Used Blacksmiths Anvil for sale (49)

Condition: used, Year of construction: 1987, functionality: fully functional, overall weight: 5,000 kg, total width: 960 mm, total length: 1,860 mm, total height: 2,160 mm, Pneumatic Forging Hammer MA4132 – 160 kg Heavy-duty pneumatic forging hammer, believed to be model MA4132, manufactured in the USSR. The machine is complete with separate anvil/base and electric motor. Technical data: Falling parts weight: approx. 160 kg Main machine weight: approx. 3,700 kg Anvil/base weight: approx. 1,000 kg Electric motor weight: approx. 300 kg Total weight: approx. 5,000 kg Motor power: approx. 15 kW* Year of manufacture: believed to be 1987* Serial/identification marking on the machine: “87 №149” Location: Estonia Solid, heavy industrial forging hammer suitable for blacksmithing and forging work. The machine is sold as shown in the photos. Loading can be arranged by agreement. Inspection is possible by appointment. Isdpfjzxd E Sox Ahnetl More photos and video available on request. *Some technical specifications and year of manufacture are based on identification of the machine as MA4132 and should be considered approximate.

Condition: good (used), Year of construction: 2005, machine/vehicle number: 12345, functionality: fully functional, Used hydraulic forging hammer Itedozidv Sopfx Ahnol Manufacturer: LASCO Type: HOU 250 SO Year of manufacture: 2005 Impact energy 40 kJ, ram stroke 710 mm, ram weight 3,000 kg, machine foundation with spring damping elements, conveying system by STAHLMANN, two-module design, work platform, automatic feeding, infeed and outfeed, water cooling.

Condition: like new (used), anvil block for levelling of band saw blades, measures: 700 mm x 140 mm x 48 mm Itodsxtarwjpfx Ahnol

Condition: ready for operation (used), Anvil & Stand Length x Width x Height 1000x350x360 mm (dimensions of the anvil) Weight approx. 300 kg Itjdozcqpyspfx Ahnol Errors and omissions excepted.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 2278358, type of input current: AC, total height: 2,500 mm, total width: 3,000 mm, total length: 1,200 mm, overall weight: 900 kg, For sale is a SCHUNK Sonosystems LS-C 9 kW ultrasonic welding system in very good condition. The system was used exclusively for development and laboratory purposes and was not used in series production. Accordingly, the machine is in very good technical and optical condition and is almost like new. The LS-C is a universal ultrasonic welding system for joining copper and aluminum conductors with contact parts, busbars, and flat contacts. Due to its flexible system concept, it is particularly suitable for development departments, technical labs, prototype manufacturing, and small series applications. Technical data Manufacturer: SCHUNK Sonosystems GmbH Model: LS-C laboratory system Ultrasonic generator: 9 kW Frequency: 20 kHz Voltage supply: 3 × 400 V, 50/60 Hz Compressed air requirement: 6.5 bar Welding range: flexible Al conductors approx. 25–160 mm² and Cu conductors approx. 25–120 mm² (application-dependent) Equipment Dynamic process control Monitoring of welding height, energy, and welding time PC-based user interface with Windows system Memory for over 10,000 applications and process data sets Network capability and data export Soundproof enclosure Force sensor Universal anvil Welding pressure cylinder combination Ø 80 mm and Ø 125 mm Complete vibration system for 95 mm² Cu conductors Cable clamps and stranded wire end stop CE-compliant design Also included in the scope of delivery Tool set for 50 mm² conductors Tool set for 70 mm² conductors Condition The machine was used exclusively in development and laboratory operations and was not subjected to continuous production loads. Accordingly, the operating hours are low and the system is in very good condition. Application areas Development and prototype construction E-mobility and battery technology Cable assembly Laboratory and technical lab use Isdszzaxajpfx Ahnjtl Pre-series and small series production Inspection and functional demonstration possible by arrangement. Technical documentation and further images are available upon request.

