Used Distillation for sale (52)

Condition: used, Year of construction: 2004, Filling content - 150 ltr. Agitator - 0.75 kW Bubble - 800mm Overall height - approx. 270 cm Filling opening - approx. 35 cm Spout - approx. 20 cm Bedezx A A Nepfx Abtswt Tap - inch Smoke pipe - approx. 18 cm Fuel - wood / steam

Condition: good (used), Year of construction: 2007, power: 9.1 kW (12.37 HP), Manufacturer: Ilsa Multimatic Type: Topline 320 Designation: Cleaning machine Distillation module: VD160 Bjdpfx Asw I Ddhsbtowt Tank volume: 320 L Spin speed: 550 rpm Power: 9.1 kW Year of manufacture: 2007

Condition: ready for operation (used), Year of construction: 2018, Inlet medium: AP water, outlet medium: distillate, distillate outlet temperature: approx. 99°C, tank volume: 900l, number of preheaters/evaporator columns: 3/4, distillate production: 300l/h, pure steam production: approx. 70kg/h, operating modes: distillate production/pure steam production/WFI loop system sterilization, controls: Siemens SPS S7-300. The distillation unit was designed as part of an overall system but has its own control and automation and can be operated separately. Documentation available. An on-site inspection is possible. Bwodpfjygmcdsx Abtjt

Year of construction: 2006, condition: as good as new (ex-display), machine/vehicle number: 31331, DISTILLER DNP 2000 SEMI-AUTOMATIC STEAM DISTILLATION SYSTEM - PROTEIN-NITROGEN Raypa DNP-2000 Year of manufacture 2006, unused Protein-Nitrogen distiller based on the Kjeldahl method. Automatic, to analyse protein nitrogen in raw material samples or processed material for the food industry. Specific methods available. Results comply with regulations: EN/ISO, AOAC. NITROGEN DISTILLER – DNP-2000 Features • Twenty free user programs. • Additionally, the system has three fixed programs: – Ammonium sulphate test. – Preheating of the system. – Sample waste washing. Advantages • Optional kit for automatic titration. • Sample suction. • 20 user programs. • Pump calibration by end-user. • Steam generator with water level control. • Boric acid pump. • Open door sensor. Performance • Measurement range: from 0,1 to 200 mg of N. • Nitrogen recovery: ᐳ 99,5%. • Reproducibility: ± 1%. • Distillation time: 4 min/100 ml. • Cooling water consumption: 1,2 l/min. • Power: 2000 W (100%). Programmable parameters and values • Water for dilution: 0-240 ml. • OHNa solution: 0-240 ml. • H3BO3 solution: 0-240 ml. • Reaction time (delay): 0-30 min. • Distillation time: 0-30 min or indefinite. • Steam power regulation: 30-100%. Safety • Closed-door detection. • Digestion tube detection. • Over-temperature thermostat. • Uses in the food industry but also in oenology for vinification. • Documents: Manual instruction + mounting gaskets and socket • For the Romanian companies, there is the possibility of selling in installments. Price Euro 3.600 + VAT Ex Works Loaded of FCA: Oradea/Romania Irrtum, Änderungen und Zwischenverkauf vorbehalten / Bjdpefiliwofx Abtewt Subject to errors, changes, and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: good (used), Pharmatec 500-S4 Multistage pressure column distillation unit Bsdpfx Abjyfhtnotewt Stainless, designed for the production of sterile, non-pyrogenic water for injection (WFI), all mounted on skid, four column system, 660 l/h pressurized heating steam, 4Bar, adjustable controls, 3Ph

Condition: used, Year of construction: 2001, functionality: fully functional, Equipment: CE marking, Multi-purpose reaction system with a glass structure made of borosilicate glass, Büchi Glas Uster. The system consists of two multi-purpose units, each with one CR 101 reactor and one gas scrubber. These are two complete systems that can be configured and operated together or separately as individual units. We can design and adapt the configuration according to customer requirements, which also includes the system control. Bwedpfxsy Rkk Uj Abtjt The two CR 101 reactors have a working volume of 100 liters, with a maximum volume of 205 liters each. They are made with a steel enamel lower part that can be heated, and a glass upper part with a drive, mechanical seal, impeller agitator, and stirrer with a PT 100 temperature probe, all made of steel enamel. The original agitator drives were replaced in 2016 with an RWD-30-L ATEX drive from Büchi.

