Used Beam Planer for sale (5,732)

Condition: used, machine/vehicle number: 007243, Max. machinable height: 120 mm Fgsdoy Nkpbepfx Aa Neb Maximum machinable width: 230 mm Max. forward feed speed: 12 m/min Operator shafts number: 4

Condition: excellent (used), Catalogue number 7981 Fodpfx Aoy Id Twea Negb TECHNICAL DATA - shaft width: 410mm - 3-knife shaft - shaft guard - table length: 2530mm - cast iron tables - both tables adjustable - original angle-adjustable fence - motor: 3.3 kW - brake - dimensions (L/W/H): 2550x850x970mm - weight: 604kg ADVANTAGES – Polish production, ŻEFAM brand – 3-knife shaft – brake – used jointer, in very good condition Net price: 5900 PLN Net price: 1400 EUR depending on 4.2 EUR exchange rate (Prices may change with significant currency fluctuations)

Condition: used, machine/vehicle number: 005456, Max. panel width: 2200 mm Max. panel length: 4500 mm Main saw blade projection: 123 mm No of Rip saw Grippers: 8 No of Cross Cut Grippers: 5 Second flexible pusher: yes Fgjdjwuz Dyjpfx Aa Nob Panel Rotation Station: yes

Condition: used, machine/vehicle number: 005445, Max. panel width: 3200 mm Max. panel length: 2120 mm Main saw blade projection: 165 mm No of Rip saw Grippers: 4 No of Cross Cut Grippers: 9 Panel Rotation Station: yes Thin sheet loading: yes Fgsdpfsiiiuyox Aa Nsb

Condition: used, working width: 410 mm, planing width: 410 mm, working height: 410 mm, total length: 2,590 mm, Planer, planer SAC 410 mm Fsdpswa A R Ejfx Aa Nsgb Specification: • condition - used • working width - 410 mm • length of the tops - 2590 mm • culaga adjustable at an angle • engine power - 4.0 kW • spindle speed - 5000 rpm • manually adjustable planing height • health and safety guard above the shaft • 4-knife shaft with a diameter of 120 mm for traditional knives • start-up 0-1 • output for sawdust extraction - fi 100mm • weight approx. 600 kg • dimensions 259x90x105 cm (length x width x height) Additional information: • acceptable technical condition, after replacing the bearings • the photos shown show the actual condition of the item for sale • possibility of switching on and checking the device on site. • the price given in the auction does not include VAT

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 3,310 h, load capacity: 4,000 kg, lifting height: 4,100 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 2,800 mm, motor manufacturer: KUBOTA V2403-T, gearing type: hydrostat, fork carriage width: 4,000 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200/50-10, rear tire type: cushion tires (black), rear tire size: 27X10-12, overall weight: 10,100 kg, empty load weight: 6,100 kg, total height: 2,400 mm, total length: 2,300 mm, total width: 2,300 mm, color: green, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, 🔶 COMBILIFT C4000 – 2017 – 3310 HOURS – DIESEL – DUPLEX 4100 mm – SPREADER BEAM – CONDITION 5/5 🔶 🏷️ Used and new forklifts with guaranteed quality – FT LOGISTICS ✔️ Ready for operation. No compromises. This COMBILIFT C4000 is not just a machine — it is a guarantee that your logistics will run smoothly, reliably, and without downtime. Designed for demanding working environments and fully serviced both technically and visually, the truck presents itself as new and is ready for immediate use. 📌 Key technical specifications: 📅 Year of manufacture: 2017 ⏱️ Operating hours: 3310 🔥 Drive: Diesel 💪 Lifting capacity: 4000 kg 📏 Mast: Duplex – 4100 mm Fgjdpfjy Rifqjx Aa Neb 🔧 Fork positioner: 1320 mm | Forks: 1200 mm 🟦 Spreader beam: 4000 mm | Forks: 1200 mm 🛞 Tyres: Superelastic (100%) 🛠️ Technical condition: 5/5 – fully serviced, ready for operation 🎨 Visual condition: refurbished, corrosion-free, like new 📐 Dimensions: Height 2400 mm | Length 2300 mm | Width 2300 mm 🏗️ Overall height: 2800 mm 🛞 Tyres: SE – Front 200/50-10 | Rear 27x10-12 📦 Ideal for: 📚 Narrow-aisle warehouses 🪵 Wood, steel, and pipe industry 📏 Handling long loads 🏭 Indoor and outdoor use FT LOGISTICS – Quality you can rely on. Service you can trust.

