: 2971 x 1405 x 1215 Weight: 248kg

Condition: excellent (used), functionality: fully functional, Spray paint surface finishing system pistol with spare parts Lhsdpfxsxxhrcs Aansr

Condition: used, Year of construction: 2015, Very professional and complete blasting cabin offered. In good condition. Brand: Straaltechniek. Equipped with elevator and screw conveyor for transporting the blasting media back into the pressure vessel. The extraction system features filter cartridges that are automatically cleaned. Ljdpfx Aajx A Tuksnohr Dimensions: 5000 mm deep, 4000 mm wide, 3000 mm high.

Condition: excellent (used), Type: SAL 1000-FL PLC / V.715.362.520 For sale is a used VLM Salt Spray Corrosion Test Chamber, type SAL 1000-FL PLC, ideal for industrial corrosion tests in accordance with international standards (DIN EN ISO 9227, ASTM B117). Perfectly suited for both laboratory and production environments to test materials, coatings, and components under controlled corrosive conditions. Features: - Robust stainless steel frame construction, max. load 450 kg - Precise control and reproducible testing - Versatile applications for salt spray, condensation water, and ventilation testing Technical details: - Exterior: Stainless steel 1.4301, powder-coated (special version) - Test chamber: Stainless steel, ECTFE-coated - Max. chamber temperature: +80 °C - Temperature stability: ±0.3 °K, temporally ±0.1 °C - Process control: PLC with touchscreen, LED display - Interface: Ethernet - Water quality: demineralized, max. conductivity 20 µS/cm - Humidifier water consumption: approx. 0.5 l/h (depending on program) - Water connection pressure: 2–4 bar - Compressed air consumption: approx. 20 m³/h - Compressed air connection: 6–8 bar - External dimensions (W x D x H): 2160 x 670 x 1090 mm incl. base cabinet: 2160 x 670 x 1890 mm - Internal chamber dimensions (W x D x H) / volume: 1400 x 605 x 920 mm / 1040 l Lhjdpfxsxnyqvs Aansr - Max. load sample rod: 40 kg - Electrical connection: 400 V / 50 Hz / 4000 W - Weight (empty): 350 kg Condition: used Scope of delivery: (see image) (Subject to changes and errors in technical data and specifications!) For further questions, we are happy to assist you by phone.

Condition: new, Year of construction: 2025, TM2015 spray booth Working dimensions (mm): 2000 (w) x 1500 (h) x 450 (d) Overall dimensions (mm): 2200 (W) x 2250 (H) Technical data: • 1,5 kW fan power, • Capacity 7600 m³/h, • 950 Pa compression, • Right or left side discharge, • 3 stage air filtration, • The degree of filtration at the level of 98%, • Explosion-proof Ex fan, • IP 66 control panel, • IP 65 hermetic lighting. Our cabins are characterized by a very high quality of workmanship, safety of use and the selection of cab parameters to the existing building. We advise on the selection of spray booths, dedusting systems, exhaust systems and industrial recuperation. CHOOSE BUMEX SP. Z O.O. Very high quality of the machines offered on the market. Professional advice and service. Warranty. Ledod S N S Hjpfx Aanjhr Warranty and post-warranty service. Full technical documentation. 100% satisfaction of our clients. All products of the brand BUMEX SP. Z O.O. have WE certificate. We offer our own transport - prices are agreed each time for a given offer. We issue VAT invoices. Short lead times! Possibility to order machines in various, personalized configurations and dimensions! Please do not hesitate to contact us.

Condition: excellent (used), Weiss Type: SC/KWT 450 Salt Spray Chamber Technical Data: Test chamber volume: 450 liters Maximum load: 100 kg Brine reservoir: 180 liters External dimensions: Height 920 mm, Width 1930 mm, Depth 800 mm Test chamber dimensions: Height 740 mm, Width 850 mm, Depth 570 mm Applications: Corrosion tests: Lodpfxow Hz Trs Aanshr Salt spray test: Ambient temperature up to +50°C Condensation water test: Ambient temperature up to +45°C Humidifier +75°C Temperature stability The temporal temperature deviation is ± K. Voltage: 1/N/PE AC 230V ±10% 50Hz Rated power: 2.0 kW Rated current: 8.5 A Combination: Salt spray test SS: DIN 50021 Condensation water test KFW: DIN 50017 Standard climate (ventilation): DIN 50014 Weight: 180 kg Condition: used Scope of delivery: (See picture) (Subject to technical modifications and errors! All provided data are subject to change!) For further questions, please feel free to contact us by phone.

