Used Assembly Accessories for sale (22,934)

Condition: used, functionality: fully functional, Year of construction: 2014, load capacity: 3,300 kg, empty load weight: 795 kg, Accessories Load center: 600 Mast type: None Kledpfeu Dzrhox Adwol Condition: Ready for use and fully functional Technical condition: Very good Description: In addition to this Luck model, we have approx. 200 heavy-duty forklifts, compact forklifts, forklift trucks & sideloaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online Hire purchase & financing at favorable conditions are always feasible for us. We are also happy to buy your used truck free of charge, even without you purchasing a vehicle from us. Our owner Mr. Peter Sawitzki will be happy to advise you in detail about this LASTSTABILISATOR , The Load Stabiliser P.S.: Our forklift master workshop specializes in repair, maintenance, overhaul and special construction for forklifts from 8 tons. We are also happy to display your vehicle for sale on consignment.

Condition: used, functionality: fully functional, Year of construction: 2001, empty load weight: 500 kg, total length: 5,090 mm, fork length: 1,600 mm, load capacity: 3,300 kg, Accessories Load center: 700 Fork width: 100 mm Fork thickness: 50 mm Mast type: None Condition: Ready for use and fully functional Technical condition: Very good Description: Length: 4,990 mm; Fork: 100 x 50 x 1600, 2 folding forks; 2 forks with open/close function Kedpfx Aowkk Adsdwell Length: 4,990 mm; Fork: 100 x 50 x 1600, 2 folding forks; 2 forks with open/close function

Condition: used, functionality: fully functional, load capacity: 10,000 kg, empty load weight: 1,250 kg, Accessories Load center: 600 Mast type: None Condition: Ready for use and fully functional Technical condition: Very good Description: Length: 2800 mm Diameter: 270 mm Kljdsu Dzbvspfx Adwel

Condition: used, functionality: fully functional, Year of construction: 2006, empty load weight: 2,090 kg, construction width: 1,500 mm, Accessories Mast type: None Condition: Ready for use and fully functional Technical condition: very good Klsdeu Dzm Eopfx Adwel Description: Cross-section: approx. 800 mm - 2 400 mm

Condition: used, functionality: fully functional, Year of construction: 2006, load capacity: 45,000 kg, empty load weight: 4,200 kg, total length: 10,000 mm, Accessories Mast type: None Condition: Ready for use and fully functional Kedpfx Aeu Dzv Hjdwell Technical condition: very good Description: In addition to this --make-- model, we have approx. 200 heavy-duty forklifts, compact forklifts, forklift trucks & sideloaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online Hire purchase & financing at favorable conditions are always feasible for us. We are also happy to buy your used truck free of charge, even without you purchasing a vehicle from us. Our owner Mr. Peter Sawitzki will be happy to advise you in detail on this --make type-- P.S.: Our forklift master workshop specializes in repair, maintenance, overhaul and special construction for forklifts from 8 tons. We are also happy to display your vehicle for sale on consignment.

Condition: used, functionality: fully functional, Year of construction: 2014, empty load weight: 512 kg, total length: 4,020 mm, fork length: 1,200 mm, load capacity: 3,485 kg, Accessories Load center: 600 Fork width: 150 mm Fork thickness: 50 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: None Condition: Ready for use and fully functional Technical condition: Very good Kljdpfx Adewikayewsl Description: 2x forks: 150 x 50 x 1,200 mm 2x forks: 150 x 50 x 1,200 mm