Year of construction: 2004, condition: excellent (used), Stainless Steel Fermenters / Storage Tanks - 39,000 L - Food Grade These ASTM 304 stainless steel tanks are highly versatile and ideal for the industrial storage or fermentation of wine, spirits, distillates, and craft beer. They are also perfectly suited for the essential oil industry to store floral waters (like rose or lavender distillate) and for water treatment facilities requiring large-capacity hygienic storage. Their conical bottom design ensures 100% full drainage and effortless cleaning, making them highly efficient for various food-grade and liquid processing applications. • Quantity: 6 units Bodjzud Iropfx Abtowt • Capacity: approximately 38 m3 (38,000 liters) each • Type: Vertical stainless steel tanks • External dimensions: • Diameter: 2.80 m • Height: 7.20 m • Material: Stainless steel (food grade), ASTM 240 type 304 / AISI 304 • Last used: 2017 • Condition: Good, stored empty • Location: Rosenovo, Sredetz Municipality, Burgas region, Bulgaria • Suitable for: wine, juice, beer, edible oils, food & beverage liquids or other liquids (they have been used for wine storage). PRICE IS PER UNIT. Available as a full lot or individually (Full lot price is 7000 EUR per unit). Loading assistance possible.

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, pressure: 0.5 bar, We are offering this refurbished Carl water bath still - column distillery, year of manufacture 2006. Com No.: 12 276 / REV 13 976 Year of manufacture: 2006 / Refurbished 2024 Filling volume: 110 l Max. operating overpressure: 0.5 bar Heating: electric heating elements Bsdoyux E Tspfx Abtewt Power: 30 kW Water bath jacket capacity: 180 l If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 2015, functionality: fully functional, Equipment: documentation/manual, Vacuum evaporator-concentrator for for the treatment of water-based liquids and effluents by low-temperature evaporation, forced circulation and external heat exchangers. Maximum nominal distillate production: 20,000 litres/24 h (834 l/h, ±10%). Boiler working volume: 1,540 litres. Approximate evaporation temperature: 30–60°C. Operating vacuum: 4–18 kPa absolute. Electrical supply: 400 V, three-phase, 50 Hz. Electrical power consumption: 13 kW. Rated current: 29 A. Specific electrical consumption: 16 Wh/l ±10%. Required thermal power: 593 kW. Hot-water inlet temperature: 80–90°C. Cooling-water inlet temperature: 10–30°C. Compressed-air pressure: up to 8 bar. Approximate empty weight: 2,550 kg; maximum operating weight: 4,500 kg. Approximate transport dimensions: 4,850 × 2,000 × 2,760 mm. Main construction in stainless steel. Equipped with an evaporation chamber, liquid-ring vacuum pump, circulation pump, heating heat exchanger, condenser, distillate tank and discharge pump, pneumatic valves, PLC, touchscreen and instrumentation for level, pressure, temperature and flow measurement. Maximum permissible concentrate density: 1.3 kg/dm³. Maximum viscosity: 10 cP. Maximum recommended particle size: 800 microns. Maximum inlet-liquid temperature: 70°C. Noise emission below 80 dB(A). Not suitable for flammable, explosive, radioactive or chemically incompatible liquids. Bwodpszvdftjfx Abtjt

Condition: refurbished (used), Year of construction: 2004, operating hours: 22,000 h, functionality: fully functional, machine/vehicle number: 014404, total width: 2,600 mm, total length: 1,750 mm, total height: 2,350 mm, maximum load weight: 50 kg, tank capacity: 230 l, compressed air connection: 6.5 bar, input voltage: 380 V, year of last overhaul: 2026, Hösel Solvacs-2 with additional distillation unit. Bwedpfxezln Iqs Abtet The system and the distillation unit have both undergone a professional general overhaul. The system is connected to the power supply and is ready for inspection and a test run. The system requires external cooling.

