Used Automatic Turret Lathe for sale (24,227)

Condition: good (used), functionality: fully functional, Technical specifications: Clamping plate diameter: 1250 mm Max. workpiece diameter: 1400 mm Cjdpfxsy Udilo An Ujrc Max. workpiece height: 1070 mm Max. workpiece weight: 6000 kg Crossrail stroke: 710 mm Working stroke of the slide: 720 mm Working travel of the crossrail support from the center of the clamping plate, left/right: 60/915 mm Two units available for purchase.

Condition: good (used), Year of construction: 2005, functionality: fully functional, Maier ML 26 long-turn lathe, Fanuc control system, Year of manufacture 2005, Bar passage diameter 26 mm, Fire extinguishing system, High-pressure pump, Credpjzavctsfx An Usc Counter spindle, FMB magazine loader, 6 powered tool holders, Accessories.

Condition: good (used), Year of construction: 2004, functionality: fully functional, Maier ML 16 long turning lathe, year of manufacture 2004, Fanuc control system Bar passage diameter Ø 16mm High-pressure pump, Fire extinguishing system, Cedpfxozavb Aj An Uorc Counter spindle, FMB magazine loader, some driven tool holders, accessories.

Condition: good (used), Year of construction: 2003, CNC turning center TRAUB TNK 36 Year of manufacture: 2003 Control: TX8i (64 bit) Flat screen monitor, 10.4 inches Additional V24 RS232 interface in the control cabinet MDE interface in the control cabinet (machine is running, piece counter) Tool monitoring for thread cutting without compensation chuck Main spindle: Spindle bore 36 mm, maximum speed 6,300 rpm Drive power AC 6.7 / 10.7 kW C-axis Quick-change parts Hainbuch, mounting aid, base body Quick-change device Hainbuch, manual Counter spindle: Counter spindle as a motor spindle with C-axis Device for counter pressure, workpiece ejection device, Axfix chuck Hainbuch Tool holder, top, driven tools, electronic gearbox X3 cross axis for front tool holder, front tool holder, 5-position, driven tools Cut-off station, driven tools Workpiece removal device: Workpiece gripper Gripper jaws D5-8, D8-20, D20-36 Codpfx Ajzaud Asn Uerc Coolant system: Tank 230 l / 7 bar / 50 l/min. Internal coolant supply 30 bar High pressure 120 bar at the front and rear machining stations, vacuum rotary filter Knoll VRF 150/750 (suitable for aluminum, plastic, brass, and steel) Coolant gun Hinged belt chip conveyor, discharge height 950 mm Preparation for installation of bar feeder magazine (guide tube D25, D36) Workpiece stop, rotating (shank 16x16) Collision monitoring Brankamp CMS 100 on main and counter spindle Machine without known defects.

Condition: used, faceplate diameter 1200 mm swing diameter 1400 mm turning height 1250 mm cross rail - adjustment 600 mm work spindle adjustment 750 mm total power requirement 69 kW Crsdpfx Ajyq Sy Nen Uec weight of the machine ca. 25 t reconditioned Without controls The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: reconditioned (used), Year of construction: 2019, functionality: fully functional, CNC Swiss-Type Automatic Lathe GILDEMEISTER SPRINT 20/8 With Fanuc 32i Control Year of manufacture: 11/2019 Spindle bore: 20 mm MAIN SPINDLE Turning diameter: max. 20 mm Speed range: max. 10,000 rpm Travel Z1: 60 mm SUB SPINDLE Turning diameter: max. 20 mm Travel X2: 220 mm Travel Z2: 170 mm Speed: max. 10,000 rpm SLIDE 1 Travel X1: 50 mm Travel Y1: 325 mm Crjdpfxjy Rngas An Uoc SLIDE Y2 Travel Y2: 85 mm With the following accessories: Full safety enclosure with interior lighting Various tool holders Tool holder for slides 1-3 4 driven tools with 4 spindles, ESX/ER 16 fitting C-axis for main and sub spindle Y-axis on slides 1-2 2 cross slides Workpiece unloading conveyor 4-color signal light beacon Fire extinguishing system Coolant system 165 l (Pumping capacity 90 l/min 1 bar) THE MACHINE IS IN AS-NEW CONDITION!! THE MACHINE HAS ONLY 110 PROGRAM RUNNING HOURS!!