Condition: as good as new (ex-display), Year of construction: 2022, machine/vehicle number: NEBR-4397, Here are the technical data of the offered machine: If the press does not exactly match your requirement profile, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! ##### Technical details Pressure 15 t Technology stroke 160 mm Machine weight approx. 330 kg oil tank 10 l robust machine body with solid welded construction, manufactured according to DIN 8651 ##### Additional information low-maintenance and reliable due to robust technology cylinder with induction hardening and chrome plating steel quality: engineering steel LCG ASTM A36 4 support feet with M30 holes for floor mounting ##### Equipment 1.5 T rotating mandrel attachment, mechanical, with locking, toothed shaft and brake and 220 mm travel Kedefhcc Ispfx Adwjll hydraulic hand pump with max. 15T pressure and 160 mm travel, with return spring back wall projection to the center of the tool holder 280 mm mounting table swivels 180 degrees to the right with 60 mm bore in the center, M 12 T-slots Clearance height between swivel table and slide/turning mandrel guide 450 mm Passage height up to additional table, insertable, 650 and 800 mm Additional table with center hole, 60 mm, insertable, T-slots M12, size 270x200 mm Height of the base with two inserts for additional table 750 mm on the cylinder a pressure plate, hardened, diameter 10 mm bigger than cylinder in the cylinder head tool holder M 30 Pump lever moves from top to bottom Oil tank for 10 L hydraulic oil AW 46 Painting of the machine body: Blue, RAL 5012, pressure paint Painting of the attachments: Anthracite, RAL 7021 hydraulic single-column combination press as a special machine 15 tons, manual (C-press, hydraulic press, hydraulic press) ##### Are you looking for a custom-fit machine? Contact us for an individual offer. Our hydraulic presses are manufactured according to German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore our presses exceed the Canadian and European safety requirements, because they correspond in all points to the national Brazilian safety guideline NR 12, which is based on these. Our great strength is the special machine construction and the press automation. We sell customized hydraulic presses, press brakes and impact shears at surprisingly low prices. For the hydraulics of the presses we mainly use components of leading European manufacturers.

Condition: new, Year of construction: 2021, Single-column press with 10 T capacity, suitable for continuous shift operation, with these basic data: a) Traversing speed 0 - 10 mm/sec. downwards, b) Opening speed up to 25 mm/sec c) Starting press speed 10 mm/sec, adjustable from 0 to 10 mm/sec. d) Table size 600x300 mm e) Ram size 300x300 mm, with T-slots and central cylinder clamping f) Overall size approx. 1100x600x1850 mm g) Oil temperature display on oil tank h) Pressure setting from 0.5 T to 10 T (adjustable via rotary control) i) Cable remote control for downward/upward movement j) Machine body powder coated, or double painted k) Control cabinet supply cable from above with 3000 mm cable and 16 ampere plug l) Assembly, commissioning, instruction at extra charge Type of construction Press design Single-column press Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Max. pressing force (at 250 bar) 100 kN Free ripping force max. 10 kN Pressure build-up time Closed tool Steel on steel Max. 2 sec. Ksdshma Smjpfx Adwsll Dimensions Max. Opening width 800 mm Stroke and min. opening 500/300 mm Table height above floor 850 mm Height above floor (headroom) approx. 2850 mm Hall height min. 3,500 mm Parallel deviation at 20°C #ERROR! mm Deflection Determined at max. clamping force with 70% occupancy < = 0.1 mm/m Weight Total weight of the press without operating materials approx. 1.6 to Speeds Fast closing with 10 mm sec. Press speed 10 - 0 mm sec. Sound pressure Sound pressure level, measured at 1.5 m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Hydraulics Number of pressing cylinders 1 pc. Operating pressure max. 250 bar Pressing pressure build-up time . 2 sec. Pressure accuracy during pressing stroke #ERROR! bar Main pump Gear pump approx. 6 L/min Oil volume approx. HLP 46 MW 80 litres Ambient temperature max. 40 °C Oil temperature max. 55 °C Flow temperature °C Electrical system Main supply 400 V AC Control voltage 24 V DC Frequency 50 Hz Hydraulic connection Main motor 2.2 kW Total connection Approx. 3 kW

Condition: used, Price for one piece! Kljdexwp E Ijpfx Adwjl

Condition: good (used), Year of construction: 2009, Internal Article No.: 25040 CNC Machining Center Müga A7040 Year: 2009 Control: Mitsubishi + 4th axis Klsdpfewy U Ebsx Adwol + ICS (internal coolant supply) / filtration system / extraction system + NC clamp Röhm RKE-125L + SK40 tool holders Spindle: SK40 Spindle speed: 12,000 rpm 24-position tool changer Travel paths: X 700 / Y 400 / Z 550mm Dimensions (approx.): LxWxH 270 x 210 x 270cm Weight: approx. 4t

Condition: good (used), Year of construction: 2003, Internal item no.: 25045 Universal Milling Machine Emco FB4 Year: 2003 + Accessories (Hydraulic machine vice Allmatic 110 / 12x SK40 holders in rack) + Electrically tested until 11/2028 (as per inspection sticker) + 3-axis digital readout Heidenhain ND780 Kedpfxjw Hrycj Adwell Travel: X 450 / Y 300 / Z 350mm Quill stroke: 100mm Main drive: 3.2kW Speed range: 63 - 3150 rpm Milling table: 800x400mm Automatic central lubrication Dimensions (LxWxH): 200 x 200 x 200cm Weight: 2100kg