Condition: used, Year of construction: 1993, Previous use: distilled water Capacity : 100 L/H Material: glass Year : 1993 The unit includes : Bwedpfx Abjx Rz Nnjtst Level regulator Electrical control box Frame Pump Coil heat exchanger (1.2 bar max) Electric tank heater 5000W 200 litre glass tank Tubular exchanger (1.2 bar max) Photoelectric level Boiling chamber Stainless steel coil boiler: stainless steel 316 (1.2/1.5 bar max)

Year of construction: 1999, condition: good (used), For sale is a water treatment plant of make ENVOTECH and type 0320 from 1999. In 2016 a new reaction tank of the brand Leiblein, made of stainless steel, with the dimensions of 500*500*400 mm was added. The plant is fully functional and the contact details of the competent service technician are available and can be forwarded at the time of purchase. Technical data & information: - Executed in stainless steel - Including oil separation by coalescence principle - Including automatic cleaning - Built-in pump for waste water, concentrate and distillate Bjdopl Tqtspfx Abtjwt - Frequency control of the compressor motor - Type: 0320 - Rated capacity l/h: 320 Energy consumption - In operation: 25 kW - Maximum power: 35 kW Supply voltage: 3*400 V - 50 Hz Dimensions lxwxh: 245x155x265 Face: ca 2600 kg Sound pressure level: 75 dB All data refer to operation with water On request, loading and shipping can be organized throughout Europe. Prices plus VAT Viewing by appointment possible. Contact us, our team is happy to help you. Ch3mj0l3eg Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us please visit our website

Year of construction: 2006, condition: like new (used), Details on request Bwedjfla Emjpfx Abtjt

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: Z00004955, input voltage: 400 V, Equipment: documentation/manual, Professional essential oil and hydrosol extractor manufactured by Albrigi Luigi S.r.l., model DRAGO PRO 250L. This machine is designed for steam distillation of medicinal plants, aromatic herbs, flowers, and plant-based raw materials. The unit is in excellent condition, fully functional, used very little, and carefully maintained. Key technical specifications: Manufacturer: Albrigi Luigi S.r.l. Model: DRAGO PRO 250L Bsdpfxey S A S To Abtewt Type: essential oil extractor / steam distillation unit Capacity: 150–250 liters Year of manufacture: 2019 Power supply: 380/400 V Phases: 3 phases Frequency: 50/60 Hz Power: approximately 18.75 / 19 kW Structure: stainless steel Machine on wheels User and maintenance manual available CE marking present CAREL humiSteam x-plus system visible on board the machine Machine condition The machinery is in very good overall condition, fully functional, and used very little. Stored in a suitable environment. It shows normal aesthetic signs of use, without affecting its functionality. Reason for sale Sale due to disuse following a change in the production line. Available for viewing by appointment. Additional photos, videos, and technical documentation are available upon request. Sold with a valid invoice.

Condition: used, functionality: fully functional, capacity of 3 buckets, each 800 kg Bwedexd H Itspfx Abtst

Year of construction: 2021, condition: like new (used), Memmert ICH 260 chamber, manufactured in 2021, in like-new condition. This unit was used for display purposes. One-year warranty on spare parts. Manufacturer’s description: Operating temperature range without humidity: 0 to +60 °C Temperature setting range 0 to +60 °C Operating temperature range +10 °C to +60 °C with humidity and/or light Temperature setting accuracy 0.1 °C Temperature sensor 2 Pt100 DIN Class A sensors in a 4-wire circuit for mutual monitoring, taking over the function in case of an error Bwsdpfjzam Hvsx Abtot Humidity Humidity humidity supply using distilled water from an external tank via a self-priming pump Humidification humidification using a hot steam generator Humidity active humidification and dehumidification of the air, adjustable in the range of 10-80% relative humidity with a digital display of relative humidity - display resolution 0.1%, setting accuracy 0.5%

Condition: ready for operation (used), Year of construction: 1975, A Bosch OBD 10/53L 12 and a Bosch OBD 15/54L 17 are available, strip width: 250mm, usable height: 260mm, number of furnace doors: 3, doors: inlet, intermediate and outlet door, strip speed: 1.8m/min, cycle time: 25min, cycle distance: 700mm, operating temperature of decarburizing zone: 760°C, operating temperature of bluing zone: 550°C, heating capacity of decarburizing zone: 84kW, heating capacity of bluing zone: 18kW, evaporator heating capacity: 3kW, evaporator water consumption: approx. 0.5l distilled water/h, energy consumption: approx. 45kWh/100kg net weight, total decarburizing time: 150min, cycle time: 25min, cycles in the decarburizing zone: 6, decarburizing zone temperature: 760°C, holding time: 30min, propane/air ratio for protective gas generation: 1:18, protective gas quantity: approx. 35Nm³/h, propane quantity: 2Nm³/h, air quantity: 36Nm³/h, combustion tower temperature: 1250°C, dew point or cooling water temperature of direct cooler: 23.5-25.5°C, total bluing time: 75min, cycles in the bluing zone: 3, bluing zone temperature: 550°C, holding time: 50min, evaporator temperature: 120°C, total connected load: 111kW, length: 14,200mm, width: 1650mm, height: 3000mm, with an Exogas Generator Gebrüder Hammer GmbH and documentation. An on-site inspection is possible. Bwodoztrbwepfx Abtst