Condition: reconditioned (used), Year of construction: 2016, functionality: fully functional, CNC Sliding Headstock Automatic Lathe GILDEMEISTER SPRINT 20/8 linear Equipped with Fanuc 31i control Year of manufacture: 2016 Spindle bore: 20 mm MAIN SPINDLE Turning diameter: max. 20 mm Speed range: max. 10,000 rpm Z1 stroke: 80 mm SUB SPINDLE Turning diameter: max. 20 mm Z2 stroke: 300 mm Speed: max. 10,000 rpm SLIDE 1 X1 stroke: 50 mm Y1 stroke: 350 mm 6-position tool holder 12 x 12 mm 5 driven tools, including spindles with ESX 16 collet holders SLIDE 2 X2 stroke: 240 mm 4-position tool holder for external machining, 12 x 12 mm 4-position tool holder for internal machining, up to 20 mm diameter 5 driven tools, including spindles with ESX 16 collet holders 6 + 2 axes, 2 Y-axes as standard Linear drive for maximum precision Including the following accessories: Fully enclosed safety cabin with interior lighting Various tool holders Csdpfxjy Rm Snj An Usrc C axis for main and sub spindle Bar feeder LNS Quick Load Servo 80 S2 Workpiece unloading conveyor Hinged belt chip conveyor 4-color signal tower Fire extinguishing system Coolant system 250 liters (Pump capacity: 120 l/min, 1.5 bar) THE MACHINE IS IN EXCELLENT CONDITION!! THE MACHINE HAS ONLY 4,426 PROGRAM RUNNING HOURS!!

Condition: used, Year of construction: 1998, number of spindles 6 spindle passage 27 mm turning length 59 mm hexagon material 24 mm square material 18 mm cross slide travel 36 mm longitudinal slide travel 85 mm spindle turning speed range 366 - 5020 U/min max. torque 95 Nm control INDEX total power requirement 20 kW - 6 cross slides Crodovh Naqspfx An Usc - 6 longitudinal slides - polygon device - thread cutting device - hydr. tapping device - workpiece removal belt - bar loading magazine PIETRO CUCCHI, model AN-BN Accessories: various tool holders, various collets, chip conveyor, coolant

Condition: good (used), Year of construction: 2009, functionality: fully functional, CNC Sliding Head Lathe Manufacturer: Traub Machine Model: TNL 12 Control: Traub Year of manufacture: 2009 TECHNICAL DATA Headstock - Max. bar diameter (mm): 12.7 - Bar stock tolerance (DIN 671) (mm): Ø Xh9 - Max. spindle speed (rpm): 12,000 Max. turning length / headstock stroke - With fixed guide bush (mm): 130 - With rotating guide bush (mm): 80 - With programmable guide bush (mm): 80 C-axis resolution (degrees): 0.001 Rapid traverse Z1 (m/min): 30 Tool carrier 1 - X1 axis travel (mm): 35 - Y1 axis travel (mm): 38 (-10 +28) - Rapid traverse X1/Y1 (m/min): 15 - Chip-to-chip time (s): 0.3 Tool carrier 2 - X2 axis travel (mm): 35 - Z2 axis travel (mm): 50 - Rapid traverse X2/Z2 (m/min): 15 - Chip-to-chip time (s): 0.3 Tool drive for tool carriers 1 and 2 - Max. speed (rpm): 8,000 - Max. number of driven tools: 2xG - Clamping diameter for drilling tools (mm): 0.5–7 Sub-spindle / Front attachment - Max. bar diameter (mm): 12.7 - Max. longitudinal stroke 23, 24 / Xg (mm): 140 / 228 - Rapid traverse 23,24/X3 (m/min): 30 - Tool positions (number): 4 - Max. speed (rpm): 12,000 - C-axis resolution (deg): 0.001 Rear attachment, driven / fixed - Z travel, driven with work spindle (mm): 80 - Tool holder diameter (mm): 20 - Tool positions (number): 3 Rear attachment (X4 axis) - X4 travel (mm): 39 - Rapid traverse speed (m/min): 15 - Tool holder diameter (mm): 28 - Tool positions (number): 4 Tool drive for rear attachment (with X4 axis) - Max. speed (rpm): 10,000 - Max. number of driven tools: 4 - Clamping diameter for drilling tools: - Driven (mm): 0.5–7 - Non-driven (mm): 0.5–10 Coolant system - Single-stage pump pressure (bar): 3 - Tank capacity (l): 180 - Delivery rate (l/min): 40 EQUIPMENT FEATURES - Chip conveyor - FMB Minimag 18 bar feeder Cedoy N A S Uepfx An Usrc - High-pressure system - Fire suppression system Subject to changes and errors in technical data and specifications.

