Used Attachment Frame for sale (12,532)

Condition: used, This listing is for a Olympus U-DO3 Dual Observation Attachment. The unit is in full working condition and is ready for immediate release. The Olympus U-DO3 Dual Observation Attachment is a microscopy accessory designed for Olympus BX series microscopes. It allows for simultaneous observation by two users, making it an ideal tool for collaborative research, education, and training. Key Features Ndjdpfx Aasxxy Ivonof Dual observation capability with a movable LED arrow pointer, controllable by both viewers Selectable colour (red or green) of the arrow pointer Compatible with Olympus BX series microscopes Allows for real-time observation and discussion between two users

Condition: good (used), Code: 0119 Brand: KOLMAG - ITALY Model: PGP 600 F Njdpfx Aowk Ntzjanodf Hydraulic press for moulds, frames, furniture elements, solid wood doors, plastic materials, composite materials and various Press modular structure with heavy thick plates without weldings and worked by tool machine Oleodinamic plant with pistons prefilling system in order to have a quick opening and closing of the platens Dimensions of massive steel platens mm 1600 x 500 - Thickness mm 60 with electric resistances - Max temperature 260°. N° 3 pistons diameter mm 240 Pressure kg/cm2 56 Thrust Tonn 450 Safety photocells Hydraulic power unit Kw 7,5 Power absorbed heating platens 31 Kw Control board with pressure control gauge - Timer for platens opening - Telethermometer to regulate upper platen temperature - Telethermometer to regulate lower platen temperature - Switches for opening and closing of the platens - Emergency push button Overall dimensions mm 2250 x 1700 x 3300 h Weight kg 9000

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 2008 / 576, cutting height (max.): 250 mm, cutting width (max.): 150 mm, saw drive: 15,000 W, power: 15 kW (20.39 HP), warranty duration: 6 months, NEVA warranty includes plug & play equipment: - material guiding per choice: channels, center guide, side guide - 2 frames, 2 sets of saw blades and 2 sets of spacers - assembly frame and accessories - torque wrench, set of tools, etc. Ndedpfxjxtm Rao Aanof - complete revison of machine before leaves our factory The ORBIT Plus Thin Cutting Frame Saw was developed for cutting solid wood blocks into gluable slats with a minimum of saw kerf waste. Thin Cutting Frame Saw ORBIT utilizes a unique up/down method of movement for cutting veneer slats. Unlike conventional frame saws that move up and down in a lineal motion, the ORBIT Thin Cutting Frame Saw uses a patented swing-out motion at the bottom of the saw stroke. Applications of use: Parquet and engineered flooring, doors, windows, stairs, furniture, musical instruments, pencils, sport equipment (ski, snowboards, hokey sticks), wooden-covers for fruit and vegetables, etc. This unique movement of Thin Cutting Frame Saw ORBIT has several distinct advantages over the frame movements on older, conventional frame saws. With a conventional frame saw, a great deal of heat is generated by sawdust that is captured/packed into and around the saw blade teeth. This occurs because the sawdust and wood chips are unable to clear out from the blade during the upstroke. This fact is especially true when cutting high, as some of the teeth in the center of the saw blades never clear out of the cut. Because the ORBIT saw frame moves out of the cut during the upstroke, wood chips and sawdust fall clear from the saw blades. The result is less heat build up on the saw blade, longer saw blade life, dust free slats, the ability to use a thinner kerf saw blade and first of all increased production capacity of the ORBIT frame saw.

Year of construction: 1999, condition: excellent (used), 1. Linck FWK Quick Clamp Carriage Gauge: 900 mm Travel speed forward/reverse: 80/180 m/min Clamp opening: 750 mm Log length: 2.5–13.5 m Log diameter: 150–700 mm 2. Linck CV1/SE 600 Full Frame Saw with Variable Width Adjustment Passage width: 760 mm Passage height: 710 mm Saw stroke: 600 mm 3. Removal Device Bm 1/Mbh 4. Side Material Cross-Cut Saw Linck KA 1/ACF Year of manufacture: 1998. Commissioned: 2000 Ndsdpextwv Tjfx Aanef Various tools Sale by customer order.