Condition: used, Anvil with round and pointed horn Ijdpfezinw Hsx Ahnstl Anvil, North German design Track width: 140 mm Track length: 440 mm (with pointed horn) Horn length, round horn: approx. 200 mm Horn length, pointed horn: approx. 200 mm Overall length: 630 mm Height: 285 mm Foot: 290 x 210 mm - Steel casting, hardened - Square hole approx. 28 mm for anvil tools - Round hole, approx. 28 mm diameter Dimensions (L x W x H): 630 x 290 x 285 mm Anvil weight: 95 kg Good condition, very bright tone, good quality.

Condition: used, Anvil with round and square horn Standard anvil, Bohemian design Face width: 160 mm Face length: 530 mm Horn length: 250 mm Anvil weight: 190 kg Height: 350 mm Base: 430 x 310 mm - 28 mm square hole for anvil tools - Drop-forged, hardened Dimensions (L x W x H): 780 x 310 x 350 mm Anvil weight: 190 kg Itedeyk Hrmspfx Ahnsl Good condition, very bright ring, good quality

Condition: used, Anvil with round horn and rectangular horn Northern German style anvil Face width: 130 mm Face length: 630 mm (with pointed horn) Round horn length: approx. 200 mm Pointed horn length: approx. 220 mm Itjdpfx Aoy Ehycshnjl Overall length: 830 mm Height: 340 mm Foot with front anvil: 430 x 320 mm - Cast steel, hardened - Square hole approx. 28 mm for anvil tools - Round hole Ø approx. 23 mm Dimensions L x W x H: 830 x 320 x 340 mm Very bright ring, good quality

Condition: used, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting width (max.): 260 mm, Equipment: CE marking, HESKA HES 260 metal band saw – robust band saw for metalworking Iedpfxozwlhfs Ahnetl For sale is a used HESKA HES 260 metal band saw. The machine is ideally suited for cutting steel, stainless steel, aluminum, and other metal profiles, tubes, and solid materials. The HESKA HES 260 is characterized by its solid construction, reliable technology, and versatile applications. Thanks to its horizontal design, it is ideal for workshops, blacksmith shops, metal fabrication companies, and general mechanical engineering. Technical data: Manufacturer: HESKA Model: HES 260 Machine number: 23244 11 Machine type: Horizontal metal band saw Cutting range round/square at 90°: 260 mm, at 45° 160 mm Miter: right/left Band speed: 15-90 m/min Saw band: approx. 3,660 × 27 × 0.9 mm Coolant system: available Drive: approx. 0.6/0.8 kW Operating voltage: 400 V Dimensions: approx. 2000 x 1000 x 1200 mm (L x W x H) Weight: approx. 650 kg

Condition: excellent (used), Year of construction: 2015, operating hours: 14,900 h, functionality: fully functional, overall weight: 33,000 kg, power: 264 kW (358.94 HP), rotational speed (min.): 70 rpm, input voltage: 400 V, Slow-running, robust single-shaft shredder suitable for pre-shredding a wide variety of materials without solid contaminants. Application: Shredding of industrial and commercial waste, foils, packaging materials, textiles, paper, rubber, demolition wood, pallets, paper rolls, cable drums, and mixed plastics for thermal and recycling purposes, loose or baled. Lindner Jupiter 2200 Drive power: 2 x 132 kW (ABB motors) Screen perforation: According to customer requirements. mm Control cabinet: complete with (FU-ABB) Working opening: 2135 x 1750 mm Filling volume: approx. 5.5 m3 Rotor length: 2200 mm Rotor flight circle: 745 mm Rotor speed: 50 Hz: 87 rpm Number of rotor blades: 84 Blade shape: 172 x 57 x 28 mm Lower anvil blades: 6 Upper scraper combs: 6 Hydraulic feed: 11 kW Total weight: approx. 33 t Dimensions LxWxH mm: 5500 x 3050 x 3100 mm, with hopper H = 4880 mm Delivery time: immediately Iedpfx Asv S Hyvjhnstl Two discharge belts available as an option.

