Used Alfa Laval Decanters for sale (92)

Condition: used, functionality: fully functional, Item: DP-6833-LKP-L-LobePump Lsdpfx Adsxuqanswsrg Alfa Laval Rotary Lobe Pump Type: LKP-L6246 Stainless Steel, Acid-Resistant Pump Type: LKP-L6246 Motor: 7.5 kW 1455 RPM 2 identical units available Alfa Laval Lobe Pump Assembly – Technical Summary Drive Configuration Motor Brand: ABB Model: 3GAA132-114 Power: 7.5 kW Speed: 1455 rpm (50 Hz) Voltage: 400 V / 3-phase Protection Class: IP55 Insulation Class: F Power Factor (Cos φ): 0.82 Gearbox Manufacturer: Benzlers (Made in Sweden) Model: BC247-03 Gear Ratio: 4.21 : 1 Output Speed: 1455 / 4.21 ≈ 346 rpm Oil Type: BP GR-XP 220 Mounting Arrangement: IM B3 (horizontal, foot-mounted) Pump Section Manufacturer: Alfa Laval (Made in England, Eastbourne plant) Type: Rotary Lobe Pump (LKP-L6246 designation on pump casing) Connection: 4” sanitary fitting (inlet/outlet) Material: Stainless steel (acid-resistant) Typical Displacement: 1.5–2.0 L/rev (for 4” lobe size) Performance Data (Estimates) - Pump speed (post-gearbox): ~346 rpm (from 4.21:1 ratio) - Theoretical capacity: 31–41 m³/h (based on 1.5–2.0 L/rev) - Working pressure range: up to approx. 5–6 bar (limited by 7.5 kW drive) - Motor mechanical output (efficiency ≈0.85): approx. 6.4 kW available for pumping - Shaft power/torque: approx. 177 Nm at 346 rpm Ready for delivery!

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 0 h, Item: A-11778-Pipe-Exchanger Stainless Steel Exchanger Type PVE 3300 Lodpfx Aoqt Eimodwjrg Max. Temperature:

Condition: new, Year of construction: 2022, functionality: fully functional, Item: A-Aalborg-Micro AALBORG MICRO Lodpfx Asqy Nv Redwjrg The Aalborg Micro is a compact exhaust gas heat exchanger/steam generator, designed for waste heat recovery from gas/MDO/HFO engines and gas turbines. As a heat exchanger, the Aalborg Micro offers a wide range of opportunities, due to the fact that hot water, TEG and TFO can all be used as media. Furthermore the Aalborg Micro can be used as a steam generator. A cylindrical unit in the center with an integrated regulation damper allows up to 80% of the exhaust gas to bypass the heating surface. The heating surface can be cleaned easily via optional soot blower rings using compressed air/steam/water, and/or by a pyrolysis process in dry-run mode

Condition: used, Year of construction: 1994, System: Decanter / centrifuge, used Lodpfx Adsvz Dddjwjrg Manufacturer: Alfa Laval Model: ALDEC 406 Mach. No. 512-0006.01 Year of manufacture 1994 Maximum drum speed 4000 l/min Drum inner diameter

Condition: used, System: Mobile dewatering system, decanter, and mobile centrifuge - used Application: Sludge dewatering Type: Alfa Laval DSNX 4250 Year of manufacture: 1996 Lrjdpfx Aswmwrqjdwjg Operating hours: 29,200 Generator operating hours: 31,640 (see enclosed nameplate)

Condition: used, System: Decanter Type: Alfa Laval DSNX 4250 Year of manufacture: 1995 Lrodjvz Rwkjpfx Adwsg Speed: 2950 rpm Gearbox: 2.71 Separation technology: Sludge dewatering using decanting centrifuges (solid bowl screw centrifuges, decanters). The high centrifugal forces separate the fine solids from the suspension due to different densities.