Condition: good (used), Year of construction: 1992, The bender is set up for aluminum, chromatech and plastic frames. Ndodpfxeqhugfe Aansf

Condition: good (used), Year of construction: 2009, Positioner Manufacturer: Kuka Type: KPF3 V2H500 Ndedpfx Aaeutncwonef Year of construction: 2009 Only base frame with 1 rotary axis KPF1

Year of construction: 1982, condition: ready for operation (used), We offer you frame saws: 1. Bogli 71 Frame Saw with Infeed and Auxiliary Trolley and Distribution Device after the Sawmill Sawmill Type: Bogli Marathon 71 Nsdon I Udxepfx Aanjdf - Frame: 710 mm, hydraulic sawmill - Hydraulic adjustment of saws, raising and lowering of roller - 55 kW motor - Carriage with auxiliary trolley, track gauge 90 cm - Distribution unit after the sawmill Everything as shown in pictures no. 1, 2, 3, 4 Price negotiable 2. Linck E 28-28 Frame Saw - Frame stroke: 600 mm Everything as shown in pictures no. 5, 6, 7, 8 Price negotiable 3. Linck Frame Saw with Loading Trolley and Distribution Device after the Sawmill Trak Linck 71 - Frame width: 710 mm - Feed: 12 m/min - Fully hydraulic: hydraulic adjustment of saws, lowering and raising of the roller - Linck hydraulic loading trolley with additional device - Distribution device after the sawmill (bag, wedge) Everything as shown in pictures no. 9, 10, 11, 12, 13 Price negotiable

Condition: good (used), Code: 0432 Brand: STETON Model: STP - CE Standard Automatic hydraulic clamp with mobile beam for wooden frames, frames and various - CE Standard Technical data: Useful working capacity mm 3000 x 2000 N° 2 horizontal cylinders diameter mm 50 - 1300 Horizontal stroke kg 5000 N° 2 vertical cylinders diameter mm 80 - 1100 Horizontal stroke kg 13000 Max pressure kg/cm2 160 Motor Kw 2,2 Njdpsu N E Rxsfx Aansdf N° 3 positions of support bar N° 7 positions of horizontal reference stops Automatic control board Overall dimensions mm 3900 x 1200 x 2680 h Weight kg 1800

Condition: new, Year of construction: 2024, functionality: fully functional, Machine type: Automatic Mitre Band Saw Band dimensions: 3510 x 27 x 0.9 mm Cutting capacity (square): 250 x 300 mm Cutting capacity (round): 250 mm Bundle cutting: 150 - 250 x 100 - 130 mm Cutting speed: 20 - 80 m/min Main drive motor power: 2.2 kW Hydraulic pump motor power: 0.75 kW Ndjdpjxk Ti Rjfx Aanof Coolant pump motor power: 0.125 kW Table height: 750 mm Weight: 1430 kg Dimensions (W x D x H): 2210 x 2290 x 1890 mm

