Used Asahi Okuma for sale (230)

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 0537, CNC: OSP-U100L X-axis: 1050 mm Y-axis: 560 mm Z-axis: 460 mm Table size: 1300 x 560 mm Number of tool pockets: 32 Spindle taper: BT50 Max spindle speed: 12,000 rpm Spindle motor power: 15 kW Machine dimensions: H=3200 x W=3000 x L=3400 mm Lodpfx Abexlta Ej Usrt Machine weight: 8,000 kg.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 345, type of input current: three-phase, Equipment: documentation/manual, We are offering this very well-maintained Okuma LB200-M-C CNC lathe, year of manufacture unknown. Rated voltage: 400 V Ljdpfozyfw Sox Ab Uert Number of phases: 3 Frequency: 50 Hz Maximum power consumption: 20.5 kVA Total current consumption: 29.6 A Maximum motor current consumption: 47 A Current interruption at: 10 kA Diagram No.: W6200-100-956-5 Serial No.: 0345 If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 2007, Used OKUMA lathe - Model: LT200-M TwinStar - Year: 2007 Lodpfjv S Svvsx Ab Uort - including chip conveyor - coolant tank - immediately available

Condition: good (used), Year of construction: 2006, Used lathe by OKUMA Lredpfx Absv S Su So Ujt - Model: LT 200-M TwinStar - Year of manufacture: 2006

Condition: used, Year of construction: 2015, functionality: fully functional, Model: OKUMA MULTUS U3000 2SW 1500 (CNC turning and milling center) Control: OKUMA OSP-P300S Turning length: approx. 1,500 mm Max. turning diameter: up to 650 mm Tool system / interface: HSK-A63 Main spindle: Drive power: 22 kW Torque: 427 Nm Max. speed: 5,000 rpm (2 gear stages) Spindle nose: Short taper size 6 Spindle front bearing: Ø 120 mm Spindle bore: Ø 80 mm 3. Counter spindle (Okuma motor spindle) Travel: Traversable on the W-axis Drive power: 22 kW Torque: 427 Nm Max. speed: 5,000 rpm Spindle nose: Short taper size 6 Spindle front bearing: Ø 100 mm Spindle bore: Ø 62 mm Tool spindle / Milling spindle (Okuma motor spindle) Drive power: 22 kW Torque: 120 Nm Max. speed: 12,000 rpm Tool holder: HSK-A63 Ledpfx Aozu I U Aob Uert Axes & Travel Ranges C-axis: 360° (Indexing / Positioning in 0.001° increments) Y-axis: Stroke +125 mm / -125 mm (Total stroke 250 mm) B-axis: 240° (Indexing / Positioning in 0.001° increments) Tool magazine & Turret Tool Magazine (ATC): 120 positions Lower turret: 12 stations with direct mounting system "radial" Turret guides: ZB-axis with cylindrical roller linear guide XB-axis with slide guide Coolant supply / Internal coolant supply (ICS): max. 20 bar (including bag filter) External cooling for tool spindle: max. 8 bar Accessories: Short loader LNS Quick Load Seri O III

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 13764x, Equipment: documentation/manual, CNC lathe in very good condition, available for demonstration in production, complete with extensive accessories. Last inspection: 2026 Release date: available on short notice. Ljdpfx Abszx Aqgj Uort

Condition: used, turning diameter 260 mm turning length 280 mm control OSP500 1. Machine Specifications Item Unit Specification Number of controlled axes – 2 Swing diameter over bed mm Ø 450 Swing diameter over slide mm Ø 350 Swing diameter over cross slide mm Ø 300 Maximum turning diameter × length mm Ø 260 × 280 Spindle diameter mm Ø 100 Spindle nose – JIS A2-6 Lrodpjwm Rrdofx Ab Uet Spindle taper mm Ø 70 × 1/10 Spindle bore mm Ø 62 Spindle speed range rpm 35 – 4,000 Z-axis travel mm 320 Z-axis rapid traverse mm/min 20,000 X-axis travel mm 155 X-axis rapid traverse mm/min 15,000 Turret type – V Number of tools – 8 (optional 12) Tool size (external turning) mm ¦ 25 Tool size (internal turning) mm Ø 40 (optional Ø 32)