Condition: good (used), Year of construction: 2007, functionality: fully functional, CNC Swiss-type Lathe Manufacturer: Traub Machine Model: TNL 12 Control: Traub Year of Manufacture: 2007 TECHNICAL DATA Spindle Head - Max. bar diameter (mm): 12.7 - Material quality (DIN 671) (mm): Ø Xh9 - Max. spindle speed (rpm): 12,000 Max. machining length / spindle stroke - With fixed guide bushing (mm): 130 - With rotating guide bushing (mm): 80 - With programmable guide bushing (mm): 80 C-axis resolution (degrees): 0.001 Rapid traverse Z1 (m/min): 30 Turret 1 - X1 axis travel (mm): 35 - Y1 axis travel (mm): 38 (-10 +28) - Rapid traverse X1 / Y1 (m/min): 15 - Chip-to-chip time (s): 0.3 Turret 2 - X2 axis travel (mm): 35 - Z2 axis travel (mm): 50 - Rapid traverse X2/Z2 (m/min): 15 - Chip-to-chip time (s): 0.3 Tool Drive for Turret 1 and 2 - Max. speed (rpm): 8,000 - Max. tools (number): 2xG - Clamping diameter for drilling tools (mm): 0.5-7 Sub-Spindle / Front Attachment - Max. bar diameter (mm): 12.7 - Max. longitudinal stroke 23, 24 / Xg (mm): 140 | 228 - Rapid traverse 23,24/X3 (m/min): 30 - Tool stations (number): 4 - Max. speed (rpm): 12,000 - C-axis resolution (degrees): 0.001 Backworking Attachment (dragged / fixed) - Z stroke, dragged with work spindle (mm): 80 - Holder diameter for tools (mm): 20 - Tool stations (number): 3 Backworking Attachment (X4 axis) - X4 travel (mm): 39 - Rapid traverse speed (m/min): 15 - Holder diameter for tools (mm): 28 - Tool stations (number): 4 Cedpfx Aoy N A Aton Ujrc Tool Drive for Backworking Attachment (with X4 axis) - Max. speed (rpm): 10,000 - Driven tools max. (number): 4 - Clamping diameter for drilling tools - driven (mm): 0.5 - 7 - non-driven (mm): 0.5 - 10 Coolant System - Single-stage pump pressure (bar): 3 - Tank capacity (l): 180 - Pump delivery rate (l/min): 40 EQUIPMENT FEATURES - Chip conveyor - FMB Minimag 18 bar feeder - High-pressure coolant system - Fire extinguishing system Subject to changes and errors in technical data and specifications.

Condition: not inspected (used), Year of construction: 1999, rand: MORI SEIKI Type: ZL150SMC Year of build: 1998 Turning Ø: 440 mm Spindle boring Ø: 45 mm Speed till n=: 5000 rpm Number of tool changer stations: 24 Chip conveyor: true CNC control, brand, type: MSC501 Manual present: true Machine weight: 7000 kg Terms of delivery: Loaded on truck Codpjzagrfofx An Usrc

Condition: used, Technical details: Crsdpfx Aevb Dq Ron Usc faceplate diameter: 4000 mm swing diameter: 4300 mm turning height: 330 mm faceplate turning speed range: 1 - 92 U/min workpiece weight: 18 t feeds: 1 - 4000 mm/min main drive motor: 55 kW total power requirement: 85 kVA weight of the machine ca.: 64 t dimensions of the machine ca.: 90, x 7,2 x 5,5 m with CNC SIEMENS 840 D for 4 axis 2 Vertical Supports tool Basic holder chip conveyor *