Condition: used, Year of construction: 1996, Item: AL-010188-Alfa Laval Separator MRPX314HGV-74C Alfa Laval MRPX 314 HGV-74C Milk Clarifier Separator Pre-owned Alfa Laval MRPX 314 HGV-74C self-cleaning clarifier separator in stainless steel construction. Manufactured by Alfa Laval Separation A/S, Søborg, Denmark. Complete unit in good used condition – ideal for clarification of milk or other low-solids dairy liquids. Technical Details Type: MRPX 314 HGV-74C Manufacturing No.: 2969923 Product No.: 881007-01-00 Bowl speed: approx. 8,000 rpm Lsdjxqqqlspfx Adwjrg Drive motor: approx. 11 kW Operation: self-cleaning (automatic sludge discharge) Material: acid-resistant stainless steel (AISI 316 L) Bowl volume: approx. 6 L Capacity: up to 10,000 L/h for milk clarification Design: hermetic bottom feed with paring-disc liquid outlet Features • Continuous separation of milk and whey with minimal product loss • Gentle, hermetic feed system – prevents air entrainment and foaming • Automatic solids discharge system • Includes complete bowl assembly: - Top Part No.: 538544-80 - Bowl No.: 537872-80 - Bottom Part No.: 537503-64 Condition Machine disassembled, cleaned, and stored indoors in Denmark. Available for inspection by appointment. Price Price on request (EXW Denmark)

Condition: used, GENERAL INFORMATION Heat exchange surface: 2.45 m² Outer diameter: 640 mm Total height: 650 mm Insulation: present Other: Permissible operating temperature: 200°C Channel A: Volume: 12 liters Permissible operating overpressure: -1/+5 bar Lrsdpfx Adjxqck Deweg Gap width: 6 mm Medium: Sludge Channel B: Volume: 15 liters Permissible operating overpressure: 5 bar Gap width: 8 mm Medium: Chilled water Heat exchange surface material: 1.4404 (V4A) Location: Bremen Nameplate: Condition: used Last application: Pharmaceutical chemistry INSULATION Insulation jacket material: Aluminum

Condition: used, GENERAL Exchange surface: 1.3 m² Outer diameter: 620 mm Insulation: available Other information: Permitted operating temperature: 200°C Channel A: Volume: 7 liters Permitted operating overpressure: -1/+5 bar Gap width: 5 mm Medium: LM.C Channel B: Lredsxqckkjpfx Adwjg Volume: 7 liters Permitted operating overpressure: 5 bar Gap width: 5 mm Medium: Glyko 50 Heat transfer surface material: 1.4404 (V4A) Insulation jackets partially incomplete Connections partially cut off (see photos) Location: Bremen Technical documentation: drawing Nameplate: Condition: used Last application: pharmaceutical chemistry INSULATION Insulation material: Armaflex Insulation jacket material: aluminium

Condition: used, GENERAL Exchange surface: 1.3 m² Total height: 1,000 mm Insulation: present Other: Permissible operating temperature: 200° C Channel A: Volume: 7 liters Permissible operating overpressure: -1/+5 bar Gap width: 5 mm Medium: LMF Channel B: Volume: 7 liters Permissible operating overpressure: 5 bar Gap width: 5 mm Lredsxqci Hepfx Adwsg Medium: Glyko 50 Heat exchange surface material: 1.4404 (V4A) Connections partially cut off (see photos) Location: Bremen Technical documentation: drawing Nameplate: Condition: used Last field of application: Pharmaceutical chemistry INSULATION Insulation material: Armaflex Insulation jacket material: aluminium

Condition: used, tank capacity: 1,500 l, GENERAL Features: Evacuation/Aeration, butterfly valve Design: vertical Remarks: Height-adjustable cap screws for the feet are missing; hand lever for the butterfly valve is missing; manway cover is not suitable for an operating pressure of 2 bar (the tank was most likely operated unpressurized by the previous owner and thus the cover was replaced accordingly) Outer diameter: 1,300 mm Inner diameter: 1,150 mm Total height: 2,700 mm Heating/Cooling: present Insulation: present Max. permissible operating temperature: 20 °C Max. permissible operating overpressure: 3.0 bar Max. overpressure: 2.0 bar Agitator: agitator flange Support type: feet Location: Bremen Cylinder temperature control: half-pipe coil Nameplate: Volume: 1,500 litres Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 1,550 mm Last application: dairy TANK Max. operating temperature tank / °C: 120 °C Bottom: flat bottom with slope Number of feet: 3 units HEATING/COOLING JACKET Bottom temperature control: Thermoplate INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel FEATURES Manway / dome: on top (Ø 430) Lrodpfxoxqa Ite Adwjg Outlet: DN65 DIN 11851 Note: dents on the insulation jacket, functionality of the double jacket not tested MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) Feet material: stainless steel AGITATOR Agitator arrangement: off-centre on top