Condition: excellent (used), Year of construction: 2005, operating hours: 6,820 h, functionality: fully functional, turning length: 1,075 mm, turning diameter: 620 mm, spindle bore: 110 mm, spindle speed (max.): 3,500 rpm, travel distance X-axis: 300 mm, travel distance Z-axis: 1,075 mm, rotational speed (min.): 3,000 rpm, total height: 2,780 mm, total length: 5,800 mm, total width: 2,100 mm, overall weight: 8,600 kg, CNC Lathe with c-axis Okuma - LB 400M MACH-ID 9780 Make: Okuma Type: LB 400M Control: OSP-E100L Year: 2005 KITAGAWA 400 mm chuck Spindle bore 110 mm Chip conveyor Feed rate X-Axis 20M/Min Feed rate Z-Axis 25M/Min Coolant and Filtration system Max. turning Ø: 620mm X-Axis: 300mm Z-Axis: 1075mm Spindle bore: 110mm Speedrange: 3500Rpm Spindle power: 45kW ATC / revolver: 12 Speed live tools:3000Rpm Chip conveyor: Yes Tool eye: Yes Hours: 6820H Pinole taper: 5Mk Length: 5800mm Width: 2100mm Height: 2780mm Lodpfx Aezu Nu Rjb Ujrt Weight: 8600kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2006, Okuma Space Centre MA-600HB Horizontal Twin Pallet Machining Centre with Okuma OSP-P200M CNC Control System. Serial No. 1296158 (2006), X Axis = 1,000mm, Y Axis = 900mm, Z Axis 1,000mm, Spindle Nose NT 50, Spindle Speed Std 6,000rpm, Spindle Drive VAC 30/22kw, Pallet Size 630 x 630mm, Max Weight on Pallet 1200kg, Pallet Indexing 1 deg, Pallet Change Time 11 seconds, Max Work Piece Size Ø 1,000 x 900 High, Axis Drives Feed Rate X, Y, Z Axis 1 - 60,000mm/min, Rapid Traverse X, Y, Z Axis 60,000mm/Min, Automatic Toolchanger No. of Tools 40, Floor Space 3,380 x 6,140mm, Machine Weight 24,000kg Approx. Qty of 50 INT Spindle Tools (Back End Only). Country of Origin: Japan Lsdpoz Arzvjfx Ab Ujrt Location: These lots are located in Swindon, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: used, Year of construction: 2015, overall weight: 5,500 kg, OKUMA OSP-P300L-R control unit, with TOP AUTOMAZIONI XFS370 bar feed system. Workholding and tooling are not included. Ljdpfxezxrx Te Ab Usrt AVAILABLE IN NOVEMBER 2026.

Condition: used, Year of construction: 2001, Technical data: Lrodpoqucnbofx Ab Ust Okuma Space Turn LB 300 MY Year of manufacture: 2001 Control: OSP U 100 L Max. Turning length: 340 mm Chuck diameter: 10 inch X-axis: 280 mm Y-axis: 120 mm Z-axis: 500 mm C-axis: 360°(0.0001°) Spindle: 4500 rpm Spindle clearance: 62 mm Weight: 6000 kg Accessories: -Driven tools -Chip conveyor -Transformer -Manuals

Condition: used, Year of construction: 2008, Control OKUMA OSP-P200M. Cooling threw spindle. Rotating axe A Tsudakoma 250. Chip conveyor Lrsdpozqtbgofx Ab Uet RENISHAW OMP40 Tool probe Velikost upínací plochy 1000 x 460 mm Rozsah pojezdů os: Axe X 762 mm Axe Y 460 mm Axe Z 460 mm Spindle revolutions 50 - 8000 rpm DIN 40 Number of tool positions 48 Machine dimensions 2805 x 2160 x 2746 mm Machine weight 7100 kg

Condition: used, OKUMA POWER SUPPLY 5000T E0451-521-038 . 03487 Ljdpsy Suyvofx Ab Uort

Condition: used, OSP GRAPHIC PANEL 5000 E0105-800-027 The parts were removed from production facilities that were in operation until they were decommissioned. Ledpfeyn R S Ejx Ab Uert Condition: used (functional)

Condition: used, OKUMA DC POWER SUPPLY Lsdpfey Supwox Ab Uort DCPS-1 FOR 2 AXES

Condition: used, OKUMA BLUSHLESS SERVOMOTOR DRIVE UNIT BL-120E-20 Lrodpfjy Suw Uex Ab Ust