Condition: like new (used), Year of construction: 2020, Markforged Type: X7 Gen 2 3D printer The X7 prints industrial-grade fixtures, jigs, tools, and end-use parts. Designed for production environments, it prints parts that are stronger than machined aluminum, at a fraction of the cost. It combines superior surface quality, build volume, and reliability. Accelerate production with Turbo Print and verify dimensional accuracy with the adaptive manufacturing technology Blacksmith, which is only available on the X7. Technical specifications: Printer features Process: Fused Filament Fabrication, Continuous Fiber Reinforcement Build volume: 330 x 270 x 200 mm (13 x 10.6 x 7.9 in) Weight: 48 kg (106 lbs) Footprint: 584 x 483 x 914 mm (23 x 19 x 36 in) Print bed: Kinematic coupling - level to within 80 μm accuracy Laser: In-process control, active print calibration, bed leveling Extrusion system: 2nd generation extruder, out-of-plastic and out-of-fiber detection Power supply: 100–240 VAC, 150 W (2 A peak) RF module: Frequency range 2.4 GHz Wi-Fi standards 802.11 b/g/n Materials Available plastics: Onyx, Onyx FR, Onyx ESD, Nylon White, P-PLA, S-TPU 95A Available fibers: Carbon fiber, Carbon fiber FR, Fiberglass, Aramid fiber (Kevlar®), HSHT Fiberglass Tensile strength: 800 MPa (25.8x ABS, 2.6x 6061-T6 Aluminum) * Tensile modulus: 60 GPa (26.9x ABS, 0.87x 6061-T6 Aluminum) * Part properties Layer height: 100 μm standard, 50 μm minimum, 250 μm maximum Infill: closed-cell infill: several geometries available Software Eiger Cloud: Slicing, part and build job management (additional options available at extra cost) Security: 2-factor authentication, org-admin access, single sign-on Blacksmith: Adaptive manufacturing platform (additional purchase required) Year of manufacture: 2020 last maintenance in December 2024 Sale from current location Condition: used Isdpfx Ajzh Dqmjhnstl Scope of supply: (See pictures) one roll each of Kevlar, fiberglass and carbon fiber, 11 partially used rolls of Onyx filament (Subject to change and errors in the technical data, specifications are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), functionality: fully functional, overall weight: 1,00,000 kg, workpiece weight (max.): 18 kg, Hot forging hammer HUTA ZIGMUNT type MPM 3000 Energy of blow: 10 000 kgm Ram weight: 3 580 kg. Max. ram stroke: 1 000 mm Number of strokes per minute: 90 Total weight: 100 ton Iedpfxjzzrtve Ahnotl Anvil weight: 70 ton

Condition: excellent (used), functionality: fully functional, ERNST NAGEL Foldnak 8 (refurbished) !! In excellent condition / like new !! Saddle stitching machine for brochures up to 100 pages, 2 stitching heads for wire and booklet staples Stitching and folding in a single process, automatic triggering via photocells Magazine and misfeed control, counter, adjustable stapler anvils, wire and booklet staples in the same stitching head, format change in approx. 1 minute! Paper formats DIN A5, A4, A3, A3+, SRA3 (and any intermediate format) Brochure formats DIN A4, A5, A6 (and any intermediate format) 2 stitching heads with magazine control. No staple – no stitching. No adjustment for paper thickness required Staple types: wire staples Ri 26/6 Booklet staples 26/6, 26/8, 26/8S Production output up to 2,000 brochures/hour Connection: 230 V, 50 Hz, 300 W Weight: 109 kg / Dimensions in mm: H 870 x W 610 x D 1270 NAGEL TRIMMER / Front cutter processes everything that comes from the Foldnak 8. Itjdpfozmgm Ujx Ahnjl The pressing station before trimming ensures flat-lying brochures with a sharp fold; top-mounted conveyor belts ensure secure paper transport, even of "thick" brochures; adjustable belt advance ensures accurate alignment against the stop, even with brochures fed in at an angle; format change in 30 seconds. Brochure formats DIN A4, A5, A6 (and any intermediate format), min. 10 cm Weight: 160 kg Without a scale plate, only a collection tray is available.

