Used Autoclave for sale (114)

Condition: used, This listing is for the RAININ Pipet-Lite XLS L-200 12 Chanel Pipetter (Button Colour-code Green) The unit is in full working condition and is ready for immediate use Key Features LiteTouch™ System (LTS) incurs significantly lower tip‑ejection and plunger forces—reducing repetitive strain risk Itsdpoxv Diljfx Adwob Ergonomic build: smooth plunger springs, “stiction‑less” seals, and a sure‑fit handle for all‑day comfort RFID tagging: each unit stores service/calibration data, aiding lab inventory and GLP compliance Fully autoclavable shaft and tip ejector—easy to clean and maintain Performance Specs (20–200 µL range) Increment: 0.2 µL manual adjustment. Accuracy: ±0.8% (~1.6 µL at full volume). Precision: ≤0.3% (~0.6 µL)

Condition: used, This listing is for the Churwell PBI air sampler SAS Super with case and charger The unit is in full working condition and is ready for immediate use Churwell PBI Air Sampler SAS Super 100 L with Case and Charger The Churwell PBI Air Sampler SAS Super 100 is a widely used microbiological air sampling device designed for cleanrooms, pharmaceutical environments, operating theatres, and laboratories. It enables reliable air monitoring by collecting air-borne microorganisms onto contact plates or Petri dishes. Key Features: Sampling Principle: Designed to collect airborne microorganisms on microbiological agar by impaction, produced through controlled air aspiration. High Sampling Efficiency: The SAS Super models—such as the SAS Super 100 and SAS Super 180—can collect particles down to 1 micron. The SAS Super 100 offers a sampling rate of 100 liters of air per minute. Digital Control: Features a digital interface for setting sampling volume, duration, and storing operator information. Battery-Powered: Equipped with a rechargeable battery, allowing for multiple sampling sessions on a single charge. Comes with a charger included. Portability: Lightweight and easy to carry with a protective case, ideal for field use or portable cleanroom monitoring. Technical Specifications: Air Flow Rate: 100 liters per minute Dimensions: 10.5 × 11 × 29 cm Weight: 1.75 kg Itedexv Dpxjpfx Adweb Data Management: Some models support data logging and CFR 21 Part 11 compliance (varies by version) Materials: Typically stainless steel or autoclavable materials for sterile environments Accessories and Options: Aspirating heads (stainless steel or disposable) Tripods and stands Calibration adapters USB data cable (for models with digital logging)

Condition: used, This listing is for a used Pipetman Gilson P20 (2–20 µL) Adjustable Volume Pipette The unit is in full working condition and is ready for immediate use Used Pipetman Gilson P20 (2–20 µL) Adjustable Volume Pipette Description: Up for sale is a pre-owned Gilson Pipetman P20 adjustable volume pipette, ideal for precise liquid handling in the 2–20 µL range. Renowned for its accuracy, durability, and ergonomic design, this pipette is a staple in molecular biology and analytical labs. Specifications: Model: Pipetman P20 (UL) Volume Range: 2 to 20 µL Increment: 0.2 µL Pipette Type: Adjustable volume, air-displacement Iedpsxv Dryefx Adwjtb Tip Compatibility: Standard universal tips (200 µL size) Condition: Gently used, fully functional Calibration: Last calibrated [insert date if known, or "may require recalibration"] Features: Easy volume adjustment with secure locking system Lightweight and ergonomic for comfortable extended use Durable construction built for long-term performance Autoclavable tip ejector and lower part (refer to manufacturer guidelines) Included: Pipetman P20 micropipette only (No box or documentation included) Notes: The pipette has been cleaned and tested for accuracy. Recommended calibration before critical use.