Condition: used, OKUMA POWER SUPPLY GLP 5000T Lrodpfsy S Dr Uox Ab Ust E0451-521-037 . 2663

Condition: used, functionality: fully functional, machine/vehicle number: 24423, turning length: 200 mm, turning diameter: 210 mm, spindle motor power: 11,185 W, spindle speed (min.): 40 rpm, spindle speed (max.): 4,000 rpm, spindle bore: 58 mm, travel distance X-axis: 178 mm, travel distance Z-axis: 203 mm, rapid traverse X-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, type of input current: three-phase, feed length X-axis: 178 mm, feed length Z-axis: 203 mm, bar passage: 58 mm, total height: 1,800 mm, total length: 2,300 mm, chuck outer diameter: 203 mm, total width: 2,700 mm, bar diameter (max.): 58 mm, spindle nose: A2-6, overall weight: 8,000 kg, spindle diameter: 203 mm, working range: 200 mm, Equipment: rotational speed infinitely variable, Okuma & Howa ACT-2SP-2 CNC lathe with two parallel spindles, equipped with an Okuma OSP5020L numerical control system. The machine features two hydraulic self-centering chucks and two independent tool turrets, enabling the simultaneous machining of two workpieces. Key features: Turning diameter: approximately 210 mm Turning length: approximately 200 mm Chuck diameter: approximately 203 mm Chuck bore: approximately 58 mm X-axis travel: approximately 178 mm Lodpozpd Alsfx Ab Uert Z-axis travel: approximately 203 mm Spindle speed: approximately 40–4,000 rpm Spindle power: approximately 11 kW per spindle CNC control: Okuma OSP5020L Serial number: 24423 Chip conveyor/extractor included The machine is complete with all its main components, currently not in operation and requiring functional testing. Sold as is. Loading onto the transport vehicle will be handled by the seller. Transportation costs remain the responsibility of the buyer. The machine can be inspected at our facility.

Condition: used, Year of construction: 1995, turning diameter 150 mm turning length 1250 mm control OSP 7000 L total power requirement 37 kW weight of the machine ca. 8500 t Ljdpfx Abjyi Hwto Uort

Condition: used, Year of construction: 2001, x-travel 560 mm Ledpfx Aoyi Hv Njb Uert y-travel 460 mm z-travel 450 mm Control OSP U10 M total power requirement 7,5 kW weight of the machine ca. 5 t

Condition: used, Year of construction: 2001, turning diameter: 210 mm, spindle bore: 53 mm, travel distance X-axis: 195 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 700 mm, rotational speed (max.): 6,000 rpm, overall weight: 6,500 kg, distance table center to spindle nose: 960 mm, OKUMA OSP-U100L control unit, with TOP AUTOMAZIONI XF370 bar feed system. Ljdpfozw Nu Nox Ab Usrt Workholding and tooling are not included. MUST BE PICKED UP BY SEPTEMBER 2026.

Condition: good (used), Year of construction: 2001, functionality: fully functional, turning length: 1,250 mm, turning diameter: 620 mm, spindle bore: 120 mm, spindle speed (max.): 3,500 rpm, travel distance X-axis: 300 mm, travel distance Z-axis: 1,275 mm, spindle motor power: 22 W, total height: 1,925 mm, total length: 3,980 mm, total width: 1,880 mm, overall weight: 7,600 kg, bar passage: 80 mm, spindle nose: JIS-A2-8, Equipment: documentation/manual, OKUMA SPACE TURN LB400-M – CNC TURNING CENTER OKUMA SPACE TURN LB400-M – a robust and powerful Japanese CNC turning and milling center designed for precision machining and series production of metal components. The machine is built on the proven OKUMA platform and offers high rigidity, reliability, and excellent performance for demanding CNC turning applications. The LB400-M version is equipped with driven tools and a C-axis, making it suitable for complex machining operations and allowing multiple machining processes to be completed on a single machine. MACHINE DATA Manufacturer: OKUMA Model: SPACE TURN LB400-M Type: CNC Turning & Milling Center Machine type: CNC Lathe / CNC Turning Center CNC Control: OKUMA OSP Number of axes: 2 + C-axis Turret: 12-position turret Driven tools: Yes C-axis: Yes Hydraulic chuck: Yes Coolant system: Yes Lrsdpfx Aozwdw Esb Ujt Chip conveyor: [YES / NO] Tailstock: [YES / NO] Condition: Used / Good working condition MAIN FEATURES Robust Japanese OKUMA construction CNC turning and milling capability C-axis for complex machining operations Driven tooling 12-position automatic turret Hydraulic chuck High rigidity and stability Suitable for both single-part and series production Excellent machine platform for heavy-duty turning applications Machine available for inspection and testing The machine has a 3-year-old refurbished main spindle and X-axis.