Condition: excellent (used), Year of construction: 1980, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, pressing force: 4 t, stroke length: 1,200 mm, oil tank capacity: 700 l, total height: 7,480 mm, overall weight: 78,500 kg, year of last overhaul: 2023, Equipment: documentation/manual, Oil-hydraulic forging hammer Lasco type KH 400 YOM 1980 Fully retrofitted and modernized 2023. Iedpfxezh Ncho Ahnstl Work impact: 4,000 mkg Fall height in normal dies: 1,200 mm Ram weight: 3,350 kg Length between the guiding light: 725 mm Ram: 620 mm Motor power: 60 kW Weight of the anvil: 44,000 kg Total weight of the hammer: 78,500 kg Total height of the hammer: 7,480 mm Building height above floor level: 6,260 mm Oil tank capacity: 700 liters Piston rod Length: 500*2800 mm Rubber cushions: 90/2900*120 mm Operating voltage: 380 Volts Control voltage: 220 Volts Slowly ON: 0.62 m/min.

Condition: excellent (used), Year of construction: 1978, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: 24, overall weight: 1,40,000 kg, Hot forging hammer 5 ton Kramatorsk type M2147 Nominal weight of dropping parts: 5000 kg Actual mass of dropping parts without upper die: 5080 kg Energy of blow: 12 500 kgm /125 kJ/ Max. number of strokes per minute: 50 Ram stroke: 1300 mm Min. distance ram – die holder: 400 mm Distance between columns: 800 mm Die length: 950 mm Die holder length: 1180 mm Dimensions /L x B x H/: 3000 x 2000 x 6470 mm Bottom anvil weight: 23 t Isdelnlq Dspfx Ahnetl Upper anvil weight: 77 t Total weight 140 t

Condition: used, Year of construction: 1961, Impact energy: 2040 Stroke: 660 mm Strokes per minute: 100/min Throat depth: 750 mm Itedpszypd Njfx Ahnjl Distance between lower anvil and ram guide edge: 660 mm Drive power: 75.0 kW Weight: 32 t Hammer weight: 16.5 t Anvil weight: 15.5 t Ram weight: 750 kg

Condition: excellent (used), Year of construction: 1999, ARBURG 420C 800-250 with the sprue picker anvil+long leg Year of manufacture: 1999 injection unit: Screw diameter: 40 mm injection weight: 158 g injection pressure: 1390 bar Metering volume: 188 ccm Clamping unit: clamping force: 80 t tie bar distance: 420x420 mm size of clamping platens: 570x570 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap 12 Robot interface Control with air valve Core pull control Injection unit hardened - bimetal Itodpfjzy Ih Tox Ahnjl Dimensions: Weight: 3180 kg length/width/height: 4.30x1.64x2.08 m Drive: Pumps/motor: 15 kW Heating power: 6,5 kW Total power: 21,5 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: good (used), blacksmith vise, bottle vise, anvil vise, anvil, blacksmith's anvil, bench vise, locksmith's vise, parallel vise -Jaw width: 135 mm -Wingspan: 150 mm Itsdodl E Irspfx Ahnjl -Number: 8x vises available -Price: per piece -Dimensions: 450/160/H900 mm -Weight: 35 kg

Condition: used, Year of construction: 1995, Rebuilt in 2020 Printing Specifications: 5 wet-offset printing towers Variable print repeat: 14”–26” Printing width: 475 mm Web width: 485 mm Mechanical speed: 250 m/min 360° register control Manual ink duct 24” printing inserts Plate thickness: 0.30 mm Sticky-back blanket thickness: 0.95 mm 3-cylinder printing configuration Unwinding & Rewinding: • Unwinder for reels up to Ø1270 mm • Unwind shaft • Rewinder for reels up to Ø1270 mm • Rewind shaft Ø70 mm Web Handling: Itodpfx Aszzaz Ushnel • BST web edge control • BST WebVideo inspection system • 2 turner bars with air blower (after printing units 1 and 2) Drying & Dampening: • GEW UV drying system, 5 lamps (2020) • Power cabinets for UV system • Technotrans dampening cooling system with alcohol dampening Die Cutting & Finishing: • Servo-driven die-cutting unit • Waste rewinder • Punching and perforation station including: o Common paper infeed with pull wheels o Length perforation o Space for two file-hole groups o IMR block with duplex sprocket punching (245–485 mm) o Pile marking device o Length slitting o 24” file-hole punch unit o Common anvil cylinder for two cross-perforation cylinders up to 28” o Variable zig-zag folder (5”–16”) o 2 × 24” cross-perforation cylinders Control & Equipment: • Main drive motor frame • Press control panel • Main electrical cabinet • Plate bender