Condition: used, This listing is for the Gilson PIPETMAN P10 1-10uL Single Channel Pipette with Metal Ejector Colourcode Red The unit is in full working condition and is ready for immediate use Itsdpfsxv Dt Dex Adweb The traditional “L” version: robust, bomb‑proof build, fully autoclavable stainless steel tip‑ejector, volume adjustable 1–10 µL. PVDF and stainless exterior, designed to be durable in tough lab setting Fully adjustable 1–10 µL range with fine decimal display Dual-position metal tip ejector supports D10 and DL10 tips Low pipetting resistance, especially in G-series (≈2 N force) PVDF body + stainless steel parts for chemic

Condition: used, This listing is for the Avestin EmulsiFlex-C5 for homogenizer with sealed toolings and spares The unit is in full working condition and is ready for immediate use EmulsiFlex-C5 High Pressure Homogenizer The Avestin EmulsiFlex-C5 is a high-pressure, pneumatically powered homogenizer designed for laboratory-scale applications. It is ideal for processing small to medium sample volumes, from 7 mL up to 5 L/h, depending on the pressure applied. How It Works: High Pressure Homogenisation High pressure homogenisation is an efficient and easy-to-use technique for cell disruption and liposome/emulsion processing. The principle involves pumping the sample through a valve with a small aperture. The sample transitions from very high pressure (up to 30,000 psi) on the pump side to atmospheric pressure on the outlet side. This sudden drop in pressure creates intense shear forces, disrupting cell membranes or dramatically reducing liposome/emulsion sizes. For cells, the pressure-induced shear forces rupture the membranes, effectively lysing the cells. For liposomes and emulsions, this process reduces their size from micron to nanometer range, often resulting in uniform particles with narrow size distributions. Unique Features of the EmulsiFlex-C5 Dynamic Homogenising Valve The C5 uses a dynamic homogenising valve, which maintains constant pressure during sample processing. This consistency ensures the formation of highly uniform liposomes and micro-emulsions, with tight particle size distributions. Efficient Cell Disruption Most cells (including E. coli) can be lysed in a single pass, minimizing over-processing and reducing the risk of protein denaturation or degradation. Pressure Range: Adjustable from 500 to 30,000 psi Flow Rate: 1–5 L/h depending on pressure Minimum Sample Volume: 7 mL Holdback Volume: Less than 1 mL Temperature Control: Can be used with ice baths, external chillers, or in cold rooms Autoclavable: Easy cleaning and sterilization (SIP-compatible) Compact Size: 430 × 160 × 320 mm, 25 kg Power Source: Requires compressed or bottled air. For most applications (e.g., E. coli disruption or liposome formation), 100 psi air pressure is sufficient. Applications Disruption of bacterial, yeast, algal, insect, or mammalian cells Nano-sized liposome and emulsion formation Particle size reduction in pharmaceuticals, cosmetics, and food products Liposomal drug delivery systems Efficient homogenisation for biochemical and biophysical research Iedpfoxhgawjx Adwstb

Condition: used, This listing is for the Gilson Pipetman L P10mLL 1-10ml The unit is in full working condition and is ready for immediate use The Gilson Pipetman L P10mLL is a precision liquid handling instrument designed for laboratories requiring reliable and ergonomic pipetting in the 1–10 mL volume range. Ideal for both routine and high-precision applications, this pipette features advanced design enhancements for improved comfort, control, and durability. Key Features: Adjustable Volume Range: 1–10 mL for a wide variety of applications Plastic Tip Ejector: Corrosion-resistant, ideal for working with harsh or volatile chemicals Ergonomic Design: Lightweight and balanced to reduce fatigue during extended use Volume Locking System: Prevents accidental volume changes during pipetting Fully Autoclavable: Ensures sterility and easy decontamination Iedpfx Asxv Drtsdwjtb 2D Identification Code: Laser-marked DataMatrix for traceability and inventory management Exceptional Accuracy and Precision: Built to meet ISO 8655 standards Applications: Cell culture and media preparation Buffer and reagent transfers Clinical, research, and industrial laboratorie

Condition: used, This listing is for the Gilson PIPETMAN P1000 100-1000uL Single Channel Pipette with Metal Ejector The unit is in full working condition and is ready for immediate use Key Features & Specifications Volume Range: Fully adjustable from 100 to 1000 µL — ideal for a wide range of liquid handling needs Precision & Accuracy: Itjdpfx Adsxv Dtdsweb Systematic (bias): at 100 µL ±3 µL, at 500 µL ±4 µL, at 1000 µL ±8 µL Random (precision): ≤0.6 µL at 100 µL, ≤1 µL at 500 µL, 1.5 µL at 1000 µL Construction: Built with durable PVDF and stainless steel components — trusted for reliability, robustness, and long lifespan Ergonomics: Designed for comfortable use with reduced pipetting forces to minimize hand fatigue during prolonged sessions Maintenance: Easy to dismantle with an autoclavable tip holder and ejector, ensuring convenient cleaning and decontamination Metal Tip Ejector: Durable metal ejector reduces tip ejection force and enhances longevity

