Used Angle Table for sale (21,559)

Condition: excellent (used), Catalogue number: 7791 TECHNICAL SPECIFICATIONS - max diameter of main blade with scorer: 350mm - max cutting height: 105mm - main blade adjustable up/down + tilt - spindle diameter: 30mm - spindle lock - with sliding table - cutting length on the sliding table: 1430mm - cutting width at rip fence: 1000mm - with side table - with scorer - max scorer diameter: 80mm - scorer spindle diameter: 20mm - main motor: 5.5kW - extraction port diameter: 100mm Ppsdoxpvk Iepfx Afhjl - table dimension: 115x625mm - table size with extension and widening: 2150x1105mm - blade guard - 3 blade speeds: 3200/4500/6000rpm - dimensions (L/W/H): 2300x3350x1520mm - weight: 746kg Net price: 11,900 PLN Net price: 2,830 EUR (based on exchange rate 4.2 EUR) (Prices may vary due to significant exchange rate fluctuations)

Condition: excellent (used), Year of construction: 2014, I sell the format sliding table saw without scoring KUSING FPn MINI 1000 Year 2014. Sliding table length 1000mm / cutting length 1200mm. Max. cutting width on cross fence 1950 / 2850mm. Ppodpjyc N Dcsfx Afhsl Max. cutting width on parallel fence 1270mm. Motor 4,0 kW (5,5 HP). Max. saw blade diameter fi.300x30mm Main blade 4000 rpm. Saw aggregate tilting 0-45° EU-Product. Made in Slovakia. Fully working, including CE and full Documentation. Condition very good. Avialable immediately.

Condition: new, Year of construction: 2018, Automatic L-sealer Manufacturer: Diez Model: AWS4535 Year of manufacture: 2018 No operating hours! Ppedpfx Aowriuuefhol Welding frame: 500 x 350 mm Belt width: 32 mm External dimensions: 170 x 130 x 135 cm

Year of construction: 2018, condition: good (used), Fully automatic L-sealer / Fully automatic side sealing machine Manufacturer: Diez Model: AWS-C 9070 CS Year of manufacture: 2018 Shrink tunnel Manufacturer: Diez Model: HTC 122-40D Year of manufacture: 2018 Operator side: On the left in the direction of travel Pass-through width: approx. 600 mm Pass-through height: approx. 190 mm Sealing length: approx. 900 mm Working height / conveyor height infeed-outfeed: approx. 860 mm +100 Performance: Up to 30 cycles/min (depending on package size and feed speed) Connection voltage: 230V AC, 50Hz, 1 Ph + N + PE Power consumption: 3.5 KW Rated current: 10 A With cable and 16A Schuko plug Compressed air connection: 6 bar External dimensions: Length: 2600 mm Width: 2000 mm Height: 1500 mm 21126ä Pedpstzcd Ssfx Afhspl

Condition: excellent (used), functionality: fully functional, Griggio T2000 spindle moulder with sliding table Spindle diameter: 40 mm Total spindle height: 140 mm Variable spindle speed via belt pulleys Ppsdpfxsx Srlio Afhel Spindle speeds: 3000/4400/6000/7000/10000 Main motor power: 4 kW Manual spindle lift Longitudinal sliding table integrated into the worktop

Condition: used, Year of construction: 2000, overall weight: 260 kg, table diameter: 70 mm, Rotary Table Table diameter 250 mm Spindle bore Ø 70 mm Weight 260 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Pedpfx Afjyddivehjpl Feel free to view our other advertisements for a complete overview of our stock.

Condition: excellent (used), Panel – sliding table saw SCM class px 350i, cutting length 320 cm, tilt angle of unit 0–45 degrees, max. blade diameter 350 mm, max. cutting height 105 mm, max. cutting height at tilt 72 mm, cutting width on rear fences 1300 mm, motor 5.5 kW, saw blade speed – 4000 rpm, fixture for angle cutting, Ppsdpfx Afsyf H Tgehol machine in very good condition, possibility to test prior to purchase.