Condition: used, Precision Lathe BOLEY Type 4 LE Conventional High-Precision Universal Multi-Function Machine Tool Kodpow Dvv Aefx Adwell Serial No. 42562 Centre Distance 500 mm Swing over bed 240 mm Centre height over bed 120 mm Swing over cross slide 140 mm Centre height over cross slide 70 mm Spindle bore 23 mm Chuck mounting M40 x 3.5 mm external thread Tailstock taper MK 2 Quill stroke / travel 80 mm Spindle speed 30 - 1300 rpm Drive power 1.1 kW Power supply 400 V, 50 Hz - 3-axis digital readout RSF ELECTRONIC, Type Z503ST-220 - Position display HEIDENHAIN, Type VRZ 136B for rotary encoder - LCD display unit for measuring equipment on accessories - Spindle speed adjustable via 2 V-belt stages, 2 gear stages, and infinitely variable via variator belt drive - Longitudinal feed via change gears + set of change gears - Several 3-jaw and 4-jaw chucks Ø 100, 125, and 140 mm with chuck jaws - MULTIFIX quick-change tool post size A with 8 exchangeable tool holders - Vertical slide with clamp - Several clamps and vices - Clamping plates + fixture tables - Indexing table as dividing attachment - Dividing head with collets and tailstock - Heavy dividing attachment with clamping plate and handwheel drive - WOHLHAUPTER spindle tools and milling cutters + collets - Rapid-traverse spindle with pneumatic drive - Milling slide with collet chuck - External cylindrical grinding attachment - Live centre - Steady rest - VOGEL central oil lubrication - Built-in mini compressor (3.5 bar) in machine base - Compressed air maintenance unit for tooling - Operating manual - Machine mounted on steel plate (steel plate 1200 x 540 x 20 mm) Required space (L x W x H) 1650 x 950 x 1750 mm Weight lathe 660 kg (with steel plate) Weight of accessories 325 kg Very good condition

Condition: new, Year of construction: 2025, New assembly table with adjustable support bars COMALL JOB 15/3000 Klodpfjgiud Rsx Adwol Technical specifications: - Contact surfaces in semi-rigid gray PVC - Loading: 180 Kg - Four length wise sliding supporting bars, clamping system through handle - Pneumatic system with two pneumatic connections - Hardware boxes, 6 pcs. - Extensible support, equipped with two longitudinal sliding bars

Condition: excellent (used), functionality: fully functional, Technical data: Operating voltage: 400V AC Main fuse: 50A Frequency: 50Hz Connected load: 19.1kW Control voltage: 24V DC Compressed air: 6 bar Production capacity: 20 x 2m modules/h Degree of automation: fully automatic Installation dimensions: 12.5 x 5.2 x 4m (Width x Height x Depth) Stations: Decoiler: Ksdpexzug Sefx Adwsll This station loads the coil and unwinds the product part. Manufacturer: Robust Habicht & Heuser GmbH & Co. KG Type: URM-1400 Cosmetic tape applicator: Application of a cosmetic tape to the rear module edge of the product part using an applicator. Manufacturer: Printum Laser cell: Creation of contact openings on the rear module edge of the product part using a laser, and inspection of correct contact opening with pneumatic Ignun contact pins. Manufacturer: ACSYS Lasertechnik GmbH CO² Laser INLINER II 40W CO2 Inspection station: Empty cell for conducting tests on test material. Transfer tape applicator cell: Application of a transfer tape to the rear module edge of the product part using an applicator. Contact strip applicator cell: Insertion of preforms (solder pads) into the opened contact openings, followed by application of a contact strip to the rear module edge of the product part using an applicator. Soldering station: Establishment of electrical contacts by soldering the preforms (solder pads) to the contact strip. Manufacturer: ATN Automatisierungstechnik Niemeier GmbH Flasher station: Testing the functionality of the product part using a flasher and simultaneous contacting with pneumatic Ignun contact pins. Manufacturer: WAVELABS Solar Metrology Systems GmbH Type: WLAAA0039 Designation: Module flasher Empty cell: Currently no processing of the product part. Recoiler: This station loads the coil and rewinds the product part. Manufacturer: Robust Habicht & Heuser GmbH & Co. KG Type: URM-1400

