Used Basin Of Part Of for sale (196)

Condition: ready for operation (used), The U2PRW cutting and drilling machine is designed for processing slats and furniture fronts made of solid wood or MDF. The machine works in a semi-automatic cycle. During one cycle the machine performs: cutting at a given angle (in the range of 45 - 90 degrees) and drilling in the jammed plane, or the edge of the element. - Made in Poland TECHNICAL PARAMETERS: max. height of cut material 60 mm max. width of cut material at an angle of 45° 70 mm max. width of the material at an angle of 90° 150 mm Bjdpfxjq Ii Dlo Abzelp max. length of cut material 2200 mm min. length of cut material at 45° 455 mm diameter of main saw 250 or 300 mm undercutter diameter 100 mm max. diameter of bottom milling cutter 35 mm max. depth of bottom milling 15 mm diameter of face drill embedment and bottom milling cutter 10 mm Drill head (face drilling): spindles 4 axial spacing of spindles 32 ; 32 ; 40 mm linear arrangement of spindles max. depth of face drilling 60 mm installed power 7 kW working pressure 0.6 Mpa overall dimensions (length / width / height) 4300 / 1600 / 1570 mm Machining units The machine is equipped with two machining units. The left unit, which is fixed, and the right unit - a sliding unit. Each machining unit consists of the following sub-assemblies - units: a main saw, an undercutting unit, a drilling unit that drills into the jammed plane, and a drilling unit that drills into the bottom of the workpiece. Bottom hole drilling unit The described aggregate is installed as an option. It is used in the processing of corner ties for doorframes with adjustable width. It makes a blind bore , for the can connector. The picture shows the mounted red cover which is at the same time the base for the machined angle strips and the cover with chip extractor. Workpiece pressure The machine tool is also equipped with a clamping system operating in two planes. The clamping area includes horizontal and vertical clamps. The horizontal clamps are responsible for pressing against the vertical bases and straightening the workpiece. Vertical ones, on the other hand, are responsible for immobilizing the workpiece during machining. The horizontal pressure always precedes the vertical pressure. Control The machine's control is clear, easy to use and functional. It allows switching on or off all aggregates separately, additionally with division into left and right sides. All aggregates have independent drive. The right-hand processing unit is set by pressing the control buttons on the control panel. The executive mechanism is a gearbox with an electric motor driving a trapezoidal screw. An electronic control system US with an operator panel and digital display is used to read and set the length of the workpiece. This system is also responsible for automatic corrections to the counter readings when the cutting angles change by 45° and 90°. In addition, it is responsible for automatic basing.

Condition: new, Year of construction: 2025, Joining unit: Yes Edge thickness: maximum 3mm Workpiece thickness: from 8mm - 50mm Workpiece width: minimum 110mm Glue basin: granular, quick change basin cross-cut shear: yes cross-cutting / flush sawing: yes Milling station: chamfer / radius corner copying: yes Flat - scraper: yes Radius scraper: Yes Buff: Yes Non-stick spray unit: Yes Infeed ruler adjustment: manual workpiece thickness adjustment: manual power input: 5 kW Bledjk Eai Uepfx Abzep machine length: 3314 mm Machine width: 1085 mm Weight: 545 kg