Condition: used, Working width 4000 mm Working height 2600 mm Number of cylinders 6 St. Dimensions (L/W/H) 5300 x 1250 x 3330 mm S&S frame press type RP 2000, ----- C E - version Stable frame welded construction made of thick-walled special hollow profiles, Sliding carriage and pressure bar with 50 mm hole pattern. Continuous abutment on the left for width compression, lower abutment in two levels. Vertical press cylinder on special pressure bar with one-hand quick adjustment with weight compensation in the 50 mm hole pattern, height-adjustable, long Sliding carriages ensure the permanent absorption of high pressing forces. Fast, smooth width adjustment with ball-bearing carriage Central locking, fixation in 50 mm hole pattern. Upper horizontal press cylinder infinitely adjustable in height and with Equipped with counterbalance. Lower horizontal press cylinder with center holes for the two Abutment levels, with weight compensation. Abutment and pressure plate depth 100 mm Printing plate and support width 130 mm Machine electro-hydraulically controlled, with 2 vertical pressure cylinders d = 50 mm, stroke 120 mm double-acting, with counterweight and One-hand quick adjustment, 2 pieces Horizontal pressure cylinders d = 40 mm, stroke 120 mm double-acting, with weight balancing; 2 manual control valves, Pressure gauge, 1 pressure control valve from 20 to 125 bar corresponds to 400 to 2400 kg pressure vertical, with 3 kW three-phase motor for 400 volts, 50 Hz operating voltage. Complete with electrical connection. Paint finish: RAL 7035 light gray with RAL 7016 anthracite grey Working size: 4000mm x 2600mm (length x height) Required space: 5300 x 1250 x 3330 mm (L x W x H) Machine including the following options: ----- Article .00 pc Medium pressure bar with pressure cylinder double-acting, weight compensation, pressure hose and shut-off valve up to 2600 mm high Article .00 pc Individual pressure control for medium pressure bar, Pressure control range up to max. 100 bar (for pressing crossbar windows) Article .00 pc Cross printing device complete with pressure cylinder double-acting, weight compensation, pressure hose and shut-off valve There is no weight compensation on the lower horizontal cylinder Article .00 pc Individual pressure control for transverse pressure device, Pressure control range up to max. 100 bar (for pressing crossbar windows) Article .00 pc Shut-off valve on the 3rd vertical cylinder Article .00 pc Shut-off valve on the upper horizontal cylinder Article .00 pc Width allowance for compression of small frames to bridge the 1st pressure beam, including shut-off valve on the 1st vertical cylinder Article .00 pc Basic equipment for counter profiles The space required in height increases by 100 mm Item All pressure plates and abutments covered with plastic Article .00 pc Triangle studio window pressing device consisting of: locking device of Nsdpfxju Uvals Aanjdf Vertical pressure bar and 3 attachable, side-guided pendulum pressure plates Article .00 pc double pendulum pressure plate for pointed windows (triangle) ----- Total price in the above version ex works: On request! ----- Options: Article ....

Condition: excellent (used), Year of construction: 2010, operating hours: 500 h, Natural gas turbine GE ( General Electric ) Model - Frame 9E YOM - 2010 Frequency - 50 Hz Power - 127 MW This power plant is in excellent condition because it was used only like SUPPORT unit. Njdoxni Anspfx Aansdf So, it's coming with only approx. 500 working hours. NOTE - Also, it's important to mention, it's designed in way that with not so big investment you can increase the power up to 180 MW. Please contact us for more details. Thank you!

Condition: good (used), Year of construction: 2015, Positioner (New) Manufacturer: Kuka Type: KP1-MB4000 Year of manufacture: 2015/05 Base frame only Motor power 5.9 kW Ndsdoutnkbepfx Aanof 1 piece

Condition: new, 🧰 Product Features • Condition: new • Colour: electro-galvanized • Version: universal • Total height: approx. 657 mm • Usable height: approx. 500 mm • Telescopic depth: adjustable from 600 to 1,150 mm • Frame profile: L profile 45 x 45 mm Ndodpfexqptrex Aanef • Material thickness: approx. 5.00 mm • Square profile: 25 x 25 x 1.50 mm (outer) • Square profile: 20 x 20 x 1.50 mm (inner) • Adjustment grid: 25 mm • Hole dimensions: 8 x 25 mm • Weight: approx. 6.62 kg 💰 Price € 58.50 net excl. VAT • Quantity discount: on request • Shipping: Europe-wide on request • Delivery time: Available immediately • Inspection and collection: possible at any time by appointment Always over 5,000 linear metres of pallet racking from various manufacturers in stock (Specifications, details, and prices are subject to change and errors. Interim sale reserved! Please see our general terms and conditions. All prices excl. VAT ex-warehouse.)