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 232657 SZ. 281, overall weight: 2,400 kg, total width: 1,350 mm, total length: 1,200 mm, total height: 2,400 mm, type of input current: three-phase, input voltage: 400 V, year of last overhaul: 2023, Refurbished eccentric press from a traditional blacksmith's workshop. An eccentric press manufactured by Ganz and Társa in 1897, now in fully refurbished condition, is for sale, complete with a set of rare cutting tools. During the refurbishment, the following parts were replaced: - Main shaft grey cast iron bearings - Drive shaft - Drive shaft bronze bearings - 3 locking pins - All protective covers - Complete repainting (with the cast surface pre-cleaned by shot blasting) The cutting tools can still be used to create various leaf and flower patterns, which are then shaped into their final form by hand. This process allows for the traditional production of completely unique shapes that are no longer available commercially. The machine has a unique historical background, and I can share more information and archival images with the buyer. Itjdpfx Aozt Dmfjhnjl

Condition: like new (used), Year of construction: 2019, Ref: 11072 . 2019 Horizon RD-4055 Dual Cylinder Rotary Die Cut System Like new, ex demo condition - ONLY 5,000 on the counter! Efficient production with new separator and card stacker for labour saving operation. Features: • Die cutting, waste separation and stacking in one pass for efficient production. Itsdpfeymmqzox Ahnol • A wide range of applications can be processed such as business cards, greeting cards, labels and light packages. • Maximum 6,000 sheets can be processed. • 21-up round corner business card production can processed at 126,000 cards per hour. • Simple and easy operation without relying on a skilled operator. • Uniquely designed servo motor controlled ‘Repeat-cut’ feature allows multiple-up cuts from a single up die to minimize die cost. • Ruggedly constructed yet compact compared to normal die cutters. • Various delivery options are available to process a wide range of applications. • Die-cutting and Kiss cutting can be performed simultaneously by using a die which has two different blade heights, ideal for making stickers and labels. • Creasing can be achieved to avoid image cracking. Suitable for boxes, pocket folders and greeting cards which require additional folding processes after die cutting. • Repeat-cut enables the running of multiple up imposed applications with a smaller die to reduce die cost (Up to 8 repeats) Equipped with: TOUCH PANEL: Both setup and control can be done through the intuitive touch screen. After mounting the upper and lower die, the system can be set up by simply inputting sheet size and product size. The graphical illustrations on the screen are simple and easy to understand. FEED SECTION: Vacuum belt feeding enables superior feeding with easy setup and operation. An ultrasonic sensor is used for double feed detection on a wide range of substrates. The optional code reader BR-N4055 enables job separation for easy handling. TRANSPORT SECTION: Sheets are registered by vacuum belt and position is firmly secured with gripper rollers for accurate and consistent register. Servo motor driven gripper rollers ensure the die cut position without effecting processing speed. The optional alignment detection sensor ADS-N4055 detects the alignment error for additional quality control. DIE CUTTING SECTION: Rigid magnetic upper roller and solid lower anvil cylinder ensure high quality die cutting. Uniquely designed die cutting section enables easy and quick die setting. Specification: Sheet Size (Before processing): Max. W400 x L550 mm or W15.740" x L21.650" Min. W200 x L275 mm or W7.875” x L10.830” Processed Material: Normal paper, Coated paper, Cardboard Material Thickness: 127.9 to 400 gsm Die Cutting: Max. 0.5 mm or 0.019” (In case of blade height: 0.8 mm or 0.031”) Max. 0.3 mm or 0.011” (In case of blade height: 0.6 mm or 0.023”) Creasing: Max. 0.4 mm or 0.015” (In case of blade height: 0.8 mm or 0.031”)

