Used Automatic Grinding Machine for sale (76,739)

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS GRINDING AREA Bdsdpo Adutzjfx Andoi Grinding wheel diameter: 170 mm Table dimensions: 400 × 170 mm MACHINE DETAILS MANUFACTURER Brand: Münzenmaier Machine type: Steel grinding machine DIMENSIONS AND WEIGHT Length: 800 mm Width: 600 mm Height: 1,500 mm Weight: 150 kg

Condition: ready for operation (used), Year of construction: 1984, machine/vehicle number: No.317, No.327, functionality: limited functionality, operating hours: 40,000 h, grinding height: 130 mm, grinding length: 250 mm, grinding spindle speed: 3,300 rpm, grinding width: 100 mm, table length: 400 mm, table width: 225 mm, Equipment: rotational speed infinitely variable, For sale are 2 (two) sets of optical profile grinding machines Wasino type GLS-130AS, with Fanuc control, made in Japan in 1984. 1 machine is working condition, there are videos of spindle runout and positioning X,Y accuracy measurements. Second machine serial No.327 is the same complete condition, just factory worker could not start it up for us, was worked more then 1 year ago. There are accessories, tools and technical documentation for each machine. For 1 machine Wasino complete with accesories and tools, price is 18500 euro EXW stock. Bedpswh Udtsfx Andedi Preferable to sell as package 2 machines together.

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS CONTROL Control system: SIDAC system control MAGNETIC CHUCK Magnet dimensions: 1,000 x 500 mm GRINDING WHEEL Grinding wheel diameter: approx. 350 mm MACHINE DETAILS GENERAL Machine type: Surface grinding machine Manufacturer: Minini Model: JMF 1100CN Year of manufacture: 1992 Bdodpfx Ao Adu Swondji Machine number: 1,000 DIMENSIONS AND WEIGHT Length: 5,000 mm Width: 2,400 mm Height: 2,700 mm Weight: 5,000 kg EQUIPMENT Diaform dressing device Important note: the clamping device shown on the magnetic chuck is not included in the sale and delivery!

Condition: used, Year of construction: 1954, functionality: fully functional, grinding length 600 mm grinding width 205 mm Bjdpfxevu Hkys Andsdi x-travel 600 mm ja

Condition: good (used), Year of construction: 1973, Ref. -No.: 10233 Manufacturer: DISKUS Type: DDS 300 R Year of construction: 1973 Type of control: Konventionell Control: N/a Storage location: Halberstadt Country of origin: Deutschland Serial no.: 6984 Weight Of The Machine Ca.: 3 t Further information: Bdodpfxe Ahmuho Andei Discuss - surface grinding machine

Condition: good (used), Year of construction: 2004, functionality: fully functional, grinding length: 400 mm, grinding width: 210 mm, automatic infeed electro magnet plate dressing device coolant device Technische Daten / technical details: Bdsdpfx Ajz Entkjndsi max. Schleiflänge / max. grinding length 400 mm max. Schleifbreite / max. grinding width 210 mm X-Achse, Tischlängshub / X-axis table longitudinal travel 420 mm Z-Achse, Querweg / Z-axis cross travel 190 mm Schleifscheibenabmessungen / grinding wheel dimensions 225x25x51 mm Anschlussleistung / drive capacity 7 kW Gewicht ca. / weight ca. 1200 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, Universal external and internal cylindrical grinding machine ERWIN JUNKER, Type BUAJ 29 NC External cylindrical grinding machine, internal cylindrical grinding machine Manufacturer's No. 3126, Year of manufacture 2001 Center distance max. 800 mm Workpiece grinding length max. 800 mm Center height 150 mm Swivel diameter max. 295 mm Workpiece weight max. 120 kg Workpiece spindle speed 20 - 750 rpm Spindle stock, internal taper MK 5 Spindle stock, short taper flange DIN 55027, Size 5, Ø 82 mm Spindle stock, spindle bore 36 mm Spindle stock adjustment 355 mm Tailstock, internal taper MK 4 Grinding wheel diameter max. 400 mm Grinding wheel width max. 63 mm Grinding wheel bore Ø 127 mm Grinding wheel peripheral speed 45 m/sec Automatic spindle stock feed 0.001 Manual feed 0.001 mm Bsdpfx Ao Aard Nsndedi Hydraulic table movement 0-7.5 m/min Motor power, grinding spindle 7.5 kW Motor power, workpiece spindle stock 1.1 kW Motor power, internal grinding unit 1.75 kW Mains connection 400 Volt, 50 Hz - FANUC control, Type Power Mate-Model D - Grinding spindle stock swivels from +45° to -15° - Workpiece spindle stock swivels 90° - Table can be tilted for taper grinding up to 8°30" - Support/pinole for the workpiece spindle stock with internal taper MK 4 - Internal grinding unit for swiveling in - Internal grinding spindle with collet chuck, Ø 6 mm - Coolant system located beside the machine - Machine equipped with one grinding wheel, Ø 400 x 50 mm - 1 three-jaw chuck TOS, Ø 160 mm - 1 mechanical round magnetic chuck, Ø 200 mm - Collet chuck system with various collets - Various attachments for the internal grinding unit - 1 diamond grinding wheel dresser - Other accessories as shown in the pictures - Operating manual, hydraulic diagram, electrical diagram Space requirement for cylindrical grinding machine with band filter L x W x H 3200 x 2500 x 1900 mm Weight 5000 kg In very good condition