Condition: good (used), Clamping table, clamping angle, dividing head, dividing head, rotary table, milling machine table, rotary indexing table, rotary table -Rotary table: Turntable -Hole: Ø 32 mm Psdeycfyajpfx Afhopl -Dimensions: 320/280/H75 mm -Weight: 13.3 kg

Condition: used, Year of construction: 1996, Carriage length: 2800 mm Anodised version (new carriage) Motor 7.5 kW Automatic contactor control Digital speed display Cutting width 1000 mm Table extension 800 mm Location: Nattheim Ppsdjyapv Tjpfx Afhol

Condition: used, Year of construction: 2015, Stationary spindle moulder Table size: 1945 x 575 mm Max. spindle projection above table: 130 mm Usable spindle length: 100 mm Max. retractable tool diameter: 180 mm Spindle arbor diameter: 30 mm Spindle speeds: 3,500/7,000/10,000 rpm Motor power: 5 kW Weight: approx. 240 kg Extraction port diameter: 2x 120 mm Location: Nattheim Podpfx Asyapvtsfhopl

Year of construction: 2003, condition: used, functionality: fully functional, machine/vehicle number: SN.: 19-03-028, Granite sub-table with pneumatic level compensation, including subframe with 3 drawers, from Integrated Dynamics Engineering. Year of manufacture: 2003. Serial no.: 19-03-028. Length: 80 cm, width: 80 cm, height: 86 cm including subframe. Ppsdpfx Afeya Dttjhol

Condition: new, Year of construction: 2026, This machine can be used for drilling, reaming and boring holes up to 45/40 mm in cast iron, threading up to M12 mm bolts, up to 80 mm milliAutomatic X-axis feed designed for milling and drilling machines: ZX7032G, ZX7045, ZX7045 DRO, ZX7045B1, ZX7045B1 DRO, ZX7045 BXL, ZX7045 BXL DRO, ZX7055, ZX7055 DRO. Mechanical Table Feed for Milling Machines: A Tool for Precision Machining Our mechanical table feed is an essential accessory for workshops and professional machining facilities. With horizontal mounting, the unit ensures stability and precision during a wide range of milling operations. It is an ideal solution for both hobbyists and professional users, offering smooth speed adjustment and rapid feed, allowing flexible adaptation to different materials and machining tasks. Invest in our mechanical table feed and unlock new possibilities in precision material machining. For both craft enthusiasts and professionals, this is a tool that meets the highest expectations on every project. Manufacturer: Cormakg and up to 22 mm notching. It is also useful for cutting and frontal milling. ZX 7045 B1 is by default equipped with an autofed spindle and a cooling system. Base available optionally. Rigid, sturdy cast iron Autofed spindle Milling machine height adjusted on the support, not on the column Additional flood coolant system Rigid cross table with precisely ground surface Pedpfx Aoyct Aiefhspl Dovetail-shaped guides Quiet work due to the ground gears Left/right rotation +/- 90° rotary head Adjustable head height Base available optionally Technical data Steel drilling efficiency 32 mm Cast iron drilling efficiency 45 mm Frontal mill diameter 80 mm Arbor mill diameter 28 mm Spindle speed 50–3024 rpm (6/12) Arbor chuck MK4 Spindle feed 110 mm (automatic feed) Worktable dimensions 820 mm×240 mm Maximum distance from spindle to table 475 mm X-axis longitudinal travel 550 mm Y-axis transverse travel 170 mm Left/right rotary head 90° Motor power 1.3/1.8 kW Power supply 400V Weight 360 kg

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Double table machining center Working range X 2,590 mm Working range Y 2,260 mm Ppsdpfxsuqw E Ns Afhol Working range Z 400 mm Number of milling spindles 2 Liquid-cooled spindle Main motor 19.2 kW Max rotational speed 24,000 rpm Aggregate heads 4 C-axis Tool clamping system HSK-F63 Tool change positions central magazine 24 Tool change on each head from 12 positions Boring heads vert. 20 (for each head) Horizontal boring heads X 8 Horizontal boring heads Y 8 Blade for grooves in X, in Y 2 Platens Number 4 360 m³/h vacuum pumps T Jet system for chip blowing Nesting Manual labeling Bar code reader Tool length measurement Software BIESSE BIESSEWORKS ADVANCED, BIESSE B_NEST Weight 17,900 kg