Condition: excellent (used), functionality: fully functional, Four-side planer Weinig Profimat 22N Working width: 220 mm Working height: 120 mm Fjdpfx Aaoxzbn Nj Negb Number of spindles: 6 Spindle arrangement: Bottom – 4 kW Right Left – 5.5 kW Top – 5.5 kW Bottom – 4 kW Universal – 4 kW Feed speed adjustable via variator: 6–22 m/min Feed motor power: 3 kW Spindles with adjustment

Condition: excellent (used), Weinig 140/4A Four-Side Planer Working width: 140 mm Working height: Number of spindles: 6 Spindle arrangement: Bottom 3 kW Right 2.2 kW Top 3 kW Fsdew Tiyxjpfx Aa Negb Bottom 3 kW Right 4 kW Left 3 kW Feed speed adjustable: First gear 4.3/5.3/14.5/18 m/min Second gear 8.6/10.6/29.0/36.0 m/min Total power: 21 kW

Condition: excellent (used), Four-side planer Weinig Profimat 22N Working width: 220 mm Working height: 120 mm Number of spindles: 4 Spindle arrangement: Bottom 4 kW Right Left 5.5 kW Fsdpfxow E Hcvs Aa Nogb Top 4 kW Feed speed adjustable with variator: 4–20 m/min Total power: 16 kW

Condition: excellent (used), Weinig Unimat 23 four-sided planer Working width 230mm Working height 160mm Number of spindles 5 Arrangement of spindles Bottom 5.5kw Right Left 7.5kw Top 11kw Bottom 5.5kw Pneumatic material presses divided into 4 sections Fodpfxstxxwde Aa Negb Feed speed adjustable by variator 4-24m/min Length of input table 1980mm Drive on cardan shafts Thick soundproof cabin Machine dimensions 380x226x178cmH CE certificate

Condition: used, Year of construction: 1996, functionality: fully functional, planing height: 160 mm, spindle diameter: 40 mm, planing width: 230 mm, height adjustment type: electric, type of input current: three-phase, input voltage: 400 V, table length: 1,970 mm, number of spindles: 5, extraction connection diameter: 140 mm, Equipment: cabin, - German-made - grooved table - year of manufacture: 1996 - feed rollers integrated in the table TECHNICAL SPECIFICATIONS: - planing width: 230 mm - planing height: 160 mm - grooved table - spindle diameter: 40 mm 1st lower spindle: 7.5 kW 2nd right spindle: 7.5 kW 3rd left spindle: 7.5 kW 4th top spindle: 11 kW 5th lower spindle: 7.5 kW - feed speed continuously variable: 6-36 m/min - feed motor power: 5.5 kW - six upper steel feed rollers - two upper rubber feed rollers - three feed rollers integrated into the table - pneumatic feed pressure - pneumatic shoe pressure - spindles with brakes - infeed table length: 1970 mm Fodpfxoy Hq Hno Aa Negb - electric height adjustment - central lubrication (split) - extraction port diameter: 140 mm Machine dimensions: - (length / width / height): 410x200x180 cm - weight approx. 3000 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, operating hours: 5,672 h, load capacity: 3,000 kg, lifting height: 4,100 mm, free lift: 2,000 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 2,900 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 4,000 mm, fork length: 1,200 mm, fork width: 120 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 23X10-12, rear tire type: cushion tires (black), rear tire size: 355X65-15, overall weight: 9,800 kg, empty load weight: 6,800 kg, total height: 2,550 mm, total length: 2,100 mm, total width: 2,300 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, pallet forks, sideshift, 🔶 COMBILIFT C3000XL – 2011 – 5672 HOURS – LPG – DUPLEX 4100 mm – SPREADER BEAM – CONDITION 5/5 🔶 🏷️ Used and new forklifts with guaranteed quality – FT LOGISTICS ✔️ Ready for operation. No compromises. This COMBILIFT C3000XL is not just a machine — it is a guarantee that your logistics will proceed smoothly, reliably, and without interruption. Designed for demanding applications and fully reconditioned both technically and visually, the forklift presents as new and is ready for immediate use. 📌 Key Technical Data: 📅 Year of manufacture: 2011 ⏱️ Operating hours: 5672 🔥 Drive: LPG 💪 Load capacity: 3000 kg 📏 Mast: Duplex – 4100 mm 🔧 Fork positioner: 1340 mm | Forks: 1200 mm 🟦 Spreader beam: 4000 mm | Forks: 1200 mm 🛞 Tyres: Super elastic (100%) 🛠️ Technical condition: 5/5 – fully serviced, ready for operation 🎨 Visual condition: refurbished, corrosion-free, like new 📐 Dimensions: Height 2550 mm | Length 2100 mm | Width 2300 mm 📦 Overall height: 2900 mm 🛞 Tyres: SE – Front 23x10-12 | Rear 355x65-15 Fgodpfxjy Rf Egs Aa Nsb 🏗️ Free lift: 2000 mm 📦 Perfect for: 📚 Narrow aisle warehouses 🪵 Steel, timber and pipe industries 📏 Handling long loads 🏭 Indoor and outdoor operations FT LOGISTICS – Quality you can rely on. Service you can trust.