Condition: good (used), Year of construction: 1994, For sale OERLIKON MATTISON R.P. 5 Vertical Surface Grinding Machine with Magnetic Circular Table – Ø 1100 mm – 45 kW Description: For sale, a vertical surface grinding machine with a vertical spindle and rotary table, manufactured by OERLIKON MATTISON, model R.P. 5. This is a very powerful and robust machine, ideal for quickly grinding large series, as well as for grinding flat surfaces, discs, blades, large rings, or large mechanical parts. Technical specifications: Brand: OERLIKON MATTISON Model: R.P. 5 Diameter of the magnetic circular table: ~1,100 mm (measured with a meter) Bdedjzpzynspfx Andoi Spindle power / main motor power: 44 / 45 kW (60 HP) Motor speed: 750 rpm Motor: SELIN Genova (380 V / 50 Hz / 87 A) Included equipment: Large, recessed electromagnetic circular table Separate electrical cabinet (380 V) Paper filter system / coolant separator with belt conveyor Segment grinding wheel head Control panel on the front

Condition: good (used), functionality: fully functional, Internal article number: 26101 Universal tool grinding machine Deckel S11 Clamping surface of the tool slide: 500 x 180 mm Max. tool diameter between centers: 130 mm Max. tool diameter with free clamping in the universal dividing head: 620 mm Max. tool length between centers: 270 mm Grinding stroke: 190 mm Grinding stroke during helical grinding: 190 mm Transverse adjustment of the tool slide: 100 mm Vertical adjustment of the grinding head: 325 mm Longitudinal adjustment of the grinding spindle: 5 mm Coarse adjustment travel: Tool holder: 220 mm Grinding head holder: 800 mm Universal dividing head on tool slide: 330 mm Bods Ahhiuepfx Andjdi Three-phase drive motor: 1.1 kW at 2800 rpm Spindle speeds, stepless: 2000 to 12000 rpm Max. cutoff wheel diameter: 200 mm The machine is fully functional and can be inspected under power by arrangement in our heated warehouse of over 500 m².

Condition: good (used), CMC Ariemat ARM 75 Automatic Cardboard Creasing Machine The machine is fully operational and ready for production. Like new. This highly efficient creasing system is ideal for the production of binders, hard covers, and more. Made in Italy. Sheet feeding is manual, while the machine handles the rest automatically. An automatic feeder can also be added (optional). Parameters are set from the control panel and jobs can be saved to the machine’s memory. Bdsdpfx As Af E D Hsndji Materials processed range from 200 GSM to 4 mm cardboard. Sturdy construction, weighs 750 kg. Adjustable creasing and counter-creasing widths. Stepper motor control. Fast operation, up to 2400 sheets/hour. Sheet size: 750 x 1400 mm. Two sheet guides with an extended table and pressure rollers. Quick machine format conversion in less than 1 minute. Receiving table included.