Condition: used, Technical details: faceplate diameter: 5000 mm swing diameter: 6100 mm Codpsw Rz U Ajfx An Ujrc turning height: 2400 mm ram stroke each side: 1490 mm ram head dimension: 340 x 340 mm max. workpiece weight: 100.000 kg total power requirement: 100 kW weight of the machine ca.: 155 t faceplate turning speed range: 0,4 - 50 U/min with 2 axes CNC SIEMENS 840 D *

Condition: used, Year of construction: 2005, CNC Mitsubishi Mieldas 635 LC Max. machining diameter Ø 32 mm (from Ø 10 mm) Max. machining length 320 mm for the chuck Max. front drilling diameter Ø 12 mm Max. front tapping diameter M 10, tap M 8 (die) Through-hole diameter of the spindle Ø36 mm Main spindle speed from 200 to 8,000 min¯¹ Main spindle speed change Continuous S + 4-digit numerical value Main spindle indexing 1° Main spindle C-axis 0.001° Max. diameter of the chuck Ø 32 mm of the rear spindle Max. workpiece length for pick-up 145 mm from the rear spindle Max. workpiece overhang length 25 mm of the rear spindle Max. drilling diameter in the Ø 10 mm rear machining process Max. tapping diameter in the M8 rear machining process Rear spindle speed from 200 to 7,000 min¯¹ Rear spindle speed change Continuous S + 4-digit numerical value Rear spindle indexing 1° Counter-spindle C-axis 0.001° Tool holder spindle Max. tapping diameter Ø 7 mm Spindle speed M 6 Spindle speed change from 200 to 5,000 min¯¹ Continuous S + 4-digit numerical value Opposite tool holder Max. drilling diameter Ø 7 mm Max. tapping diameter M 6 Spindle speed from 200 to 4,500 min¯¹ Spindle speed change Continuous S + 4-digit numerical value Guide sleeve and chuck models Main spindle chuck MC081-M Guide sleeve FG531-M Rego type ER16/AR16 chuck Rear spindle chuck FC081-M-K Number of tools to be mounted Up to 18 tools + α Tool dimensions Tool (multiple tool holder) 16 x 169 x 130 mm Sleeve (opposite tool holder) Ø 25.4 mm Maximum diameter of the tool mounted in the rotating tool holder of the tool holder Drill and front milling cutter Ø 10 mm Rapid feed rate 20 m/min Minimum increment of movement X1 axis 0.001 mm Y1 axis 0.001 mm Z1 axis 0.001 mm X2 axis 0.001 mm Z2 axis 0.001 mm Z3 axis 0.001 mm Axis travel X1 axis 108 mm Y1 axis 275 mm Z1 axis 325 mm X2 axis 228 mm Z2 axis 130 mm Cjdpfx Asy Uvy Ajn Ujrc Z3 axis 410 mm Bar length 2,500 mm Center height 1,132 mm IEMCA BOSS 332-E BAR FEEDER INCLUDED Machine complete with manuals and CE declaration of conformity. All technical data shown are indicative and may be subject to change without notice, and therefore should not be considered binding.

Condition: used, Year of construction: 2022, turning diameter over bed 254 mm spindle passage 20 mm turning length 120 mm Control TX8i-s Cedpfx Ansy Nfdte Uerc total power requirement 40 kW weight of the machine ca. 5 t

Condition: used, Year of construction: 2007, Technical details: faceplate diameter: 1600 mm Csdjx Aq E Hjpfx An Uerc power requirement: 80 kW weight of the machine ca.: 25 t dimensions of the machine ca.: 4,4 x 4,62 m max. workpiece diameter: 2000 mm max. diameter of face turning: 1800 mm tool taper: ISO50 The machine has been regularly serviced and is in good technical condition. With C-Axis *

Condition: used, Year of construction: 1998, Package of 3 Schütte S32PC Article: CNC-controlled multi-spindle automatic lathe Manufacturer: Schutte Type: S32PC Yob: 1998 One machine is operational; the other two can be used for spare parts Includes IEMCA PRA40/33/P loading magazine, built in 1997 (rack type loader) Includes IEMCA PRA40/42/F loading magazine, built in 1999 (bundle loader) Includes IEMCA SIR325 loading magazine (integral loader with bundle magazine) tooling included in delivery may differ from the pictures Please, contact us for getting more information and pictures on mail(at) or Crjdjy Nk I Dopfx An Uec *

Condition: excellent (used), turning diameter over bed 260 mm spindle passage 28 mm turning length 300 mm Codjy Ivdzopfx An Uorc centre height 130 mm turning speeds 125 - 2800 U/min total power requirement 3 kW weight of the machine ca. 0,8 t dimensions of the machine ca. 1,4 x 0,6 x 1,4 m

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Year of manufacture 2018 Cedpfx Anjy I Dq Ae Uorc Control: Fanuc TCM Further data to follow...