Year of construction: 2021, condition: excellent (used), Memmert ICH 260L chamber from 2021. The unit comes with a one-year warranty on spare parts. Manufacturer's description: Temperature Operating temperature range without humidity: 0 to +60 °C Temperature setting range 0 to +60 °C Operating temperature range from +10 °C to +60 °C with humidity and/or light Temperature setting accuracy 0.1 °C Temperature sensor Bedozam Hiopfx Abtswt 2 Pt100 DIN Class A sensors in a 4-wire circuit for mutual monitoring, taking over functions in case of an error Humidity Humidity humidity supply using distilled water from an external tank via a self-priming pump Humidification humidification using a hot steam generator Humidity active humidification and dehumidification of the air, adjustable in the range of 10-80% relative humidity with a digital display of relative humidity - display resolution 0.1%, setting accuracy 0.5% Light Daylight and ultraviolet light can be programmed individually using the controller Light cold white light +/- 6%, for UV light +/- 10% Light lighting unit consisting of 4 cold white fluorescent lamps (standard D65 lighting, 6500 K) and 2 UV lamps in the spectral range of 320-400 nm

Condition: used, Year of construction: 2012, machine/vehicle number: SO141, Used MORETTO EPL 5-8 N blow molding machine - Year 2012Technical Specifications & Performance DataThis extrusion blow molding machine is engineered for producing hollow plastic containers with high repeatability and efficiency. Manufactured by Magic with a full-electric drive concept, it is equipped for industrial packaging and beverage production environments where precision, uptime, and energy efficiency are critical. It suits used bottling line upgrades and second hand equipment integrations requiring robust blow molding capabilities.Blow molding process: Extrusion blow molding, full electricMaximum blown container volume: 8000 cm³Clamping force: 100 kNSpeed: around 200 Unit/hour for ( Distilled water container ) Dry cycle time: 2.2 sOpening stroke: 250 mmMaximum mold dimensions (L × P × A): 425 / 2x130 / 400 mmGeneral electrical power: 15 kWTotal installed electrical power: 64 kWExtruder screw diameter: 70 mmExtruder L/D: 24 L/DExtruder motor power: 35 kWExtruder heating zones: 5Extruder heating power: 10.6 kWSingle extrusion head max die diameter: 100 mmHead heating zones: 4Head heating power: 3.8 kWMachine footprint (W × L × H): 1900 × 5050 × 3250 mmTotal system weight: 7000 kgNoise level: 75 dB(A)Advanced Automation & Control SystemsThe full-electric architecture enhances precision and repeatability while minimizing energy consumption and maintenance compared to hydraulic systems. Fast dry-cycle performance supports higher throughput and stable cycle times. Temperature control across multiple heating zones on the extruder and head ensures consistent parison quality and stable process control for demanding industrial packaging applications.Full-electric drive for efficient, clean operationMulti-zone temperature management on extruder and die headStable, repeatable dry cycle for consistent productionOperator-friendly adjustments and setup for mold changesProcess reliability suitable for stringent quality requirementsProduction Line Integration CapabilitiesThis machine integrates smoothly within a used bottling line or a mixed-manufacturer production environment. It comes with a comprehensive set of auxiliaries to streamline upstream and downstream handling, supporting end-to-end beverage production or industrial packaging workflows.Included auxiliaries: hopper feeders, suction unit, dryer, granulator, cooler, color mixer, conveyorsAuxiliaries brand: Moretto (most components purchased new in 2012)Inline or standalone operation for flexible layoutsSupports diverse container geometries enabled by robust clamping and mold size window... Bodpfx Ajzrgqkobtswt