Condition: new, Year of construction: 2023, functionality: fully functional, overall weight: 3,900 kg, total length: 6,200 mm, total width: 1,200 mm, total height: 2,300 mm, motor manufacturer: Bitzer, power: 240 kW (326.31 HP), New Advansor Cubig 2 4x4 installation. Central CO2 refrigeration and freezing system. Nodpfjw R U Nmex Aanedf Equipped with Bitzer compressors and Alfa Laval plate heat exchanger for heat recovery. Cooling capacity: 105 kW at -8°C Freezing capacity: 90 kW at -48°C Complete set including condensers (gas coolers) and an additional plate heat exchanger for heat recovery. Fully pre-wired control panel with Danfoss control equipment. Eco gas cooler and Alfa Laval plate heat exchanger. Top brand – Danish quality. Including documentation, diagrams, and accessories.

Condition: used, Single column eccentric press KRUPP type PEKRD 125 h Machine No. 2861 Year of construction 1977 pressure force 125 ton. throat 400 mm table size 950 x 750 mm ram area 800 x 540 mm table opening 100 x 250 mm stroke adjustment 8 to 160 mm ram adjustment 100 mm Installation height of largest stroke at top max. 550 mm Njdpedzqddofx Aanedf Stroke rate 60 strokes/min. Table height above floor 800 mm Motor power 10 kW Mains connection 380 Volt, 50 Hz - Hydraulic overload in ram - Compressed air clutch-brake combination ORTLINGHAUS - ram weight balancing cylinder - motorized ram adjustment - Table plate with ball rollers - Two-hand operation - grease central lubrication HELIOS - stroke counter - UVV 7n 5.1 §4a, paragraph 2 No. 3b for manual insertion work Space requirement L x W x H 2300 x 1800 x 3200 mm weight approx. 10 ton. good condition (very little used)

Condition: new, Working width 3500 mm Working height 2300 mm Ndedpfxed Ih H So Aansf Number of cylinders 4 St.

Year of construction: 2025, condition: new, Big Bag rack Ndodpfoxnbk Dex Aanef Cross beam for Big Bag for forklift/crane Pneumatic discharge Aluminum container for material collection With sieve and suction connection with filter

Condition: new, Bernardo Frame Press HRP 3000 Robust and torsion-resistant hydraulic frame press with high-quality pressure cylinders. Whether it is used for furniture or door production, block or frame gluing, the high pressing force of 2,000 kg per cylinder and precise, angle-accurate pressing of large-sized components enable all tasks to be carried out effortlessly. Technical Specifications Working length: 2,400 mm Working height: 1,550 mm Cylinder stroke: 95 mm Pressing force: 2,000 kg Vertical hole pitch: 50 mm Horizontal hole pitch: 160 mm Overall length: 3,250 mm Overall height: 2,070 mm Frame depth: 925 mm Weight: approx. 315 kg Features • Versatile use, e.g. for frame, window, and door production • Robust frame press with solid steel construction • Centralized control of the hydraulic cylinders including pressure gauge • Efficient gluing thanks to hydraulic design Nedpjxrnvbofx Aansdf • Pressure cylinders equipped with rocker plates as standard Scope of Delivery • 4 movable pressure beams, each with one vertical hydraulic cylinder and counter support • 1 movable pressure beam with two horizontal hydraulic cylinders • 1 movable, adjustable pressure yoke

Condition: used, Year of construction: 1992, Used machine Year of manufacture: 1992 Features and technical specifications: Electro-hydraulic frame press control Pressing force up to 1,200 kg Two movable longitudinal pressure beams mounted with double ball bearings and guide rails These rails allow for continuous height adjustment of the cylinders The press cylinders can be adjusted via quick-release pressure lever with automatic locking Two electro-hydraulic control valves (with 3 switching stages) operated by hand levers This allows for precise pressing and assembly of even the most complex frame constructions Working height x working length: 2,000 x 3,000 mm Equipped with 3 vertical pressure cylinders Equipped with 2 horizontal pressure cylinders Stroke of pressure cylinders: 120 mm Three-phase motor: 1.3 kW Pressure control unit / pressing force adjustable: 0 - 60 bar Space requirement: 3,950 x 900 x 2,550 mm Weight: approx. 620 kg Availability: short-term Nodpfowwxywsx Aanedf Location: Flörsheim