Condition: used, Year of construction: 2006, spindle speed (max.): 5,000 rpm, total width: 45,000 mm, total length: 19,900 mm, total height: 23,000 mm, travel distance X-axis: 165 mm, travel distance Y-axis: 80 mm, bar length: 600 mm, CNC Lathe (with 2nd spindle, 3 turrets and Y-axis) Spindle bore diameter 65 mm Spindle speed 5.000 R/min Cjdpfx Aoy Nyrxen Uorc Spindle motor 25/20 kW Spindle speed counter spindle 5.000 R/min X-axis movement 165 / 165 / 165 Y-axis movement 80 mm Z-axis movement 220 / 150 / 650 mm W-axis movement (subspindle to mainspindle) 690 mm C-axis indexing 0,0001° Number of turret 3 Number of tools on turret 12 (3x 12) Tool taper VDI 30 Bar feeder LNS Quick Load Servo 65 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2006, spindle speed (max.): 5,000 rpm, total width: 45,000 mm, total length: 19,900 mm, total height: 23,000 mm, travel distance X-axis: 165 mm, travel distance Y-axis: 80 mm, bar length: 600 mm, CNC Lathe (with 2nd spindle, 3 turrets and Y-axis) Spindle bore diameter 65 mm Spindle speed 5.000 R/min Spindle motor 25/20 kW Spindle speed counter spindle 5.000 R/min Crodpfsy Nyg Asx An Uoc X-axis movement 165 / 165 / 165 Y-axis movement 80 mm Z-axis movement 220 / 150 / 650 mm W-axis movement (subspindle to mainspindle) 690 mm C-axis indexing 0,0001° Number of turret 3 Number of tools on turret 12 (3x 12) Tool taper VDI 30 Bar feeder LNS Quick Load Servo 65 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: ready for operation (used), Offered is a cam-controlled automatic lathe. Bar capacity: 29mm, speed range: max. 3750rpm, main drive: incrementally adjustable via change gears, number of tool slides: 4, control: cam control. Equipped with bar loading magazine, coolant device, tool turret, various tool holders, change gear set. Note: Sale is without extraction system. Weight: approx. 2200kg incl. magazine, overall dimensions X/Y/Z: approx. 5500mm/1300mm/1750mm. Inspection possible by arrangement. Csdpoy Tx N Refx An Ujrc

