Used Attachment Frame for sale (12,609)

Condition: used, Year of construction: 1979, machine/vehicle number: 4941, Capacity: 75 ton Throat depth: 300 mm Ram stroke: 8 - 100 mm Slide adjustment: 60 mm Ljdpfew Tukvox Aabsah Shut height (stroke down, adjustment up): 390 mm Table surface area : 700 x 600 mm Slide area: 400 x 270 mm Number of strokes: 120 s.p.m. Required power: 4 kW Dimensions L x W x H: mm Weight of machine approx.: 3,5 ton Extended machine accessories Dreher roller feed model WAV-MD-2Z /1060 K-AMaterial width 210 mmMaterial thickness max. 1.5 mmMax. feeding speed 80 m/min.

Condition: good (used), Year of construction: 1998, Universally applicable frame dowel and slot drilling machine with angle adjustment. Especially designed for staircase construction, window manufacturing, and versatile applications thanks to pneumatic height adjustment. Angled dowelling and spindle drilling are easily achievable thanks to the swivelling drilling unit. Lajdpoxmatnjfx Aaboh - Motor with pole changing, two speeds - Motor power: 1.0 / 1.5 kW, 1400 and 2800 rpm - Motor start via convenient handle switch - Equipped with Röhm two-jaw chuck 1–20 mm - Linear laser for precise workpiece positioning - Drilling unit can swivel 65° left and right - Pneumatic adjustment of machining height; dowelling possible on two levels without resetting - Desired drilling heights can be set for each level via a digital counter; switching is then pneumatic from the front - Cross movement 340 mm, stepless or in 12 mm increments with indexing rail - Pneumatic clamping possible at any position, controllable from the front - Maximum height adjustment approx. 100 mm above table height - Drilling stroke approx. 200 mm - 2 pneumatic workpiece clamps, 1 clamp column repositionable to the front - 2 swivelling workpiece supports - Suction funnel - Center stop + 1 side stop - Fixed mitre stop - Length stop as round bar - Set of drill bits - Operating manual - CE mark - Machine was partially repainted due to existing paint splashes - Pneumatic hoses replaced Dimensions approx. 1200 x 1350 x 1600 mm (LxWxH), weight 380 kg. The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration in our warehouse – see "other offers from this provider."

Condition: used, Year of construction: 2002, Field of application: Construction Serial number: 0xxxx Please contact ATS Norway for more information Please provide reference number upon request: 18341 Specifications: - S70 attachment - Weight: approx. 2100 kg Lodpfxsvgz E Ae Aabjah - Ready for delivery - Oil leak Fits machine 25-40 tons. Total Weight: 2100

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: HL 2100 4290 0215, Hess Pressen Type: Hydro-LUX Lsdpfsxqcdwjx Aabjah Year of manufacture: 1990 Serial No.: HL 2100 4290 0215 380V 2.6 kW

Condition: used, Year of construction: 1997, Used machine Year of manufacture: 1997 Equipment and technical data: Electro-hydraulic drive Vertical press cylinders: 3 units Stroke of vertical cylinders: approx. 130 mm Vertical cylinders adjustable via perforated grid Horizontal press cylinders: 2 units Stroke of horizontal cylinders: approx. 130 mm Horizontal pressing force: approx. 2,000 kp Central pressure beam: 1 unit Control: manual via hand lever Pressing area: 3,000 × 2,100 mm (L × H) Dimensions: 3,500 × 800 × 2,100 mm Weight: approx. 1,500 kg The above information is subject to change until the machine arrives at our warehouse. Lodsxizt Uspfx Aabsah Availability: approx. end of October 2025 Location: Brandenburg

Condition: good (used), Year of construction: 2009, Positioner Manufacturer: Kuka Type: KPF3 V2H500 Laedpfx Asutncwsabsh Year of construction: 2009 Only base frame with 1 rotary axis KPF1

Condition: used, Year of construction: 1971, machine/vehicle number: 7130, Capacity: 60 ton Throat depth: 275 mm Ram stroke: 5 -100 mm Shut height (stroke down, adjustment up): 375 mm Table surface area : 740 x 470 mm Number of strokes: 14 - 100 s.p.m. Required power: 10 kW Lsdpouqcxnsfx Aabeah Dimensions L x W x H: 2.300 x 1.500 x 3.000 mm Weight of machine approx.: 3,5 ton

