Used Ball for sale (3,140)

Condition: used, Year of construction: 2011, turning length 1500 mm control SINUMERIK 828D centre height 270 mm greates pass round over bed 540 mm swing diameter over slide rest 310 mm bed width 350 mm max. workpiece weight 1500 kg spindle bore 85 mm turning speeds 27 - 2250 U/min main drive DC 11 kW MACHINE EQUIPMENT: - AME chip conveyor - Lynette - Heavy grey cast iron bed for optimum damping and reduced tool wear Pgodsxyaf Rjpfx Amfsr - Inductively hardened and parallel synchronised bed guides - Counter guides completely Turcite-coated and hand-scraped - Hardened and ground ball screws - Thermosymmetrical headstock - Main drive 11 kW - Infinitely variable speed range 27-2250 rpm with 3-stage gearbox

Condition: good (used), Year of construction: 2002, measuring range X-axis 330 mm measuring range Z-axis 400 mm 1 tool presetting machine Make: KELCH, Model: Kalimat C34, Year of manufacture: 2002 Measuring range X/Z 330 x 400 mm Easy-Wrap Set measuring software 2 VDI / HSK adaptors, machine table --> Measuring axes Two precision guides per axis in a recirculating ball bearing system with maximum load capacity; each guide features two ball-recirculating shoes per guideway to prevent yawing and pitching of the measuring slides. --> Heidenhain LS optoelectronic measuring systems, centrally positioned on both measuring axes for position determination at the centre of the measuring slides. --> Tool holders Hardened SK 50 tool spindle with a taper of gauge quality, mounted in precision roller bearings for maximum concentricity and repeatability. --> Tool spindle rotation pneumatically clamped at the touch of a button, positioning in 4 x 90° increments for vertical tools via pneumatic indexing pins. Pedpew N S Epefx Amfogr --> Cutting edge scanning High-quality profile projector with a 150 mm screen diameter and 20x magnification for non-contact measurement and reliable reading of the cutting edge position in the projector. --> Rotatable and fixed crosshairs for checking the radius and angle of the tool cutting edge. - in working order - no repairs required Includes measuring computer, label printer, monitor and keyboard Translated with (free version)

Condition: ready for operation (used), Transroll spindle L = 875 mm from Studer S60 adjustment range: 570 mm, Ø 63 mm, pitch: 5 mm, Ø ball cage: 90 mm, Ø mounting flange: 125 mm, Ø pin: 30/40 mm, Ø pin thread: 40 mm, used, normal signs of wear, 100% functional Pgedpfjzu Hi Sex Amfor

Condition: new, SKF 7026 ACD/P4ADGA Precision angular contact ball bearing Bore 130 mm Outer diameter 200 mm Width 34 mm < unused > in OVP 100 % functional Pgodpfx Aezu E Rbjmfer

Condition: new, SKF S71928 ACD / DBAVQ6485 Angular contact ball bearing set (set = 1 pair), unused in original packaging, 100% functional, scope of delivery as per photos Pjdpfxozu E Rue Amfjgr

Condition: new, SLF angular contact ball bearing, unused in original packaging, 100% functional, scope of delivery as per photos Pgjdpfx Amjzu E R Uofor

Condition: new, Warner Electric ball screw drive total length: 2280 mm, thread length: 2000 mm, thread diameter: 50 mm, pitch: 10 mm, paragraph 1: length: 180 mm, diameter 30/26 mm, paragraph 2: length: 115 mm, diameter 40/37.5 mm, hexagon: SW 32 mm, bolt circle: 95 mm, nut diameter: 75 mm, flange diameter: 110 mm, unused, 100% functional, scope of delivery as per photos. ATTENTION: Please enquire for charges for packing and transport separately! Pgjdpfxozu Ht Ds Amfjr

Condition: used, Year of construction: 2012, - Machining area: 5300x1400 mm - Main spindle replaced 3 years ago - 18-position tool changer Technical data Machining area - In the X direction: 5300 mm - In the Y direction with main spindle + WZ-0: 20 mm: 1400 mm - In the Y direction with drilling unit: (all vertical drills) 890 mm - Single-position machining: X = 2 x 2550 mm - Free space in the center: X = 200 mm - Alternating field machining: X = 2 x 2250 mm - Free space in the center: 800 mm 1 automatic tool/adapter changer magazine - Arrangement: mounted on the support, moving in the X direction - Disc changer with 18 magazine positions Guidance system - All axes are equipped with pre-tensioned, surface-hardened precision roller guides. Central lubrication - Manual central lubrication for all main axis linear guides and Z ball screw. 1 vacuum pump, 90 m3/h Console table consisting of: - 2 work piece stops fixed on the right and 2 on the left in the X direction, for movement in the Y direction - 10 adjustable support arms in the X direction, each with a rear stop - All stops are controlled by the program - The suction plates are fixed via the patented 2-circuit clamping system, eliminating the need for hoses. - 8 smooth support rails, automatically retractable - 2 push buttons for the workpiece clamping/releasing function Psdpfx Amjzuw Rtjfegr Additional 2nd vacuum pump, 90 m3/h 1 additional central stop row, for centering workpieces Chip conveyor 1 main spindle - Drive power: 10.0 kW in S-6 operation - 7.5 kW in S-1 operation - Tool holder: HSK F63, taper diameter = 38 mm, similar to DIN 69893 - Speed range: infinitely variable RPM, programmable 1 centrally integrated CNC axis, rotating 360 degrees - for all adapter units, with torque support on the main spindle and pneumatic interface 1 vertical drilling unit l14 with 6 spindles, horizontal and attachment unit for a dado cutter - Horizontal drilling units with 2 outputs each Attachment unit for a dado cutter - Swivel range: 0 or 90° Control system ICOS CNC Modern, powerful PC-based control system with: - User-friendly interface with Windows standards - Trajectory control of all servo axes - Job list / order processing - IMA backup and recovery system on two hard drives - Uninterruptible power supply (UPS) IMAWOP software package - for dialog-oriented creation of CNC machining programs - - 3D view and basic simulation of the programmed workpiece, the suction cups and consoles including tool and adapter display.