Condition: used, Year of construction: 2014, Working width 300 mm Working height 200 mm Number of knives 3 St. machine weight ab. 246 kg Fodpoy Nd Uwjfx Aa Negb knife system Tersa Combined planing and thicknessing machine Holzkraft / SCM Minimax type FS 30 Classic for precise planing and thicknessing of solid wood and wood-based materials. The machine combines two processing steps in one compact device and enables precise surfaces and uniform material thicknesses. Ideal for joineries and ambitious woodworkers.

Condition: excellent (used), Year of construction: 1995, Weinig Profimat 23E four side planer - German production - year of production 1995 - right and left spindles with a face milling cutter ensuring parallelism and a right angle of 900 - element width measurement - electronic width adjustment TECHNICAL PARAMETERS: planing width 230 mm planing height 120 mm electronic planing width control 1 lower spindle 4 kW 2 right spindle 4 kW 3 left spindle 4.2 kW (face milling) 4 spindle right 4.2 kW (face milling) 5 upper spindle 7.5 kW element width measurement electric height adjustment of the feed rollers electric height adjustment of the upper spindle spindle diameter 40 mm six top steel rollers yen top roller, rubber one roll in the table top pulling Fgjdpoibq Nijfx Aa Neb pneumatic pressure feed on cardan shafts pre-table length 2470 mm diameter of nozzles 140 mm Machine dimensions 456x240x220 weight 4000 kg

Condition: good (used), Year of construction: 2002, Weinig Unimat 23 EL four side planer - machine in stock - German production - year of production 2002 - DTR TECHNICAL SPECIFICATIONS: - planing width 230 mm - planing height 170 mm - feed adjustable on the inverter 6-26 m / min - spindle diameter 40 mm 1 lower spindle 7.5 kW 2 right spindle 7.5 kW 3 left spindle 7.5 kW 4 upper spindle 7.5 kW 5 lower spindle 7.5 kW 6 upper spindle 7.5 kW - 4 kW feed motor power - feed on cardan shafts - pneumatic pressure - five top steel rollers - four upper rubber rollers - electric height adjustment - diameter of the stub pipe 140 mm - central lubrication - length of the top 1980 mm Machine dimensions: Fsdpshhyr Aefx Aa Njgb - length 520 cm - width 210 cm - height 210 cm - weight 4000 kg