Condition: good (used), Year of construction: 1990, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,120 mm, travel distance Z-axis: 1,250 mm, table load: 3,000 kg, spindle diameter: 100 mm, table length: 1,500 mm, table width: 1,500 mm, feed rate X-axis: 2,800 m/min, feed rate Y-axis: 2,800 m/min, feed rate Z-axis: 2,800 m/min, rotational speed (min.): 1,120 rpm, Table type boring mill TOS VARNSDORF - W100A MACH-ID 9351 Make: TOS VARNSDORF Type: W100A Year: 1990 3 axis TESLA NS 114  digital read out Tailstock Face plate 800 mm Distance faceplate to boring bar rest 2800 mm Max. diameter off facing 900 mm Under power inspection possible X - Travel: 1600mm Y - Travel: 1120mm Z - Travel: 1250mm W - Travel: 900mm Table Length: 1500mm Table Width: 1500mm Table load: 3000 Speeds / ranges:1120Rpm Power: 11kW Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis:2800mm/min. Podpfx Asycvc Sofhjpl Feed rate Y-Axis:2800mm/min. Feed rate Z-Axis:2800mm/min. Feed rate W-Axis:2800mm/min. Length: 6710mm Width: 3000mm Height: 3000mm Weight: 14000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), CATALOG NUMBER 7513 Technical specifications: - Max main saw blade diameter – without scoring unit: 400 mm - max cutting height: 120 mm - Max main saw blade diameter – with scoring unit: 300 mm - max cutting height: 70 mm - Blade bore diameter: 30 mm - Scoring spindle saw blade diameter: 100 mm - Scoring spindle end diameter: 20 mm - Main blade adjustable up/down - Blade guard - Spindle lock - Sliding table length: 2600 mm - Cutting width at fence: 900 mm - With side table - Main motor power: 5.5 kW – Scoring spindle motor power: 0.75 kW - 2 rotation speeds - Table dimensions: 1200 x 700 mm - Extraction port diameter: 100 mm - Dimensions (L/W/H): 2600 x 3300 x 1100 mm - Weight: 790 kg ADVANTAGES – German manufacture – Used saw, in very good condition Net price: 9500 PLN Net price: 2260 EUR (depending on exchange rate 4.2 EUR) Pedpfsx S Ndvjx Afhepl (Prices may change with greater fluctuations)

Condition: new, CATALOG NUMBER RE036 2 axes – electric control for main saw blade lift and tilt with electronic display for height and angle, control panel integrated into the machine body – Brand new, ex-demo machine – DTR + CE documentation included – Cutting width at fence: 1300 mm – Main motor power: 6 kW TECHNICAL DATA - Saw blade tilting: 0-46° - Main motor power: 6 kW - Cutting length on sliding table: 3000 mm - Main spindle speed: 3500/4500 rpm - Spindle diameter: 30 mm - Main blade diameter: 300-400 mm - Max scoring saw diameter: 125 mm - Scoring motor power: 0.75 kW Ppsdpfx Ajx S I Srjfhjl - Scoring saw speed: 8500 rpm - Scoring spindle diameter: 20 mm - Cutting width at fence (standard 1050 mm): 1300 mm - Sawing width using end stops on auxiliary table: 215-3200 mm - Cutting height for 300 mm blade 90°/45°: 90/60 mm - Cutting height for 350 mm blade 90°/45°: 5-115/3.5-80 mm - Cutting height for 400 mm blade 90°/45°: 25-140/15.5-95 mm - Extraction port diameter: 80 mm, 125 mm - Dimensions (L/W/H): 3300/3460/1500 mm - Weight: 750 kg Optional equipment: – Angle fence – with aluminum bar Net price: 47,000 PLN Net price: 11,300 EUR (based on exchange rate of 4.15 EUR) (Prices may vary with significant exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7394 TECHNICAL DATA - max main blade diameter: 380mm - max cutting height: 110mm - main blade height adjustable up/down - spindle diameter: 30mm - spindle lock - with sliding table - cutting length on sliding table: 2560mm - cutting width at rip fence: 810mm - with side table - main motor: 5.5kW - table dimensions: 1250x730mm - blade guard included - overall dimensions (L/W/H): 2580x2570x1050mm - weight: 780kg ADVANTAGES – German-made – Used saw, very good condition Podpfx Aox S I Rhofhepl Net price: 7900 PLN Net price: 1880 EUR (based on 4.2 EUR rate) (Prices may change with significant currency fluctuations)

