Used Anvil for sale (38)

Year of construction: 2022, condition: new, The semi-automatic Pneumatico PT-2800 table is ideal for the production of different sizes of pallets. Its construction allows for quick and easy change of dimensions of the pallets to be assembled, thus enabling the production of short series of packages. To operate the table, one operator is needed, who is able to pile from 180 to 210 pallets in an 8-hour shift (depending on the operator's skills and work organization). Two nailers with nails of different lengths are suspended on two spring balancers, which ensures more ergonomic work. Pneumatic clamps position blocks and square timber in the right place, which translates into higher quality and repeatability of a given pallet size. Pneumatic lifting of the pallet makes the whole process less tiring for the operator. Bedpfx Asht E T Rjpredc • Work ergonomics: from 180 to 210 pallets within 8 hours of one operator's work • Compact design: the table surface is only 4.94 m² (53.17 ft²) • Versatility: the adjustable worktop enables the production of EUR pallets, 2, 3, 4 or 5 pallets brackets or squared timber • Time saving: quick conversion to a different pallet size • Pneumatic clamp: possibility of precise centering of the blocks • Pneumatic ejection of the pallet: to relieve the muscular system of the operator • Mast with balancers: smooth movement of the nails during operation • Additional template: the possibility of producing "bottoms" of the pallets • Adjustable steel anvils: bending smooth nails in the production of pallets • Innovation: the table diagonal adjustment module shortens the work by 50%; Dimensions of produced pallets: • Width: 900 - 2800 mm • Length: 1500 mm

Condition: ready for operation (used), Romanian Forging Hammer CM 2500 (The hammer is similar to Huta Zygmunt MPM 6300B) - Maximum impact energy at full stroke: 7000 kgm - Ram weight: 2500 kg - Mode of operation: pneumatic - Ram stroke: 850 mm - Number of blows per minute: 100 - Working pressure: 5–7 bar - Anvil weight: 48 t - Total weight: 65 t Romanian Forging Hammer CM 1250 (The hammer is similar to Huta Zygmunt MPM 3150B) - Maximum impact energy at full stroke: 3600 kgm - Ram weight: 1250 kg - Mode of operation: pneumatic - Table size (front to back): 700 mm - Stroke: 800 mm - Number of blows per minute: 110 - Working pressure: 5–7 bar - Max. upper die weight: 400 kg - Die height: 220 mm - Ram (front to back): 500 mm - Air consumption: 15 m³/min - Anvil weight: 24 t - Height of machine above floor: 3750 mm Bjdpew Sdxasfx Aprodc - Total machine height: 4380 mm - Total weight: 35 t

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, overall weight: 1,00,000 kg, workpiece weight (max.): 18 kg, Forging hammer HUTA ZIGMUNT type MPM 3000 Bsdpfx Aolnllbspredc The same type as MPM 10000 Energy of blow: 10 000 kgm Ram weight: 3 570 kg. Max. ram stroke: 1 000 mm Number of strokes per minute: 90 Total weight: 100 ton Anvil weight: 70 ton The hammer is equipped with modern CNC lubricating unit and set of anti-vibration pads. AHAT SK Ltd., Bulgaria +359 889 433449

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, product width (max.): 433 mm, working width: 430 mm, • 8 UV printing units • 2 rotary top loading die-cutting units • Waste shaft with additional pressure roller • GEW UV curing system • 2 additional hot air curing units • Sensotec printing register system • Insetting system • Cooled anvil drums • 2 rail-mounted cold foiling or laminating sections with interchangeable positions • Aditional Oil-heated rotary Hot-foil unit • Belt Conveyor for sheet output • Automatic sheet collection and stacking table/elevator • Splise recognition sensor • Web breakage sensor • End of the roll sensor • Erhardt+Leimer Web guiding system • TekNek web cleaning unit • Slitting knives Bdsdpfx Apsymr Sqjrec • Rotary Embossing Cylinder 31 anilox roller 550 aluminium printing cylinders 13 magnetic cylinders 3 cross cutting cylinders