Condition: ready for operation (used), Year of construction: 1991, A BÊCHÉ hydraulic short-stroke die forging hammer is offered for hot forming and die forging of workpieces. Working capacity: 16kJ, continuous blow frequency at full load: approx. 32/min-38/min, max. blow frequency: 122/min, final ram velocity: 5.1m/s, main drive pump flow rate: 187.5l/min, circulation pump flow rate: 120l/min, oil capacity in the drive head: 550l, clear width between the guides: 520mm, working height to upper edge of insert: 750mm, ram depth: 470mm, insertion depth: 550mm, die height min./max.: 120mm/320mm. Total weight: approx. 23.2t, anvil bed, overall dimensions X/Y/Z: approx. 1485mm/825mm/4552mm, max. space requirement/foundation dimensions X/Y: approx. 3350mm/3300mm. An on-site inspection is possible. Iedezrhhwspfx Ahnotl

Condition: like new (used), Year of construction: 2026, Corner Crimping Machine WEGOMA The EV175 has an automatic positioning system according to the profile width • easy convertible and adjustable by scale • dual foot pedal operation for clamping and crimping • laminated nylon support pads on table and support arms • second positioning key for special profiles and crimping tools on request • sinkable anvil, hydropneumatic Itedoyuziuepfx Ahnol • vertical clamping cylinders • weight of crimping knives easy adjustable

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, overall weight: 64,000 kg, workpiece weight (max.): 18 kg, 1. Forging hammer HUTA ZIGMUNT type MPM 2000A Energy of blow: 7 000 kgm Ram weight: 2 380 kg. Max. ram stroke: 950 mm Number of strokes per minute: 100 Total weight: 62.5 ton Anvil weight: 45 ton 2. Trimming press SMERAL type LKO 315 Nominal force 315 ton Stroke 180 mm Shut height 530 mm Ram adjustment 115 mm Number of strokes per minute 30 Main table size 1 250 x 800 mm Distance between columns 1300 mm Sizes L x B x H: 2600 x 1750 x 4600 mm Electric output 25 kW Total weight 17 000 kg 3. Inductive heatinfg device AEG ELOTHERM 400 kW Iedslnllbepfx Ahnstl A numbers of different inductors are available in the set.

Year of construction: 2022, condition: good (used), Manufacturer / Model: Grafotronic DCL2 550 Serial Number: 220520G Web Width: 550 mm Year of Manufacture: Location: Germany Condition: Used – in production CE Marking: Yes _____ Main Configuration Unwinder Module: • Max. roll Ø 1000 mm / weight 430 kg • Ultrasonic sensor and web guide ±15 mm • Splice table with clamps, servo brake, reel lift Flexo Printing / Coating Module (10–24" repeat): • GEW E2C UV dryer • Ceramic anilox 400 l/cm – 5.5 cm³/m² • Stainless steel ink pan 1.2 L, reverse-angle doctor blade • Re-register drive for overprinting • Max. speed 100 m/min – tolerance ±0.1 mm Die-Cutting Module (10–24" repeat): • Servo register system, anvil & support roller • Contact matrix rewind, stripping bar • Delam/Relam before die-cutting (limit 70 m/min) • Max. speed 250 m/min, tolerance ±0.1 mm Inspection & Slitting Section: • Missing Label Detection (MLD) up to 220 m/min • Automatic Sci-Fi knife system (12 sets) • Vacuum edge-trim removal • Auto-set under/back scorer (2 knives) Semi-Automatic Turret Rewinder: • 2 × Ø 600 mm rolls • Semi-automatic cutting and push-out system • Label & meter counters • Core diameters 40–76 mm Additional Equipment: • Anti-static brush • Tablet with housing and accessories • ERP interface • Crane for magnetic cylinders Materials: • Foil 30–250 µm • Paper 100–250 µm Iodoxq A Hlopfx Ahnetl _____ General Condition: Overall in good working order. According to the operator, two UV units require lamp replacement, which represents a minor cost. All other modules are fully functional.