Condition: excellent (used), Year of construction: 2020, Equipment: Integrated dosing pump/dosing module for rinse aid Integrated dosing pump/dosing module for liquid detergents Rinsing chamber made of high-quality stainless steel Spray arm control of all arms Manual hood opening Automatic program start after closing the hood Adjustable rinse temperature Turbidity sensor Adjustable rinse temperature Adjustable rinse time Heat recovery from waste water and exhaust air Vapour extraction Temperature display for tank and boiler Hygienic tank washing chamber Innovative spray arms Pump protection sieve Grease filter Extensive accessories (option)Miele pass-through dishwasher with exhaust air and waste water heat recovery - integrated dosing & water softener, PTD901 SST WES DOS ECO [6.4 kW] , 11917950 Always the right program Dishware-specific solutions Dishware-specific programs No matter what the dishes are and what the soiling: For There is an effective program for every requirement. Simple and flexible operation Full-touch display Full-touch display All important information is quickly and easily accessible via the convenient full-touch display. Design and execution Design pass-through dishwasher Line Dishwashing system Number of wash levels 1 Front stainless steel Tank volume in l 35.0 Application: Suitable for senior citizens' and nursing homes Suitable for hospitals Suitable for restaurants/bars Suitable for hotels Suitable for guest houses Suitable for communal catering Suitable for kindergartens Suitable for universities and schools Suitable for quick-service restaurants Suitable for sports clubs Equipment: Integrated dosing pump/dosing module for rinse aid Integrated dosing pump/dosing module for liquid detergents Dishwashing chamber made of high-quality stainless steel Spray arm control of all arms Manual hood opening Automatic program start after closing the hood Adjustable rinse temperature Turbidity sensor Adjustable rinse temperature Adjustable rinse time Heat recovery from waste water and Exhaust air Vapour extraction Temperature display for tank and boiler Hygienic tank rinsing area Innovative spray arms Pump protection sieve Grease filter Extensive accessories (option) Mile hood dishwasher with rinse aid dispenser Descaling system Washbasin as side table left and right as a pass-through Washing baskets for glasses, plates and pots Connection 16 Ah Bedpfxjgh Hu Hs Abzjlp

Year of construction: 2014, condition: excellent (used), Complete lumber drying and steaming line, year of manufacture 2014, second hand - 2 Baschild TDK drying chambers, each with a capacity of 100 m³/cycle, and 1 Baschild DVKI steaming chamber with a capacity of 30 m³/cycle - Thermal energy is supplied via superheated water at 130°C - Chambers are insulated with included mineral wool - Connections required: heating fluid/hot water at the external chamber flanges, cold water for humidification at threaded external pipes, cold water for wet bulb sensor at the technical room to be built next to the installation, 400V electricity for each electrical panel and 230V for the panel server, as well as LAN connection to the panel server Characteristics of the TDK drying chambers (2 units) - Net drying dimensions: width 9000 mm, net depth 8700 mm, net height 4100 mm - Loading is performed by forklift - Ventilation system: 6 fans per chamber, each with Danfoss FC102 inverters - Control system: Baschild ZOOM Server configuration DVKI steaming chamber characteristics (1 unit) - Net capacity 30 m³/batch - Sliding door Bodpfxow Ewlbj Abzslp - Baschild ZOOM thermostat - Oxyvent overpressure system - Heavy-duty supporting structure Included accessories: stainless steel basins and radiators on 3 sides Thermal agent production options (optional) - Superheated water boiler, 1 Gkcal/h, automatically fed with wood waste, year of manufacture 2014, brand SCEAT Italy, with flue gas exhaust system consisting of fan, multi-cyclone, fittings, and chimney - Silo with 2 scrapers with hydraulic pistons and hydraulic control unit for boiler feeding, dimensions 6000×4000 mm, year of manufacture 2014

Condition: new, Model: SX 1001/20 Dimensions: 6,058 mm x 2,438 mm x 2,890 mm Clear room height: 2,500 mm Equipment: 1 metal door 875 x 2000 mm 2 tilt and turn windows PVC 600 x 600 mm Electrical equipment: Schuko sockets and light switches 2 fluorescent tubes 58 W 1 electric convector 1,00 kW 1 glass lamp 60 W Bledegl Nyhepfx Abzop Sanitary equipment: 3 hand wash basins 3 instantaneous water heaters 5 l with mixer tap 5 WC 3 mirror, shelf, towel hook, paper holder drain DIN 100, inflow: 3/4". Price plus VAT and transport rent on request AZ18900

Condition: as good as new (ex-display), Year of construction: 2025, Ultrasonic washing system - ultrasonic cleaning device chamber made of stainless steel 1.4401 (AISI 316L) - incl. insulated hinged lid - incl. level control /dry run protection - incl.1 piece stainless steel basket - floor ultrasound, frequency: 38 kHz, power (eff./peak): 1.600/3.200 Watt Bedpfx Abjkuy D Hezolp - Heating adjustable up to 80°C; power: 6,000 watts - Basket dimensions: LxWxH 920 x 380 x 350h mm - Basin dimensions: LxWxH 1,000 x 450 x 450h mm - Outer dimensions: LxWxH 1.210 x 690 x 900h mm - max. loading weight of the basket: 50 kg - total weight of the unit: 160 kg - unit is mobile