Condition: used, ALFA LAVAL Separator Type: MRPX 318 HGV-74C / 88-1005-01-00 Manufacturing No.: 2969862 Worm Wheel Shaft: 1420–1500 rpm Tachometer: 1420–1500 rpm Revolution Counter: 110–125 rpm Alfa Laval MRPX 318 HGV-74C self-cleaning hermetic separator, complete stainless steel unit in good condition (dismantled). Manufacturing No.: 2969862 Product No.: 88-1005-01-00 Technical Details: - Bowl diameter: approx. 318 mm - Speed: approx. 8,000 rpm - Motor: approx. 22 kW Ledpfsxqm Rnox Adwjrg - Capacity: approx. 15,000 – 25,000 L/h (depending on product) - Worm wheel shaft: 1420–1500 rpm - Tachometer: 1420–1500 rpm - Revolution counter: 110–125 rpm - Self-discharging (HGV type) Ideal for milk, whey, juice, or other liquid-solid separation in the dairy or food industry. Clean, complete machine ready for operation or integration into a production line. Location: Denmark Condition: Used / tested Price: Upon request Inspection: Possible by prior arrangement

Condition: used, Year of construction: 1994, functionality: fully functional, Item: AS-10177 – Alfa Laval Decanter For sale: Used, 5× Alfa Laval Decanter Centrifuges NX 418 S-31G (Year 1994) with valve and piping modules Manufacturer: Alfa Laval Separation A/S (Søborg, Denmark) Model: Alfa Laval Decanter Centrifuge – Type NX 418S-31HS Description: High-quality Alfa Laval decanter centrifuge, manufactured in Denmark. Complete unit includes Flender / ATB Loher 37 kW main drive motor, electrical control cabinet, stainless steel base frame, and integrated pipework. Equipment is in very clean condition, previously used in food processing applications. Technical data: - Manufacturer: Alfa Laval Separation A/S, Denmark - Model: NX 418S-31HS - Construction: Stainless steel - Main drive: Flender / ATB Loher, 37 kW, 1470 rpm, 380 V, IP55 - Drive: Belt-driven main motor - Mounting: Stainless steel base frame - Control: Electrical control panels and valve system included - Condition: Used, in very good working order Performance / Capacity: - Dairy / whey / milk solids: 5,000 – 10,000 L/h - Food / beverage (juice, yeast, starch): 6,000 – 12,000 L/h Ledpjxqga Asfx Adwerg - Industrial / sludge applications: 3 – 8 m³/h (dependent on solids content) - Bowl diameter: 418 mm - Bowl speed: up to approx. 4,000 rpm - Max G-force: approx. 4,000 × g Applications: Ideal for dairy, food, beverage, starch, chemical, and industrial wastewater separation processes. Location: Denmark Price: On request Package Options: - Available as a complete line (5 × decanters + 5 × valve sections) - Or sold individually with corresponding valve section Storage location: Denmark, ready for loading. Export documentation and transport can be arranged.

Condition: excellent (used), functionality: fully functional, Manifold with Alfa Laval valves and regulators Valve manufacturer: Alfa Laval Number of valves: 24 units Number of regulators: 16 units Set dimensions: 1900 mm × 1300 mm × 1300 mm A valve manifold consisting of 24 Alfa Laval valves and 16 flow regulators. This advanced process array is designed for precise control of liquid flow in high-capacity technological systems. The entire assembly is made of stainless steel, ensuring high durability, corrosion resistance, and suitability for operation in applications requiring full hygiene. Lrsdpfx Adoxvi Akoweg Alfa Laval valves and regulators guarantee reliability and compliance with the requirements of the food, dairy, brewery, and pharmaceutical industries. The system can be easily integrated into existing process automation, enabling real-time control of flow, pressure, and medium direction. Applications: - Processing lines for the food, dairy, and brewery industries - CIP/SIP systems (cleaning and sterilization-in-place) - Beverage, beer, and liquid food production installations - Distribution and mixing systems for technological media