Condition: excellent (used), Year of construction: 2008, Table size 600 x 300 mm Max. grinding area 600 x 300 mm Dimensions of the grinding wheel 406 x 50 x 127 mm Min. / max. distance table / spindle center 500 mm Table speed, hydraulically adjustable 5 - 25 m/min. Cross feed 0.1 – 20 mm Cross travel 900 mm/min. Handwheel, cross 1 revolution 5 mm 1 division mark 0.02 mm Automatic vertical feed 0.001 - 0.999 mm/cycle Handwheel, vertical 1 revolution 2 mm 1 division mark 0.01 mm With AD 5 (automatic feed) 0.005 mm Grinding motor speeds 1450 / 2900 rpm Grinding motor 1.5 / 3.7 kW Hydraulic pump motor 0.75 kW Drive motor, cross 1.1 kW Drive motor, vertical 1.1 kW Machine dimensions L x W x H approx. 2300 x 1800 x 2100 mm Weight 1700 kg Accessories / Special features: • 2-axis digital display • Automatic vertical feed with spark-out and subsequent retraction • Electro-magnetic clamping table L x W 600 x 300 mm • Manual grinding wheel dressing device • Grinding wheel speed, 2 stages • 1 grinding wheel with flange • Control panel • Lighting • Coolant system with band filter and magnetic separator • Machine feet • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 11-153 Bedpfx Ansizka Iododi DE - 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 2022, Plus freight 4,000.00 € and installation and commissioning 5,000.00 € Grinding system B Sand 5 with partial lathe Working principle The panel is placed on the infeed table. It goes into the partial lathe and centered. It is ground in the grinding system, through and back. The panel is turned in the partial lathe. It is ground on the other side in the grinding system. Then there are two options: either the panel goes onto the outfeed table and unloaded or it comes back onto the infeed table and is unloaded there (the second option extends the working time). Grinding system equipment 1 upper grinding lamella roller suitable for surfaces. Power 3 kW; D 420 mm; L 1300 mm. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. 3 upper sanding discs for perfectly trimming the longitudinal and transverse wood fibers. Power 1.5 kW each; D 400 mm. Disc brush for beveling edges. The unit functions as a deep brush. After detecting the panel edges, it will follow the door edges. Power 0.75 kW; D 250 mm. Machine features: -The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate sanding of the panels. -All tools are controlled by frequency converters. -All brushes are equipped with quick-release sanding strips without replacing the hub. -The discs are equipped with air bladders to optimize cleaning and service life. -Sanding discs are equipped with a Velcro fastening system. -The feed and rotation speed are PLC-controlled to prevent edge breakage. -High-quality sanding on 4 sides thanks to the system's constant removal rate. -Automatic and rapid unit changeover. - Constant throughput height, PLC and industrial software enable interlinking in a surface line. - Continuously variable speed of the discs, brushes and feed thanks to the fully equipped frequency converter. - Right/left rotation of the discs and brushes with different abrasive grits. - Individually driven feed of the discs, rollers and belts. - Additional adjustment of the brushes and discs to balance the use of the abrasive and to allow for changing the grinding pressure on the surfaces. - Strong support bed made of tubular steel guarantees the best rigidity, stability and flatness. - Planed upper support bed to ensure the best parallelism of the working surface for the grinding discs. - All unit carriages are designed with linear recirculating ball bearing guides, thus high load capacity and high precision. - Motorized feed belt controlled by a frequency converter, 0.55 kW. Machine doors equipped with safety devices. - Machine doors equipped with windows to observe the workpieces during operation. - Under the units, there are 80 mm rubber-coated pressure rollers to hold the workpieces in place during processing. · Low follow-up costs thanks to individual blade replacement. · Low running noise thanks to the enclosed system housing. · All units have suction housings with their respective suction supports. Cover plate with suction nozzle. · Completely encapsulated machine housing for a clean environment. Bdsdsvvkipspfx Andji

Condition: good (used), grinding length: 400 mm, grinding width: 150 mm, Table length 400 mm Table width 150 mm Grinding length 400 mm Grinding width 150 mm Design: hydraulic Max. distance from table to spindle center line 350 mm Table speeds: continuously variable from 0.00 m/min up to 0.0 m/min Automatic vertical feed: from 0.000 mm up to 0.013 mm Diameter of grinding wheel 00 mm Width of the grinding wheel 16 mm Grinding wheel speeds: from 800 rpm Voltage 50 Hz 3x 380 Volt Grinding spindle motor 0.30 HP Machine weight approximately 900 kg Overall dimensions of the machine: Length 1300 mm Width 1000 mm Bsdpfevga Sujx Andedi Height 1500 mm

Condition: good (used), Surface grinding machine Manufacturer: Harig Stock number: 2965-4 Year of manufacture: Machine number: Type: Super 612 Grinding length: 300 mm Grinding width: 175 mm Table clamping surface: 300 x 150 mm Magnet: 250 x 120 mm Bdjdpfoz Hzyyex Andoi Vertical adjustment: 250 mm Table movement, longitudinal: 330 mm, manual Table movement, transverse: 175 mm, manual Spindle speed: 3,600 rpm Grinding wheels: 200 x 20 x 51 mm Connection: kW Accessories/Equipment: Condition: good Weight: t Dimensions: 870 x 900 x 1,900 mm

Condition: good (used), For sale is our ferrite air-gap grinding machine. Bodpfe Af I Iiox Andedi The machine is fully functional (power cord is missing) and in good condition. Includes a comprehensive range of accessories. The sale includes a large number of grinding tools and holders for virtually any application. We would be happy to answer any further questions about the machine.

