Used Tilt Table for sale (47,421)

Condition: used, Univ. Swivel-Tilting-Rotary Table, presumably DECKEL Universal accessory table for tool milling machines Machine No.: 33.04.07 Univ. Table No.: 09.01 Table size: 700 x 400 mm T-slot width: 12 mm T-slot spacing: 45 mm Mounting plate: Width 550 mm x Height 300/240 mm - Table plate with 8x T-slots 12 mm - Table plate can rotate 360° with 7.5° index, swing-away worm for direct dividing - Hand crank with indexing plate and sector arm, built-in division plate 16-30-33-36-39-51-57-63 - +/- 45° tiltable to either side - 15° forward downward tilt, 45° upward forward tilt Hodpfx Aoh Ecm Ioabjfn Weight: 260 kg In good condition

Year of construction: 1987, condition: used, machine/vehicle number: 6489; Lg-Nr. 13105, Technical data: - max. load capacity 3000 kg Hfodpfsbp Ddzox Aabon - Face plate cross 1600 x 1600 mm - Cross face extension tubes - face plate cross mot. swivelling 0 - 90 / 135 ° - rotation infinitely variable 0,01 - 4 rpm - right - + left rotation controllable - Welding current transmission approx. 500 A - Drive 400 V - Table height in horizontal position without underframe approx. 1200 mm - Table height in horizontal position with underframe approx. 2200 mm - Space requirement approx. W 1600 x H 1200 + 1000 x D 2400 mm - Weight approx. 2700 kg

Condition: good (used), Manufacturer: WMW Hedpfx Ajuan Rmjabjfn Machine type: FUW 200/1 WMW Auerbach Machine number: Type / Model: Turn-tilt-swivel table Table top: 540 x 245 mm Clamping surface: 460 x 175 mm Stop surface: 290 x 195 mm Slot width: mm Groove spacing: mm Table cross adjustment: 135 mm Equipment: rotatable, tiltable and swiveling Condition: good Weight: 80 kg Dimensions: 550 x 500 x 300 mm

Condition: good (used), Year of construction: 1988, functionality: fully functional, power: 0.37 kW (0.50 HP), Lisec titl table for line outbound transportation (i.e. to a KFL horizontal glass transport table). The table is for connecting to a FPL flat press or FPS gas filling press (or similar from another brand) Hsdpfx Ajrvxbieabsfn

Condition: good (used), Year of construction: 1972, Length: 16500mm Width: 2100mm Hsdpfx Ajwry Iljabofn Height: 2100mm Weight: 0kg

Condition: used, Year of construction: 1985, Universal turn & tilt table from MAHO 800 Hedpfx Aajb I Irwobefn with mechanical y-adjustment via hand wheel

Condition: used, Universal swivel-tilt-rotary table DECKEL type FVW, suitable for FP 2 or FP 3 (Deckel no. 62473). Table size: 700 x 240 mm. Swivel range: +/- 30° in all directions. Weight: approx. 90 kg. Hodpoxcilrefx Aabefn

Year of construction: 1990, condition: used, machine/vehicle number: xxxx; Lg-Nr. 17250, Technical data: -Load capacity 200 kg -Throat depth 800 mm -Working height in horizontal position approx. 1000 mm -Mot boom. left + right swivel - arm arm manually Tiltable -Mot face plates. left + right rotatable - faceplate speed infinitely variable - faceplate diameter 300 mm - adjustable control panel with control make ESAB, - type 6 PTF, BJ. 97 - space requirement approx. B 1100 x H 1300 x T 1600 mm -Weight approx. 300 kg Hfjdpfxsdd Ilxo Aabjn

Condition: like new (used), functionality: fully functional, Unused tilting and swivel table Hodpfxor Nd Ngo Aabofn with rotary dividing table Suitable for FP 4 lid

Condition: new, Year of construction: 2023, Hydraulic height adjustable rotary tilt table Maximum load: 1.000kg Faceplate diameter: 850 mm Speed of face plate: 0,05- 1,0 rpm length / width: 1.800mm / 1.450mm Height faceplate horizontal: 800mm - 1.275mm Hsdpfx Ash T Dafsabofn height faceplate vertical: 625mm - 1.100mm Operating devices: 2-pedal foot switch/ turn LEFT/ RIGHT hand-held remote control: Turn LEFT/RIGHT/STOP, speed controller (potentiometer) for stepless speed control, pushbutton tilt FORWARD/BACK, pushbutton lift UP/DOWN Operation at the control cabinet: Pushbutton "DEVICE ON Selector switch "MANUAL/FOOT OPERATION Main switch "ON/OFF