Condition: new, Year of construction: 2025, functionality: fully functional, The company BUMEX SP. Z O.O. A car wash for preparing elements before powder coating Working dimension: 1500 x 3200 x 2200mm Chemical tanks heated by oil, gas or electricity, Liquid tanks between 1500-2000l 3-stages of work, Operating temperature up to 60 degrees Celsius, Fully automatic control Pre-filter to collect impurities Made of AISI 1.4301 acid-resistant sheet metal Our devices are characterized by very high quality of workmanship, safety of use and the selection of cabin parameters to the existing building. We advise on the selection of painting booths, dust removal systems, exhaust systems and industrial heat recovery. CHOOSE BUMEX SP. Z O.O. Very high quality machines among those offered on the market. Professional advice and service. Guarantee. Warranty and post-warranty service. Lsdpfxohfv D So Aanshr Full technical documentation. All products of the BUMEX SP brand. Z O.O. are EC certified. We offer our own transport - prices are determined each time for a given offer. We issue VAT invoices. Short lead times! Possibility to order machines in various, personalized configurations and dimensions! Please contact us.

Condition: good (used), White Type: SC/KWT 450 Salt spray chamber Technical data: Test chamber capacity 450 liters Max. load 100 kg Brine storage tank 180 liters External dimensions: Height 920 mm Width 1930 mm Depth 800 mm Test compartment dimensions: Height 740 mm Width 850 mm Depth 570 mm Areas of application: Corrosion tests: Salt spray test: room temp. up to + 50°C Condensation water test: Room temp. up to + 45°C Humidifier +75°C Temperature constancy The temperature deviation over time is ± K. Lhsdeudvg Rjpfx Aanjr Voltage: 1/N/PE AC 230V ±10% 50Hz Rated power 2.0 kW Rated current 8.5 A Combination: Salt spray test SS: DIN 50021 Condensation water test KFW: DIN 50017 Normal climate (ventilation): DIN 50014 Weight: 180 kg Condition: second-hand / used Scope of delivery: (see picture) (We reserve the right to make changes and errors in the technical data and specifications) We will be happy to answer any further questions you may have on the phone.

Condition: new, Year of construction: 2025, The perfect paint set for car rims, motorcycle frames or other smaller things with a rail system and trolleys. Powder coating oven 1500 x 1500 x 1800 mm Powder coating booth 2000 x 1800 mm Oven / Dryer Technical data: Working dimension 1500 x 1500 x 1800 mm • Power consumption: 20 kW • Maximum operating temperature: 230 ° C Equipment: • Trolley inside, • Outdoor trolley, • True Fan Cooking (Equal temperature throughout the furnace), • Locks for safe opening and closing. Powder cabin: Working dimensions: 2000 x 1800 mm 2.2 kW fan power Fan capacity 10,500 m³ / h Very quiet operation Automatic filter cleaning CHOOSE BUMEX SP. Z O.O. Very high quality of the machines offered on the market. Professional advice and service. Guarantee. Lhjdpfed S N R Uex Aanjr Warranty and post-warranty service. Full technical documentation. 100% satisfaction of our clients. All products of the brand BUMEX SP. Z O.O. have WE certificate. We offer our own transport - prices are agreed each time for a given offer. We issue VAT invoices. Short lead times! Possibility to order machines in various, personalized configurations and dimensions! Please do not hesitate to contact us.

