Used Autoclave for sale (121)

Condition: like new (used), functionality: fully functional, The static autoclave bases its sterilization system on the heat and cold transmission system by means of a water cascade. This autoclave is suitable for products that do not require movement during the sterilization process. The water, by means of a pump, is passed through a stainless steel plate exchanger for indirect heating. The heating and cooling of the water, which we use in all the cycles of the process, is carried out in the plate heat exchanger by means of steam or cold water. PRODUCTS: CANNED VEGETABLES, PASTA, PRE-COOKED FOODS, JUICES AND BEVERAGES, MEAT PRODUCTS, PATES, CANNED FRUIT, FISH. Gjdpfx Ajwn Hgtsabsuh Features: Diameter: 1380mm. Basket: 1X0.99X0.93m. Heat exchanger. Automated loading and unloading. Operation by waterfall system. Control panel. Valves.

Condition: used, Year of construction: 1992, Technical details: max. temperature: 120 °C internal diameter: 980 mm internal length : 2580 mm external diameter: 1500 mm external diameter : 2740 mm wall strength: ca. 6,5 mm content: ca. 2000 l weight: 1425 kg Guedou Nz I Tspfx Aabeh Autoclave tank It is possible that this autoclave were built for the process of steam sterilization (according to operating parameters) The operating overpressure of +2 bar per room probably refers to the execution of the steam sterilization process, not to the pressure resistance of the container. - Permissible operating temperature 120 °C *

Condition: used, functionality: fully functional, Autoclaves are used for the sterilization of packaged products that need to reach high temperatures (+100ºC) for the elimination or inactivation of pathogenic microorganisms. Gjdewndu Ispfx Aabeuh

Condition: used, functionality: fully functional, Autoclaves are used for the sterilization of packaged products that need to reach high temperatures (+100ºC) for the elimination or inactivation of pathogenic microorganisms. Static autoclaves: these are suitable for any format and are used for food packaged in cans, jars and other flexible materials. CHARACTERISTICS: * Forced ventilation *Shower system. * Temperature and time recorder. CONSUMPTIONS: - Steam: Maximum flow rate 2100 kg/h. Approximate consumption 475 kg/cycle. - Electrical energy in KW: 22kw Guodpowndpljfx Aabjh - Cold water in tn/hr: Flow rate 25m³/h. - Compressed air in m³/min. The theoretical required to cool the autoclave in the worst air requirement condition (empty or with low load) is 2.91 m³/minute. - Total amount of drainage in ton/day: Depends on the number of cycles. Approximately 0.8 m3/cycle will be drained from inside the autoclave at the end of the cycle. The water output of the exchanger will be the same as the water input during cooling, 25 m³/h. - Total raw water consumption in tn/day: 0.8 m³/cycle final + 12-16 m³ cooling.

Condition: used, functionality: fully functional, Autoclaves are used for the sterilization of packaged products that need to reach high temperatures (+100ºC) for the elimination or inactivation of pathogenic microorganisms. Rotary autoclaves: they are used to sterilize products that present greater difficulties in heat transmission. Examples are vegetables in grains, grated or diced, and beverages such as milkshakes, teas, coffees or evaporated milk. In this type, the basket rotates on itself inside the autoclave, stirring the contents and preventing the pieces closest to the sides of the pot from roasting. Steam consumption: - Steam consumption: 350 kg. - Required flow rate: 2400 kg/h Cold water consumption: - Cold water consumption: 8 m³. - Required flow rate: 36 m³/h. Compressed air consumption: - Consumption per cycle: 11 Nm³ - Required flow rate: 110 Nm³/h * Consumption may vary according to the cycle and temperature before and after sterilization. Guedpfxjwndcro Aaboh Fluid pressures: - Compressed air pressure 6 bar - Steam pressure 4/5 bar - Water pressure 3/5 bar

Condition: used, functionality: fully functional, Autoclaves are used for the sterilization of packaged products that need to reach high temperatures (+100ºC) for the elimination or inactivation of pathogenic microorganisms. Static autoclaves: these are suitable for any format and are used for food packaged in cans, jars and other flexible materials. Characteristics TUBULAR INTERCHANGER: Brand: Barriquand Steriflow Type: IJMS Temperature: 200ºC Design pressure: 7 Bar Test pressure: 11.9 Bar Surface area: 11.25 m² Features: Gsdpfx Aownc A Dsabouh - Start-up steam (6 Bar): 1,100 kg/h - Process steam (6 Bar): 325 kg/h - Electric consumption: 11 kw. - Water (4 Bar): 6,000 L Fluid pressures: - Compressed air pressure 6 bar - Steam pressure 4/5 bar - Water pressure 3/5 bar