Year of construction: 2011, condition: used, THERMATOOL CFI 250 Solid State HF Welder 250 kW High frequency tube welding machine This THERMATOOL CFI 250 is a Solid State High Frequency Welder designed for the production of steel tubes and profiles using high-frequency welding technology. With an output power of 250 kW and a 400 kHz welding frequency, it delivers reliable, efficient, and high-quality welding performance for tube mill production lines. Technical Specifications · Manufacturer: THERMATOOL · Model: CFI 250 Bedpfx Abezpx Iistewt · Year: 2011 · Output Power: 250 kW · Welding frequency: 400 kHz · Input Voltage: 3 × 400 V · Input Current: 578 A Main Features · 250 kW MosFet HF inverter with 5 pairs of modules (5 positive & 5 negative) · AUTOMATCH automatic load matching system · 250Kw DC rectifier with PLC control Siemens S7 · Remote control console · Closed-loop distilled water cooling system Looking for a used THERMATOOL HF welder, 250 kW solid-state welder, or other second-hand tube mill equipment? Explore our extensive range of quality used machinery for the steel tube industry. Input Voltage: 3 × 400 V Input Current: 578 A Welding frequency: 400 kHz Output Power: 250 kW 250Kw MosFet HF Inverter with 5 pairs of modules: 5 positive & 5 negative 250Kw DC rectifier: with PLC control Siemens S7

Condition: new, Year of construction: 2025, functionality: fully functional, tank capacity: 95 l, usable tank capacity: 80 l, total length: 1,000 mm, total width: 1,000 mm, total height: 2,400 mm, outer diameter: 1,000 mm, overall weight: 120 kg, wall material: stainless steel, wall structure: double-walled, type of input current: three-phase, warranty duration: 24 months, Equipment: CE marking, cooling unit, 95L Distilling Machine – Display Model – Copper Pot Still with Column, Spirits Distillery Equipment, Single-Pass Distillation Description 95L Column Distillery – Showroom Display Model (Year of Manufacture: 2025) (The unit was used for display purposes only and has never been used for distilling.) Key Information: • Distillation time: 2–2.5 hours (single run only) • Heating options: Electric and/or gas heating • Power: 9 kW or 12 kW (selectable) • Double-wall boiler with water bath and electric agitator motor • Two flow meters for precise process control • Dephlegmator thermometer • Mash thermometer • Alcohol collection vessel (spirit receiver) • 3 bubble plates with liquid level control • Back-flush system Bjdpfozlgn Aox Abtswt • Made exclusively from copper and stainless steel • Final product: approx. 85% ABV, highly aromatic and exceptionally pure This innovative distillery is a new, ex-display model manufactured in Hungary. Registration of the distillery with the customs authorities is the responsibility of the buyer. The distilling machine can be registered as a simple distillation unit. Includes warranty! Available for immediate delivery! If you have any questions, please feel free to contact me.

Year of construction: 2024, condition: like new (used), Memmert HPP 1060 eco chamber, manufactured in 2024. Ex-display unit with a one-year warranty on spare parts. Manufacturer’s description: Temperature setting range without light, with humidity: +5 to +70 °C Temperature setting range without light, without humidity: 0 to +70 °C Operating temperature range without light, with humidity: +5 (at least 20 °C below ambient temperature) to +70 °C Operating temperature range without light, without humidity: 0 (at least 20 °C below ambient temperature) to +70 °C Temperature setting accuracy 0.1 °C Temperature sensor 2 Pt100 DIN Class A sensors in a 4-wire circuit for mutual monitoring, taking over functions in case of an error Humidity Humidity setting range 10 - 90% relative humidity Humidity humidity supplied via distilled water from an external tank using a self-priming pump Humidification humidification using a hot steam generator Dehumidification dehumidification using a desiccant unit employing Peltier technology Humidity setting accuracy 0.5% relative humidity Bodpfezam E Sex Abtewt

Condition: ready for operation (used), functionality: fully functional, Ultrasonic Cleaner Paint Stripping Installation RAX-8 The solvent cleaning machine consists of 2 parts: 1) The ASD; a 4-tank ultrasonic cleaning and degreasing system 2) The distillation column (still); a closed boiling tank with a vapor zone above it, including condensation and cooling coils. The condensate is continuously returned to tank 1 via a water separation system, and the contaminated BEVO thinner from tank 3 is automatically pumped out. Tank contents: Tank 1: 40.5 liter immersion tank temperature: 76°C-79°C Bwodpfx Asw Ewl Usbtot Tank 2: 75 liter immersion tank temperature: 22°C-30°C Tank 3: 40.5 liter immersion tank (vapor tank) temperature: 77°C-82°C Tank 4 empty (evaporation/cooling) temperature: ambient temperature Distillation column max 60 liters temperature: 76°C-82°C The machine has been professionally connected by a certified electrician.