Year of construction: 1988, condition: new, Ingramatic RP1/R for washer assembly M6x75/40mm. Fixed die length: 85 mm. Moving die length: 95 mm. Die height: 65 mm. 230-600ppm. Completely overhauled like new. Machinery visible in Calolziocorte (LC) REVISION ACCORDING TO CE STANDARDS. The review includes: - Disassembly and cleaning of each piece - Replacement of all bearings - Correction of guides or possible replacement - Introducer group revision - New washer assembly group - Slide unit overhauled with bronze gibs replaced - New lubrication system with hydraulic unit complete with pump, level switch, pressure switch and distributors - New die water pump - New cup vibrator diam. 670 mm. complete with vibrator control panel and overflow photocell Kjdpfxelcbkge Adwsll - Revision of the roller evacuation group - Protective casing complete with lamp and micro - Solenoid valve installation with new air system for vibrator and guides - New electrical system in accordance with CE standards complete with inverter - New engine - Belt replacement - RAL painting indicated by you

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Automatic Desiccant Cap Dosing and Assembly Line – REBEL RV5959 (Year 2012) This fully automated line receives unprocessed plastic caps and converts them into functional caps with integrated desiccant for containers requiring controlled humidity. Designed for pharmaceutical, nutraceutical, cosmetic and food industry applications. The system integrates the following operations in a single line: • Cap feeding • Punching and insertion of cardboard barrier discs Kledpfxox Hh R Re Adwol • Precise dosing of heated silica gel • Thermal and anti-static control • Insertion of inner plastic seal • 100% inspection by machine vision • Dynamic weighing and automatic rejection • Final accumulation on rotary carousel • Dual-lane production • Multi-station servo-driven rotary carousel The line is equipped with: • 2 stainless steel feeders + conveyor systems • Dual external support for cardboard reels • Industrial aspiration/extraction unit • Servo-driven rotary table • Complete VARPE V2000 checkweigher with rejection system • Six-position outfeed carousel • 5 Basler cameras + Cognex VisionPro software • Heated silica dosing hopper • Anti-static ionizing unit • 24 high-precision volumetric dosing chambers • Electrical cabinet with PLC, HMI and industrial PC • Integrated dehumidification system

Condition: good (used), MEASURING STRAIGHTEDGE SET in wooden case, 3 pieces - 3 x lengths in wooden transport box Ksdpfsx At Rfox Adwsll - DIN 875 - GRADE 1 - 2 x length 1600 mm - 1 x length 2700 mm - Total weight approx. 170 kg Errors and omissions excepted.

Condition: new, functionality: fully functional, Year of construction: 2025, SCHORR RR1000KB PETROL-POWERED SWEEPER INCLUDING SNOW BLADE AND COLLECTION CONTAINER SWEEPING MACHINE PETROL ◾ Impressive cleaning performance for outdoor applications ◾ Powerful 6.5 HP 4-stroke petrol engine – ready to use even in cold weather ◾ Robust sweeper with 100 cm working width – ideal for large courtyards, paths & expansive areas ◾ Includes snow blade, collection container & snow chains – suitable for year-round use, including winter maintenance ◾ Effortless operation – user-friendly, requires minimal effort ◾ Adjustable brush angle (left / right / straight) – efficient cleaning in all directions ◾ 3 forward gears & 1 reverse gear for optimum maneuverability ◾ Large-tread pneumatic wheels with differential lock – excellent grip on any surface ◾ Fully supported: Guaranteed spare parts supply & workshop service Maximum cleaning performance – all year round Kledow Af I Sepfx Adwel The SCHORR RR1000KB is a high-performance petrol sweeper, providing versatile all-round support on farmyards, walkways, or company premises. With a reliable 4-stroke petrol engine (196 cm³), you remain independent of weather or mains power – simply start up and go, even in frosty conditions. 100 CM SWEEPING WIDTH FOR LARGE AREAS & PRISTINE RESULTS Thanks to its wide sweeping brush with wear-resistant synthetic bristles, this petrol broom easily handles leaves, dirt, grit, spreading material, or even snow. The sweeper is perfectly suited for year-round use on driveways, pavements, forecourts, or industrial yards. The brush rotation is powerful and consistent, ensuring even compacted dirt is thoroughly removed. Built for tough outdoor applications Coarse-tread pneumatic tyres with differential lock guarantee optimal traction, even in damp or icy conditions. The robust steel frame delivers outstanding resistance to impacts and vibrations – ideal for daily, intensive use. Designed with maintenance in mind: all key components are easily accessible. COMPLETE SOLUTION WITH SNOW BLADE & COLLECTION CONTAINER Supplied with a heavy-duty snow blade featuring a rubber edge, which can be installed in just a few steps. Matching snow chains for both drive wheels are also included in the delivery. Also convenient: the large debris collection container efficiently gathers swept material. This saves time and effort, as no follow-up sweeping is needed. The motorised sweeping broom features a reliable 4-speed transmission with 3 forward and 1 reverse gear, allowing you to select the ideal speed and direction at any time. The brush unit is pivotable. Technical Data Manufacturer (Short Code): SCHORR Manufacturer’s Model: RR1000KB Fuel type: Petrol Engine: 1 cylinder 4-stroke petrol OHV Power: 6.5 HP Main brush diameter: 1000 mm Brush rotation speed: 180 - 350 rpm Starter: Recoil starter Weight: 81 kg Main Dimensions Overall length: 1480 mm Overall width: 1100 mm Overall height: 1250 mm