Condition: used, This listing is for an Eppendorf BioFlo 320 Glass Vessel Bioreactor 5L SS Dished Bottom M1379-1001 The unit is in full working condition and is ready for immediate release Key Features Material: Autoclavable borosilicate glass vessel with a stainless steel headplate. Bottom Design: Dished stainless steel bottom for rapid heat transfer. Drive Options: Compatible with both magnetic and direct overhead drive systems. Impeller Options: Supports various impellers including Rushton, pitched blade, marine blade, spin filter, cell lift, and packed-bed impellers. Port Configuration: Multiple industry-standard headplate ports for flexibility in process design. Itjdsxv D Ihjpfx Adweb Temperature Control: Suitable for both rapid and gentle temperature control processes.​ Applications This bioreactor is ideal for applications such as:​ Cell culture and microbiology research. Laboratory and pilot-scale fermentation of aerobic and anaerobic bacteria, yeasts, and fungi. Cultivation of mammalian, insect, and human cell lines. Specialized applications like stem cell culture or biofuel/biopolymer development. Packed-bed impeller use for vaccine production in anchorage and non-anchorage dependent cell lines. Suitable for batch, fed-batch, and continuous processes. Validation packages available for GMP-regulated processes

Year of construction: 2014, condition: used, This listing is for 1 of 2 Mueller PyroPure P7310 Pure Steam Generator. The unit is in full working condition and is ready for immediate release. This Unit was installed new in 2015 by Freestead Process Technology. The “Turned on Time”of the unit is 65,000 hours, but as this unit is 1 of 2 generators in an alternating system it does not indicate the "Steam Production Time". The sites steam requirements were low therefore the unit is in immaculate condition. They have full maintenance records backed up on their electronic technical system supplied as an extra by Freestead. This Unit is fitted with a Allen Bradley Compact Logix PLC and Panel View plus 1000 HMI's The Unit is supplied with- ⦁ Feed water pump system ⦁ Pure steam condensate sampling system ⦁ Pure steam analyser ⦁ Stainless steel sheathing and frame ⦁ Feed water analyser ⦁ Degasser Itedpfxexv Af So Adweb The Mueller PyroPure P7310 Pure Steam Generator is a high-performance system designed to produce pyrogen-free pure steam suitable for the most demanding applications, such as pharmaceutical production, biotechnology processes, and healthcare sterilization. Built to meet or exceed U.S. Pharmacopoeia (USP) standards, the P7310 combines precision engineering, advanced technology, and robust materials to ensure consistent performance and reliability. They are CE marked and compliant with 3.1B material certification. The terms pure steam and clean steam are often used interchangeably in the pharmaceutical industry. However, not all equipment marketed as clean steam generators are up to the task of producing WFI quality pharmaceutical pure steam. Mueller pure steam generators use a tangential nozzle to provide separation of impurities from incoming feed water, producing pyrogen-free steam that, when condensed, meets USP requirements for water for injection. Key Benefits Superior Steam Quality: Produces pyrogen-free steam that meets USP requirements, ensuring safety and regulatory compliance. Optimized for critical applications like autoclaves, clean room humidification, and steam-in-place (SIP) sterilization. Achieves a 5 Log reduction in contaminants, which corresponds to a 99.999% reduction in microbial populations. This level of reduction ensures the highest degree of sterilization, making it ideal for pharmaceutical and biotechnology applications where absolute purity is critical. Efficient Design: External evaporator allows easy access for inspection and maintenance, reducing downtime. Separation column has no internal components requiring maintenance, eliminating potential for bacterial growth. Efficient heat transfer with a double-tube sheet evaporator minimizes stress cracking and maximizes performance. Ease of Maintenance: All critical components can be serviced with only 24" of clearance around the system. Fully drainable design prevents standing water, reducing contamination risks. Polished 316/316L stainless steel construction ensures durability and easy cleaning. Enhanced Operational Features: Minimal instrumentation is required, reducing complexity and operational costs. Simplified control with an Allen-Bradley PLC system, compatible with Ethernet for integration with facility systems. Certified elastomers (USP Class VI) provide enhanced compatibility with feed water and product. Specifications Performance: Pure Steam Capacity: from 0 to 700 kg/hr at optimal feed water conditions. Operating Pressure Range: Pure steam output pressure up to 50 psig. Mater...