Condition: used, Sterilizable universal filter for sterilization filtration. Stationary sheet filter with square filter elements in a vertical row arrangement, hydraulic filter sheet pressure. Hydraulic control from built-in electrical control panel. Additional title: Sterilisation filter, years of manufacture 1979-2010 Capacity approx.: 750 hl/h Sheet filter - filtration area approx. 356 - 493m2 Operating pressure: 8 bar Power: 6 kW Voltage: 220/380 V Frequency: 50 Hz Length: 10100 mm Nodpfx Aexbn N Heanodf Width: 1320 mm Height: 1750 mm Formats: Square filter elements Operation / Control: Vertical row arrangement Material: Stainless steel Position: Horizontal Base construction: Frame Features: Filter sheets; hydraulik filter plate compression; hose pump Layer patterns: Vertical row arrangement

Condition: new, Working width 3500 mm Working height 2300 mm Number of cylinders 4 St. Stable frame welded construction of thick-walled Special hollow profiles , sliding table and pressure beam with 50 mm hole pattern . On the left side continuous abutment for grouting the wide , lower abutment in 2 levels. Vertical pressing cylinder on specialty bar with one- quick adjustment with weight compensation in the 50 mm hole pattern adjustable in height. Long sliding table ensure the Ndedpod Ih H Nsfx Aanef continuous recording of high jacking forces . Fast, smooth width adjustment with ball bearing Carriage with central fixation in 50 mm hole pattern. Upper horizontal press cylinder infinitely adjustable in height and equipped with counterbalance . Lower horizontal pressing cylinders with bore for two abutments levels without weight compensation . Abutment and pressure plate depth 100 mm Machine controlled electro -hydraulic with 2 pieces vertical pressure cylinders d = 60 mm, stroke 120 mm, single-acting, with counterbalance and One-hand height adjustment, 2 piece horizontal pressure cylinders d = 40 mm stroke, 120 mm single-acting ( 1 x with weight compensation ), 2 hand control valves , Pressure gauge, pressure regulator valve 1 of 20 to 150 bar corresponds to 550 4200 kg compression force vertically. With 3 kW three-phase motor for 400 volts , 50 Hz Operating voltage. Complete with electrical connection . Painting RAL 7035 anthracite gray with light gray RAL 7016 . (technical details according to manufacturer - without guarantee ! ) The detailed technical description can be found in the attached pdf file

Condition: used, Kieselguhr frame filter. Sterilizable universal filter for liquid filtration with kieselguhr. Stationary filter with square elements in a vertical row arrangement. Hydraulic filter sheet pressing with hydraulic control on the built-in electrical control panel. Additional title: kieselguhr filter, years of manufacture 1979 - 2010 Capacity approx.: 850 hl/h Kieselguhr filter - filtration area approx. 174 - 242m2 Operating pressure: 8 bar Nodpfx Aaexbn Ntenjdf Power: 6 kW Voltage: 220/380 V Frequency: 50 Hz Length: 10100 mm Width: 1320 mm Height: 1750 mm Formats: Square filter elements Operation / Control: Built-in control panel Material: Stainless steel Position: Horizontal Base construction: Frame Features: Filter plates; filter frames; collection tray with removal screw; hydraulik filter plate compression; hose pump Layer patterns: Vertical row arrangement

Condition: new, Working width 3500 mm Nsdpfx Aasd Rzc Rsnsdf Working height 2300 mm Number of cylinders 4 St.