Condition: excellent (used), Set of 2 autoclaves for wood impregnation. Gjdow S N Awspfx Aabjuh Internal diameter: 1950 mm Total length: 13,500 mm + 3 tanks for impregnant

Year of construction: 2018, condition: used, with mesh safety enclosure, welded mesh fence, 1 sliding door for loading, 14 storage positions made of steel frame (blue), mobile loading trolley, IPSEN loading and unloading system, year of manufacture: 2018, serial number: 30.5185-60, 2 hinged doors, IPSEN hardening furnace DL(M)-5-E, year of manufacture: 2018, serial number: 30.5185-50, min./max. working temperature: 150/450°C, connection values: 49 kVA/38 kW/400 V/50 Hz, IPSEN autoclave "Electromagnetic Field Emission Category 2 (EN12198)", Ø approx. 180x400 cm, type: RUHT-524 (FV)AvaC(N), year of manufacture: 2018, serial number: 30.5185-10, min./max. working temperature: 150/1,320°C, 1 cooling unit KKT cBoxX, no.: 909120-00575, year of manufacture: 2018, water softening unit, pressure vessel MASCHINEN- UND BEHÄLTERBAU MB170512-3.14300L, volume: 14,300 l, year of manufacture: 2018 Gjdpjxnahzjfx Aabsuh

Condition: used, Year of construction: 1990, functionality: fully functional, total height: 11,000 mm, total width: 4,000 mm, tank capacity: 1,66,500 l, TECHNICAL SPECIFICATIONS - Flat bottom tank - Brand: CSC - Material: stainless steel - Capacity: 166,500 litres Guodpfx Aasxnwnfsbsh - Interior finish: 2B - Exterior finish: Brushed ROOF - Lifting rings - 1 central chimney with 500 mm stainless steel hatch with clamping arm - 1 safety valve RING - 1 DN70 filling pipe with valve - 1 oval stainless steel autoclave door 310×420 mm - 1 DN70 stainless steel ball drain valve with sludge trap - 1 level gauge BOTTOM - Flat - 1 DN70 stainless steel butterfly drain valve - 1 DN50 stainless steel butterfly drain valve with decanter elbow - 6 fixing brackets for base plate DIMENSIONS - Diameter: 4000 mm - Height: 11000 mm

Condition: ready for operation (used), Plant Liquidation – Complete Equipment for Tire Retreading For sale is a comprehensive production line for tire retreading, ideally suited for businesses specializing in tire renewal. ⸻ Machinery & Equipment • Buffing/Rasping Machine: Tread and casing preparation (roughening and buffing) • Repair/Skiving Station: Grinding and patching • Extruder/Filling Unit: Cushion gum processing • Cementing/Adhesive Station • Building/Banding Station: For precured tread application • Envelope/Vacuum Station: Envelope and sealing operations • Autoclave including accessories (tire rings, vacuum pump, pipelines, carts) Additional Workstations: • Casing Spreader / Inspection stand • Pressure & Leak Test Station • Final Inspection (Tread and Sidewall Check) Plant & Auxiliary Equipment: • Compressors (Kaeser & Atlas Copco brands) • Extraction and dust removal system at grinding stations • Tire and material carts, shelving units • Tool and small parts set (valves, gaskets, clamps) • Transport and cooling racks • Various vulcanization and operating accessories Documentation: Photos, parts list, and additional documents available on request ⸻ Condition & Delivery • Used, fully operational • Inspection possible at any time • Accessories available • Dismantling, loading, and shipment easily arranged • Shipping via freight forwarder possible ⸻ Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices net, plus 19% VAT. Subject to change and errors excepted. Gusdpfx Asxk Tuaeabsh