Condition: used, Year of construction: 2003, Single-sided edge trimming and gluing machine Manufacturer: IMA Type: AVM/K/I/G80/822/S3R3L20 Year of manufacture: 2003 For milling, edge gluing, and finishing for a standard groove - only for pre-shaped/pre-grooved doors and square-edged doors Left-hand machine (fixed stop on the left). Complete processing in 3 passes 1st pass: Processing of the top surface of the door (transverse processing) 2nd pass: Door long edge 3rd pass: Door long edge During the 2nd and 3rd passes, the protruding transverse edge from the 1st pass is milled off by using a co-rotating/counter-rotating milling process. Double groove gluing is only possible through modifications to the machine and subsequent manual finishing of the edge. Max. door thickness: - Straight edge: approx. 70 mm - Groove gluing: approx. 60 mm Stable machine frame as a support for aggregates and housing for electrical installation. Drive for feed speeds of approx. 5-25 m/min., mechanically infinitely adjustable. (not to be confused with processing speed) Continuous, plastic-coated strip-type conveyor chain, approx. 80 mm wide, with automatic central lubrication. Manually height-adjustable top pressure with a V-belt 80 mm wide and spring-loaded, ball-bearing guide rollers. Machine length approx. 10,900 mm Infeed table at the machine inlet. 1 horizontal, manually adjustable, unheated stop bar 1 joiner milling unit controllable, not swiveling, without sensing with 2 motors, each 3 kW Gluing unit for optional operation of straight edge or softforming gluing, by changing the glue application. Edge material: - Strips: up to 1.3 mm - Roll material: 0.4-3 mm - Solid wood strips: 6 mm Strip length max.: 2550 mm Strip height: 14-80 mm (depending on glue application) with: - Side adjustment by hand for the pneumatically controlled glue application. - Height adjustment by hand -15mm downwards and up to +10mm upwards. 1 bell for the main pressure roller, manually adjustable 1 glue application 0.8L, max. edge height 70mm, straight edge with pneumatic quick-release, Chem-Coat coated, electronic temperature control 1 hot melt glue application 0.8L with quick-release, up to max. 80 mm high edge material, soft edge, Chem-Coat coated, with temperature control and control unit for the strip coating 1 automatic Quickmelt hot melt glue feeder with a heating power of 5.0 kW 1 2-fold magazine only for edge material up to 3.0 mm thick, can be manually attached to the single-roll magazine 1 groove forming pressing unit for pressing the edge material into the groove with: Pgsdpfxszuykve Amfor - an activation unit 15 kW for re-activating the edge material for groove forming - a pneumatically controlled forming shoe for the underlapping edge - a pneumatically controlled forming shoe for the entire groove - additional post-pressing rollers for the edge areas in the groove - an electro-pneumatic lateral retraction device for the entire pressing unit 1 horizontal adjustment with mechanical digital display 1 trimming unit for 2 motors mounted on the top pressure for trimming the front and rear edge/strip overhang, for trimming cuts flush or with a bevel. 1 milling unit for 2 motors with height sensing, side sensing, for pre-milling from below and above with 2 motors 1kW, 400V, 200Hz, 12,000 RPM, 30° swiveling 1 milling unit for 2 motors with height sensing, side sensing, for fine milling from below and above with 2 motors 660W, 400V, 200Hz, 12,000 RPM, 30° swiveling Note: The technical data and descriptions are copies of the original order

Condition: used, Year of construction: 2016, Overview Complete craft microbrewery around a 250-litre batch brewhouse - the Slowbeer 250, built in 2016 by Škrlj d.o.o. (Slovenia). The package covers the whole process from malt crushing to bottling - brewhouse, two 1,000 L fermenters, hot water tank, glycol chiller, 4-spout bottling unit and malt mill. All main units date from 2016 - a turnkey set for a brewpub or a start-up brewery. Technical data - Brand: Slowbeer - main units built by Škrlj d.o.o., Slovenia - Model: Slowbeer 250 - Škrlj COMPACT BREWHOUSE MINI 250 L (type BHM 250, 2.5 hl) - Year of manufacture: 2016 Pjdpfxozvqi Sj Amfjgr - Batch capacity: 250 L - Heating: thermal-oil jackets, electrically heated - 400 V, 50 Hz - Material: stainless steel AISI 304 (EN 1.4301), vessel and jackets - Fermentation capacity: 2 x 1,000 L (nominal) Scope of Delivery - Compact brewhouse | Škrlj (Slowbeer 250) | COMPACT BREWHOUSE MINI 250 L | 250 L per batch, thermal-oil heated, agitator with Bonfiglioli gear motor, Lowara CO350/03K/A wort pump (2019), Pedrollo NGA 1B thermal-oil pump, IPROS TP4001/15 plate heat exchanger, control cabinet with Omron frequency inverters | 2016 - Beer fermenters, 2 units | Škrlj | ZKG 1000 L | nominal 1,000 L each (1,230 L gross volume per vessel), AISI 304, atmospheric vessel 0-50 °C, water/glycol cooling jackets on shell and cone (3.0 bar operating, 6.0 bar test), sample valve, level indicator, CIP spray ball; recirculation pump with cleaning hoses plus one unused spare pump | 2016 - Hot water tank | Škrlj | 1200 L | AISI 304, electric heating 24.4 kW, 0-90 °C, CE 0531 | 2016 - Glycol chiller | MTA | TAEevo TECH 020 | 400 V / 3-ph / 50 Hz, 3.9 kW electrical input, refrigerant R410A, water circuit max. 6 bar, hose circuit for the fermenter jackets, digital temperature control | 2016 - Gravity bottling unit | Mori-Tem | MODERNA B.4 A LE | 4 stainless steel filling spouts, Ebara JESX M5 feed pump, 230 V single-phase 50 Hz | 2016 - Malt roller mill | Egon Sommer Maschinenbau | PICCOLO 11 SB | 1.1 kW three-phase motor (230/400 V) | 2016 Transport dimensions (palletised, approx.) - Brewhouse: 2,400 x 1,200 x 2,200 mm, 660 kg - Fermenters (each): 2,700 x 1,100 x 1,245 mm, 240 kg - Hot water tank: 1,210 x 1,210 x 2,245 mm - Glycol chiller: 1,300 x 600 x 955 mm, 220 kg - Bottling unit: 1,000 x 700 x 1,650 mm, 180 kg - Malt mill: 800 x 600 x 1,200 mm, 90 kg Condition Used - very good to excellent overall condition. Brewhouse, fermenters and malt mill in excellent condition; chiller and bottling unit in good working order. The hot water tank is fully functional, with a light cosmetic dent on the top cover and normal limescale deposits inside. CE declarations and technical documentation are available for every unit except the malt mill, where the documentation is still being confirmed. Availability Immediately. Location: Spain. Dismantling and loading by arrangement.