Condition: excellent (used), Weiss Type: SWT 200/400 Weiss spray and splash water test cabinet The penetration of water into the housing is tested. In conjunction with a timer, the test cycle can be automated with an adjustable test time of 3 seconds to 30 hours. According to DIN VDE 0470 T1 or EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated circulation device means that water consumption can be reduced to a minimum. Features Glass door with wiper Pneumatic drive of the swivel tube Adjustable swivel angle Replaceable swivel tubes Nozzle holder swivels and can be replaced Adjustable water volume flow and measurement Control of the test duration Data for mechanical stress Lhsdpfovzz A Rjx Aanor Max. load with test material (evenly distributed over the surface) Permissible test material weight for test material carrier (total) 25 kg Spray radius 200 mm / 400 mm Data for IP protection class tests Swivel speed approx. 60°/s Swivel angle IPX3 approx. ± 60° Swivel angle IPX4 approx. ± 180° -10° Dimensions: External dimensions with control cabinet (D x W x H) approx. 1000 x 1350 x 1,900 mm External (D x W x H) approx. 1000 x 1000 x 1,900 mm Internal dimensions (D x W x H) 400 x 650 x 750 mm Data for operation Voltage: 3/N/PE AC 400V ±10% 50hz Rated power 1.5 KW Rated current 6.0 A Weight: 375 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: new, Year of construction: 2024, Paint set: Powder coating furnace 1200 x 1500 x 1800 mm Powder coating booth 1400 x 1400 mm Complete kit for manual powder application OVEN / DRYER TECHNICAL DATA: Working dimension (mm): 1200 x 1500 x 1800, • Power consumption: 20 kW. EQUIPMENT: • Trolley inside, • Outdoor trolley, • True Fan Cooking (Equal temperature throughout the furnace), • Locks for safe opening and closing. POWDER CABIN: Working dimension (mm): 1400 x 1800, Fan power: 1,5 kW, Fan capacity: 6 500 m³/h, Very quiet operation, Automatic filter cleaning. COMPLETE KIT FOR MANUAL POWDER APPLICATION The Inocart VT manual powder application kit is ideal for the even application of powders such as polyester, epoxy or acrylic, which are delivered in 20 kg cartons. * Constant and even spraying ensuring smooth and uniform painting, * A well-balanced gun that is comfortable to use, * TEC5 technology ensuring high quality of painting finish, * 3 factory settings for quick commissioning, * 99 client settings, * Inobox height adjustment for comfortable work with the control, * Strong cascade ensuring the effect of powder curling around the detail, * High transfer efficiency minimizing the painting time, * Advanced HV control for perfect coverage of hard-to-reach parts, * Powder flow rate adjustment, Ljdohd Nraepfx Aanohr * Stepless electric vibrating table, * Self-locking hook for gun and pump maintenance during cleaning, * Footrest for easy carrying of the Inocart device, * Unbeatable cascade lifetime, * Monitoring of wear parts for replacement in the right time. CHOOSE BUMEX SP. Z O.O. Very high quality of the machines offered on the market. Professional advice and service. Guarantee. Warranty and post-warranty service. Full technical documentation. 100% satisfaction of our clients. All products of the brand BUMEX SP. Z O.O. have WE certificate. We offer our own transport - prices are agreed each time for a given offer. We issue VAT invoices. Short lead times! Possibility to order machines in various, personalized configurations and dimensions! Please do not hesitate to contact us.