Year of construction: 2016, condition: ready for operation (used), A complete soup production line including can filling, sealing, and washing processes is available. 1) Steam boiler Loos, year of manufacture: 1990, max. operating pressure: 6bar, steam generation: 1250kg/h. Including gas burner Weishaupt, year of manufacture: 1990, max. power: 1730kW, adjustable pressure range: 5mbar-140mbar. 2) Autoclave Lubeca. Including 20 cooking trolleys and various intermediate racks. 3) Can washing machine W. Busser 521-1, year of manufacture: 1984. Including conveyor belt. 4) Can filling and sealing machine. Including conveyor belt. 5) Inkjet printer Linx 8900, year of manufacture: 2019. 6) Basket washing machine Hobart FUX-SAF, year of manufacture: 1990. 7) 2x cooking kettles A.S.T.A. Steiner, max. operating overpressure vessel/double jacket: 0bar/1bar, max. operating temperature vessel/double jacket: 100°C/119°C, volume vessel/double jacket: 300L/20L. 8) Can labeling system. An on-site inspection is possible. This is a complete system with conveying technology and peripheral equipment. Individual or partial sale of the units is possible upon agreement. Guedexliurspfx Aaboh

Condition: used, This listing is for a Belimed PST 9-6-12 HS1 Steam Sterilizer. The unit is in excellent working condition and is ready for immediate release. The Belimed PST 9-6-12 HS1 is a top-of-the-line pharmaceutical autoclave designed for saturated steam sterilization of laboratory and production equipment, including heat- and moisture-stable porous and non-porous loads. This advanced stainless steel sterilizer supports the 6050 and 6065 sterilization processes with integrated Filter Integrity System (FIS), ensuring reliable sterilization and validation compliance in regulated environments. Engineered by Belimed Life Science and manufactured in Germany, this system delivers high process reliability, precise temperature control, and full compliance with GMP/cGMP standards, making it ideal for use in research, pilot, and GMP production settings. This HS1 configuration features a single-door chamber, water-jacket cooling, vacuum-assisted drying, and a user-friendly B-Touch interface with integrated process control. It is optimized for efficient sterilization cycles with minimal operator intervention. Key Features GMP-ready design supporting pharmaceutical-grade sterilization processes (6050/6065) Integrated Filter Integrity System (FIS) for monitoring and verifying sterilization filter integrity User-friendly B-Touch touchscreen interface with Siemens WinCC Unified or Rockwell FT Optix Water-jacket cooling and vacuum drying ensure rapid cooling and effective drying of chamber loads Single-door HS1 configuration optimized for ergonomic loading and unloading High-quality AISI 316L stainless steel construction with hygienic surface finishes (Ra < 0.8 µm) Automated operation with redundant sensors and independent measurement circuits for reliable sterilization Compliance with GAMP5, 21 CFR Part 11, Annex 11, and optional ASME BPE certification Supports modular accessories including trolleys, batch carts, perforated or wire-mesh shelves, and cleanroom integration Technical Specifications Manufacturer: Belimed Life Science (Germany) Model: PST 9-6-12 HS1 Sterilization Processes: 6050 / 6065 (Steam, Pre-Vacuum, Gravity) Filter Integrity System (FIS): Yes Chamber Dimensions (W × D × H): 1030 × 600 × 1380 mm Usable Chamber Volume: 710–850 L External Dimensions (H × W × D): 1940 × 2150 × 1710 mm Weight: Approximately 1,010 kg Chamber Material: AISI 316L Stainless Steel Surface Finish: Ra < 0.8 µm (≤ 0.6 µm optional) Door Type: Single-door HS1 Loading Type: Ground loader (GR) Cooling System: Water-jacket cooling Vacuum System: Integrated water-ring vacuum pump with optional water recovery Control System: B-Touch interface with PLC Electrical Supply: 400 V / 50 Hz (other voltages optional) Compliance: GMP / cGMP, 21 CFR Part 11, Annex 11, ASME BPE options Year of Manufacture: Available on request Serial Number: Available on request Applications Gusdpsxmi Hqofx Aabjh Sterilization of laboratory glassware, stainless steel equipment, and porous loads in biopharmaceutical production Small- to medium-scale pilot manufacturing with validated sterilization cycles GMP production environments requiring full regulatory compliance Sterilization of equipment used in vaccine, gene therapy, and biologics research Microbiology laboratories for culture media, instruments, and consumables Benefits Scalable and reliable for pilot and full production batches Validated sterilization with integrated FIS and redundant sensors ensures reproducible cycles High-...