Condition: used, This listing is for the RAININ Pipet-Lite XLS L-1200 8 Chanel Pipetter (Button Colour-code Blue 100-122 LTS The unit is in full working condition and is ready for immediate use Isdpfx Aexv Duhodwjtb Key Features LiteTouch™ System (LTS) incurs significantly lower tip‑ejection and plunger forces—reducing repetitive strain risk Ergonomic build: smooth plunger springs, “stiction‑less” seals, and a sure‑fit handle for all‑day comfort RFID tagging: each unit stores service/calibration data, aiding lab inventory and GLP compliance Fully autoclavable shaft and tip ejector—easy to clean and maintain Performance Specs (20–300 µL range) Increment: 0.2 µL manual adjustment. Accuracy: ±0.8% (~1.6 µL at full volume). Precision: ≤0.3% (~0.6 µL)

Condition: used, This listing is for a Thermo Scientific Heratherm IMH400-S Incubator The unit is in full working condition and is ready for immediate use Overview The Heratherm IMH400‑S is part of the Heratherm Advanced Protocol Security line of microbiological/laboratory incubators. Ijdpfjxzh H Ejx Adwstb It is designed for demanding applications where both temperature performance and safety/security of samples are important. The “Security” in its name refers to added features such as a lockable door, alarms, and a high‑temperature decontamination cycle. ----- Key Specifications ParameterValue / RangeNotes / CaveatsInternal Volume / Capacity~ 381 litres (≈ 13.5 cu ft) ThermoBid+2Some listings use “400 L” as a rounded designation +1Internal External Dimensions (W × D × H)~ 778 × 770 × 1,545 mm (30.6 × 30.3 × 60.8 in) Includes casters, housing, etc. +2 Temperature RangeAmbient + 5 °C to 105 °C +3This allows use both for incubation and drying protocols Temperature Stability / Uniformity±0.2 °C (at 37 °C) typical +2ThermoBid+2Some versions report ±0.1 °C stability under ideal conditions Convection / Airflow Mechanical convection; adjustable fan speed (often 10% to 100%) Ensures even temperature distribution; users can tune speed to application needs Decontamination Cycle140 °C decontamination for ~6 hours This is to reduce contaminating microorganisms in the interior without needing to remove all fittings for autoclaving shelves included; up to ~39 positions maximum Shelves are removable; spacing adjustable Power / Electrical~1380 W consumption Common variants: 230 V, 50/60 Hz Weight / Mass~ 144 kg Heavy unit, so needs stable flooring and handling during installation

Condition: used, Year of construction: 1990, functionality: fully functional, total height: 11,000 mm, total width: 4,800 mm, tank capacity: 1,66,500 l, TECHNICAL SPECIFICATIONS - Flat bottom tank Iodpfxsxnwnfe Adwetb - Brand: CSC - Material: stainless steel - Capacity: 166,500 litres - Interior finish: 2B - Exterior finish: Brushed ROOF - Lifting rings - 1 central chimney with 500 mm stainless steel hatch with clamping arm - 1 safety valve RING - 1 DN70 filling pipe with valve - 1 oval stainless steel autoclave door 310×420 mm - 1 DN70 stainless steel ball drain valve with sludge trap - 1 level gauge BOTTOM - Flat - 1 DN70 stainless steel butterfly drain valve - 1 DN50 stainless steel butterfly drain valve with decanter elbow - 6 fixing brackets for base plate DIMENSIONS - Diameter: 4800 mm - Height: 11000 mm

Condition: used, functionality: fully functional, usable tank capacity: 10,200 l, total height: 4,200 mm, inner diameter: 2,000 mm, TECHNICAL SPECIFICATIONS - Conical bottom tank on legs - Brand: RURALINOX - Material: stainless steel - Capacity: 10,200 litres RING - 1 ladder support bar - 1 lifting tube - 1 door bar - 1 oval autoclave door - 1 tasting tap Itodew Tl T Ispfx Adweb - 1 support and level tap BOTTOM - Conical - 1 total drain valve on square flange - 4 stainless steel legs with plates DIMENSIONS - Diameter: 2000 mm - Height: 4200 mm