Condition: used, Technical details: grinding length: 300 mm centre height: 175 mm swing diameter: 315 mm table clamping surface LxW: 1.800 x 200 mm control: Heidenhain Bdsdpfxezaunzs Andei Longitudinal adjustment of grinding unit on table max.: 1100 mm work piece spindle speed: 3steps/1500-2200 U/min feed continuous: 0,001-1 mm Max. travel x-axis: 300 weight of the machine ca.: 3,1 t dimension machine approx.LxWxH: 2,9 x 1,6 x 1,4 mm Swivel for right and left machining Automatic table reversal Tailstock: MK3 holder Operation: Manual control unit/foot switch Coolant: System with feed Heidenhain measuring device *

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Data Bdodo Aduq Tepfx Andsi Manufacturer: Rema Type: TP80 Machine Type: Tube grinding machine Electrical Data Operating Voltage: 400 V Connected Load: 2.5 kW Rated Current: 6 A Grinding Data Grinding Diameter: approx. 80 mm MACHINE DETAILS Dimensions Length: 830 mm Width: 700 mm Height: 1,500 mm Weight Machine Weight: 200 kg

Condition: used, Year of construction: 1987, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Machine Type: Universal surface grinder Year of Construction: 1987 Machine Weight: approx. 1.5 t Working Area Grinding Length: 520 mm Bdjdo Acg D Nopfx Andji Grinding Width: 160 mm Workpiece Height: 300 mm Clamping System Electromagnetic clamping table: 520 × 160 mm Grinding Wheel Wheel Diameter: 230 mm Dimensions Length: approx. 1.5 m Width: approx. 1.8 m Height: approx. 1.6 m EQUIPMENT Rapid traverse in the Z-axis Hydraulic table drive External control cabinet Oil cooling for improved dimensional accuracy Coolant system

Condition: good (used), Year of construction: 2004, Ref. -No.: 10629 Manufacturer: MICHAEL DECKEL Type: S20 Turbo Year of construction: 2004 Type of control: CNC-Steuerung Storage location: Halberstadt Bjdpe Ahkxyofx Andodi Country of origin: Germany Workpiece Diameter: 250 mm Max. Grinding length: 340 mm Max. Workpiece Weight: 50 kg Grinding wheel diameter (max.): 150 mm Turning Speeds: 8000 RPM Workpiece holder: SK 50 Further information: The machine can be viewed while powered up.

Condition: used, Year of construction: 2001, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: HZPUI-T2300, feed length X-axis: 10,000 mm, feed length Y-axis: 20,000 mm, feed length Z-axis: 30,000 mm, ram adjustment: 10,000 mm, installation height: 54,000 mm, total width: 80,000 mm, total length: 90,000 mm, drop-through hole in table: 32,000 mm, input voltage: 380 V, overall weight: 5,400 kg, DGUV certified until: 08/2026, control voltage: 380 V, product height (max.): 5,000 mm, year of last overhaul: 2025, sheet thickness steel (max.): 2,000 mm, input frequency: 50 Hz, sheet thickness aluminum (max.): 3,000 mm, Equipment: 4th hydraulic function, SchulerUsed German Schuler hydraulic press, model HZPUI-T-2300/1700, manufactured in 2001. Nominal force 23000kN (2300 ton), bolster size 4600×2500 mm, total weight 540 ton, power 1600kW, HLP46 hydraulic oil. Heavy duty for automotive panel, deep drawing. Bodpj Afapkefx Andedi