Condition: good (used), Year of construction: 2012, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, spindle speed (max.): 14,000 rpm, Manufacturer: KOIKE Type: HD 100 VF Year of construction: 2012 Double driven and double geared Remote control with inverter and vario speeds Tilting 0 - 135 gr Specifications Metric US Standard Table length 1220 mm Table width 1220 mm Table load on 50 mm 5000 Table load to 200 mm 4545 Table load to 400 mm 3500 Table load to 600 mm 2900 Table load to 1,000 mm 1850 Table rotation 360 ° Dimensions (estimate) Hsdpfxorg A N Ns Aabjfn length 2000 mm width 1600 mm height 1700 mm weight 2400 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: new, Year of construction: 2024, functionality: fully functional, load capacity: 3,000 kg, faceplate diameter: 1,020 mm, welding current (max.): 600 A, swivel angle A-axis (max.): 135 °, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Load capacity: 3,000 kg Center of gravity distance / Eccentricity: 150 mm / 150 mm Maximum tilt angle: 135° Tilt speed: 60 s Rotation speed: 0.033 – 0.66 rpm Hodpfx Ajwbqmdjabofn Dimensions of faceplate Height of top edge of faceplate (horizontal): 797 – 1,820 mm Height of faceplate rotation axis (vertical): 850 – 1,650 mm Diameter of faceplate: 1,020 mm Grooves on faceplate: 4 × 18 mm Operation Handheld remote control: Robust industrial handheld remote control with all operating functions MACHINE DETAILS Weight: 1,800 kg Installation dimensions: 2,100 × 1,300 × 1,050 mm Electrical Specifications Max. welding current: 600 A Input voltage: 380 – 400 V / 3 Ph / 50 – 60 Hz Dimensions as per sketch Total height (maximum): ~2072 mm Maximum height of the center of the axis: ~1472 mm Minimum height of the center of the axis: 650 mm Distance from floor to table top edge: 797 mm Distance from table top edge to center of the axis: 147 mm Rear foot height: 100 mm Outer diameter of rotary table: Ø1200 mm Pitch circle diameter (PCD): Ø489 mm Number of mounting holes: 4 x M16 thread Angle segments on rotary table: 120°, 45° EQUIPMENT - Industrial handheld remote control

Condition: used, Welding turntable - tilting turntable with hydraulic tilting motion Welding positioner with faceplate Hfjdpfx Aaopy Uz Debsn PROTARC - ZAAR & Co. Model PF-DF 3000 Serial No. 3620 Year of manufacture: 1985 Load capacity: 3,000 kg Faceplate size: Ø 1100 mm (950 x 950 mm) Faceplate rotation speed: 0.05 - 1.25 rpm Minimum speed: 1 revolution in 10 minutes (tested) Maximum speed: 1.25 revolutions in 1 minute (tested) Table tilt range: 0 - 110° Table height vertical: 1,180 mm Table height horizontal: 940 mm Welding current transmission: 800 Amp. Table drive motor power: 2.2 kW Hydraulic motor power: 1.1 kW Power supply: 380 Volt, 50 Hz - Manual control switch for faceplate rotation direction and table speed - Foot switch for clockwise/counter-clockwise rotation and stop - Hydraulic tilting function with 2 hydraulic cylinders - Speed control via frequency inverter Required space (L x W x H): 1,700 x 1,400 x 1,180 mm Weight: 1,600 kg Very good condition

Condition: good (used), Year of construction: 1980, Offer 24518 Technical data: - Load capacity 150 kg - Cross supports + mounting bolts - Height of mounting bolt in horizontal position 1350 mm - Diameter of mounting bolt 55 mm - Rotation continuously adjustable - Right-hand and left-hand rotation - Drive 400 V / 3.0 kW - Height of mounting bolt in horizontal position 1350 mm - Space requirement approx. W 600 x D 1200 x H 1350 mm Hedpovtnyyjfx Aabofn - Weight approx. 150 kg .

Condition: used, Univ. swivel-tilt-rotary table Add-on table for Univ. tool milling machine Hsdpfogp T D Nsx Aabofn table size 630 x 250 mm Groove width 14 mm Rotatable and tiltable +/- 30 Swiveling +/-45 - 4x T-slot Weight approx. 120 kg

Condition: used, Universal swivel, tilting, and rotary table DECKEL Universal add-on table for tool milling machines suitable for FP 2L, FP 3L, or FP 4L No. 2314 Year of manufacture: approx. 1975 Clamping surface: 1000 x 520 mm - 6 clamping slots, 16 mm, spacing 90 mm - Clamping plate can be rotated horizontally to the right and left up to 45 degrees, with scale Hfsdpfjd E A I Njx Aabsn - Can be tilted to/from the machine +/- 15 degrees - Swivel range +/- 15 degrees - Swivel table, tilting table, angle table Permissible load max. 1000 kg Weight: 400 kg Good condition

Year of construction: 1999, condition: excellent (used), Glass tilting and transport table TRIULZI-IG Hfsdpfx Aoiy Dtboaben Hydraulic With castor rollers Rollers are moving down for 360 degree glass movement (for sealing) 3600 mm length and 2400 mm working height Good working order Good condition As is Available immediately