Condition: excellent (used), Desktop Metal 3D Printer Complete System Here, we offer a complete Desktop Metal 3D printer system. 3D metal printer studio system from Desktop Metal Complete system: 3D printer + debinding machine + sintering furnace Desktop Metal The three-part solution includes a 3D printer, debinder, and furnace. Manufacturer: Desktop Metal Model: Desktop Metal Studio System Operating condition: Used (Good) Year of manufacture: 2019 Desktop Metal Studio System includes: 1.1 Desktop Metal Studio 3D printer Bound Metal Deposition (BMD) technology Features: Printed materials: Metal Technology: FDM Application: Industrial Other features: Office X-axis travel: 30 cm (12 in) Y-axis travel: 20 cm (8 in) Z-axis travel: 20 cm (8 in) Description: Unlike laser-based systems that selectively melt metal powder, Bwedpozd Tllsfx Abtot the printer extrudes bound metal rods – similar to an FDM printer. This eliminates the safety requirements often associated with 3D metal printing, and enables new features such as the use of closed-cell infills for lightweight strength. 1.2 Desktop Metal Studio Debinder (Delamination machine) Fully automatic debinding Cleaning tank: 17.4 L (in process) / 22.5 L (storage) Description: The debinder prepares green parts by dissolving the primary binder for sintering. With a low-emission design, it requires no external ventilation and is safe for an office environment. Automatic liquid distillation and recycling mean that no refilling is required between cycles. 1.3 Desktop Metal Studio Sintering Furnace Hybrid technology (microwave & conventional heating elements) Build volume: 305x205x205mm Carbon housing Gas supply: 2 x 900 L gas cylinders Heating power: 20 kW Features: Function: Sintering Configuration: Chamber Heat source: Gas Other features: High temperature, automatic Maximum temperature: 1,400 °C (2,552 °F) Description: Fully automated and sized to fit through an office door, the furnace delivers industrial-grade sintering in an office-friendly package. Built-in temperature profiles tailored to each design and material ensure uniform heating and cooling without the residual stresses found in laser-based systems. Condition: used Scope of supply: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Year of construction: 2016, condition: used, THERMATOOL CFI 200 HF Welder for tube production, 200 kW solid-state high frequency welding system, manufactured in 2016. THERMATOOL CFI 200 HF Welder, designed for reliable high-frequency welding applications with advanced automatic load matching AUTOMATCH and THERMAVIEW remote control. With interconnecting cables, it is ready for re-installation. In excellent worling conditions. TECHNICAL SPECIFICATIONS - Manufacturer: THERMATOOL - Model: CFI 200 - Year: 2016 - Continuous Output Power: 5 - 200 kW - Nominal Welding Frequency: 400 kHz - Total System Power: 307 kVA - Input Voltage: 400 V - Input Frequency: 50 Hz - Input Current: 464 A - Control Voltage: 110 V SCOPE OF SUPPLY HF CABINET - Compact Rugged Enclosure Design - Water Cooled High Frequency Power Transistor Modules - High Frequency Capacitor Bank - Single Axis Table. - Water Flow and Temperature Protection - ‘Automatch’ - Automatic load matching system - Output Weld Lead Assembly DC CABINET Power Supply - SCR Power Controller/Stabiliser - Solid State Low Ripple Filter - Automatic Speed Power Control - Heavy Duty Power Transformer THERMAVIEW Remote Control Console - PC Panel with Thermaview software - Power Control - Pushbuttons and Control Switches - Analog Indication Meters OUTPUT BUSBAR - Straight output busbar CABLES / PIPING - Existing interconnecting cables - Existing distilled water interconnecting piping WORKCOILS - 5 workcoils in the range 25 – 76.2mm BENEFITS ✓ Solid-state technology for reliable operation Bwedpfxszi Twre Abtst ✓ Automatic load matching to optimize welding performance ✓ Integrated THERMAVIEW control for convenient operation and monitoring ✓ Suitable for a wide range of tube diameters with five included work coils ✓ Designed for efficient production and dependable welding performance For more information, contact Continuous Output Power: 5 - 200 kW Nominal Welding Frequency: 400 kHz Total System Power: 307 kVA Input Voltage: 400 V Input Frequency: 50 Hz Input Current: 464 A Control Voltage: 110 V