Condition: excellent (used), Liebisch Type: S 1000 A-TR / 42016211 Chest-mounted units with a 1000-liter test chamber volume for salt spray testing. Constamatic® TR This series includes automatically controlled chest-mounted units of type A-TR. The internal controls are operated via a touchscreen. All functions are displayed on a touchscreen with intuitive user guidance. Technical specifications: Device type: S 1000 A-TR External housing dimensions: (W x D x H in mm) 2600 x 1120 x 1210 Internal test chamber dimensions: (W x D x H in mm) 1535/1425 x 800/780 x 660/650 Max. sample holder load: 10 kg / level 10 kg Operating voltage: 230 V +6/-10% Power consumption S: 2700 W Humidity control range. S: up to / 70°C Test chamber control range K: up to / 50°C Test chamber control range S: up to / 50°C Frequency: 50/60 Hz Device fuse: 12 A Temperature control: PLC Overtemperature protection: yes Test chamber volume: 1000 liters Test solution storage capacity: approx. / 150 liters Test solution consumption per hour: approx. / 0.7 - 1.0 liters Water filling of base pan KON: 15 liters Weight: 450 kg Ledjwf Dh Nspfx Aanehr Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Here we offer you a Köhler salt spray chamber. Köhler Salt Spray Chamber Corrosion Chamber Köhler Salt Spray Chamber HKT 500 Operation via touch panel Inner dimensions W x D x H (without hood) 1880 x 840 x 1210 mm Test chamber volume 500 l Temperature range chamber room temp. up to 50°C Mains supply 230V 1P/N/50Hz 3000W Lhsdpsn Arqdjfx Aanjr Type: HKT 500 WTG 400 Kg Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), White Type: SC/KWT 450 Salt Spray Chamber Technical Specifications: Test chamber capacity: 450 liters Max. load: 100 kg Brine storage tank: 180 liters External dimensions: Height 920 mm, Width 1930 mm, Depth 800 mm Test chamber dimensions: Height 740 mm, Width 850 mm, Depth 570 mm Areas of application: Corrosion tests: Salt spray test: Room temperature up to +50°C Condensation test: Room temperature Up to +45°C Humidifier +75°C Temperature stability The temperature deviation over time is ± K. Voltage: 1/N/PE AC 230V ±10% 50Hz Rated power 2.0 kW, Rated current 8.7 A Combination: Lodpfxow Strco Aanshr Salt spray test SS: DIN 50021 Condensation test KFW: DIN 50017 Normal climate (ventilation): DIN 50014 Weight: 180 kg Condition: Used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Here we offer you a Mega Electronics conveyor spray processing machine. Mega Electronics Conveyor Spray Processing Machines Conveyor spray processing machines FAPC 3000 The new FAPC have been developed to be used with the latest development, Etching and abating chemistry for the production of printed circuits, metal signs and chemically milled metal components. The FAPC 3000 can accommodate panels up to 300 mm wide. Process chamber 450mm Water rinsing chamber 280mm Spray rods - Top 4 process chamber, 1 rinsing chamber Spray rods - floor 4 process chamber, 1 rinsing chamber Nozzle type Poly v-jet - 1/4 revolution removable Nozzles per pipe 3 + 4 for process, 4 for rinsing Nozzles Precisely mounted for perfect alignment. Adjustable, compact distribution systems. Flow control / pressure control Adjustable over the entire range from above and below. Conveyor speed control High torque. AC drive motor system, powered by a precision inverter with digital displays, for a precise operator reference Speed range 45 mm - 1.6 m / min Temperature range Ambient temperature up to 50°C -1°C Temperature Controller Digital Liquid level sensors For heating and pump Manual reset of overtemperature protection Voltage 220 / 240V 50Hz (13A plug) Dimensions: Lhedpjd R Trksfx Aansr Height 670mm Depth 670 mm Length 1430mm including collecting bowl Type: FAPC 3000 Condition: used / used Scope of delivery: (See picture) (Changes and Ir