Condition: used, Stainless Steel Food-Grade Storage Tank – 100 m³ (304L) – BSL Manufacturer BSL Type Horizontal stainless steel storage tank, large capacity, food-grade design. Industrial Applications - Storage of food-grade liquids (water, juices, wine, syrups, oils, dairy products) - Beverage and food processing industry - Buffer tank for production lines - Light chemical or pharmaceutical storage compatible with food standards Main Technical Specifications - Capacity: 100,000 liters (100 m³ / 1,000 hectoliters) Itsdpfx Adox A It Ujwsb - Material: Stainless steel 304L (food-grade) - Dimensions: - Diameter: 3.00 m - Height: 3.70 m - Overall length: 15.00 m - Top fittings: - DN 500 dome - Vent - DN 80 filling connection - Bottom fittings: - Autoclave door - DN 80 drain with ball valve - Level gauge - DN 80 decantation drain with valve - Compliance: Food-grade certified - Location: Saint-Gilles (30800), France - Transport: Loading and exceptional transport available nationwide - Condition: Second-hand, very good condition - Availability: Immediate Machine Usage The BSL 100 m³ stainless steel tank is designed for large-volume storage of food-grade or non-corrosive industrial liquids, ideal for beverage processing, water treatment, and bulk storage operations. Features / Differentiators - Built by BSL, a reference in industrial stainless steel manufacturing. - Horizontal construction ensures high stability and easy maintenance. - Equipped with multiple fittings for filling, draining, and level control. - Full 304L stainless steel structure for complete food compatibility. - Large 100 m³ capacity suitable for centralized storage applications. - Optional loading and exceptional transport service available on demand.

Condition: used, functionality: fully functional, total height: 5,100 mm, total width: 2,800 mm, pressure: 1 bar, tank capacity: 19,800 l, inner diameter: 2,800 mm, TECHNICAL SPECIFICATIONS - Vertical cylindrical tank Itodpfx Adsxz A Htewjb - Capacity: 9,400 l + 10,400 l = 19,800 litres - Material: stainless steel ROOF - 1 off-centre chimney at the front with hatch RING - 1 complete level tube for each of the two compartments - 1 oval autoclave door for each of the two compartments - 1 tasting tap on each of the two compartments - 1 rectangular door on the upper compartment - 2 partial drain valves on each of the two compartments - 1 cooling circuit on each of the two compartments BOTTOM - Conical - 4 feet - 1 total drain valve DIMENSIONS - Diameter: 2800 mm - Overall height: 5100 mm

Condition: used, Year of construction: 2006, functionality: fully functional, Lisec laminating line with Scholz autoclave and Kaeser compressor. The line is disassembled but fully functional. The photos show both the period when it was operational and the current situation with the disassembled components. Itodpfx Adjw Tyk Iswsb

Condition: used, No. 3213 Thermal treatment system / vacuum dryer WTT Used, year of construction 2017 Thermal treatment system / thermal chamber for the modification of wood The WTT thermal chamber is a system for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system has a powerful energy and heat transfer system and works with a gas or oil-fired boiler system that uses thermal oil as a heat transfer medium. Technical data: Capacity: 5950 - 9900 m³ of wood per year (for 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions: 10500 x 1300 x 1100 mm LWH Minimum board thickness: 10 mm Power connection: 3 x 400 V, 50 Hz + zero + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heat output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel duplex EN 4462 Door opens hydraulically, with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Working temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized sheet steel Main components: 1. autoclave, in which the heat treatment takes place 2. vacuum system that sucks the air out of the autoclave before heat is applied 3. energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. nitrogen generator 6. gas cooler system Heating and cooling system: Heat exchanger: 8 units (4 on each side) Material: Stainless steel pipes (seawater resistant) Total floor area: 165 m² Cooling water consumption: 1000 l/batch (not contaminated, only heated) Control and operation: Control system: WTT ExoT (fully automatic) 22” color monitor, IBM computer, printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special equipment: Hydraulic rail bridge for convenient transportation of wooden trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Fuel oil tank (4000 l) with measuring system Insulated 20 foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6000 mm length) Functional description: 1. filling the autoclave with wood 2. creating a pre-vacuum 3. filling with gas 4. heating 5. modifying Isdpfx Ajv Si Szedwetb 6. cooling 7. pressure equalization 8. creating a post-vacuum / drying 9. pressure equalization 10. emptying Certified EC Pressure Equipment Directive (PED) 97/23/EF Construction EN 13445 Sale on behalf of customer, from location near 5020 Salzburg (Austria), without dismantling, transportation and assembly Dismantling, loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, functionality: fully functional, tank capacity: 29,800 l, total height: 5,000 mm, inner diameter: 3,100 mm, TECHNICAL SPECIFICATIONS - Conical bottom tank on legs - Material: stainless steel - Capacity: 29,800 litres Itodpsw Tl R Tefx Adwob RING - 1 ladder support bar - 1 lifting tube - 1 support and level tap - 1 door bar - 1 oval autoclave door - 1 partial drain valve on square flange BOTTOM - Conical - 1 total drain valve on square flange - Stainless steel legs with plate DIMENSIONS - Diameter: 3100 mm - Height: 5000 mm