Year of construction: 2024, condition: new, The flattest wooden frame construction table in the world = 3 cm! Delivery without wooden boards. Text line break with the following data: Included components: 1 double rail (zero stop) - 10 perforated rails - 10 rack and pinion clamps Klsdpfx Adob Nrbnswsl - 14 adjustable stop blocks - 14 interchangeable pressure plates outer wall - Battery impact screwdriver - Bit adapter - 50 MMS 10x70/5 dowel - Hammer drill 8x165 dimensions: Clamping length from 0 to 3.550 mm hole grid 140 mm with plate width 1.250 mm = table length 12.350 mm max. clamping force approx. 250 kg stroke length clamp 340 mm height of stop blocks 100/160 mm The frame building aid was developed in order to precise production of timber frame elements. elements. Special attention was paid to the space requirements and the price. Due to the extremely flat it is now possible to change the surface by removing the the space by removing the clamps and stops. used in a different way. This is not only for small, but for all but for all company sizes a special advantage. After creating a flat surface, the tensioning rails are rails are aligned and anchored to the anchored to the floor. The intermediate spaces are covered with a 30 mm thick wooden panel to be mounted on site. filled. The same plate can be used to attach ramps to the edges. can be attached to the edges with the same plate. The level created in this way level can also be driven on with heavy vehicles vehicles, or can be used as a storage area. Thus the place can be activated only if necessary for the timber frame construction. be activated. The steel parts are galvanized. The entire assembly takes place on site. After adjusting the T [...]

Condition: good (used), functionality: fully functional, We offer a set of tools and accessories for press brakes, mainly PROMECAM. Sold as a single lot or in smaller batches. Price on request. Kodpfx Adexvxkqowjll

Condition: used, Article: gears Manufacturer: Schütte For Schütte multi spindle automatic lathes F- and G-Type of different sizes Please, contact us for getting more information and pictures on mail(at) or Klodpfen H Nzmsx Adwel *

Condition: used, Article: cam Ksdpen H Nzfsfx Adwsll Manufacturer: Schütte For Schütte multi spindle automatic lathes F- and G-Type of different sizes Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, Year of construction: 2006, Operational condition. Lightning Head Left-to-Right PCB Transfer Direction 3mm (0.117") Edge Clearance HSC Nozzle Changer Kit Fixed 36 Slot Feeder Bank Klodjxva Dljpfx Adwsl 4" Outbound Rear Single Lane Brd Support 30-SPINDLE HEAD PERFORMANCE KIT UPGRADE KIT, ACCURACY ENHANCED SPINDLE Second Rear Interface

Condition: used, Year of construction: 2006, Machine operational condition. FlexJet 2.6MPP Front Head / Pressure Enhanced Rear Head Magellan 2.3 MPP – Rear Four Sided PEC Lighting Board transfer Left-To-Right 3mm Edge Clearance Rear DPTF Mounting Location 4” Outbound, 18” Max. Bd Automatic PWC Kodpfx Ajxvay Tedwoll Single Lane Board Support All Feeder Banks Fixed 24V Transformer Kit Interface Machine With PTF Rear User Interface Kit CE Compliance GSM SECII/GEM Software Driver, S/W, New Product Introduction English Flip Books Ask for additional information!

Condition: not inspected (used), functionality: unexamined, No reserve price – guaranteed sale to the highest bidder! The machine is being auctioned due to business closure. Placing a bid obliges timely collection between 26/01/2026 and 29/01/2026! Klodpfxjxqqmao Adwol Contents include: 2 ALUP compressors RENNER refrigerated dryer another compressor FRIEDRICH DECKEL jig grinding machine