Condition: good (used), Year of construction: 1964, functionality: fully functional, machine/vehicle number: 38897, total length: 9,000 mm, temperature: 50 °C, pressure: 14 bar, total width: 2,000 mm, operating pressure: 14 bar, We are offering for sale a 9-meter long wood impregnation autoclave with an internal diameter of 1.6 meters by the renowned manufacturer Maschinenbau Scholz at an extremely attractive price. Capacity: 189,020 liters. The autoclave is ideal for the simultaneous high-pressure chemical treatment of 6-8 m³ of timber up to 8-9 meters in length. This is an excellent machine for sawmills, wood product manufacturers (playgrounds, terraces, etc.), and wood processing companies for deep timber impregnation. Gsdpfxoxc Na No Aabouh The machine is available for viewing in Esztergom, 60 minutes by car from Budapest, in a Hungarian prefabricated house factory. The machine operates reliably. Reason for sale: high-pressure chemical treatment has ceased in the factory. ● The offer does not include dismantling, transport, or commissioning costs.

Year of construction: 2025, condition: used, comprising the following items: Placement unit (594), consisting of: 1 chain conveyor SEB-EURODRIVE, dimensions (W x H x D): approx. 350 x 145 x 60 cm; 1 rail conveyor device TEGEL-TECHNIK (595), carriage dimensions (W x H x D): approx. 130 x 160 x 130 cm, control system SIEMENS SIEMATIK HMI, rail length: approx. 25 m; 1 double hardening furnace PADELTTHERM KEU 1008/400-S (596), year of manufacture: 2023, connected load 4 and 3 phase 400V/50Hz, 60 kW, maximum temperature: approx. 400°C; 1 hardening furnace PADELTTHERM KEU 1008/400-S (597), year of manufacture: 2023, connected load 4 and 3 phase 400V/50Hz, 60 kW, maximum temperature: approx. 400°C; 1 autoclave ALD VACUUM Modultherm (598), year of manufacture: 2022, recorded operating hours: approx. 6,968, max. temperature: approx. 1,250°C, capacity: approx. 4,909 l / 338 l, 1 mobile autoclave unit on rail system, rail length approx. 25 m, ID: 39716; 1 pressure vessel, SABAWERK 47-001310, (599), capacity: approx. 5,000 l, max. allowable pressure: PS-1/40 bar, test pressure: approx. 58 bar, inspection date: 2023, maximum operating temperature approx. 50°C, min. operating temperature: approx. -10°C; 1 pressure vessel SABAWERK 47-001310, max. capacity: approx. 6,000 l, max. allowable pressure: PS-1/9 bar, test pressure: approx. 12.9 bar, inspection date: 2023, serial no.: 20550; 1 gas mixing unit FLUSYS (601), year of manufacture: 2022, comprising: 1 mixing battery FLUSYS type FSP-2030A_01, serial no.: M22111122A, year 2022, 1 compressed air drying unit ESD MK-HP575, year 2022, max. pressure: approx. 45 bar, max. capacity: approx. 575 m³/h; 1 compressed air compressor unit SAUER (602); 1 water treatment plant TECHNOTRANS (603); 1 pressure vessel KOMNINO KPT-10000-40/1.8 (604), year of manufacture: 2023, max. capacity: approx. 10,000 l, max. allowable pressure: approx. 57.2 bar, serial no.: 10054; 1 aluminium platform ladder, 10-steps, FARAONE 300/SN (605), max. load: approx. 150 kg, height: approx. 262 cm, net weight: approx. 35 kg, serial no.: 20230729002; 1 2-door steel cabinet (606), contents: various consumables for the multi-process hardening system. Gsdoxnak Aepfx Aabsuh

Condition: used, Year of construction: 1993, functionality: fully functional, tank capacity: 80,100 l, usable tank capacity: 80,100 l, total width: 4,000 mm, inner diameter: 4,000 mm, outer diameter: 4,000 mm, TECHNICAL SPECIFICATIONS - Flat-bottom tank - Material: stainless steel - Capacity: 80,100 litres - Exterior finish: brushed RING - 1 refill tube - 1 tasting tap - 1 oval autoclave door Gedpfsw Upzlex Aabouh - 1 support and level tap - 1 partial drain valve on square flange with stainless steel plug BOTTOM - Flat - Boitard with total drain valve on square flange with stainless steel cap DIMENSIONS - Diameter: 4000 mm APPENDICES - Liquid fertiliser storage: suitable and compatible - 6-month warranty - Complies with CE standards

Condition: used, Year of construction: 2006, functionality: fully functional, Lisec laminating line with Scholz autoclave and Kaeser compressor. The line is disassembled but fully functional. The photos show both the period when it was operational and the current situation with the disassembled components. Guedpsw Tyk Iofx Aabjh