Condition: ready for operation (used), Year of construction: 2014, operating hours: 1,618 h, travel distance Z-axis: 430 mm, number of axes: 5, number of slots in tool magazine: 16, table length: 4,300 mm, table width: 2,205 mm, spindle motor power: 13,000 W, spindle speed (max.): 20,000 rpm, swivel angle B-axis (min.): -99 °, swivel angle B-axis (max.): 100 °, swivel angle C-axis (max.): 360 °, This 5-axis BIESSE Rover A FT 2243 including WINSTORE 3D K1 was manufactured in 2014. It operates on a 400 V power supply. With approximately 1,700 hours of axis movement, this CNC wood machining centre is designed for precision and efficiency. If you are looking to get high-quality wood machining capabilities, consider the BIESSE Rover A FT 2243 machine we have for sale. Contact us for further details. Technical Data • Working Table Dimensions: 4,300 × 2,205 mm • Maximum X-Axis Speed: 80 m/min • Maximum Y-Axis Speed: 60 m/min • Maximum Z-Axis Speed: 20 m/min • Z-Axis Travel (3-/4-Axis Version): 325 mm • Z-Axis Travel (5-Axis Version): 430 mm • Maximum Workpiece Clearance in Z: 170 mm • Maximum Workpiece Clearance with Sweeping Arm: 120 mm • X-/Y-Axis Drive: Rack and Pinion • Z-Axis Drive: Ball Screw • Axis Guides: Linear Guides with Recirculating Ball Bearing Blocks • Vacuum Pump Capacity: 300 m³/h at 50 Hz • Vacuum System: 20 Independent CNC-Controlled Zones • Working Fields: 2 • Clamping Areas: 2 in X • Pneumatic Stops: 16 • Grid Table Pitch: 30 mm • Vacuum Module Dimensions: 132 × 146 mm • Vacuum Module Height: 29 mm • Vacuum Module Rotation Increment: 15° • Air Cushion Table Blower: Yes Pjdpfx Amezuygqofegr • Maximum Single Panel Thickness: 50 mm • Minimum Single Panel Thickness: 9 mm • Maximum Multiple-Panel Loading Thickness: 20 mm • Maximum Multiple-Panel Unloading Thickness: 60 mm • Protective Board Thickness: 8–25 mm • Maximum Panel Weight: 200 kg • Minimum Loadable Panel Size in Y: 800 mm • Unloading Conveyor Length: 4,800 mm • Maximum Unloadable Panel Length: 4,300 mm 5-Axis Machining Unit • Number of Axes: 5 Interpolating Axes • Tool Interface: HSK F63 • Cooling: Liquid-Cooled • Power S1: 11 kW / 15 HP at 12,000 rpm • Power S6: 13 kW / 17.4 HP at 12,000 rpm • Maximum Spindle Speed: 20,000 rpm • C-Axis Rotation: 360° Continuous • C-Axis Speed: 12.4 rpm • B-Axis Positioning Range: ±100° • B-Axis Speed: 12.4 rpm • Spindle Bearings: Ceramic • Drive Motor: Brushless, Digitally Controlled • Gearbox: Harmonic Reduction Gear • Lubrication: Lifetime Lubrication Drilling Head • Type: BH 26 2L • Maximum Number of Tools: 26 • Vertical Drilling Spindles: 16 • Vertical Spindle Arrangement: 8 in X / 8 in Y • Vertical Spindle Pitch: 32 mm • Horizontal Drilling Spindles: 4 with Double Output • Horizontal Spindle Axis Distance: 32 mm • Grooving Saws: 2 • Grooving Saw Directions: X / Y • Grooving Saw Diameter: 120 mm • Maximum Grooving Depth: 25 mm • Motor Power: 1.7 kW at 2,800 rpm / 3 kW at 6,000 rpm • Maximum Drilling Speed: 6,000 rpm Tool Magazine • Type: Turret Tool Magazine • Capacity: 16 Tools • Tool Position Spacing: 114 mm • Maximum Tool Diameter with Full Magazine: 110 mm • Maximum Individual Tool Weight: 7.5 kg • Maximum Total Tool Weight: 55 kg Automatic Loading / Unloading • Loading Direction: Front • Material Flow: Right to Left • Loading / Unloading System: Type B • Suction Cups: 5 • Automatic Loading Capacity: Up to 3 Panels • Sweeping Arm: Yes • Automatic Table Cleaning: Yes • Loading Table: Automatic X/Y Alignment • Unloading Conveyor: Motorized • Conveyor Control: CNC-Controlled • Conveyor End Detection: Photocell WINSTORE 3D • System: WINSTORE 3D K1 • System Length: 16,000 mm • Beam Length: 8,000 mm • Additional Modules: 3,000 / 6,000 / 8,000 mm • Maximum Suction Frame Length: 5,200 mm • Cross Conveyors: Belt Type, 5,200 mm • Panel Handling: Raw and Thin Panels • Panel Weight Detection: Load Cell