Condition: used, Used machine Equipment and technical data: Fgedpfxey Ih Sqe Aa Neb - Planing width: 510 mm - Planer table length: 2620 mm - Motor – cutter head: 4 HP, 400 V, 50 Hz - Star-delta starting - 2-knife cutter head - Tiltable fence for planing Machine does not have a motor brake and can therefore only be offered for spare parts Availability: short-term Location: 63934 Röllbach

Condition: ready for operation (used), functionality: fully functional, Maximum planing width: 230 mm Maximum planing height: 120 mm Spindle diameter: 40 mm 4 heads plus one universal head Head configuration: Bottom, right, left, top, universal Motor power: 4 kW (bottom), 5.5 kW (right), 4 kW (left), 4 kW (universal) Spindle rotation speed: 6000 RPM Fodpfx Aasy N Rb Rs Negb Table lubrication Electric height adjustment (up/down) Two feed speeds Year of manufacture: 1999 Weight: 2320 kg Voltage: 400 V

Condition: good (used), Year of construction: 1981, pindle configuration: Bottom Right Left Top Fgjdpsy Nmv Defx Aa Neb Bottom Spindle speed: 6000 rpm Working width: 170 mm Working height: 120 mm Jointing table length: 2 m Equipped with Waxilit pump Infinitely variable feed speed: 7–18 m/min Side pressure roller Motorized pressure beam adjustment Equipped with 5 cutter heads (3 pcs L180 mm, 2 pcs L130 mm) Machine documentation available

Condition: used, Colour: Grey Fensterpresse Orma Max. 4000x2700mm 380V, 2,2kW - Documentation available: No - CE certificate present: No Fgedpfx Aex Svw Nea Neb - Max. workpiece width [mm]: 4000 - Max. workpiece height [mm]: 2700 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2021, total width: 2,200 mm, total height: 1,900 mm, Empty weight: 12.000 kg Dimensions (LxBxH): 710 x 220 x 190 cm - Year: 2021 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: 2010016 - Number of spindles [pcs.]: 9 - └ Spindle 1: - - Spindle type: Bottom - - Motor power [kW]: 11 - - Spindle diameter [mm]: 50 - - Cutterhead speed [rpm]: 6000 - - Tool present: Yes - └ Spindle 2: - - Spindle type: Right - - Motor power [kW]: 11 - - Spindle diameter [mm]: 50 - - Cutterhead speed [rpm]: 6000 - - Tool present: Yes - └ Spindle 3: - - Spindle type: Left - - Motor power [kW]: 11 - - Spindle diameter [mm]: 50 - - Cutterhead speed [rpm]: 6000 - - Tool present: Yes - └ Spindle 4: - - Spindle type: Top - - Motor power [kW]: 15 - - Spindle diameter [mm]: 50 - - Cutterhead speed [rpm]: 6000 - - Tool present: Yes - └ Spindle 5: - - Spindle type: Right - - Motor power [kW]: 11 - - Spindle diameter [mm]: 50 - - Cutterhead speed [rpm]: 6000 - - Tool present: Yes - └ Spindle 6: - - Spindle type: Left - - Motor power [kW]: 11 - - Spindle diameter [mm]: 50 - - Cutterhead speed [rpm]: 6000 - - Tool present: Yes - └ Spindle 7: - - Spindle type: Top - - Motor power [kW]: 11 - - Spindle diameter [mm]: 50 - - Cutterhead speed [rpm]: 6000 - └ Spindle 8: - - Spindle type: Bottom - - Motor power [kW]: 15 - - Spindle diameter [mm]: 50 - - Cutterhead speed [rpm]: 6000 - - Tool present: Yes - └ Spindle 9: - - Spindle type: Universal - - Motor power [kW]: 11 - - Spindle diameter [mm]: 50 - - Cutterhead speed [rpm]: 6000 - - Tool present: Yes - Min. planing width [mm]: 20 - Max. planing width [mm]: 300 - Min. planing height [mm]: 10 - Max. planing height [mm]: 200 - Feed speed: Automatic - └ Min. feed speed [m/min]: 6 - └ Max. feed speed [m/min]: 36 - Transport dimensions: 7100mm x 2200mm x 1900mm (l x w x h) - Transport weight [kg]: 12000kg - Transport packages [pcs.]: 1 Financial information Fgedpfxexiw Hqo Aa Nob VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 3,310 h, load capacity: 4,000 kg, lifting height: 4,100 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 2,800 mm, motor manufacturer: KUBOTA V2403-T, gearing type: hydrostat, fork carriage width: 4,000 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200/50-10, rear tire type: cushion tires (black), rear tire size: 27X10-12, overall weight: 10,100 kg, empty load weight: 6,100 kg, total height: 2,400 mm, total length: 2,300 mm, total width: 2,300 mm, color: green, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, 🔶 COMBILIFT C4000 – 2017 – 3310 HOURS – DIESEL – DUPLEX 4100 mm – SPREADER BEAM – CONDITION 5/5 🔶 🏷️ Used and new forklifts with guaranteed quality – FT LOGISTICS ✔️ Ready for operation. No compromises. This COMBILIFT C4000 is not just a machine — it is a guarantee that your logistics will run smoothly, reliably, and without downtime. Designed for demanding working environments and fully serviced both technically and visually, the truck presents itself as new and is ready for immediate use. 📌 Key technical specifications: 📅 Year of manufacture: 2017 ⏱️ Operating hours: 3310 🔥 Drive: Diesel 💪 Lifting capacity: 4000 kg 📏 Mast: Duplex – 4100 mm Fedpfxey Ncyxj Aa Njgb 🔧 Fork positioner: 1320 mm | Forks: 1200 mm 🟦 Spreader beam: 4000 mm | Forks: 1200 mm 🛞 Tyres: Superelastic (100%) 🛠️ Technical condition: 5/5 – fully serviced, ready for operation 🎨 Visual condition: refurbished, corrosion-free, like new 📐 Dimensions: Height 2400 mm | Length 2300 mm | Width 2300 mm 🏗️ Overall height: 2800 mm 🛞 Tyres: SE – Front 200/50-10 | Rear 27x10-12 📦 Ideal for: 📚 Narrow-aisle warehouses 🪵 Wood, steel, and pipe industry 📏 Handling long loads 🏭 Indoor and outdoor use FT LOGISTICS – Quality you can rely on. Service you can trust.