Year of construction: 2002, condition: excellent (used), complete autoclav for impregnation of softwood. Length 18m. Including lories, no rails Guodpeiyw Rbsfx Aabsh

Year of construction: 2008, condition: used, The Getinge Autoclave is designed for the sterilization of porous or laboratory materials, which are capable of withstanding seam at high temperatures in excel of 100°. In stainless steel 1.4301 (AISI 304). FRONT SURFACE TEXTURE: Tetra polished Ra< 1,2 micrometer Guedpexd Aiyofx Aabeh THICKNESS: 1.0 mm

Year of construction: 2023, operating hours: 300 h, condition: like new (used), functionality: fully functional, Hygienic dosing pump for precise volumetric dosing of low to high-viscosity and particulate media. Product-contact surfaces Elastomers with FDA compliance certificate Product-contact parts are autoclavable Easy integration thanks to compact design Overall length approx. 2300 mm Nominal width approx. 350 mm Total width with motor approx. 500 mm Belt top edge adjustable from 980 to 1080 mm Base frame made of robust square tube profiles Version in stainless steel grade 1.4301 Double-sided knife edge, radius approx. 5 mm Food-grade conveyor belt, make: Habasit, color: white Central drive station Guodpfx Ajxcvzaoabsh Gear motor by SEW included Food-grade coating (depending on delivery time) Speed adjustable via frequency inverter (between 0.8 - 8 m/min) Incl. adjustment frame for 5 dispensers by Viscotec Adjustment is carried out using profiles and clamping units Height adjustment is manual via clamping units; all dispensers are adjusted simultaneously. Dispensers can be finely adjusted individually via slotted holes, as needed. Side adjustment, tilt, and adjustment in or against conveying direction can be set for each dispenser individually. No side guide included. Incl. engineering Incl. pre-assembly Incl. installation of dispensers at our facility Incl. test at our facility Surface finish: Conveyor in stainless steel 1.4301, round tube frame for dispensers in stainless steel 1.4301, clamping units made of aluminum. 5 bars are transferred from an existing conveyor system onto our conveyor belt. Control cabinet made of stainless steel 1.4301 Control and frequency inverter by Mitsubishi Electric Setup: Main switch, emergency stop switch, automatic on and off push buttons Display for adjusting the speed in m/min and setting delay time for start signal for the dispensers Sensors for bar detection (each bar is detected individually) Sensors and signal for dispenser start (each dispenser receives its own start signal) Communication interface with Viscotec Emergency stop currently only available for our own machine. Incl. control cabinet construction with 50% reserve capacity Incl. high-grade sensors (distance photoelectric sensors, capable of measuring and evaluating distance) Incl. high-grade control system (hardware and software can be expanded at any time without replacing the controller) Incl. HMI (display), approx. 7" Incl. E-plan Incl. program Incl. in-house test (interface test with Viscotec) Surface finish: control cabinet entirely of stainless steel, sensors made of stainless steel and FDA approved.

Condition: used, This listing is for the Avestin EmulsiFlex-C5 for homogenizer with sealed toolings and spares The unit is in full working condition and is ready for immediate use EmulsiFlex-C5 High Pressure Homogenizer The Avestin EmulsiFlex-C5 is a high-pressure, pneumatically powered homogenizer designed for laboratory-scale applications. It is ideal for processing small to medium sample volumes, from 7 mL up to 5 L/h, depending on the pressure applied. How It Works: High Pressure Homogenisation High pressure homogenisation is an efficient and easy-to-use technique for cell disruption and liposome/emulsion processing. The principle involves pumping the sample through a valve with a small aperture. The sample transitions from very high pressure (up to 30,000 psi) on the pump side to atmospheric pressure on the outlet side. This sudden drop in pressure creates intense shear forces, disrupting cell membranes or dramatically reducing liposome/emulsion sizes. For cells, the pressure-induced shear forces rupture the membranes, effectively lysing the cells. For liposomes and emulsions, this process reduces their size from micron to nanometer range, often resulting in uniform particles with narrow size distributions. Unique Features of the EmulsiFlex-C5 Dynamic Homogenising Valve The C5 uses a dynamic homogenising valve, which maintains constant pressure during sample processing. This consistency ensures the formation of highly uniform liposomes and micro-emulsions, with tight particle size distributions. Efficient Cell Disruption Most cells (including E. coli) can be lysed in a single pass, minimizing over-processing and reducing the risk of protein denaturation or degradation. Pressure Range: Adjustable from 500 to 30,000 psi Flow Rate: 1–5 L/h depending on pressure Minimum Sample Volume: 7 mL Holdback Volume: Less than 1 mL Temperature Control: Can be used with ice baths, external chillers, or in cold rooms Autoclavable: Easy cleaning and sterilization (SIP-compatible) Compact Size: 430 × 160 × 320 mm, 25 kg Power Source: Requires compressed or bottled air. For most applications (e.g., E. coli disruption or liposome formation), 100 psi air pressure is sufficient. Applications Disruption of bacterial, yeast, algal, insect, or mammalian cells Nano-sized liposome and emulsion formation Particle size reduction in pharmaceuticals, cosmetics, and food products Godpfx Asxhgawoabjuh Liposomal drug delivery systems Efficient homogenisation for biochemical and biophysical research