Condition: excellent (used), functionality: fully functional, Alfa Laval manifold with valves and regulators Valve manufacturer: Alfa Laval Number of valves: 14 pcs Number of regulators: 8 pcs Set dimensions: 1050 mm × 1000 mm × 1250 mm Lrsdpfx Adexvi Adsweg The manifold (valve cluster) is equipped with 14 Alfa Laval valves and 8 flow regulators, designed for use in process installations requiring high levels of hygiene and precise flow control. The unit is constructed entirely from stainless steel, ensuring corrosion resistance and ease of cleaning. Alfa Laval valves are recognized as a standard in the food and pharmaceutical industries – known for their durability, tightness, and ease of operation. The integrated regulators enable accurate control of pressure and flow rate, allowing the manifold to be seamlessly integrated with advanced process automation systems. Applications: - Process installations in the food and dairy industry - Production lines in breweries, bottling plants, and processing facilities - CIP/SIP systems (cleaning and sterilization in place) - Dosing and distribution systems for process media

Condition: excellent (used), functionality: fully functional, Manifold with Alfa Laval Valves and Regulators Valve manufacturer: Alfa Laval Number of valves: 11 pieces Number of regulators: 6 pieces Set dimensions: 800 mm × 550 mm × 1200 mm Ljdpfx Adexviz Tjwjrg The manifold (valve assembly) is equipped with 11 Alfa Laval valves and 6 flow regulators. The unit is made of stainless steel, designed for use in hygienic process installations such as the food, dairy, brewing, or pharmaceutical industries. Alfa Laval valves are renowned for their high reliability, precision operation, and ease of maintenance. The integrated regulators allow for precise control of pressure or media flow, ensuring efficient and safe operation of the entire system. Applications: - Production lines in the food and beverage industry - CIP / SIP systems (Cleaning and Sterilization in Place) - Process installations in dairy plants and breweries - Flow control systems for process liquids

Condition: excellent (used), functionality: fully functional, Manifold with Alfa Laval and Nocado valves Valve manufacturer: Alfa Laval, Nocado Number of valves: 20 pieces Set dimensions: 1300 mm × 800 mm × 850 mm Manifold (valve assembly) built with high-quality Alfa Laval and Nocado valves, designed for precise control of liquid flow in process installations. The system is intended for use in the food, dairy, brewery, and pharmaceutical industries, where hygiene, reliability, and easy cleaning (CIP) are required. Valves made of stainless steel ensure corrosion resistance, long service life, and safe operation in sanitary conditions. The compact design enables easy integration with existing production lines. Applications: Lodpfx Adjxvizyswerg - Food and beverage installations - Production lines in the dairy industry - CIP / SIP systems - Flow control in process systems

Condition: good (used), Year of construction: 2015, functionality: fully functional, coolant tank capacity: 1,200 l, We are selling 2 x 1200L insulated cooling tanks with steering system and CIP functions. The tanks has been used to store our microalgae in our production processes. Both tanks are working very well. Lsdpfxjxykmxo Adwsrg