Condition: excellent (used), Year of construction: 2006, TECHNICAL DATA Axis data Crsdewvap Repfx An Ujc Rapid traverse rates: X, Y, Z, ZB, XB: 35,000 mm/min C: 198,000 °/min (550 min⁻¹) Maximum feed rates: X, Y, Z, ZB, XB: 10,000 mm/min C: 10,000 °/min (27.8 min⁻¹) Minimum input increment: X, Y, XB: 0.001 mm / 0.0001 inch (diameter) Z, ZB: 0.001 mm / 0.0001 inch C: 0.001° Machining capacities Maximum machining diameter: Ø16 mm (5/8 in) Maximum headstock stroke: fixed guide bushing: 205 mm (8 in) rotating guide bushing: 155 mm (6–3/32 in) rotating magic guide bushing: 155 mm (6–3/32 in) Maximum drilling capacity with driven tool: Ø6 mm (15/64 in), Ø4 mm (5/32 in) Maximum tapping capacity with driven tool: M5×P0.8, M3×P0.5 Maximum milling capacity: Ø10 mm (25/64 in), Ø7 mm (9/32 in) Maximum thread cutting capacity: M8×P1.25 Machine configuration Operating mode: right-hand machining station Design: integrated mechanical/electrical setup Dimensions (L×W×H): 1861 × 1060 × 1750 mm Spindle height: 1060 mm Weight: approx. 1700 kg Main spindle Spindle speed: max. 10,000 min⁻¹ Speed control: S-command + direct 5-digit command Main spindle drive: 2.2 kW (continuous), 3.7 kW (15 min/60% duty cycle) Indexing: 15°, 1° Tool combinations Various combinations with 1–3 spindles for tool diameters Ø12 mm, Ø10 mm, or Ø6 mm Tool holders for ER11 or ER16 Drill mounting Number of tools: 4 Max. speed: 5000 min⁻¹ (ER16), 7500 min⁻¹ (ER11) Drive motor: 0.4 kW Tool selection: servo motor Backworking unit Max. chuck diameter: Ø16 mm (5/8 in) Max. part length: 80 mm Max. outer spindle travel: 30 mm Max. part ejection length: 50 mm Spindle speed: max. 8000 min⁻¹ Spindle drive: 100 W, AC servomotor Tools: 4-spindle unit Max. drilling capacity: Ø8 mm (5/16 in) Max. tapping capacity: M6 × P1.0 SCOPE OF SUPPLY Includes (non-exhaustive list): STAR SB-16D CNC Swiss-type lathe Fire extinguishing system Coolant tank LNS Tryton-112 bar feeder High-pressure pump Machine accessories Bar feeder accessories Complete operating documentation Exact scope of supply as per photo documentation.

Condition: good (used), TECHNICAL DATA AXLE Rapid feed X,Y: 15000 mm/min Rapid feed A,B: 15000 mm/min Rapid feed Z1,Z2,E: 18000 mm/min Rapid feed C: 90000°/min Smallest input unit: 0.001 mm Codpeu Uic Tsfx An Usrc Smallest input unit, C-axis: 0.001° MACHINING PERFORMANCE Max. turning diameter: 20 mm Max. Headstock stroke: 205 mm Max. Drilling capacity: Stationary: 14 mm; Driven: 8 mm Max. Tapping capacity: Stationary: M10 x P1.5; Driven: M6 X P1.0 MAIN SPINDLE Spindle speed: 500 - 10000 rpm Drive: Spindle drive Main spindle motor: 3.7 / 5.5 kW Main spindle bore: 26 mm WHEELING SPINDLE Max. Clamping diameter: 20 mm Max. Part length for ejection to the front: 150 mm Max. Clamping length: 75 mm Spindle speed: 500 - 10000 rpm Pick-up spindle motor: 2.2 / 3.7 kW Indexing angle: 1°, 15° CONFIGURATION Operation mode: Right-handed Dimensions: 2700 x 1400 x 2400 mm Weight: 3400 kg SCOPE OF OFFER U.A: (list not exhaustive) Control system: Fanuc Fire extinguishing system: Siemens Oil mist separator: Donaldson Transformer Hydraulic unit Parts conveyor Chip conveyor Bar feeder: LNS Tool holder Exact scope of supply according to photo gallery We assume no liability for the correctness, completeness and up-to-dateness of the information.

Condition: good (used), STAR SV-32 CNC sliding headstock automatic lathe TECHNICAL DATA Main spindle, bar capacity: 32 mm Travel: 310 mm Spindle speed: 7000 rpm Spindle drive power: 7.5 kW Minimum resolution, C-axis: 0.01 ° Counter spindle, bar capacity: 32 mm Spindle speed: 7000 rpm Spindle drive power: 7.5 kW Resolution, C-axis: 0.01 ° Turret: Number of tools: 10 of which driven: 10 Speed of the driven tools: 5`700 rpm Driven tools, power: 2.8 kW Tool carrier: Number of tools: 4 Of which driven: 3 Speed of the driven tools: 6'000 rpm Weight and dimensions: Codpfxeu Uicye An Uerc Weight: 3800 kg Dimensions: 2700 x 1400 x 2400 mm SCOPE OF OFFER U.A: (list not exhaustive) Control system: Fanuc Fire extinguishing system: Siemens Oil mist separator: Donaldson transformer High pressure pump Parts conveyor Chip conveyor Exact scope of supply according to photo gallery We assume no liability for the correctness, completeness and up-to-dateness of the information.