Condition: used, Year of construction: 1995, functionality: fully functional, inner diameter: 3,000 mm, TECHNICAL SPECIFICATIONS - Brand: LEJEUNE, year: 1995 - Material: 304L - Volume: 507 HL - Interior finish: 2B - Exterior finish: Brushed - Flat bottom with 2.5% slope. Roof - Central chimney - Ø 500 stainless steel hatch with clamping arm - Lifting rings Bottom - DN70 stainless steel butterfly valve - 4 fixing brackets for foundation slab Shell - 410 x 520 stainless steel door opening outwards Gusdpfx Aaswvuznjboh - Oval autoclave door and ladder support - DN70 stainless steel butterfly valve with sludge trap - Stainless steel taster - 1 level DIMENSIONS - Diameter: 3000 mm - Shell height: 7700 mm

Condition: used, This listing is for 1 of 2 Quattro Fluid SystemFlow 1000S These units is in full working condition and is ready for immediate use Overview & Application The Quattroflow 1000 S is a quaternary (four‑piston) diaphragm positive‑displacement pump—engineered for gentle, sterile handling of shear‑sensitive fluids such as proteins, vaccines, cell suspensions, and other biopharmaceutical or food-grade products. Its design features—like seal‑less operation, low shear, low pulsation, and dry‑run capability—make it ideal for critical applications including: Filtration systems: Tangential‑flow filtration (TFF), recirculation pumps, filter cartridges Chromatography: Gradient mixing and feed pumps Centrifuge feeding and homogenization Aseptic filling lines and other sensitive processing tasks Commonly processed media include albumin, IgG antibodies, enzymes, vaccines, cell and virus suspensions, dairy products, and cosmetic or polymeric solutions. Technical Specifications Here’s what’s known about its performance and build: Guodoxhfp Ropfx Aabsh Flow rate: Continuously variable between ~25 to 1000 L/h (at atmospheric pressure); around 750 L/h at 6 bar (depending on configuration) Max Pressure: Up to 6 bar, with high‑pressure variants available upon request Drive mechanism: Four‑piston diaphragm setup actuated by an eccentric shaft; standard variant uses a 5° eccentric shaft reaching up to 1,800 rpm Material & Construction: Pump head: Stainless steel grades 1.4435 or 1.4539, optional alternatives (like PEEK) available Membranes: Santoprene (diaphragm), EPDM (valve membranes) Priming and Pumping Features: Self‑priming, dry‑run capable Four directional porting—pump orientation flexible No shaft seals or wetted rotating parts, minimizing wear and product heating Internal volume (filling volume): Approx 35 mL; designed to minimize dead volume and aid product recovery Connections: Standard ¾″ TC (Tri‑Clamp) sanitary ferrule; other flange types available Dimensions & Weight: Pump: 523 × 155 × 212 mm, ~23 kg Control unit (frequency inverter): 350 × 155 × 212 mm, ~6 kg Electrical: 230 V AC (50 Hz) via a control box with 6.3 A fuse; motor IP54, control box IP53 Key Advantages This model offers several standout benefits: Gentle, high‑integrity fluid handling—ideal for fragile biologics due to low shear and pulsation Contamination-free design—no mechanical seals, minimal abrasion Robust operation—powerful 370 W motor, simplified maintenance with fewer parts Aseptic and sterile process readiness—autoclavable, self‑draining, hygienic construction Installation adaptability—four flow directions, small footprint, flexible hookups