Condition: excellent (used), functionality: fully functional, Milk Reception Station with Alfa Laval Manifold Equipped with Two Centrifugal Pumps Manufacturer: Alfa Laval Application: Milk reception section / product distribution manifold Complete milk reception station with Alfa Laval manifold, equipped with two centrifugal pumps and a stainless steel working platform with stairs. The system is designed for hygienic transport and distribution of milk or other food-grade liquids in dairy processing facilities. Main components of the installation: 1. Alfa Laval centrifugal pump, type: LKH-50 Serial number: 252968 Year of manufacture: 2020 Dimensions: 650 × 360 × 530 mm 2. Alfa Laval centrifugal pump, type: LKH PRIME 40 Serial number: 253012 Year of manufacture: 2020 Dimensions: 1000 × 500 × 600 mm This is a self-priming pump designed for CIP applications and for transferring liquids containing air. 3. Alfa Laval milk manifold with multiple valves Valve types: LKLA-T NC and Unique Overall dimensions: 6000 × 4320 × 1500 mm Includes: control cabinet, dimensions: 800 × 350 × 1250 mm The system allows fully automatic switching of product and CIP flows during milk reception and distribution processes. 4. Stainless steel working platform with stairs Working height: 1550 mm Overall dimensions: 2150 × 1000 × 2600 mm Facilitates operation of manifold valves and components The Alfa Laval Manifold Milk Reception Station is a modern and hygienic process solution equipped with: - two Alfa Laval centrifugal pumps (LKH and LKH PRIME), - valve manifold with LKLA-T NC and Unique valves, - service platform with stairs, and a control cabinet. Lodpfx Adjxtvhzoworg The system is designed for precise management of product flow and CIP media in dairy and food processing installations.

Condition: excellent (used), functionality: fully functional, Alfa Laval / Tetra Pak Buttermilk Pasteurization Line Complete buttermilk pasteurization line from renowned manufacturers Alfa Laval and Tetra Pak, equipped with a buffer tank, circulation pumps, process valves, flowmeter, and control cabinet. The system is designed for hygienic thermal processing of buttermilk in dairy plants. Capacity: 25,000 liters/hour Main components of the line: 1. Siersma Scheffers Stainless Steel Buffer Tank Serial number: Karnemelk Year of manufacture: 1995 Capacity: 1,000 liters Overall dimensions: Ø 1100 × 3000 mm Material: stainless steel (s/s) 2. APV Valves (4 units) High-quality process valves for food applications 3. Pomac Centrifugal Pump, type: CP19555 / 165 x 10 Serial number: 20080 Year of manufacture: 2007 Capacity: 30 m³/h Power: 5.5 kW Dimensions: 700 × 350 × 450 mm Lsdpfxsxtvfts Adwjrg 4. Endress + Hauser Flowmeter, model: Promag H / Promag 300 Dimensions: 350 × 200 × 200 mm Provides precise measurement of liquid food products 5. Samson Valve Dimensions: 560 × 300 × 300 mm Application: flow and pressure regulation in process systems 6. Alfa Laval / Tetra Pak Buttermilk Pasteurizer, type: C8-K8M Serial number: 30107-33855 Year of manufacture: 2012 Capacity: 559 liters Operating parameters: PS: 16.0 bar PT: 22.9 bar TS: 120 °C Dimensions: 3200 × 550 × 1850 mm High-performance heat exchanger system optimized for buttermilk processing 7. Hovap Centrifugal Pump, type: HP-5032/170 Serial number: 33740 Capacity: 35 m³/h Power: 7.5 kW Dimensions: 700 × 320 × 550 mm 8. IPBE Control Cabinet (s/s) Purpose: control and supervision of the buttermilk pasteurization line Dimensions: 620 × 230 × 770 mm The Alfa Laval / Tetra Pak buttermilk pasteurization line with a throughput of up to 25,000 l/h is a complete, integrated system for the thermal processing of dairy products. Use of components from Alfa Laval, Tetra Pak, Pomac, Hovap, Endress + Hauser, and APV ensures high reliability, durability, and process quality.