Condition: like new (used), Year of construction: 2019, Ref: 11072 . 2019 Horizon RD-4055 Dual Cylinder Rotary Die Cut System Like new, ex demo condition - ONLY 5,000 on the counter! Efficient production with new separator and card stacker for labour saving operation. Features: Bjdeymmqzjpfx Aprjdc • Die cutting, waste separation and stacking in one pass for efficient production. • A wide range of applications can be processed such as business cards, greeting cards, labels and light packages. • Maximum 6,000 sheets can be processed. • 21-up round corner business card production can processed at 126,000 cards per hour. • Simple and easy operation without relying on a skilled operator. • Uniquely designed servo motor controlled ‘Repeat-cut’ feature allows multiple-up cuts from a single up die to minimize die cost. • Ruggedly constructed yet compact compared to normal die cutters. • Various delivery options are available to process a wide range of applications. • Die-cutting and Kiss cutting can be performed simultaneously by using a die which has two different blade heights, ideal for making stickers and labels. • Creasing can be achieved to avoid image cracking. Suitable for boxes, pocket folders and greeting cards which require additional folding processes after die cutting. • Repeat-cut enables the running of multiple up imposed applications with a smaller die to reduce die cost (Up to 8 repeats) Equipped with: TOUCH PANEL: Both setup and control can be done through the intuitive touch screen. After mounting the upper and lower die, the system can be set up by simply inputting sheet size and product size. The graphical illustrations on the screen are simple and easy to understand. FEED SECTION: Vacuum belt feeding enables superior feeding with easy setup and operation. An ultrasonic sensor is used for double feed detection on a wide range of substrates. The optional code reader BR-N4055 enables job separation for easy handling. TRANSPORT SECTION: Sheets are registered by vacuum belt and position is firmly secured with gripper rollers for accurate and consistent register. Servo motor driven gripper rollers ensure the die cut position without effecting processing speed. The optional alignment detection sensor ADS-N4055 detects the alignment error for additional quality control. DIE CUTTING SECTION: Rigid magnetic upper roller and solid lower anvil cylinder ensure high quality die cutting. Uniquely designed die cutting section enables easy and quick die setting. Specification: Sheet Size (Before processing): Max. W400 x L550 mm or W15.740" x L21.650" Min. W200 x L275 mm or W7.875” x L10.830” Processed Material: Normal paper, Coated paper, Cardboard Material Thickness: 127.9 to 400 gsm Die Cutting: Max. 0.5 mm or 0.019” (In case of blade height: 0.8 mm or 0.031”) Max. 0.3 mm or 0.011” (In case of blade height: 0.6 mm or 0.023”) Creasing: Max. 0.4 mm or 0.015” (In case of blade height: 0.8 mm or 0.031”)

Condition: as good as new (ex-display), functionality: fully functional, power: 19 kW (25.83 HP), fuel type: diesel, fuel tank capacity: 20 l, color: orange, overall weight: 2,300 kg, drive condition: 100 %, chain condition: 100 %, first registration: 06/2024, next inspection (TÜV): 06/2024, Year of construction: 2024, Equipment: rubber tracks, We are offering this display unit Bipromasz Kafar KB-2G pile driver, year of manufacture 2024. Manufacturer: Bipromasz Model: Kafar KB-2G Year of Manufacture: 2024 Condition: Display machine Type ID: 6/2024 Operating hours: 7 h Machine type: Pile driver, suitable for solar park construction, guardrail installation, fencing, foundation and piling works Designed for profiles / piles up to 5 m length Standard equipment: - 2 anvils - Mast tilt control / inclinometer for precise vertical alignment - Crawler undercarriage Bdodpfsyttqnox Aprjc Additional equipment (already installed): - Automatic mast plumb adjustment - Nitrogen hammer charging system Scope of delivery also includes: - Maintenance tools / basic equipment Optional accessories: A suitable transport trailer can be supplied on request. EU-wide sale possible. Intra-community delivery available. Location: Near Frankfurt am Main (Germany) Inspection by appointment. If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: used, Print roller, printer roller, spindle, anvil roller, pressure roller Bdsdpfsgprkuox Aprsc -Print roller: unfortunately no type designation -Technical dimensions: see photos -Dimensions: 295/100/H100 mm -Weight: 5.7 kg

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 0032703, Accessories: - Reference plate 63.3 HRC - Reference plate 58.5 HR30N Bdsdpfx Apjx E U U Hsrjc - Test weights 150, 100, 60, 45, 30 kgf - Preload weight - V-anvil - Spirit level - Diamond indenter - Steel ball indenter 1/8" - Steel replacement balls 1/8" - Dust cover - Operating manual The diamond indenter is slightly damaged below the tip (minor chipping – see photos).

Condition: good (used), MPS EF 410 - 8 color Label Printing Machine Ref.: FGT 25-230 We are pleased to present this 2008 MPS EF 410 - a high-precision, versatile UV flexo press designed for a wide range of applications. The MPS EF 410 model is a servo-driven, 410mm wide, multi-substrate press, capable of running self-adhesive materials as well as unsupported plastic films. With robust features and premium components, this machine is engineered for reliable, high-quality production. _____ Key Specifications & Configuration - Printing Width: 410 mm - Technology: Servo-driven UV flexo press - Substrate Handling: Spiral rollers and chill drums for multi-substrate versatility _____ Machine Features - Unwind Unit with Lift - Web Guide & Splice Table - Teknek Web Cleaner - 8 Flexo Printing Units for optimal color flexibility - Automatic Registration Control ensuring precise alignment - Delam/Relam with Web Turn Bars - enables printing of 2 colors on reverse side - Anti-Static Bars across the web path - 9 GEW UV Dryers providing efficient curing Bedpou Rdgbjfx Aprsdc _____ Enhanced Finishing Capabilities - Full Rail System allowing for tool movement along the press - Overlamination/Cold Foil with UV drying for premium effects - Double Die Station: o 1 x K&B Gapmaster Die for advanced control o 1 x Tecnocut Electronically Adjustable Anvil - Dual Web Inspection Cameras (Top & Bottom) - Razor Slitting for precise edge cutting - Waste Matrix Rewind and Product Rewind units _____ Additional Equipment & Accessories - Impression Cylinder Sets (x8): Sizes include 68, 72, 74, 77, 78, 80, 84, 88, 90, 93, 96, 99, 102, 104, 108, 114, 120, 128 - Magnetic Cylinders: Sizes include 136, 144, 148, 154, 160, 168, 176, 180, 93, 96, 99, 102, 104, 114, 120, 128 - 22 Anilox Rolls in various sizes for consistent ink distribution _____ Technical and Optical Condition: - Technical: 9/10 (checked and in excellent running condition) - Optical: 9/10 (cleaned and ready for immediate end-user deployment) _____