Condition: used, This listing is for 1 of 2 Applikon BioPilot 70L Fermenter. The unit is in full working condition and is ready for immediate use Overview The Applikon BioPilot 70L is a fully integrated, pilot-scale fermentation system designed for microbial and cell culture applications in research, development, and small-scale production. Manufactured by Applikon Biotechnology, a global innovator in advanced bioreactor systems, the BioPilot 70L offers exceptional flexibility, process control, and scalability—bridging the gap between laboratory and production environments. Key Features Advanced Bioprocess Technology Precision Control: Integrated control of key parameters such as pH, dissolved oxygen (DO), temperature, agitation, and feed rates. Scalable Design: Built to mimic laboratory-scale conditions, enabling seamless scale-up to production volumes. Modular Automation: Compatible with Applikon ez-Control, DeltaV, or Lucullus® PIMS for sophisticated process control and data management. High-Quality Construction 70L Total Volume (50L Working Volume): Ideal for pilot studies, process optimization, and small-batch production. 316L Stainless Steel Vessel: Electro-polished and cGMP-compliant for pharmaceutical and biotechnological use. Jacketed Design: Enables precise temperature control via thermal fluid circulation. Technical Specifications Model: BioPilot 70L Total Volume: 70 liters Working Volume: 50 liters (typical) Vessel Material: 316L stainless steel, electro-polished Control Options: ez-Control, DeltaV, Lucullus® Sterilization: In-situ sterilizable (SIP) and Clean-in-Place (CIP) compatible Ports: Multiple ports for probes, additions, sampling, gas inlets/outlets Applications Gjdjxhfngopfx Aabjuh Biopharmaceuticals: Production of recombinant proteins, enzymes, vaccines Industrial Biotechnology: Fermentation of bio-based chemicals and specialty metabolites Food & Beverage: Cultivation of probiotics and functional ingredients Academic & R&D: Process development, scale-up studies, and microbial strain screening System Components 70L stainless steel fermentation vessel (jacketed) Modular control tower or integrated skid system Peristaltic pumps for acid/base, antifoam, and nutrient feed Autoclavable or SIP-compatible sensors for pH, DO, temperature, and level Gas flow control via mass flow controllers (MFCs) or rotameters Harvest and sampling ports, exhaust condenser, and sterile connections Quality Assurance Applikon fermentation systems are engineered and manufactured under strict quality control standards, ensuring full cGMP and FDA compliance where required. Factory Acceptance Testing (FAT), documentation, and validation support are provided for regulated environments. Benefits Flexible Configuration: Customizable to meet process-specific requirements Reliable Scale-Up: Accurate replication of lab-scale conditions in pilot volumes High-Level Automation: Advanced monitoring and control systems for optimized yields Ease of Integration: Compatible with existing bioprocess infrastructure Compliance-Ready: Suited for regulated production and research environments Conclusion The Applikon BioPilot 70L Fermentation System is the perfect solution for companies and institutions needing a reliable, scalable, and compliant bioreactor platform. With precise control, robust construction, and full integration capability, it empowers bioprocess development from the lab bench to commercial readiness.