Condition: excellent (used), functionality: fully functional, Alfa Laval / Tetra Pak Cream Pasteurization Line Alfa Laval / Tetra Pak Cream Pasteurization Line | Piston Pump, Buffer Tank, Flowmeter, Pasteurizer Complete cream pasteurization line from renowned manufacturers Alfa Laval and Tetra Pak, equipped with high-quality pumps, valves, flowmeters, and control cabinets. The line is designed for hygienic and efficient cream pasteurization in the dairy industry. Capacity: 35,000 liters/hour Lsdpfx Adjxtu Ugewsrg Main components of the line: 1. Circumferential Piston Pump Manufacturer: Alfa Laval Type: DURACIRC 73 Serial Number: E256143 Year of Manufacture: 2021 Dimensions: 1600 × 600 × 800 mm Included: various valves and stainless steel filter housing 2. Stainless Steel Buffer Tank Tank dimensions: Ø 1100 × 1700 mm Total dimensions: Ø 1200 × 2900 mm 3. Alfa Laval Valves, Type: Unique SSV (6 pcs.) High-quality single seat valves for food applications 4. Flowmeter Manufacturer: Endress + Hauser Model: Promag P / Promag P Dimensions: 200 × 200 × 350 mm High-precision flow measurement for food-grade liquids 5. Centrifugal Pump Manufacturer: LKM Type: LKH 20/155 Power: 5.5 kW Production Number: 20-02319 Dimensions: 700 × 380 × 400 mm Stainless steel construction, suitable for CIP operation 6. Valve Manufacturer: Armaturen AG Type: MA9.31A6 5S Po Dimensions: 600 × 400 × 400 mm 7. Cream Pasteurizer Manufacturer: Alfa Laval / Tetra Pak Type: C10-SH Serial Number: 30104-38526 Year of Manufacture: 2003 Capacity: 1311 liters Operating parameters: Operating pressure (PS): 0 / 20.0 bar Test pressure (PT): 28.6 bar Temperature range (TS): 0 / 130 °C Dimensions: 5000 × 800 × 2200 mm High-efficiency heat exchanger system ensuring stable pasteurization 8. Centrifugal Pump Manufacturer: Pomac Type: CP29068/230 X 15 Serial Number: 22 818 Year of Manufacture: 12/2011 Capacity: 45 m³/h Power: 15.0 kW Dimensions: 950 × 400 × 500 mm 9. Nocado Valves (5 pcs.) Process valves for food applications 10. Control Cabinets Manufacturer: Eldon and IPBE Dimensions: 400 × 230 × 770 mm 1000 × 300 × 1000 mm The Alfa Laval / Tetra Pak Cream Pasteurization Line is a complete industrial solution with a capacity of up to 35,000 l/h, designed for high hygiene, precise process parameter control, and maximum reliability. Ideal for dairies, cream and milk fat producers.

Condition: excellent (used), functionality: fully functional, usable tank capacity: 60,000 l, total height: 11,500 mm, inner diameter: 2,900 mm, outer diameter: 3,000 mm, wall material: stainless steel, Agitator Tank made of Stainless Steel (V2A), Insulated (Milk Tank) Technical Data / Dimensions Available quantity: 5 Volume: approx. 60,000 liters Tank type: Agitator tank Condition: used Food-grade: yes Design: vertical Internal diameter: approx. 2,900 mm External diameter: approx. 3,000 mm Cylindrical height: approx. 8,100 mm Total height: approx. 11,500 mm Specific gravity of medium: 1.0 t/m³ Operating pressure: non-pressurized Operating temperature: 40°C Notes: former milk storage tank Material / Construction Lsdpfx Aoxw Rrpsdwerg Internal shell material: V2A (1.4301) Foot material: stainless steel Internal weld seams: ground smooth Insulation Insulation thickness: approx. 50 mm Insulation material: PU foam Insulation shell material: stainless steel Insulation shell: diffusion-tight welded Notes: The insulation shell of the tank has some minor dents which do not affect its functionality. Equipment Support design: foot ring / support skirt Mounting: fixed Top head: conical Cone angle: approx. 15% Bottom head: conical Top head features: 1 x vent hood with mesh 1 x CIP nozzle 1 x threaded socket for level limit measurement 2 x lifting lugs Shell features: 1 x oval manway, swing-type (approx. 340 x 440 mm) 1 x oval manway (approx. 340 x 440 mm, in support skirt) 1 x agitator flange with agitator 1 x threaded nozzle for temperature measurement Bottom head features: 1 x threaded nozzle for temperature measurement 1 x nozzle for level limit measurement 1 x residue drain Notes: The connection configurations differ slightly between the 5 tanks Agitator Agitator included Type: propeller Classification: high-speed Quantity: 1 Mounting position: lateral Speed: 940 rpm Agitator power: 2.2 kW Impeller length: approx. 600 mm Manufacturer: Stelzer Notes: Some agitators supplied with stainless steel cover