Condition: used, maximum load weight: 3,400 kg, overall weight: 7,500 kg, axle configuration: 2 axles, first registration: 09/2025, Equipment: ABS, TT XL horse trailer GG:7.500KG 3-4 horses, aluminum floor, 2 sleeping berths, fully equipped apartment, seating group, with shower, refrigerator, air conditioning, micro, washbasin, WC, side window. Diesel heater, rear ramp. * NET SALE POSSIBLE. * TOP leasing offer possible. Location and viewing of our vehicles: Bledexagktepfx Abzop STX HORSETRUCKS GERMANY Hamburgerstrasse 65 23816 Leezen Sales and service of all makes in the field of horse transporters and trailers. Please make an appointment in advance. under Richard Theurer Andreas Theurer

Condition: used, Jowi immersion basin incl. drainage rack, mobile Bljdpfxsw Sdmkj Abzsp

Condition: new, power: 390 kW (530.25 HP), overall weight: 26,000 kg, fuel type: diesel, color: grey, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 6, Equipment: ABS, air conditioning, bathroom, cruise control, differential lock, navigation system, onboard computer, parking heater, trailer coupling, Topsleeper, green emissions sticker (category 4), rear view camera, TV, radio, new general inspection and emissions test (HU/AU), Popout PushUp, diesel, automatic transmission, Euro 6, green emissions sticker, air suspension, trailer hitch, ABS, differential lock, auxiliary heating, cruise control, onboard computer, air conditioning, climate control in pop-up, navigation system, rear-view camera, radio, premium sound system, 6 registered seats, ambient lighting, walk-through to living area, underfloor heating, 6 sleeping berths, topsleeper seating area, 2x TV, refrigerator with freezer compartment, ceramic hob, microwave with grill function, overhead storage cabinets, shower, toilet, washbasin, towel warmer, capacity for 5-6 horses, monitoring camera in horse compartment, windows in horse compartment, stainless steel window bars in horse compartment, rear and side ramps, ramp limiters, stainless steel horse dividers, automatic horse watering, winch, horse shower, exterior washbasin, mobile saddle cabinet with lift system, external tack room, alloy wheels, diesel generator, permissible gross weight 26,000 kg, special approval as of 20.12.2023. Total mileage: 12,100 km. FOR US, CONDITION AND INTUITION ARE DECISIVE; PRICE IS SECONDARY. For further questions, please contact Mr. Faller at the listed number. //*TRADE-IN, PURCHASE OR FINANCING OF YOUR VEHICLE POSSIBLE! All information provided without guarantee* More offers can be found on our homepage. The description and details given do not constitute a binding assurance and are not guaranteed. The only legally binding agreement is the purchase contract concluded at our dealership upon purchase of the vehicle. Errors and interim sales excepted! Bledpfx Abjw Em U Ejzep

Condition: used, mileage: 1,00,000 km, power: 155 kW (210.74 HP), fuel type: diesel, gearing type: automatic, overall weight: 3,500 kg, first registration: 05/2021, emission class: euro6, color: grey, number of seats: 5, Equipment: ABS, air conditioning, navigation system, parking heater, soot filter, Color monitor for navigation system, rear-wheel drive, used vehicle Euro 6 green environmental badge, new model facelift Daily 35-210 panel van with medium wheelbase 3520 mm and high roof, 3.0 l Turbo Diesel with 155 kW, crew cab panel van with 5 seats, conversion with double bed, automatic climate control, auxiliary heater, Hi-Matic 8-speed automatic transmission, tow bar with 3,500 kg towing capacity, rear axle air suspension with lifting and lowering function, navigation, reversing camera, driver and passenger comfort seats with rotating base, rear parking sensors, LED headlights, multifunction steering wheel, cruise control, gross vehicle weight 3,500 kg, partition wall, 2x sleeping berths / beds, cargo area conversion with drawers, toilet, washbasin and instantaneous water heater, electric windows, central locking, 2x airbags, ABS, ASR, German vehicle, 1st owner, original mileage, -- Subject to prior sale and errors -- Sale only to business customers or export -- Vehicle No: 91 Bledpfx Aew Tta Njbzsp