Year of construction: 2008, condition: ready for operation (used), This 4-axis LASAG KLS 246 CL60 was manufactured in 2008, a laser welding machine with enclosed class 4 safety cabin and camera window. It features a linear-motor XY table (X 400 mm, Y 100 mm), Z travel 300 mm, and a direct-drive rotary table for precision handling. L2-CNC control with SERCOS and a 15-inch touchscreen, plus dedicated water chiller included. Consider the opportunity to buy this LASAG KLS 246 CL60 Laser Welding Machine. Contact us for more information. Psdpfx Amozvyatjfjgr • Application: 4-axis positioning system for laser processing/laser cutting • Base and enclosure: • Welded steel base frame; dimensions LxWxH 1115 x 443 x 814 mm; color RAL 7035 • Granite structure with base plate, granite angle, bearing units, threaded bushings • Laser safety cabin, class 4 (EN 60825-1), full enclosure with viewing windows • Front sliding door with handle, integrated laser safety window, camera-supported laser protection glass • Sheet steel panels 2 mm, powder-coated RAL 7035; removable cover • 3-color signal light; door interlock switch; profile frame 30x30 and 60x30 • Axes configuration: • A axis: RT3A 100x100 direct drive rotary table • Z axis: PFS 325x300 precision slide • Y axis: PFL 230/400 linear axis • X axis: 180/100 linear axis • XY table (PFLG 400x100): • Travel: X 400 mm, Y 100 mm; speed 6 m/min • Positioning accuracy ±0.005 mm/300 mm; repeatability ±0.001 mm • Acceleration 10 m/s²; max load 1 kg • Continuous force with cooling 1110 N; linear motor drive • Material: cast iron GGG-25; water cooling • Encoder: Heidenhain LC 483, accuracy class ±5 µm • Z axis: • Travel 300 mm; speed 0.12 m/min • Positioning accuracy 0.03 mm/300 mm; repeatability 0.003 mm • Ball screw K25x5, accuracy class T5; preloaded spindle • Motor mounting via flange coupling; material cast iron; vertical installation • Rotary axis (A/C axis) RT3A100x100: • Electronically commutated 3-phase synchronous motor • Table diameter 99 mm; through hole 20 mm; centering 30 H7 • Weight 5.2 kg; protection class IP40 (IP54 with air purge) • Runout

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 1183016, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, workpiece length (max.): 1,270 mm, workpiece width (max.): 635 mm, workpiece height (max.): 508 mm, workpiece weight (max.): 794 kg, table width: 475 mm, table length: 1,321 mm, overall weight: 6,033 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 2,240 W, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, MACHINE Vertical machining center, HAAS, VF-4SS STANDARD EQUIPMENT: CNC control, 4 axes, HAAS type (NGC version), compatible with Fanuc, ISO programming, G-codes ISO40 spindle taper, CT type 1 GB memory capacity 15" LCD monitor, touchscreen and USB port Ethernet + WiFi network card Early voltage drop detection module (prevents the effects of voltage drops) HaasConnect – remote monitoring of machine operating status via the Internet, VNC and DPRNT protocol Program restart – ability to start the program from any block RunStopJogContinue – ability to move the tool without interrupting the program SafeRun – active anti-collision system (minimizing the effects of collisions) Electronic handwheel Spindle cooling system Pedpfszt Nlmox Amfegr Temperature compensation for ball screws Protective cabin with sliding front doors and side windows Side magazine with 30 positions Memory lock Spindle taper air blow system Thread cutting without a compensating chuck (rigid) Installation for connecting compressed air Cooling system with a pull-out coolant tank, filled with coolant Automatic central lubrication system Machine tool lighting "Guns" for air and coolant (mounted on the front of the machine) 4AXD – Machine preparation / connections, wiring / For connecting the table, without a table AUGER – Screw chip conveyor HSM – Faster processor with look-ahead function, accelerating the machining of shapes with 3-axis interpolation ACF – Additional 25 μm filtration system, essential for machining cast iron, aluminum, wood, and phenol-based and other dusty materials TSC* – Through-spindle cooling, pump with increased power /21 bar, 22 l/min/ (ACF option required) WIPS-R – Renishaw probe set, wireless, for measuring tool radius and length, for measuring and setting using (graphic) measuring cycles. SO – Spindle orientation MACRO – Parametric programming COORD – Scaling and rotation of the coordinate system VPS (Visual Programming System) – graphic machining cycles, expansion and creation of custom cycles

Condition: used, Year of construction: 2021, - Cutting width: 1250 mm - Cutting length: 2800 mm Panel saw Manufacturer: Felder Format4 Type: Kappa 550 Year of manufacture: 2021 Technical data - Saw blade: 250 - 550 mm - Cutting height: 202 mm (90°), 140 mm (45°) - 3 speeds: 3000/4000/5000 RPM - Cutting width: 1250 mm - Cutting length: 2800 mm - Control system: Kappa 550 e-motion - Surface area of the extension table: 1250 x 650 mm - Telescopic fence allows for crosscuts up to 3200 mm - The crosscut fence can be swivelled from 90° to 45° - Circular saw extension of 1200 mm behind the saw blade axis - The positioning of the parallel fence is done electronically via a ball screw integrated dust-free into the circular saw table Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding. Pgodezuy A Ejpfx Amfor