Condition: new, Year of construction: 2024, functionality: fully functional, Machine type: Automatic Mitre Band Saw Band dimensions: 3510 x 27 x 0.9 mm Lasdpfx Ajxk Ti Roabjh Cutting capacity (square): 250 x 300 mm Cutting capacity (round): 250 mm Bundle cutting: 150 - 250 x 100 - 130 mm Cutting speed: 20 - 80 m/min Main drive motor power: 2.2 kW Hydraulic pump motor power: 0.75 kW Coolant pump motor power: 0.125 kW Table height: 750 mm Weight: 1430 kg Dimensions (W x D x H): 2210 x 2290 x 1890 mm

Condition: good (used), Year of construction: 1993, functionality: fully functional, machine/vehicle number: 437, Sharpening machine for gang saws VOLLMER CABG50U, completely partially overhauled. Saw blade width up to 200 mm, tooth length up to 1650 mm, blade thickness up to 6 mm, tooth pitch 25 mm or 30 mm (eccentric disc available), tooth height up to 25 mm, tooth shape: arc tooth, cutting angle from -10 to +25 degrees, tooth form. Lsdpfx Aajxp Hl Asbeah

Condition: used, Roll Forming Line for Drywall and Zinc-Coated Door Frame Profiles General Description: Complete roll forming line designed for the production of zinc-coated steel profiles used in drywall structures and door frame systems. The machine processes galvanized steel strips with thicknesses typically ranging from 0.6 mm to 1.0 mm, featuring quick roller adjustment depending on the required profile type. Profiles Produced - Drywall Profiles: • Galvanized Tracks: width 57 mm and 77 mm, height 35 mm, sheet thickness 0.6 mm • Galvanized Studs: 39×55 mm and 39×75 mm, sheet thickness 0.6 mm • U-Shaped Profiles for False Ceilings: 27×60×27 mm, sheet thickness 0.6 mm • Offset Profiles for False Ceilings: 20×29×28 mm, sheet thickness 0.6 mm - Zinc-Coated Door Frame Profiles (10/10 mm): • Complete range from ART. 201 to ART. 217, including L, U, Z and special shapes • Variable dimensions: widths from 20 to 46 mm, heights from 15 to 31 mm, customizable configurations available Technical Features • Material thickness: 0.6 – 1.2 mm • Strip width: variable, depending on profile • Number of forming stations: 19 • Rollers: hardened and ground steel rollers Ledpfxsxnmyqs Aaboah • Drive system: independent motorization for each roller group • Feeding speed: adjustable • Cutting unit: automatic flying shear or saw • Optional units: punching, slotting, or quick-change tooling systems

Condition: used, Year of construction: 1993, Used machine Lajdpfsxiztusx Aaboh Year of manufacture: 1993 Features and technical data: Workpiece clamping height: up to approx. 250 mm Mortising unit: with 2 program cams (lowerable) 2-jaw drill chuck: up to 20 mm shank diameter Pneumatic position adjustment on 2 levels: 0–100 mm Max. drilling depth: 150 mm Precision stop rail: 12 mm Central locking and cross adjustment 2 pneumatic safety clamping cylinders Motor: 1.5 kW Speed: 2,800 rpm Required space with stop and working area: approx. 1200 × 1000 mm Dimensions (without stop): 1100 x 1100 x 1500 mm Weight: 310 kg The specifications are subject to change until the machine arrives at our warehouse. Availability: short-term Location: Flörsheim

Condition: good (used), Year of construction: 2015, Positioner (New) Manufacturer: Kuka Type: KP1-MB4000 Laodeutnkbjpfx Aabeh Year of manufacture: 2015/05 Base frame only Motor power 5.9 kW 1 piece

Condition: used, Year of construction: 1970, Press capacity: 30 ton Throat depth: 160 Ram stroke adjustable: 20 - 45 mm Slide adjustment: 10 / 60 mm Shut height (stroke down, adjustment up): 220 mm Table surface area : 470 x 300 mm Slide area: 250 x 190 mm Number of strokes: 80 - 240 s.p.m. Required power: 4 kW Laodpfx Asuqc Enoabeh Dimensions L x W x H: 1.400 x 1.800 x 2.000 mm Weight of machine approx.: 2,67 ton Standard configuration the electric is new from 2015.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, Artos Latex Line Hermosa Lajdpfx Ajxp Siysaboh Year of construction: 2000-2021 Working width: 1 meter to 2.6 meters Maximum setting width: 2.75 meters Speed: 1.7 meters to 35 meters per minute

Condition: used, Serial number: MS410HS-23E-1xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21476 Specifications: 665 kg S50 attachment Oil Flow: 70-90 l/min Ready for delivery Laedpfx Aaexivu Hsbsh Description: We have an MSB corporation MS410HS Spike hammer w/ S50 attachment for sale. The spike hammer has hardly been used, max 10 hours according to the owner. Everything works as it should. Ready for delivery Own weight: 665 Model: corporation MS410HS Pigghammer m/ S50 feste