Condition: ready for operation (used), Year of construction: 1994, A Containex shower container including water boiler Austria Email is available. 1) Container Containex 20ft S, year of construction: 1994, length: 20 feet (approx. 6096mm), equipment: shower cubicles, washbasin, urinal, window. 2) Water boiler Austria Email (Havel Therm) VS-300-EU, volume: 300l, operating pressure: 10bar, test pressure: 15bar, max. operating temperature: 95°C, max. heat output: 150kW, heating time 6kW/4kW/3kW: 4h/6h/8h. Suitable for drinking water. Documentation available. On-site inspection is possible. Bledpfxovhc Rpo Abzjp

Condition: as good as new (ex-display), Year of construction: 2025, Ultrasonic washing system - ultrasonic cleaning device chamber made of stainless steel 1.4401 (AISI 316L) - incl. insulated hinged lid - incl. level control /dry run protection - incl. 1 piece stainless steel basket - floor ultrasound, frequency: 25 kHz, power (eff./peak): 600/1.200 Watt - Heating adjustable up to 80°C; power: 2,600 watts - Basket dimensions: LxWxH 320 x 320 x 280h mm - Basin dimensions: LxWxH 420 x 400 x 350h mm Bjdpfx Abslccuzozelp - Outer dimensions: LxWxH 520 x 650 x 850h mm - max. loading weight of the basket: 30 kg - device is mobile

Condition: used, maximum load weight: 6,000 kg, overall weight: 17,000 kg, axle configuration: 2 axles, first registration: 02/2025, Equipment: ABS, STX Living Trailer with Apartment 17T, Double Pop-Out, Pop-Up, 3–4 sleeping berths, fully equipped apartment, seating area, large bathroom with shower, refrigerator, air conditioning, microwave, washbasin, WC, diesel parking heater, Victron charger, and much more. * NET SALE POSSIBLE. * TOP leasing offer available. Location and viewing of our vehicles: STX HORSETRUCKS GERMANY Hamburgerstrasse 65 Bodpfx Absw Rt Tkszelp 23816 Leezen Sales and service for all brands in the field of horse transporters and trailers. Viewings by prior appointment only. Please contact Richard Theurer or Andreas Theurer.

Condition: new, Hebrock Model F 2 next Offer type: New machine, SALE ONLY IN AUSTRIA! Immediately available new machine with special offer price and full manufacturer warranty. Bedpfxol D Rp Eo Abzjlp The 3.3 m long F 2 is not only inexpensive and space-saving. It also has the equipment you need to process perfect edges right from the start: diamond-tipped jointing cutters guarantee excellently prepared workpieces for edging. The equipment includes a jointing unit (up to 2 mm milling depth), the top-mounted fast heating glue container, cross-cut saw and combination router. Optionally, the F 2 can also be equipped with a surface scraper. max. edge thickness: 3 mm max. workpiece thickness: 50 mm Ready for operation in 3.5 min Feed rate approx. 10 m/min Equipment: Edge banding machine F2 next With PLC control (incl. touch screen) Hot melt glue application to the workpiece for edgebanding material up to 3 mm jointing cutter (incl. slide - tool) up to 2 mm milling depth maintenance-free glue basin with change basin pre-equipment incl. glue discharge device HF crosscut saw station (approx. 12000 rpm) HF milling station (approx. 12000 rpm) with separate pneumatic milling adjustment and interchangeable plate milling cutter (combination version) robust chain drive ball bearing mounted double roller top pressure viewing window from rear side of machine extractable workpiece support Including special equipment: F2/12 surface scraper (incl. pneum. lift) F2/30 pneumatic 3-point adjustment (radius- ,chamfer-, flush milling) F2/27 Nesting for milling stations