Condition: new, Oxygen Probe for Sterile Conditions. The InPro 6800 dissolved oxygen sensor with 12 mm diameter body provides maximum accuracy and ultimate cleanability. Sensor for Hygienic Applications The sensor has been developed to comply fully with the EHEDG and FDA flat-surface recommendations for extremely high-level hygienic applications. Durable and Hygienic Design Itjdpfx Aeh Rulljdwjb The 316L stainless steel construction allows for CIP, steam sterilization or autoclaving in place. The sensor finish eliminates process contamination. Easy to Integrate The InPro 6800 DO sensor is easy to integrate into your process. Its watertight VP connector (IP68) helps ensure reliable measurements.

Condition: new, High Performance, High Accuracy pH & ORP. The InPro 3253i SG/120 is a digital, pre-pressurized, low maintenance ISM pH & ORP sensor combined with a temperature sensor for in-line measurement in demanding applications. The 120 mm version is optimal for short installation lengths. Optimized for Steam Sterilization The steam-sterilizable pH glass membrane of the InPro 3253i SG/120 makes it optimal for processes where sterilization or autoclaving are required. Low Maintenance and Easy-to-Use This digital pH sensor has Intelligent Sensor Management (ISM) technology, offering predictive diagnostics to reduce maintenance and calibration. Sterilizable and Autoclavable Itodpfx Adsh Rulhswob This sensor provides fast and precise pH and ORP measurement, even after repeated autoclaving and sterilization cycles.

Condition: good (used), Year of construction: 1966, machine/vehicle number: 352149, total width: 1,800 mm, total length: 4,800 mm, Autoclave used for heating rubber. The devices are complete, with full photo and paper documentation, inspection certificates, etc. Itodpfx Asd E Aqasdwsb Heating temperature 160 degrees Celsius. The price includes 3 pieces of Autklaw in a set.

Condition: ready for operation (used), Plant Liquidation – Complete Equipment for Tire Retreading For sale is a comprehensive production line for tire retreading, ideally suited for businesses specializing in tire renewal. ⸻ Machinery & Equipment • Buffing/Rasping Machine: Tread and casing preparation (roughening and buffing) • Repair/Skiving Station: Grinding and patching • Extruder/Filling Unit: Cushion gum processing • Cementing/Adhesive Station • Building/Banding Station: For precured tread application • Envelope/Vacuum Station: Envelope and sealing operations • Autoclave including accessories (tire rings, vacuum pump, pipelines, carts) Additional Workstations: • Casing Spreader / Inspection stand • Pressure & Leak Test Station • Final Inspection (Tread and Sidewall Check) Plant & Auxiliary Equipment: • Compressors (Kaeser & Atlas Copco brands) • Extraction and dust removal system at grinding stations • Tire and material carts, shelving units • Tool and small parts set (valves, gaskets, clamps) • Transport and cooling racks • Various vulcanization and operating accessories Documentation: Photos, parts list, and additional documents available on request ⸻ Condition & Delivery • Used, fully operational • Inspection possible at any time • Accessories available • Dismantling, loading, and shipment easily arranged • Shipping via freight forwarder possible ⸻ Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices net, plus 19% VAT. Subject to change and errors excepted. Itsdpfx Adsxk Tuaeweb