Condition: used, Year of construction: 1989, Technical details: rotary table diameter: 630 mm grinding height: 350 mm grinding head - power requirement: 11 kW grinding length: 600 mm Bedpfx Ansz E Hu Hjdjdi max. dia. of grinding wheel: 450 mm grinding spindle speed: 764 -1.485 steples U/min automatic feeds: 0,002 - 0,1 mm table speed: 8 - 128 steples U/min rotary table revolutions per minute : 8 - 128 stepless U/min rotary table: 630 +3° /-5° mm total power requirement: 18,5 kW weight of the machine ca.: 5,5 t dimension machine approx.LxWxH: 2,6 x 2,3 x 2,5 m The rotary table is tiltable. Heavy-duty industrial surface grinding machine from the German manufacturer REFORM, equipped with a horizontal grinding spindle and a large rotary table. The machine is suitable for precision surface grinding of rotationally symmetrical as well as large-area workpieces. The continuously rotating table ensures uniform machining of the workpiece surface. The machine is equipped with a large magnetic rotary chuck, a heavy-duty grinding spindle unit, automatic infeed and grinding movements, as well as a coolant system with filtration unit. Its robust and heavy machine construction is designed for continuous industrial operation and for applications requiring high standards of flatness and surface finish. Particularly suitable for grinding flat workpieces. *

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 04006, For sale is a stretch wrapping machine with a conveyor belt and scale. The machine was in the shipping department. Several programs can be started directly on the machine or via a cable switch (operated from the forklift). Process: The package is placed on the roller table of the machine by a forklift. The machine starts at the push of a button, is wrapped automatically, the film is separated, the package moves along a roller conveyor to the unloading station, and is weighed. The package is unloaded from the unloading station by a forklift. Bjdpfx Aewl Hp Nendodi All information is provided without guarantee. Sale to commercial customers only. Viewing by appointment in 94424 Arnstorf (Germany). Pickup in 94424 Arnstorf (Germany).

Condition: good (used), Hydraulic cylindrical grinding machine Bjdjr E Azijpfx Andedi Center height 100 mm Center width 500 mm Grinding wheel diameter min./max. 200 - 300 mm 3 grinding wheel revolutions 2,250 - 2,420 - 2,680 rpm Workpiece spindle head: 8 workpiece speeds, adjustable 30 - 750 rpm. Spindle taper or inner taper of the workpiece spindle MK 4 Tailstock: Inner taper of quill MK 3 Quill travel 30 mm Table: Maximum table inclination +/- 6° Table speed, adjustable 0.1 - 6.0 m / min. Motor power 3 kW Dimensions L x W x H 1650 x 1350 x 1400 mm Weight 1900 kg Accessories / Special features: - Manual or automatic operation - Automatic infeed - Grinding wheel flange with grinding wheel - Wet grinding device Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel

Condition: good (used), Year of construction: 1984, Ref. -No.: 10545 Bdedpfx Ano Ahmu Nsdji Manufacturer: OKAMOTO Type: PSG 63 UAN Year of construction: 1984 Type of control: CNC-Steuerung Control: CNC Storage location: Halberstadt Country of origin: Japan Cross movement of the grinding wheel head: 340 mm Workpiece spindle speed range: 1500 RPM Max. Grinding length: 600 mm Peripheral speed: 1800 m / s Grinding Width: 320 mm Max. Table longitudinal movement: 750 mm Grinding Wheel Hole Diameter: 127 mm Dimensions Of The Machine Ca.: 2,63 x 1,88 x 1,85 m Grinding Wheel Width: 40 mm Grinding wheel dimensions: 355 x 38 mm Machine weight: 2200 kg Grinding wheel diameter (max.): 350 mm Max. distance table-spindle center: 500 mm Table Length: 605 mm Table Width: 300 mm T-Slots: 3 x 17 mm Further information: The machine can be viewed under power by arrangement.

Condition: used, machine/vehicle number: 208 597, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Manufacturer: Hauser Machine Type: Coordinate Grinding Machine Type: 3SMO Machine Weight: approx. 2 t Working Area Bsdpfo Aaz Evox Andsdi X-axis travel: 400 mm Y-axis travel: 250 mm Workpiece height: 500 mm Grinding wheel diameter: 220 mm Overhang: 310 mm Angle range: 12° Vertical grinding slide adjustment: 110 mm Workpiece weight: max. 80 kg Work Table Table area: 600 × 320 mm Grinding Spindle Grinding spindle speed: max. 50,000 rpm Peripheral speed: max. 35 m/s Feed Rate Feed rate: 0–6 m/min Dimensions Space requirement: approx. 1.2 × 1.3 × 2.3 m EQUIPMENT Heidenhain 2-axis digital display Electrical control Work light Chip guard