Condition: not inspected (used), Spark erosion machine Manufacturer: Charmilles Technologies Model: Form 2 – LC Year of manufacture 1992 Generator: 50A Space requirement: 1200 x 1300 x 2200 mm (LxWxH) Weight: 1100kg Work basin: 800 x 480 x 250 mm (LxWxH) Travel paths X/Y/Z: 300 x 200 x 150 mm Electrode weight: max. 60 kg Workpiece weight: max. 500 kg Equipment: - 3-axis digital display Heidenhain VRZ 760 - System 3R clamping device - Machine light - Fire extinguishing device The machine can be demonstrated on site under power. All information without guarantee Bodsvld Iwopfx Abzolp Subject to errors and prior sale

Condition: used, Year of construction: 2021, Used machine Year of manufacture: 2021 Equipment and technical data: Uniform and constant coating across the entire working width thanks to an innovative technical solution and special vibration dampers that compensate for any deviations on non-smooth embossed panels. Coating rollers: with a special coating made of "acid-resistant synthetic rubber" allow various adjustments and therefore a long service life. Homogeneous DOSING of the glue thanks to adjustable distribution trays. Accident-proof PROTECTION DEVICES on all moving elements ensure optimal safety for the operating personnel. ELECTRICAL SYSTEM: perfectly sealed in accordance with European standards, with push-button control panel, 24 V voltage. Technical data: Working width 1300 mm Working height 100 mm Application roller diameter 185 mm Feed speed 18 m/min Drive motor 0.37 kW Working surface height 800 mm Blodpfx Abjwwnfpezep Dimensions: Length 780 mm Width 2000 mm Height 1350 mm Weight 340 kg Incl. basin for collecting the water made of INOX steel Incl. upper and lower glue container made of stainless steel Location: Flörsheim Availability: Immediately

Year of construction: 1989, condition: ready for operation (used), A conical twin-screw extruder Weber for PVC profile extrusion including cooling water basin, pull-out machine and a saw is available. Extrusion capacity: approx. 90kg/h, drive: 30kW, injection height: 100mm, temperature range: 0°C-300°C, motor power: approx. 20kW, controller: Philips Pastomatic, weight: approx. 1000kg. Documentation available. On-site inspection is possible. Bjdpowu E Agofx Abzelp

Condition: as good as new (ex-display), Year of construction: 2025, HD washbasin - HD brush washbasin The washbasin has an adjustable 60 bar high pressure pump with which cleaning takes place in a closed work area. The cleaning takes place with an aqueous degreaser (10kg included in delivery) and at approx. 45 ° C. Viewing window including lighting Medium filtration through a candle filter Comfort operation by means of a foot switch including turntable Technical specifications: Working area: 1,200 x 700 mm Usable height: 400 mm Payload: 50 kg Operating pressure: adjustable up to max. 60 bar Blsdpfxehl If Ns Abzep Pump output: 14 lt / min Washing temperature: adjustable up to max. 45 ° C Tank capacity: 170 lt Heating capacity: 4,000 W. Total output: 8.0 kW Voltage: 400 V ac 1 P + N + PE; Frequency: 50 Hz Machine weight: approx. 180 kg Overall dimensions with the lid open: 1,480 x 991 x 2,080 mm

Condition: good (used), Year of construction: 2009, 11 spindle motors. Glass thickness: 3 to 30 mm. Minimum glass size: 85 x 150 mm. Speed: 0.5 to 5 min. With water basin and pump. Working direction: from right to left. Bledpfx Aevk Ed Rebzep Working height: 780 mm. Total length: 8520 mm. Depth: 1130 mm. Total height: 4850 mm.