Condition: excellent (used), Here we offer you a Köhler salt spray chamber. Salt spray chambers: diverse testing possibilities from salt spray test to fully automatic alternating test Ledjnr Hi Sopfx Aanohr easy operation by graphical menu guidance customized versions for many applications easy operation via touch panel internal dimensions W x D x H (without hood) 1080 x 675 x 580 mm external dimensions W x D x H 1940 x 900 x 1220 mm Test chamber capacity 500 liters Chamber temperature Rt +5 - 60°C Humidifier temperature Rt +5 - 75°C Mains connection 230V 1P 50/60Hz 2000W Compressed air 4,5 - 8.0 bar / 3Nm³/h Brine supply 140 liters Stainless steel version Refurbished and converted to Comfort control - Renewal of all electrical components - Renewal of all hose connections Type: HK 500 400 Kg Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: good (used), Köhler Type: HKS 1500 The Köhler HKS 1500 salt spray chamber is an industrial testing device designed for corrosion testing according to international standards such as ISO 9227 (NSS, AASS, CASS). It is primarily used in the automotive and metalworking industries to test the resistance of materials and coatings to corrosive environments. Technical Features Model: Köhler HKS 1500 Test Volume: Approx. 1000 liters Chamber Type: Front- or Top-Loading Control: Touch panel for easy operation Temperature Range: Room temperature to approx. 50 °C Materials: Corrosion-resistant interior lining, e.g. B. Polypropylene Lodpewit Ersfx Aanjhr Standards: DIN EN ISO 9227, VDA 233-102, DIN EN ISO 11997-3 This chamber enables both conventional salt spray tests and cyclic corrosion tests and can be individually adapted to specific testing requirements. Technical specifications for the salt spray cabinet: Test chamber material: Polypropylene RT - + 55°C Test chamber temperature range/salt spraying Heating/salt spraying indirectly via chamber walls Temperature range - condensate RT - + 50°C Temperature range - humidifier RT - + 75°C Heating indirectly via the test chamber walls. Temperature stability +/- 1.0 K Digital temperature control, resolution 0.1 °C (on plain text display) Digital control, heating circuit via electronic relay without power disturbances Saline supply: approx. 200 hours of continuous spraying or external Saline supply: automatic humidifier filling Fog generation: dual-fluid nozzle made of acrylic glass Air flow rate: 3.0 m³/h Precipitation rate controlled by electronic dosing pump Dimensions: Inside: Width 1030 mm, Depth 880 mm, Height 1100 mm Outside: Width 1200 mm, Depth 1000 mm, Height 2080 mm Electrical connection: Nominal voltage: 400V 3P/N 50Hz Pmax: 9800W Connected load: 3.0 KVA (salt spraying) (condensation) 2.0 KVA Compressed air connection Min. 4.5 bar, max. 8.0 bar Water connection (deionized water): Min. 2.0 bar, max. 6.0 bar Disposal: Mist outlet NW 32, Condensate outlet NW 32 Weight: 450 kg Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: good (used), VLM Type: V.745.672.120 Model CC 1000-FL HL Corrosion test chamber for salt spray tests Specifications: Test chamber volume: approx. 1000 L Test chamber dimensions (ΒχΤχΗ1/Η2): 1400x800x800/1020 mm Door opening dimensions (WxH): 1300x680 mm External housing dimensions втн: 2162 x 995 x 2080 mm Operating temperature range: 5°C > room temperature to +80°C High-load version for loads up to 350 kg Process control: Beckhoff PLC, color touch screen display display, 50 memory locations for test procedures, 50 Memory locations for test segments, ramps: Humidity-temperature over the entire working range, Ether connection Electrical connection: 400 V, 50 Hz, 5700 W Tap water: min. 2.5 bar Tap connection 3/4" External thread for connecting an ion exchanger cartridge Compressed air: 7-8 bar Waste water: Siphon / 30 mm ID hose nozzle Exhaust air: pipe end OD 75 mm Operating systems: Salt spray Condensation water (CWC) Ventilation Room air Warm air Controlled humidity Lhedpfx Aaet Igc Sjnjr

Condition: excellent (used), Type: SWT 200/400-S Weiss Spray and Splash Water Test Cabinet Used to test water ingress into enclosures. In combination with a timer, the test cycle can be automated with an adjustable test duration from 3 seconds to 30 hours. Complies with DIN VDE 0470 T1 and EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated recirculation system reduces water consumption to a minimum. Features - Glass door with wiper - Pneumatic drive for the oscillating pipe - Adjustable oscillation angle - Interchangeable oscillating pipes - Swivel and interchangeable nozzle holders - Adjustable and measurable water flow rate - Test duration control Data for mechanical load: - Max. load with test specimens (evenly distributed): Permissible total weight for specimen carrier: 25 kg - Spray radius: 200 mm / 400 mm Data for IP protection class tests - Oscillation speed approx. 60°/s - Oscillation angle IPX3 approx. ±60° - Oscillation angle IPX4 approx. ±180° -10° Dimensions: - External dimensions with control cabinet (D x W x H): approx. 1000 x 1350 x 1900 mm - External dimensions (D x W x H): approx. 1000 x 1000 x 1900 mm - Internal dimensions (D x W x H): 400 x 650 x 750 mm Operating data: - Voltage: 3/N/PE AC 400V ±10% 50Hz - Rated power: 1.5 kW - Rated current: 6.0 A Lodpfxexg Hrko Aanohr - Weight: 375 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See picture) (Technical data subject to change and errors excepted!) Further questions can be answered by phone.