Condition: used, functionality: fully functional, Autoclaves are used for the sterilization of packaged products that must reach high temperatures (+100ºC) for the elimination or inactivation of pathogenic microorganisms. Continuous autoclaves: These are integrated within production lines. Containers enter the autoclave automatically and exit at the other end already sterilized. This enables much higher production volumes. Isdpfx Adswxwzpewotb - FMC-JBT rotary cooker-coolers: These consist of two or more bodies in which each sterilization phase is carried out. Measurements: Module 1: 9 m x 2 m x 2.30 m. Module 2: 9 m x 1.55 m x 2.30 m. Module 3: 13 m x 2.10 m x 2.30 m.

Year of construction: 2016, condition: ready for operation (used), A complete soup production line including can filling, sealing, and washing processes is available. 1) Steam boiler Loos, year of manufacture: 1990, max. operating pressure: 6bar, steam generation: 1250kg/h. Including gas burner Weishaupt, year of manufacture: 1990, max. power: 1730kW, adjustable pressure range: 5mbar-140mbar. 2) Autoclave Lubeca. Including 20 cooking trolleys and various intermediate racks. 3) Can washing machine W. Busser 521-1, year of manufacture: 1984. Including conveyor belt. 4) Can filling and sealing machine. Including conveyor belt. 5) Inkjet printer Linx 8900, year of manufacture: 2019. 6) Basket washing machine Hobart FUX-SAF, year of manufacture: 1990. 7) 2x cooking kettles A.S.T.A. Steiner, max. operating overpressure vessel/double jacket: 0bar/1bar, max. operating temperature vessel/double jacket: 100°C/119°C, volume vessel/double jacket: 300L/20L. 8) Can labeling system. An on-site inspection is possible. This is a complete system with conveying technology and peripheral equipment. Individual or partial sale of the units is possible upon agreement. Ijdpexliurjfx Adwjtb

Year of construction: 2012, operating hours: 75 h, condition: like new (used), This Vötsch Hephaistos Industrial Microwave Chamber has had extremely low hours usage during its life so far, on 75 hours .. having been installed and minimally utilized from time to time for a single research project at the University of Sheffield AMRC research department known as the “Factory of the Future”. Sold new for a price of approx 250,000.00Euro. Contact us now for an exceptional offer for this high tech unit in as new condition. VHM Hephaistos Industrial Microwave Chamber For Aerospace and Automotive Engineering The Research Project The VHM Hephaistos Industrial Microwave Chamber for component testing was developed in cooperation with the Karlsruhe Institute of Technology (KIT). It is the result of a joint development project sponsored by the German Federal Ministry of Education and Research (BMBF). Alongside KIT, the Composite Research Center of EADS in Munich, the Institute for Aircraft Design (IFB) at the University of Stuttgart, GNK Aerospace in Munich and Vötsch Industrietechnik were involved in the project. Microwave system The VHM Hephaistos Industrial Microwave Chamber from Vötschtechnik is an internationally patented system. Fast and energy-efficient production processes are possible by using microwaves. The microwave chamber is characterized by its hexagonal geometry with a very high field homogeneity. This is a major advantage when thermoforming fibre composites (CFRPs) in the aerospace and automotive industries. During the targeted volumetric heating of the products, the microwaves directly enter the material so that energy is delivered directly and the chamber does not require heating. This increases the heating rate and throughput, saving energy and time in addition. Reduced production costs This industrial microwave chamber guarantees you reduced costs due to shorter heating, process and cooling times required for curing CFRP components. Its material processing technology means the microwave can produce energy input into the component to be heated while the oven itself remains cold. In comparison to the process in autoclaves, the processing times are reduced by up to 50 %. Energy consumptions is reduced by up to 70%. Advantages: Possibility to use metal parts, such as conventional metal tools and feed systems, in the microwave field High degree of product quality thanks to the maximum homogeneity of the microwave fields provided by the hexagonal chamber structure. By using microwave absorbing materials, additional positive effects can be achieved Sizes from laboratory scale to large systems, e.g. as are required in the aerospace industry, can be achieved The modular design allows a flexible adjustment to your product Volumetric and selective heating for energy-efficient processes Precise heating of the products Hybrid systems, e.g. in combination with hot air Itjdpstvz Rfsfx Adwob