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, Hydraulic frame press The machine is complete and fully operational Lodpfjxmr Spjx Aabeah Working range 3000 x 2000 mm

Condition: used, Working width 4000 mm Working height 2600 mm Number of cylinders 6 St. Dimensions (L/W/H) 5300 x 1250 x 3330 mm S&S frame press type RP 2000, ----- C E - version Stable frame welded construction made of thick-walled special hollow profiles, Sliding carriage and pressure bar with 50 mm hole pattern. Continuous abutment on the left for width compression, lower abutment in two levels. Vertical press cylinder on special pressure bar with one-hand quick adjustment with weight compensation in the 50 mm hole pattern, height-adjustable, long Sliding carriages ensure the permanent absorption of high pressing forces. Fast, smooth width adjustment with ball-bearing carriage Central locking, fixation in 50 mm hole pattern. Upper horizontal press cylinder infinitely adjustable in height and with Equipped with counterbalance. Lower horizontal press cylinder with center holes for the two Abutment levels, with weight compensation. Abutment and pressure plate depth 100 mm Printing plate and support width 130 mm Machine electro-hydraulically controlled, with 2 vertical pressure cylinders d = 50 mm, stroke 120 mm double-acting, with counterweight and One-hand quick adjustment, 2 pieces Horizontal pressure cylinders d = 40 mm, stroke 120 mm double-acting, with weight balancing; 2 manual control valves, Pressure gauge, 1 pressure control valve from 20 to 125 bar corresponds to 400 to 2400 kg pressure vertical, with 3 kW three-phase motor for 400 volts, 50 Hz operating voltage. Complete with electrical connection. Paint finish: RAL 7035 light gray with RAL 7016 anthracite grey Working size: 4000mm x 2600mm (length x height) Required space: 5300 x 1250 x 3330 mm (L x W x H) Machine including the following options: ----- Article .00 pc Medium pressure bar with pressure cylinder double-acting, weight compensation, pressure hose and shut-off valve up to 2600 mm high Article .00 pc Individual pressure control for medium pressure bar, Pressure control range up to max. 100 bar (for pressing crossbar windows) Article .00 pc Cross printing device complete with pressure cylinder double-acting, weight compensation, pressure hose and shut-off valve There is no weight compensation on the lower horizontal cylinder Article .00 pc Individual pressure control for transverse pressure device, Pressure control range up to max. 100 bar (for pressing crossbar windows) Article .00 pc Shut-off valve on the 3rd vertical cylinder Article .00 pc Shut-off valve on the upper horizontal cylinder Article .00 pc Width allowance for compression of small frames to bridge the 1st pressure beam, including shut-off valve on the 1st vertical cylinder Article .00 pc Basic equipment for counter profiles The space required in height increases by 100 mm Item All pressure plates and abutments covered with plastic Laedpfju Uvaljx Aabsh Article .00 pc Triangle studio window pressing device consisting of: locking device of Vertical pressure bar and 3 attachable, side-guided pendulum pressure plates Article .00 pc double pendulum pressure plate for pointed windows (triangle) ----- Total price in the above version ex works: On request! ----- Options: Article ....

Condition: used, Year of construction: 1991, machine/vehicle number: 041-024/39, Press capacity: 63 ton Throat depth: 360 mm Stroke: 500 mm Daylight: 800 mm Table surface area : 750 x 560 mm Slide area: 630 x 400 Working speed: 60 mm / sec Return speed: 380 mm / sec Electrical connected load: 12,6 kW Dimensions L x W x H: 1.200 x 1.950 x 2.800 mm Laedpfx Aaovai R Tsbeh Weight of machine approx.: 4,3 ton

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, The machine is fully operational and in good condition. Working dimensions: 3200 x 2200 mm Dimension adjustment is electrically controlled from the control panel. Laodpexmr Rxsfx Aabeh Powered by a hydraulic unit.