Year of construction: 1987, condition: ready for operation (used), A Weber single-screw extruder including an IDE coextruder and a cooling water basin is available. 1) Weber ET 45, year of manufacture: 1970, screw diameter: 45mm. 2) IDE MEB 30-25D, year of manufacture: 1987, drive: 3.8kW, screw speed: 6U-64U/min, screw diameter: 30mm, process length: 25D. On-site inspection is possible. Bledpfjwu E Atox Abzsp

Year of construction: 2025, condition: as good as new (ex-display), HD washbasin - HD brush washbasin The washbasin has an adjustable 60 bar high pressure pump with which cleaning takes place in a closed work area. The cleaning takes place with an aqueous degreaser (10kg included in delivery) and at approx. 45 ° C. Viewing window including lighting Medium filtration through a candle filter Comfort operation by means of a foot switch including turntable Technical specifications: Working area: 1,200 x 700 mm Usable height: 400 mm Payload: 50 kg Operating pressure: adjustable up to max. 60 bar Pump output: 14 lt / min Washing temperature: adjustable up to max. 45 ° C Tank capacity: 170 lt Heating capacity: 4,000 W. Total output: 8.0 kW Bjdpfjhl If Tox Abzolp Voltage: 400 V ac 1 P + N + PE; Frequency: 50 Hz Machine weight: approx. 180 kg Overall dimensions with the lid open: 1,480 x 991 x 2,080 mm

Year of construction: 1968, condition: ready for operation (used), A Weber extruder including cooling water basin is available. Screw diameter: 45mm. Documentation available. On-site inspection is possible. Bljdpfjwu E Amjx Abzep

Condition: as good as new (ex-display), Year of construction: 2025, Ultrasonic washing system - ultrasonic cleaning device chamber made of stainless steel 1.4401 (AISI 316L) Bljdpfxjk Ttkco Abzsp - incl. insulated hinged lid - incl. level control /dry run protection - incl. 1 piece stainless steel basket - floor ultrasound, frequency: 25 kHz, power (eff./peak): 750/1.500 Watt - Heating adjustable up to 80°C; power: 5,000 watts - Basket dimensions: LxWxH 540 x 320 x 280h mm - Basin dimensions: LxWxH 650 x 400 x 350h mm - Outer dimensions: LxWxH 750 x 650 x 850h mm - max. loading weight of the basket: 30 kg - unit is mobile

Year of construction: 2005, condition: ready for operation (used), A robot-based waterjet cutting system without a high-pressure pump is available. 1) Industrial robot ABB IRB 6600 M2004, axes: 6, load capacity: 175kg, reach: approx. 2800mm, repeat accuracy: +/-0.05mm, robot weight: approx. 1750kg. 2) Water basin catcher TF3020, working area X/Y: 3000mm/2000mm, basin dimensions X/Y/Z: approx. 3150mm/2150mm/700mm. 3) High-pressure cutting head, reaction time: 0.1s, operating pressure: 400MPa (4000bar), weight including collimation tube: approx. 1500g. 4) 3D collimation tube extension for pure water operation. 5) 1/4 inch HD filter MF4-56, filter insert: 56µm, connection type: HP4, operating pressure: 450MPa (4500bar). 6) Complete high-pressure piping of the robot. 7) Pneumatic components for controlling the cutting valves and metering slides. 8) High-speed motor. 9) Protective housing for the entire robot system, parapet height: 1090mm, wall thickness: 45mm, sound insulation: approx. 25dB(A), internal dimensions X/Y/Z: approx. 3955mm/3955mm/3470mm, external dimensions X/Y/Z: approx. 4050mm/4050mm/3600mm. Total system dimensions X/Y/Z: approx. 4500mm/4000mm/3700mm, total system weight: approx. 3500kg. Documentation available. On-site inspection is possible. Bedpjwv Ul Tefx Abzjlp

Condition: as good as new (ex-display), Year of construction: 2025, Ultrasonic washing system - ultrasonic cleaning device chamber made of stainless steel 1.4401 (AISI 316L) - incl. insulated hinged lid - incl. level control /dry run protection - incl. 1 piece stainless steel basket - floor ultrasound, frequency: 25 kHz, power (eff./peak): 500/1.000 Watt - Heating adjustable up to 80°C; power: 5,000 watts Blsdpfx Aolcctgebzep - Basket dimensions: LxWxH 520 x 230 x 200h mm - Basin dimensions: LxWxH 600 x 300 x 270h mm - Outer dimensions: LxWxH 680 x 420 x 490h mm - max. loading weight of the basket: 20 kg - device is mobile