Condition: used, Working width 3600 mm Working height 2600 mm Number of cylinders 5 St. loading dimensions L x W x H 4400 x 1150 x 2970 mm weight 3000 kg Schafberger + Sproedhuber Bavaria Frame Press ----- Machine is overhauled by us before delivery. With automatic pressing cycle + manual control for tenon + slot corner joints. CE-certified version Basic machine in the strongest welded frame construction, with thick-walled special hollow profiles. Guideways for the pressure beams for the press corners in a low-wear machined design. Fast, smooth, manual width adjustment via ball-bearing carriages, fixed in a hole pattern. Height adjustment and pressing via long-stroke cylinders in a single work cycle. Right-side press corners with integrated horizontal cylinders, therefore no vertical positioning of the horizontal pressure cylinders necessary, thus avoiding cylinder collisions. Lower abutment adjustable in several positions for the most favorable insertion height. 3 vertical press cylinders, double-acting, stroke adjusted to working height 2 horizontal press cylinders, double-acting Abutment and pressure plate depth 80 mm Working size: Length x Height = approx. 3,600 mm x 2,600 mm Space requirement/loading dimensions: approx. 4,400 mm x 1,150 mm x 2,970 mm (Length x Width x Height) Option: ALWA pressing supports for sloped windows (Technical specifications according to the manufacturer – no guarantee! Images may differ from the Ndjdew T Un Ujpfx Aanof original. Prices are net, plus VAT (domestic))

Condition: new, Working width 4500 mm Working height 3000 mm Number of cylinders 6 St. Dimensions (L/W/H) 5500x1400x3550 mm Weight 3000 kg S&S frame press Bavaria 2000 L ----- With automatic pressing cycle + manual control for corner connections tenon+slots and dowel connection/mortised tenon, can be switched using a selector switch on the control cabinet. With basic equipment for optional use of counter profiles if the sash is rebated on the loose part. CE version Basic machine in the strongest frame welded construction, with thick-walled special hollow profiles. Guideways of the pressure beams for the press corners in a low-abrasion machined version. Fast, smooth, manual width adjustment using ball-bearing carriage, fixing in 50 mm hole grid, optional motorized width adjustment with hydraulic clamping (at an additional cost). Height adjustment and pressing using long-stroke cylinders in one work cycle. Right-hand press corners with integrated horizontal cylinders, therefore no vertical positioning of the horizontal pressure cylinders is necessary, which avoids cylinder collisions. Lower support can be adjusted in several positions to the most suitable insertion height. 3 KW compact hydraulic system with integrated control block, variable pressure control from 20 - 120 bar, pressure gauge Control via touch button with separate control circuits for the vertical and horizontal press cylinders, mounted on a freely movable control panel. 2 vertical press cylinders, double-acting, stroke adapted to working height, piston diameter 60 mm Pressure force per cylinder max. 2100 kg 2 horizontal press cylinders, double-acting, 80 mm stroke, piston diameter 40 mm Pressure force per cylinder max. 1250 kg Abutment and pressure plate depth 100 mm Control cabinet on the machine base on the left, 400 volts, 50 Hz Machine with ready-to-connect plug 16 A Paint: RAL 7035 light gray with RAL 7016 anthracite gray Working size: length x height = 4,500 mm x 2,750 mm Note: Actual working size: 4,500 x 3,000 mm (length x height) Space required: 5,500 mm x 1,400 mm x 3,550 mm (LengthxWidthxHeight) Article medium pressure bar complete with pressure cylinder, pressure hose and shut-off valve up to 2,750 mm high Note: actual working height: 3,000 mm Article Nodpswg Hr Tjfx Aanjdf Individual pressure control for medium pressure bar, pressure control range up to max. 100 bar (For pressing cross-bar windows) Article infinitely height-adjustable cross pressure device, complete with pressure cylinder and abutment, throttle and shut-off valve Article Individual pressure control for cross pressure device pressure control range up to max. 100 bar (For pressing cross-bar window) Article Shut-off valve on the 3rd vertical cylinder Article Shut-off valve on the upper horizontal cylinder Article x slanted window control for vertical cylinder Article x pendulum pressure plates attachable for pressing up to 60 degrees Article Double pendulum pressure plate for pointed window (triangle) Article x extension for p...