Condition: used, This listing is for the Unity Scientific Spectra Star 2600XT bench‑top near‑infrared (NIR) analyzer The unit is in full working condition and is ready for immediate use The SpectraStar 2600XT‑is a high-performance, bench‑top near‑infrared (NIR) analyzer developed by Unity Scientific, designed for rapid, versatile compositional analysis across a wide variety of sample types, including solids, slurries, and liquids. Overview & Key Features Design & Functionality Dual Convection Technology: Offers adjustable fan speed from 0 % (natural convection) to 100 %, enabling tailored air circulation depending on the sample type or protocol Temperature Range: Operates from 5 °C above ambient up to 105 °C, making it suitable even for drying tasks Temperature Uniformity & Stability: With fan off: ±0.6 °C spatial uniformity With fan at full speed: ±0.2 °C to ±0.4 °C uniformity (at 37 °C) Temporal stability: ±0.1 °C (at 37 °C) Capacity & Build Interior Volume: 178 L (about 6.3 cubic feet) Shelving: Comes with 2 stainless-steel shelves (each supporting up to ~25 kg) and can accommodate up to 19 shelves for flexible arrangement Construction: Corrosion-resistant stainless steel interior (AISI 304) with easy-to-clean rounded corners Controls & Usability Controller: Microprocessor-based with a clear vacuum fluorescent display for easy setting of temperature, timers, and monitoring Timer Functionality: Programmable daily, weekly, or real-time ON/OFF cycles for scheduling experiments Extras: Internal power socket (120 V models) for operating devices like shakers or stirrers inside the chamber Internal glass viewing door and optional internal lighting for observing samples without opening the chamber RS‑232 interface for data logging and connectivity Stackable design without tools—efficient laboratory space use Safety & Maintenance Alarms: Automatic over- and under-temperature alert system protects sample integrity Security Model (IMH180‑S): Adds a lockable outer door and audible alarms for door‑open conditions Includes a certified 140 °C decontamination cycle (about six hours) to sterilize the chamber without needing an autoclave—ideal for high‑sterility environments Dimensions & Electrical Specs Feature Specification Exterior (W × D × H) 64 × 74 × 92 cm (25.2 × 29.1 × 36.2 in) Interior (W × D × H) ~46 × 54 × 70 cm (18.3 × 21.4 × 27.9 in) Weight ~70 kg (154 lb) Electrical (120 V) 1,020–1,390 W; 8.5 A at 60 Hz Materials Stainless steel (interior), durable housing Summary The Thermo Scientific Heratherm IMH180 is a high-performance, reliable incubator tailored for demanding laboratory tasks: Precision: Excellent temperature control and uniformity. Flexibility: Adjustable airflow, generous interior volume, and timer options. Convenience: Viewing window, internal socket, and connectivity via RS‑232. Cleanability & Space Efficiency: Stainless steel interior and stackable design. Godpfx Ajxhd I Sjabsuh Advanced Safety (Security Model): Door alarms, lockable access, and high-temperature decontamination. Perfect for microbiology, cell culture, pharmaceutical testing, and drying applications where sample integrity and process control are critical.

Condition: used, This listing is for the Thermo Scientific Heratherm IMH180 Incubator The unit is in full working condition and is ready for immediate use The Thermo Scientific Heratherm IMH180 is a high-performance, reliable incubator tailored for demanding laboratory tasks: Precision: Excellent temperature control and uniformity. Flexibility: Adjustable airflow, generous interior volume, and timer options. Convenience: Viewing window, internal socket, and connectivity via RS‑232. Cleanability & Space Efficiency: Stainless steel interior and stackable design. Advanced Safety (Security Model): Door alarms, lockable access, and high-temperature decontamination. Perfect for microbiology, cell culture, pharmaceutical testing, and drying applications where sample integrity and process control are critical. Design & Functionality Dual Convection Technology: Offers adjustable fan speed from 0 % (natural convection) to 100 %, enabling tailored air circulation depending on the sample type or protocol Temperature Range: Operates from 5 °C above ambient up to 105 °C, making it suitable even for drying tasks Temperature Uniformity & Stability: With fan off: ±0.6 °C spatial uniformity With fan at full speed: ±0.2 °C to ±0.4 °C uniformity (at 37 °C) Temporal stability: ±0.1 °C (at 37 °C) Capacity & Build Interior Volume: 178 L (about 6.3 cubic feet) Shelving: Comes with 2 stainless-steel shelves (each supporting up to ~25 kg) and can accommodate up to 19 shelves for flexible arrangement Construction: Corrosion-resistant stainless steel interior (AISI 304) with easy-to-clean rounded corn Controls & Usability Controller: Microprocessor-based with a clear vacuum fluorescent display for easy setting of temperature, timers, and monitoring Timer Functionality: Programmable daily, weekly, or real-time ON/OFF cycles for scheduling experiments Extras: Internal power socket (120 V models) for operating devices like shakers or stirrers inside the chamber Gjdpfx Ajxhd Ixsabjuh Internal glass viewing door and optional internal lighting for observing samples without opening the chamber RS‑232 interface for data logging and connectivity Stackable design without tools—efficient laboratory space use Safety & Maintenance Alarms: Automatic over- and under-temperature alert system protects sample integrity Security Model (IMH180‑S): Adds a lockable outer door and audible alarms for door‑open conditions Includes a certified 140 °C decontamination cycle (about six hours) to sterilize the chamber without needing an autoclave—ideal for high‑sterility environments Dimensions & Electrical Specs Feature Specification Exterior (W × D × H) 64 × 74 × 92 cm (25.2 × 29.1 × 36.2 in) Interior (W × D × H) ~46 × 54 × 70 cm (18.3 × 21.4 × 27.9 in) Weight ~70 kg (154 lb) Electrical (120 V) 1,020–1,390 W; 8.5 A at 60 Hz Materials Stainless steel (interior), durable housin