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 1,000 mm, controller manufacturer: OKUMA, controller model: OSP E-100M, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 320, number of axes: 4, This 4-axis Okuma MA-600HB horizontal machining center was manufactured in 2005. Ideal for complex machining tasks, it offers robust construction and precision. The machine have room for 320 tools in ATC, preparation for Fastems and Concept2000 conveyor. Consider the opportunity to buy this Okuma MA-600HB horizontal machining center. Contact us for more information. Lredpfx Aozr Ny Usb Uet Additional equipment • Balluf read/write • Renishaw MP10 • 30 Bar coolant • Mayfran Consept 2000 Machine Benefits Technical Machine Benefits • Nc table (0. 001-degree accuracy) • Atc with 320 places (80 places for 600 mm tools) • Tool breakage control • Mop tool control Extra Information Machine still under power Technical Specification Taper Size BT 50 Through-spindle Coolant Yes

Condition: like new (used), Year of construction: 2015, functionality: fully functional, * Okuma Millac 852V II / 50. * Machine in excellent condition with very few cutting hours. * Machine designed for high material removal rates. * Prismatic guides on all axes. * Quadruple prismatic guide system on the Y-axis. * Extremely rigid structure. * Lubrication system for guides, oil-fed, with automatic machine stop. * Renishaw tool probe. * BT 50 spindle taper. * 18.5 kW high-torque motor. * Cutting power of 580 N/m. * Chip evacuation capacity of 540 cm/min. * Automatic Okuma IGF OSP300 conversational programming system. Ljdez Alh Nepfx Ab Uert * Automatic force control and tool consumption monitoring. * Parameterized automatic tool collision avoidance system. * Communication ports via USB, PCMCIA card, and RS 232. * Tool life management and tool consumption monitoring. * Automatic control of tool torque and stresses. * Table dimensions: 2,200 x 850 mm. * Permissible weight: 2,500 kg. * Spindle speed: 6,000 rpm. * X-axis travel: 2,050 mm. * Y-axis travel: 850 mm. * Z-axis travel: 750 mm. * Oil cooler for the spindle. * Rapid traverse speed: 20,000 mm/min. * Tool storage for 36 tools. * Tool change time: 0.5 seconds. * Chip-to-chip time: 5 seconds. * Independent Knoll coolant system with 70 bar pressure. * 30-micron anti-particle filter system. * LTA fume extraction equipment. * Rear chip extractors, hinged type. * Machine currently in production. * Inspectable by a qualified, certified Okuma technician. * Near-new condition. * Extensive range of BT 50 tool holders. * Electrical transformer, documentation, parts list, electrical diagrams, programming and operations manual. * Machine weight: 20,500 kg. * Immediate delivery, unless sold prior.

Condition: good (used), Year of construction: 2000, functionality: fully functional, Technical details turning diameter 420 mm turning length 650 mm control Okuma OSP-U100L spindle bore 95 mm Lredpfxjzr Hyfo Ab Ust spindle turning speed range 2800 U/min travel -x axis 300 mm travel -z axis 675 mm main drive motor 22/30 kW weight of the machine ca. 5,5 t dimensions of the machine ca. 2700 x 1900 x 1885 mm Additional information First put into operation 2001. - 12-station turret (VDI 40) with driven tool stations, 3,000 rpm, 5.5 kW - Internal extraction system by Hengst Filtration (year of manufacture 2023) - Touchsetter, tool measurement - C-axis (main spindle) - Tool breakage and wear monitoring - 3-jaw chuck, Kitagawa B210, Ø250 - Tailstock - Coolant supply, also through the tool - IGF dialog programming - Chip conveyor