Condition: new, #K CNC Lathe Müga Type / Model iUltimate i42-2s Control Mitsubishi M830 Condition New Podpjzv Thkofx Amfegr #ABAN Technical Data Axes: "10 NC Axes" Main Spindle: X1, Y1, Z1, C1, B1 Counter Spindle: X2, Y2, Z2, C2, B2 Description Main Spindle Spindle Speed 6000 rpm Motor 7.5/11 kW Chuck 173E A5 spindle nose Spindle Bore 42 mm Driven Tools 12, 1.5 kW, 4000 rpm Tool Holder ER 20 OD Tool Holder 20 mm x 6 pcs ID Tool Holder 20 mm x 5 pcs X/Y/Z Travel Ø 300 / Ø 770 / 250 mm Servo Motor 1.5 kW Rapid Traverse 30 m/min Hydraulic Motor 0.75 kW, 75 l Coolant Pump 1.5 kW, 240 l, 5 bar, 75 l B Axis Motor 0.75 kW, 360° C Axis braked Description Counter Spindle Spindle Speed 6000 rpm Motor 2.2/3.75 kW, built-in Chuck 173E A5 spindle nose Spindle Bore 30 mm Driven Tools 12, 1.5 kW, 4000 rpm Tool Holder ER 20 OD Tool Holder 20 mm x 5 pcs ID Tool Holder 20 mm x 9 pcs + extension. X/Y/Z Travel Ø 900 / Ø 770 / 300 mm Servo Motor 1.5 kW Rapid Traverse 30 m/min Coolant Pump 2.0 kW, 25 bar, 30 l Part Ejector Pneumatic B Axis Motor 0.75 kW, 360° C Axis braked Total Tools 49 Dimensions L x W x H approx. 3.8 m x 2 m x 2 m Weight approx. 5600 kg Travels Rapid Traverse X1 Ø 300 mm 30000 mm/min Y1 Ø 770 mm 30000 mm/min Z1 250 mm 30000 mm/min X2 Ø 900 mm 30000 mm/min Y2 Ø 770 30000 mm/min Z2 300 mm 30000 mm/min C1 360° 60 rpm C2 360° 60 rpm B1 360° 30 rpm B2 360° 30 rpm Features: Linear axes with servo motors The 6 linear axes are equipped with Mitsubishi servo motors and directly coupled to the ball screw. This ensures maximum accuracy. Simultaneous machining on main and counter spindle Two programs (workpiece front and back) can be processed independently on the main and counter spindle. Synchronous part removal The workpiece can be removed during rotation, so that one workpiece can be machined while another is being removed. B-axis inclined machining The iUltimate is equipped with two swivel heads on the main and counter spindle, allowing for machining on both sides at an angle. Equipment: Swiveling control panel Driven tools Workpiece clamping device Workpiece conveyor belt Extendable chip conveyor Coolant system 4x internal coolant for main spindle Intelligent handwheel Collet chuck 173 E Interface for bar loader C-axis main and counter spindle Disc brake for C-axis main and counter spindle Y-axis main and counter spindle Central lubrication Work area light Signal light on the machine Control cabinet heat exchanger Mounting elements various tools

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Equipment and technical data: - Electrics 3x400V 50 / 60Hz - Gimbal-mounted 5-axis electrospindle 12 kW (S6) HSK F63 - 24,000 rpm - ceramic bearings incl. liquid cooling with infinitely height-adjustable extraction hood - electric-motor controlled - full rated power at approx. 12,000 rpm - speed: 1000 - 24000 rpm - drive: 3-phase HF motor, inverter-controlled - direction of rotation: clockwise/counter-clockwise - 2 controlled compressed-air connections - interface for aggregates - tool weight (rotating): 6 kg - max. saw blade Ø 350 - spindle cooling: liquid cooling - extraction hood infinitely variable - Profit H350 16.30: CNC machining centre in gantry design (without tool) with digital drives (driven on both sides). Pgodpfx Ajzlbpbomfsr The machine column of the Profit H350 16.30 is made of thick-walled, electrically welded rectangular tubes. The steel ribbing inside the column achieves high stability. - Machining field H350 16.30: Travel of the axes: X = 4000 mm Y = 1970 mm Z = 455 mm Working field: X = 3000 mm Y = 1500 mm Z = 150 mm clearance height Axis positioning speeds: depend on the selected safety system (these can be found in the layout). - Travelling gantry driven on both sides - Guide system X axis: The travelling gantry of the X axis is driven via a rack with inclined, crowned tooth form - This guarantees highest precision. The reduction gear ensures highest machining quality and repeat accuracy. The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. - Guide system Y axis: The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. The Y axis is positioned by means of a ground recirculating ball screw. - Guide system Z axis: The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. The Z axis is positioned by means of a ground recirculating ball screw. - Automatic central lubrication: The grease is delivered in a controlled manner to the guide carriages of the X, Y and Z axes as well as to the recirculating ball screws in Y and Z. The lubrication process is carried out automatically after a specified time. - 12-position linear tool changer on the left of the machine column incl. a pick-up position for aggregates: The 12-position linear changer ensures shortest changeover times and offers sufficient space for milling tools. One aggregate change position (fitting variants see layout) Max. tool diameter 250 mm Max. tool length 240 mm - Drilling head DH 18 6H 1S: Vertical 12 spindles: 7 spindles in the X direction and 5 spindles in the Y direction. Horizontal 6 spindles: 4 spindles in the X direction and 2 spindles in the Y direction. Forward stroke = 70 mm max. drill length = 70 mm and shank D = 10 mm. All spindles are individually driven and selectable. 1 grooving saw – in the X direction max. saw blade diameter 120 mm max. blade thickness 5 mm max. speed infinitely variable up to 7500 rpm. The drilling group covers the entire working field both horizontally and vertically. - Controlled central extraction connection: Via the program control, either the drilling head or the milling spindle is extracted. This controlled slide gate achieves an optimised extraction performance. Connection diameter see layout - 6 workpiece supports: With front and rear...