Year of construction: 2022, condition: good (used), Manufacturer / Model: Grafotronic DCL2 550 Serial Number: 220520G Web Width: 550 mm Year of Manufacture: Location: Germany Condition: Used – in production CE Marking: Yes _____ Main Configuration Unwinder Module: • Max. roll Ø 1000 mm / weight 430 kg • Ultrasonic sensor and web guide ±15 mm • Splice table with clamps, servo brake, reel lift Flexo Printing / Coating Module (10–24" repeat): • GEW E2C UV dryer • Ceramic anilox 400 l/cm – 5.5 cm³/m² • Stainless steel ink pan 1.2 L, reverse-angle doctor blade • Re-register drive for overprinting • Max. speed 100 m/min – tolerance ±0.1 mm Die-Cutting Module (10–24" repeat): • Servo register system, anvil & support roller • Contact matrix rewind, stripping bar • Delam/Relam before die-cutting (limit 70 m/min) • Max. speed 250 m/min, tolerance ±0.1 mm Inspection & Slitting Section: • Missing Label Detection (MLD) up to 220 m/min • Automatic Sci-Fi knife system (12 sets) • Vacuum edge-trim removal • Auto-set under/back scorer (2 knives) Semi-Automatic Turret Rewinder: • 2 × Ø 600 mm rolls • Semi-automatic cutting and push-out system • Label & meter counters • Core diameters 40–76 mm Additional Equipment: • Anti-static brush • Tablet with housing and accessories • ERP interface • Crane for magnetic cylinders Materials: • Foil 30–250 µm • Paper 100–250 µm _____ General Condition: Bsdpfx Apoxq A Hljrjdc Overall in good working order. According to the operator, two UV units require lamp replacement, which represents a minor cost. All other modules are fully functional.

Year of construction: 2023, condition: new, - modern ergonomic design - manual test with analogue Measuring Clock (Reading accuracy 0.2 HR) - easy to use and quick test process - Height Capacity approx. 185mm - Hepth Capacity approx. 160mm - Dimensions 545x182x755mm Test loads: 60 / 100 / 150kg Test method: HRA/HRB/HRC Standard delivery: - Hardness tester - V-Anvil - Flat Anvil Ø150mm Bedpfxepbbc Ho Apredc - Flat Anvil Ø50mm - Ball Indenter 1/16" with ball - Diamond indenter 120° Rockwell - Spindle protection - Accessory case

Year of construction: 2023, condition: like new (used), machine/vehicle number: 530211, Properties: → robust machine housing made of cast iron → automatic loading and unloading of the test force → change between lens and indenter automatically → LED lighting → digital measuring eyepiece → LCD color display touch screen → Conversion to other hardness scales (e.g. HRC) → easy to use Technical data: → Test loads in kg (0.3 / 0.5 / 1 / 3 / 5 / 10 / 20 / 30) → Test method Vickers → Eyepiece 10X → automatic Revolver → Objectives 10X / 20X / 40X → Test force application 50µm/sec → height Capacity max. 210mm → depth Capacity max.160mm → Conformity: DIN EN ISO 6507 / ASTM E-384 → Weight approx. 75kg → Power supply 230V / 50Hz Standard delivery: → Hardness tester → Diamond indenter 136° Vickers → Flat Anvil Ø80mm → V-Anvil Ø80mm → Eyepiece → Objectives 10X / 20X / 40X → LED lighting Bodpfsc Ipc Ujx Aprjdc → Power cable → Accessory case → Operating instructions OPTIONALS: → VMS3-Software (Video-Measuring-System) → X/Y-Stage 200x200mm (Movement 25 x 25mm) → Digital micrometer (to transmit the edge distance to the VMS3-Software) → “Automatic measurement” module (only in combination with VMS3-Software)

Year of construction: 2023, condition: like new (used), machine/vehicle number: 206RSD, Rockwell scales: HRC - HRA - HRD - HRB - HRF - HRG - HRL - HRM - HRR Standard delivery: - Hardness Tester - Protecction Guide for Indenter - Clamping Protrection - Diamond indenter 120° Rockwell - Ball holder with Ø1/16" ball - Flat Anvil Ø60mm - V-Anvil Ø60mm - Accessory box - Dust cover - User manual Bedpfsc In U Ijx Aprsdc