Year of construction: 2014, condition: used, One-stage plate heat exchanger for cooling cast-out wort. Additional title: Plate heat exchanger Lrjdpfx Adexbpn Dewjg Capacity: 1200 hl/h one stage process for wort 15°Plato / water Heating transfer surface: 260 m² Operating pressure: 10 bar Systemic volume: 653 Liter Length: 2400 mm Width: 910 mm Height: 2400 mm Weight: 2448 kg Material: Alloy 316 ( = 1.4404 ), thickness 0,5 mm, sealing material NBRP

Condition: excellent (used), Water evaporator heat exchanger Lredpfx Asxxccpedwjg

Year of construction: 2008, condition: like new (used), We sell a package of 26 cooling systems - Alfa Laval brand evaporators, all of which work on the glycol cooling system. The systems are powered at 220V or 380V or have an interchangeable power supply system according to the user's needs. The year of manufacture of the systems is 2008. Lrsdpfx Aog N Db Hodweg We can sell also piece by piece not only as a package upon request. Commercial unit coolers designed for use in small and medium cold rooms from 10 up to 400 m³. Models designed for easy maintenance with immediate access to inspection areas. This series is available as a DX evaporator and brine unit cooler. Finned coil - H(C)FC Inner grooved Cu tubing ø 12 mm, triangular tube pitch - Brine Smooth Cu tubing ø 12 mm, triangular tube pitch - Corrugated Alu-fins - Fin spacings 4, 5.5, 6, 7, 8, 10 and 11 mm. • 1 to 4 AC fans, ø 250 mm up to ø 500 mm, drawing through the coil. Fan motors 230V/50-60Hz/1ph or 400V/50-60Hz/3ph in two noise levels (H/L). Motors with dynamically and statically balanced external rotors, manufactured in accordance with VDE 0530/12.84. • Corrosion resistant materials: coil frame AluZinc, casing strong and durable sheet metal, powder-coated RAL 9002. • Hinged drip tray and side covers for easy installation and maintenance. • Sufficient space for mounting of expansion valve inside the casing. • Mounting brackets allow flush ceiling mounting. • Fitted with schräder valve on the suction connection for testing purposes. • Pumped system available on request. • Stickers indicate fan direction and refrigerant in/out. • Delivery in mounting position. Coolers are mounted on wooden beams. Installation can take place with the use of a forklift. 1 AlfaCubic series (BL, GL, RL) 2 Refrigerant system (E = dry expansion, W=water/glycol, 3 Noise level (H=high, L=low) 4 Fan diameter (25=250, 35=350, 40=400, 50=500 mm) 5 Number of fans (1 to 4) 6 No. of tube rows (A=4, B=6, C=8) 7 Phases (S= single-phase, D= 3 phases Δ connection) 8 Motor voltage (230V, 400V) 9 No. of circuits 10 Packing (CR=crate) 11 Casing material (AP= powder coated, SS= stainless steel) 12 Defrost system (A= air, E= electric defrost, HG= hotgas) 13 Fin material/coating (AL=aluminium, EP= epoxy coated aluminium) 14 Fin spacing (4, 5.5, 6, 7, 8, 10 and 11 mm) 15 Tube material (Cu=copper) The evaporator coils of these units are high performance and are built-in 1/2 ”fluted copper tube and fin corrugated aluminium with gaps of 3.5, 6 and 8mm. The frame, made of aluminium sheet, is provided with protection collars. This frame has the application of thermostatic expansion valves. Regarding their exterior structure, they are manufactured in aluminium painted in high resistance RAL-9018 polyester colour. The vibrations in these machines are avoided thanks to the fact that their entire structure is compact and highly rigid. All its parts are easily removable for maintenance. These evaporators are fitted as standard with helical fans with high-performance protection grilles and are equipped with 315 or 350mm motors. diameter. Single-phase for 230V 50Hz, with a degree of protection IP-54, with external rotor and low consumption. All motors are connected to a watertight general box, according to IP-55 regulations. Finally, defrosting is carried out with 230V electric heaters built in armoured stainless steel tubes. Its vulcanized ends avoid derivations and are inserted inside the battery and the tray. They are connected to a watertight junction box. Application: Lo