Condition: new, neu ca. 6 Monate ab Auftragse Taiwan 83670 € 1581.36 € 810 mm 610 mm 800 x 400 mm 800 x 400 mm 5 - 25 m/min 0 - 2.250 mm/min 450 mm 0 - 675 mm/min 480 mm 500 - 2200 1/min 3,75 (optional 5,5 / 7,5) kW 1.5 kW 3250 mm 3075 mm 2250 mm 2900 kg 175 kg 350 kg 355 x 50 x 127 mm 1,1 kW Fully enclosed splash guard 10.4" graphic NC control on a swivel arm with touchscreen for: Operating mode selection Cycle selection and program creation Surface grinding Cross grinding Plunge grinding Dressing with automatic compensation Semi-automatic balancing in the machine Automatic spindle speed for constant surface speed Spindle load visualization Unbalance control Graphical status monitoring Alarm list automatic vertical feed servo drive for grinding wheel feed and table cross feed heavy duty spindle with 2 sets (4) of class P4 super precision angular contact ball bearings hardened and ground C2 grade ballscrew on crossfeed and elevation hardened slide ways electro-magnetic chuck coolant equiptment with aut. paper filter and magnetic separator autom. dressing attachment table mounted with compensation grinding wheel grinding wheel flange grinding wheel balancing stand LED machine lamp machine and equipment according to the CE-regulations user manual in GERMAN and ENGLISH OPTIONS (PRICES ON REQUEST): autom. dressing attachment mounted over the wheel version without fully enclosed splash guard Pgjdezwqa Hopfx Amfer

Condition: used, mileage: 7,450 km, power: 140 kW (190.35 HP), first registration: 03/2025, fuel type: diesel, overall weight: 3,100 kg, fuel: diesel, color: grey, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 7, Equipment: ABS, air conditioning, airbag, central locking, navigation system, parking sensors, power assisted steering, seat heater, sliding door, soot filter, E07 Hill-start assist, F2W Winter package, CF8 Sports suspension, Q50 Trailer coupling with detachable ball head, JA7 Blind Spot Assist, T56 Electric operation for left sliding door, T55 Electric operation for right sliding door, EY5 Mercedes-Benz emergency call system, BS1 Brake calipers with Mercedes-Benz lettering, EY6 Breakdown assistance, B25 Electric parking brake, G43 9G-TRONIC, CM2 Bumpers and attachments painted in vehicle color, FS5 Illuminated mirrors for sun visors, EI0 Wireless charging system for mobile devices, LG4 Tail, brake and indicator lights in LED technology, RK1 Tires 245/45 R19, XO7 Mercedes-Benz Mobilo with extended warranty and roadside assistance, SE5 Lumbar support for driver's seat, SE4 Lumbar support for passenger's seat, QA4 Trailer load capacity 2500 kg, T70 Childproof locks on doors in the passenger compartment, ZC6 Sales code 1, T74 Grab handle for entry, HH4 Automatic climate control THERMOTRONIC, UR1 Seat rail system with quick-release mechanism, XX4 Model year G4-II, V33 Carpet in the rear, E1E Digital extra: hard drive navigation, RL3 Light alloy wheels 8 J x 19, V36 Headliner, E1D Digital radio (DAB), Y10 First aid kit, MJ8 ECO Start-Stop function, IB6 Model series C447 Vito/V-Class, VL2 Velour floor mats, ES3 12V sockets for rear seat rows, right and left, ES2 12 V socket in trunk / cargo area, F3T Decorative elements in wood-look olive dark grey with open-pore finish, VD5 Interior headliner crystal grey, E1T Touchpad, H00 Warm air duct to passenger compartment, F48 Heater for windshield washer system, F3Z Comfort closing, IK3 Luxury station wagon, HI1 Climate zone 1 (cold/comfort), W64 Separately opening rear window, XY5 Model year 5, V44 Carpet in the vehicle interior, front, C6L Multifunction steering wheel, RM4 Comfort tires, US7 Single seat 1st row, We are available by phone Monday - Friday until 8:00 PM and Saturday until 4:00 PM!! Further:!! Leasing/financing and trade-in possible!! !! !! -Errors and prior sale excepted!! -All information without guarantee ... more on our homepage Pgodozwwnwjpfx Amfor

Condition: excellent (used), pulling force - max. 3 t max. ram stroke 1000 mm max. workpiece diameter 500 mm table surface area 500 x 400 mm tool length - max. 1200 mm total power requirement 1,5 kW weight of the machine ca. 0,4 t dimensions of the machine ca. 1,0 x 0,8 x 1,5 m round table (450 mm) with indexing, many accessories. Pgsdpfszu Tn Iox Amfjr

Condition: new, Year of construction: 2023, Stable cast iron construction Milling spindle can be swiveled backwards from 0° to -45° Right-left rotation of the milling spindle Generously dimensioned milling unit made of cast iron, attached directly to the table Solid and precise cast iron table Standard curved milling protection hood Aluminum sliding carriage ball contact system Torsion-resistant, highly precise, smooth-running and problem-free in daily use 10-year SCM guarantee on wear of the guideways Milling spindle mounted high up with precision ball bearings, resulting in the lowest possible bearing load and the longest possible service life Exact router fence with quick adjustment and fine adjustment with a scale on the stop jaw Integrated suction connection Large milling table opening allows the use of larger tools Weight approx. 290 kg Extraction connection diameter 2 x 120 mm Working table L x W = 1000 x 435 mm Table height 900 mm Pgodpfx Aeiknp Remfer Sliding carriage length 1000 mm Sliding carriage width 270 mm Drive motor power 5.0 kW, 400 V, 50 Hz Milling spindle inclination 0 to -45 ° Spindle usable length 100 mm Overhang max. above table 130 mm Spindle speeds 3500/7000/10000 rpm Mandrel diameter 30 mm Tool diameter max. lowerable 180 mm