Condition: new, Working width 3500 mm Working height 2300 mm Number of cylinders 4 St. Lajdpfx Aajd Ih H Sebjh

Condition: used, Year of construction: 1983, machine/vehicle number: 5154, Capacity: 25 ton Throat depth: 250 mm Lodpfjuqc Hfox Aaboah Ram stroke: 6 - 60 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 190 mm Height of the bolster plate: 50 mm Table surface area : 500 x 400 mm Slide area: 350 x 250 mm Tool Clamping Hole Ram: 40 H7 mm Number of strokes: 160 s.p.m. Dimensions L x W x H: 1.300 x 1.500 x 1.995 mm Weight of machine approx.: 2 ton Standard configuration Extended machine accessories Press body can be tilt

Condition: new, Working width 3500 mm Working height 2300 mm Number of cylinders 4 St. Stable frame welded construction of thick-walled Special hollow profiles , sliding table and pressure beam with 50 mm hole pattern . On the left side continuous abutment for grouting the wide , lower abutment in 2 levels. Vertical pressing cylinder on specialty bar with one- quick adjustment with weight compensation in the 50 mm hole pattern adjustable in height. Long sliding table ensure the continuous recording of high jacking forces . Fast, smooth width adjustment with ball bearing Carriage with central fixation in 50 mm hole pattern. Upper horizontal press cylinder infinitely adjustable in height and equipped with counterbalance . Lower horizontal pressing cylinders with bore for two abutments levels without weight compensation . Abutment and pressure plate depth 100 mm Machine controlled electro -hydraulic with 2 pieces vertical pressure cylinders d = 60 mm, stroke 120 mm, single-acting, with counterbalance and Ljdpsd Ih H Njfx Aabeah One-hand height adjustment, 2 piece horizontal pressure cylinders d = 40 mm stroke, 120 mm single-acting ( 1 x with weight compensation ), 2 hand control valves , Pressure gauge, pressure regulator valve 1 of 20 to 150 bar corresponds to 550 4200 kg compression force vertically. With 3 kW three-phase motor for 400 volts , 50 Hz Operating voltage. Complete with electrical connection . Painting RAL 7035 anthracite gray with light gray RAL 7016 . (technical details according to manufacturer - without guarantee ! ) The detailed technical description can be found in the attached pdf file

Condition: new, Working width 3500 mm Working height 2300 mm Number of cylinders 4 St. Ledpfx Aed Rzc Reabsah

Condition: used, Working width 3600 mm Working height 2600 mm Number of cylinders 5 St. loading dimensions L x W x H 4400 x 1150 x 2970 mm weight 3000 kg Lsdpfx Aaow T Un Ueboah Schafberger + Sproedhuber Bavaria Frame Press ----- Machine is overhauled by us before delivery. With automatic pressing cycle + manual control for tenon + slot corner joints. CE-certified version Basic machine in the strongest welded frame construction, with thick-walled special hollow profiles. Guideways for the pressure beams for the press corners in a low-wear machined design. Fast, smooth, manual width adjustment via ball-bearing carriages, fixed in a hole pattern. Height adjustment and pressing via long-stroke cylinders in a single work cycle. Right-side press corners with integrated horizontal cylinders, therefore no vertical positioning of the horizontal pressure cylinders necessary, thus avoiding cylinder collisions. Lower abutment adjustable in several positions for the most favorable insertion height. 3 vertical press cylinders, double-acting, stroke adjusted to working height 2 horizontal press cylinders, double-acting Abutment and pressure plate depth 80 mm Working size: Length x Height = approx. 3,600 mm x 2,600 mm Space requirement/loading dimensions: approx. 4,400 mm x 1,150 mm x 2,970 mm (Length x Width x Height) Option: ALWA pressing supports for sloped windows (Technical specifications according to the manufacturer – no guarantee! Images may differ from the original. Prices are net, plus VAT (domestic))

Condition: used, Working width 3550 mm Working height 2250 mm Number of cylinders 5 St. loading dimensions L x W x H 4500 x 900 x 2600 mm Hess Speedy frame press ----- Machine is functionally tested Insertion dimension / press length max. 3,550 mm Insertion dimension / press height max. 2,250 mm Sliding carriage for width adjustment, locking in 50 mm Double hole grid system Electrical height adjustment of the long-stroke cylinders (hydraulic) Insertion height of the abutment plates can be preselected in 4 positions 3 vertical pressure cylinders stroke 1000 mm Pressure force per cylinder 2000 kN / 20000 N 2 horizontal pressure cylinders stroke 80 mm Pressure force per cylinder 1250 kN / 12500 N Pressure plate depth 100 mm width 140 mm Cylinder fixation / abutment grid 50 mm Medium pressure beam with shut-off valve Final pressure shut-off and post-pressure control Control and press sequence in touch button operation Laedpfxovn U Ruo Aabsh Adjustable pressing pressure min. 25 – max. 160 bar Electrical connection 2.2 kW / 400V Control for gluing sloped windows 2 pendulum pressure plates 45 degrees Machine dimensions W=4500 mm, D=900 mm, H=2600 mm Weight approx. 1800 kg Pictures original. Video not original, shows identical model (technical data according to manufacturer - no guarantee!)