Condition: used, Pneumatic tilting roller table 1500x2000x900mm Pneumatically tiltable roller table, stand. Hsdpfx Aaouglrzjbefn Size: 1500 x 200 x 900mm The height of the table in the open state: 1850 mm

Condition: new, Year of construction: 2025, Martin panel saw T 66 Cutting height: 155 mm Saw blade diameter: 450 mm Swivelling: one-sided Hfedpfx Aaev Erkajben Drive power: 5.5 KW Edging table length: 3.0 m Cutting width: 1350 mm Parallel stop via handwheel Standard cross table for length stop for angle cuts Length stop analogue with continuous system Table extension at the rear T66 T6615/2-a Drive power 5.5 KW T6630/3-a Edge table length 3.0 m T 6635/3-a Cutting width 1350 mm T 6641-a Parallel stop moved via handwheel T6660/1-a Standard cross table for angle cuts T 6670-a Length stop analogue T 6680/1-a Table extension at the rear Location: from stock 54634 Bitburg - available immediately - Some of the pictures show options that are not included in the offer.

Condition: new, Year of construction: 2024, load capacity: 3,000 kg, Equipment: foot remote control, 3000 kg load capacity welding rotary table, very robust Speed continuously adjustable from 0.05 to 0.7 rpm Rotary table diameter 1400mm Inclination up to 120° Height horizontal 1300mm, tilted to the middle 1050mm Length 2.0 m x width 1.4 m Hfedpfev En U Ijx Aabjn Handheld remote control with digital display and double foot remote control

Year of construction: 1980, condition: reconditioned (used), Universal - swivel - tilting table for MAHO MH 1000 Hfjdpefx Aipjfx Aabjn clamping surface: 1050 mm x 630 mm The universal - swivel - tilting table is in a good condition !

Condition: good (used), Table with grinding device (edge delamination) and two integrated breaking strips. Width: 3700 mm Depth: 2430 mm Height: 970 mm Weight approx. 1500 kg Hsdpfxoxnl Sfe Aabofn

Condition: good (used), Table size: - horizontal: 500 x 600 mm - vertical: 310 x 600 mm Hfodpfx Aaod Tticjbjn Tiltable: 90° Dimensions LxWxH, approx.: 700 x 520 x 520 mm Weight, approx.: 280 kg Item no.: WW12214

Condition: used, machine/vehicle number: 2414-0075 bzw. 2314-0703, table clamping surface: 520 x 1000 mm 6 clamping grooves: 16 mm groove spacing: 90 mm Clamping plate horizontally rotatable to the right and left by: 45° each tiltable from/to the machine by: 15° each Hsdpfx Aeb Hmbpsabsfn swivelling to the right and left: 15° each permissible load movable approx.: 1000 kg permissible load rigid table approx.: 1500 kg weight: 376 kg Suitable for milling machines DECKEL: FP 3 L; FP 3 LG; FP 3 LV

Condition: excellent (used), Year of construction: 2022, Casadei Panel Saw Xenia 40, Year 2022 Robust steel and cast-iron construction ensures precision, smooth running, and durability Smooth-operating, precise sliding table made of anodized aluminum with a proven and long-lasting ball-contact system on hardened guides – 10-year warranty on wear of the carbide guide rails Six-year HOLZKRAFT warranty on wear of the tilting segments of the saw unit Cast-iron saw table Large support surfaces thanks to standard table extension and table widening Fold-down rip fence, manually adjustable with fine adjustment Hfsdpfx Aajxac R Aobsn Angle-adjustable crosscut fence, extendable up to 3200 mm, with two flip stops Outrigger with material support roller TECHNICAL DATA Dimensions and Weights Weight (net) approx. 661 kg Extraction Connection Extraction port diameter: 120 mm Extraction port diameter (saw blade guard): 80 mm Setup Information Transport width: 1,150 mm Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Scoring motor power: 0.9 kW Output power (motor): 7.0 kW Duty cycle drive motor: S6 Duty cycle duration drive motor: 40% Sliding Table and Table Crosscut frame length: 3,200 mm Saw Unit Cutting width with rip fence: 1,270 mm Max. crosscut width to the left of the saw blade: 3,200 mm Saw blade tilt: 90 - 45° Max. cutting height at 90°: 140 mm Max. cutting height at 45°: 99 mm Saw blade diameter: 400 mm Saw blade speed: 3,700 rpm Scoring Unit Scoring blade diameter: 120 mm Scoring blade speed: 8,500 rpm FEATURES Equipment Scoring unit Anodised aluminum sliding table Handle for sliding table Material roller on crosscut frame Saw rip fence with round bar guide Stops: professional flip stops Table widening Table extension Saw blade pendulum guard Location: ex stock 54634 Bitburg - Immediately available -