Condition: used, mileage: 1,25,000 km, power: 130 kW (176.75 HP), first registration: 07/2011, fuel type: diesel, overall weight: 7,490 kg, color: white, gearing type: mechanical, emission class: euro5, number of seats: 3, loading space length: 4,000 mm, loading space width: 2,500 mm, Year of construction: 2011, Equipment: ABS, air conditioning, central locking, crane, parking heater, soot filter, Buy online. Finance digitally. Have it delivered nationwide. ----Chat now via WhatsApp: Get in touch with our sales consultant quickly and easily. Internal ID number: [3567]---- Your advantages with us: * Digital consultation by phone or WhatsApp * Financing options, even without a down payment * Trade-in of your vehicle, whether old or new Optional extras: * 12-60 months used car warranty (valid throughout the EU) Podpfx Aszwttijmfegr * New inspection * New TÜV & emissions test * Nationwide delivery---- For sale: a versatile Mercedes-Benz Atego 818 with a Meiller three-way tipper and a Palfinger loading crane PK 7001-K A. 19% VAT deductible German vehicle Accident-free First owner Euro 5 standard Regularly maintained Ready for immediate use * Original Meiller three-way tipper * Steel side walls, foldable on the sides and at the rear * Palfinger loading crane PK 7001-K A * Crane mounted behind the loading area * Two hydraulic extensions * Hydraulic supports * Manual crane control with multiple control functions * Emergency stop switch * Load capacity according to the load chart up to approx. 3,200 kg * Reach up to approx. 8 meters * Crane can be fully folded EQUIPMENT * Trailer coupling Rockinger + ball head * Air conditioning * Trailer connections * Differential lock * ABS * Power steering * Driver's suspension seat * Electric windows * Exterior mirror system with wide-angle mirrors * Exterior sun visor * Rotating beacon * Work lights * Radio * 3 seats * Leaf suspension * Auxiliary drive for tipper and crane ---- Do you want to lease or finance? We offer attractive deals – even without a down payment! Please contact us. Contact: Phone: WhatsApp: E-mail: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln – Germany Opening hours: Mon-Fri: 9:00 a.m. – 6:00 p.m. Sat: 9:00 a.m. – 2:00 p.m. All information on the internet is non-binding and serves only as a general description of the vehicle. Errors, typos and prior sale are subject to change. The binding condition of the vehicle results exclusively from the purchase contract on site or through written assurances.

Condition: good (used), TOS Pgsdpjzlg N Tsfx Amfsr CNC CONSOLE MILLING MACHINE WITH CNC CONTROL HEIDENHAIN TNC310 TYPE: FV30 MACHINE NO.: 203300233 YEAR OF MANUFACTURE: 1998 Technical data: Longitudinal travel – X-axis: 760 mm Transverse travel – Y-axis: 381 mm Vertical travel of the quill – Z-axis: 152 mm Vertical travel of the console: 450 mm Table size: 305 x 1300 mm Max. workpiece weight: 360 kg Spindle mounting: ISO40, DIN 69871 A Speed range: continuously variable, 100-4000 min-1 Drive power: 5.5 kW (7.5 kW / 5 min.) Weight: 2700 kg Equipment: - CNC path control HEIDENHAIN TNC310 - Electronic handwheel - Pneumatic tool programming - Automatic central lubrication for guides and ball screws - Coolant system, capacity 42 l - Machine light - Various tool holders - Standard accessories - Documentation - CE conformity

Condition: used, mileage: 19,953 km, power: 174 kW (236.57 HP), first registration: 01/2025, fuel type: diesel, overall weight: 3,100 kg, fuel: diesel, color: silver, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 4, Equipment: ABS, air conditioning, airbag, bunk beds, central locking, cruise control, immobilizer system, navigation system, onboard computer, parking heater, parking sensors, power assisted steering, seat heater, sliding door, soot filter, traction control, E07 Hill Start Assist, ZK0 EASY UP pop-up roof, E7H MBUX Multimedia System High, Q50 Detachable ball-head tow bar, T55 Electric operation for right sliding door, JB6 Park Package with 360 camera, EY5 Mercedes-Benz Emergency Call System, BS1 Brake calipers with Mercedes-Benz lettering, EY6 Breakdown management, B25 Electric parking brake, EI0 Wireless charging system for mobile devices, R1O 7.5Jx18 light-alloy wheels, 5-twin-spoke design, LG4 LED technology tail, brake and indicator lights, XO7 Mercedes-Benz Mobilo with DSB and GgD, SE5 Driver's seat lumbar support, SE4 Passenger seat lumbar support, QA4 Towing capacity 2,500 kg, T70 Child safety locks on passenger compartment doors, ZC6 Sales code 1, T74 Entry grab handle, Y10 First aid kit, MJ8 ECO Start-Stop function, IB6 Model series C447 Vito/V-Class, 805 AEJ X4/1, VL2 Velour floor mats, H00 Warm air duct to passenger compartment, YS1 Lower bed sleeping pad, C6L Multifunction steering wheel, Z43 Registered as special vehicle: motorhome, C74 Illuminated entry badge with Mercedes-Benz lettering, H12 Auxiliary hot water heater, J55 Seatbelt warning system for passenger seat, XA8 Weight variant 3,100 kg, SH2 Thorax-pelvis sidebag for passenger, SH1 Thorax-pelvis sidebag for driver, RF8 Tire brand Michelin (80), SH9 Window airbags for driver and passenger, H20 All-round heat-insulating glass, JW8 ATTENTION ASSIST, Y44 Warning triangle, W05 Rear windows: left fixed, right opening, JX2 Service interval 40,000 km, FP3 Mirror package, BH1 HOLD function, SZ8 Storage net on passenger seat backrest, Z6M ., We are happy to provide you with an individual financing or leasing offer and accept your used vehicle in part exchange. We look forward to welcoming you to our dealership for further consultation. Vehicle condition in accordance with age and mileage; partial repainting was performed as part of reconditioning. No liability for printing or typing errors. Subject to change and prior sale ... more on our homepage. Pgsdpfx Aoyqn Aaemfer