Condition: used, Year of construction: 1981, Table size: 1200 x 1000 mm Table height: 850 mm Swivel range: -5° to +45° Spindle speeds: 3000/4000/5000/6000/8000/10000 rpm Height adjustment: 120 mm Tool holder: MK5 incl. integral fence Weight: approx. 1000 kg Storage location: Supplier Ppedpfjx It Ausx Afhel

Condition: excellent (used), Year of construction: 1983, Used machine M.Nr. V130296 Year of manufacture: 1983 Motor data: 380 V - 50 Hz - 13 A Rigid 30 mm spindle Height adjustment via handwheel Forward/reverse operation Extraction ports: 1 x 140 mm - 1 x 100 mm Max. cutter: 250 mm diameter - Max. slotting tool: 400 mm diameter Speed: 3000/4500/6000/9000 rpm Table length: 1200 mm Table dimensions: 900 mm x 280 mm Weight approx.: 950 kg Haffner 3-roller feed Top milling fence with fine adjustment Ppjdpfxjyb T T Es Afhsl External dimensions W/D/H approx.: 1250/1200/1400 mm Location: ex stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 1996, total length: 3,900 mm, total width: 2,100 mm, total height: 1,520 mm, - Year: 1996 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: V233567 - Roller table length [mm]: 3200 - Table width [mm]: 1300 - Min. saw blade diameter [mm]: 200 - Max. saw blade diameter [mm]: 450 - Arbor saw blade diameter [mm]: 30 - Dust extraction nozzle diameter [mm]: 120 Pjdpfx Afsxdlx Rehspl - Options: Scoring unit - └ Pre-cutter saw blade diameter [mm]: 120 - └ Arbor pre-cutter saw blade diameter [mm]: 22 - Spindle speed: - └ Min. spindle speed [rpm]: 2800 - └ Max. spindle speed [rpm]: 5500 - Voltage [V]: 400 - Current consumption [A]: 13 - Fuse [A]: 16 - Transport dimensions: 3900mm x 2100mm x 1520mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), SCM TF130 Class Spindle Moulder Long tables with extension Table length: 253 cm Spindle diameter: 30 mm 5.5 kW motor with brake Left/right spindle rotation 5 spindle speeds Pedpoydvtyjfx Afhspl Spindle lock Machine is in very good condition.

Condition: used, Year of construction: 2011, functionality: fully functional, overall weight: 1,800 kg, We offer this used INTERMAC GENIUS CT-RS CNC glass cutting table, year of construction 2011. Ppedpjydlgiofx Afhsl

Condition: good (used), Table size: - horizontal: 500 x 600 mm - vertical: 310 x 600 mm Tiltable: 90° Dimensions LxWxH, approx.: 700 x 520 x 520 mm Weight, approx.: 280 kg Item no.: WW12214 Pjdpfxsd Ttico Afhepl

Condition: good (used), Hello, For sale: RF-50/1250 radial drilling machine. The machine is in working condition, currently in continuous operation, and can be inspected and tested on site. Ppedpfsxykctox Afhsl The price listed in the advertisement is net and VAT must be added. The machine can be viewed in Starachowice at 13 Kwiatkowskiego Street. Telephone contact available from 7:00 to 16:00.

Condition: used, Hydraulic lifting table with driven rollers max load 4000 Kg 1.4m wide 5.5m long Ppjdpjycl Htofx Afhel