Condition: used, Year of construction: 2006, * Work area: 2,650 x 1,240 mm * X-Y travel: 2,995 x 1,385 mm * Z-axis travel: 200 mm * Clearance height: 180 mm C-axis deactivated - 3-axis machine The structure of the base body is a monolithic construction made of thick-walled steel. It is reinforced throughout the machine bed by welded triangular plates, making it extremely stable. The triangular shape used for the supporting parts, with a large base, is the key to long-lasting precision and stability. The machine's layout allows the user an optimal workflow despite minimal space requirements. The base body, constructed in this way, provides the machining unit with a balanced and secure base with particularly good load distribution. The mobile unit carrier is made from a solid monoblock. It is positioned in the X-direction on prismatically ground guides via ball screw slides. The machining unit is, in turn, attached to the mobile unit carrier on prismatic, ground guides and the ball screw slide. Description of units and accessories (base) Drilling unit: Drilling head with 12 + 6 spindles * 7 individually selectable vertical spindles in X * 5 individually selectable vertical spindles in Y * 4 horizontal spindles in X (2+2) * 2 horizontal spindles in Y (1+1) * Speed: 4,000 1/min * Power: 2.2 kW * Grid: 32 mm * Drill chuck: M 10 with Morse taper No. 11 Nut saw unit in "X": * Integrated in the drilling head * Nut saw blade with a diameter of up to max. 120 mm Main milling unit (Position 2): * Tool holder HSK 63F * Speed 1,500 - 24,000 1/min, stepless via inverter * Motor power 4.4 kW (6 hp) from 12,000 1/min (S1) * Motor power 6.6 kW (9 hp) from 12,000 1/min (S6) * Right/left rotation * Ceramic bearings * Scope of supply: 4 pcs. tool holder (right) without collet Tool changer R8L Automatic tool changing device for 8 tools. Mounted on the rear unit carrier for quick access to the tools. Pedpfex Twccjx Amfegr * Number of tool positions: 8 * Max. tool diameter: 120 mm * Max. weight per tool: 4.5 kg * Max. total weight of all tools: 22 kg * Holder for 1 angular gear * Mounted and moving in X Horizontal milling unit (Position 1) Horizontal unit with two opposite outlets for milling and grooving. * Speed 9,000 - 18,000 1/min, stepless via inverter * 1 outlet for collet 3-20 mm (ER 32) * 1 outlet for saw/collet 3-12 mm (ER20) (For saw D=120 mm / bore 50 mm) * Motor power 3 kW (4 hp) * Max. tool diameter, front milling: 20 mm * Max. tool length, front milling: 110 mm * Max. tool diameter, rear milling: 12 mm * Max. tool length, rear milling: 80 mm * Max. saw blade diameter: 100 mm * Bore in saw blade (ER 32): 50 mm * Arbor diameter, saw blade (ER 20): 12 mm Work table The work table is designed to guarantee the operator maximum "freedom of movement". The vacuum quick-clamping system offers maximum flexibility with precise positioning and optimal workpiece clamping. * 6 supports 1000 mm, stepless pneumatically adjustable in X * 12 vacuum suction cups, round D = 110 mm, steplessly adjustable in Y (2 pcs. per support) * 2 stops in X (1 x left / 1 x right) * 1 stop in Y per support (total 6 pcs.) * The retractable reference stops are CNC-controlled * Pendulum machining standard (2 working areas) --- other clamping systems are available as optional extras --- Axis movement The drive system in X, Y and Z is via ground ball screws.

Condition: used, Year of construction: 2018, Edge banding machine AKV 3006 DK - F with joint milling unit including DIA tools, joint thickness up to 40 mm, workpiece thickness up to 3 mm, combined milling station, radius R 2.5 mm. Technical description: with hot melt adhesive application to the workpiece for edge material up to 3 mm. 60 mm workpiece thickness without joint unit, 40 mm workpiece thickness with joint unit, maintenance-free, coated adhesive reservoir, HF trimming station (16,000 rpm) for front and rear edge overhang, HF milling station (16,000 rpm) with replaceable blade milling cutter (combined design) and fine milling adjustment from the operator side, free spaces for additional processing units (Hebrock system), feed rate approx. 10 m/min, cutting depth adjustment of the trimming saw, signal lamp for workpiece sequence, robust chain drive, ergonomically arranged control panel, double roller pressure beam, unit viewing windows from the rear and operator side of the machine, PLC control including touchscreen. Technical data: - Feed speed 10 m/min. - Board thicknesses from 8 - 40 mm - Weight: depending on the equipment, approx. 1550 kg - Dimensions (L x W x H) 5250 x 1445 x 1600 mm Airtronic incl. cooling and antistatic spraying device 2014, 1 unit Hot air unit for creating an optical zero joint using special edge materials designed for this purpose. - including pneumatic adhesive reservoir positioning - including cooling and antistatic spraying device - including 2 additional edge channels in quick-change design - including special version corner rounding milling cutter, maximum workpiece thickness 60 mm and minimum workpiece length 200 mm - exclusively for Hebrock edge banding machines of the 3000 series - retrofitting possible later - additional costs upon request Technical data: - max. board thickness 40 mm - max. edge thickness 1.2 - 2.0 mm - 7 - 10 m/min feed speed - Air consumption approx. 280 - 580 l/min (only Airtronic), electronically controlled - ready for operation after approx. 2 min Psdpfxsx S Hmzo Amfjgr Upgrade to 8 mm edge thickness, 1 unit, up to a maximum of 40 mm workpiece thickness including pneumatic saw adjustment special version, minimum workpiece thickness 8 mm, 1 unit 3-point pneumatic milling adjustment, 1 unit Switching between radius - chamfer - flush for the combined milling stations. This eliminates the manual adjustment at the combined milling station for the 3rd stop point. PLC control is essential. Cleaning station (wiper), 1 unit Corner rounding milling cutter, 1 unit, including combined tool and pneumatic adjustment for chamfer/radius, maximum workpiece thickness 40 mm, minimum workpiece length 300 mm, radius R 2.0 mm. Radius pull blade, 1 unit, including pneumatic feed device, radius R 2.0 mm. Flat pull blade, 1 unit, with pneumatic feed control. Chassis complete, 1 unit Adhesive station change system including adhesive outlet device downwards, in preparation, 1 unit, without 2nd adhesive reservoir. - including the possibility of processing PU adhesive with the machine Dado cutter unit, vertical, in the board, 1 unit, including pneumatic feed device. Vertical dado, groove width 8.2 mm, groove depth 8.0 mm, distance from the workpiece edge 14.0 mm Special version, dado cutter motor with higher motor power, 1 unit Internal extraction of the joint unit, 1 unit, at the extraction manifold of the machine Ball bearing for corner rounding milling cutter 24.1 mm, 1 unit Ball bearing for corner rounding milling cutter 24.2 mm, 1 unit Release agent spraying dev