Condition: used, total width: 1,200 mm, total height: 1,300 mm, Colour: Green Weight: 750 kg Dimensions (LxBxH): 265 x 120 x 130 cm - Documentation available: No - CE certificate present: No - Max. planing width [mm]: 500 - Max. planing depth [mm]: 20 - Infeed table length [mm]: 1430 - Outfeed table length [mm]: 1130 - Total table length [mm]: 2630 - Cutter block diameter [mm]: 1200 - Number of knives [pcs]: 4 - Diameter extraction nozzle [mm]: 150 - Height adjustment: Manual - Voltage [V]: 400 Fgjdpfx Asy Ncfzoa Nsb - Fuse [A]: 32 - Transport dimensions: 2650mm x 1200mm x 1300mm (l x w x h) - Transport weight [kg]: 750kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1968, Used machine Year of manufacture: 1968 Features and technical data: Planing width: 630 mm Planing height: 220 mm Speed of 4-knife cutterhead: 5,500 rpm Motor power: 6 HP Fgodpfxoy Ih Sws Aa Njb Feed rate: 7/14 and 9/18 m/min Weight: 1,150 kg Due to the missing motor brake, the machine can only be sold as a parts donor! Availability: short notice Location: 63934 Röllbach

Condition: used, Year of construction: 1993, Working width: 500 mm Cutter block: Leitz - Centrofix Number of knives: 4 Surfacing table length: 2800 mm Surfacing table adjustment: Lever Chip removal display: Scale Fodpfjyhgiaox Aa Negb Adjustable fence angle: Yes Motor power: 5.5 kW Machine length: 2800 mm Machine width: 1000 mm Weight: 900 kg

Condition: used, Year of construction: 1992, Working width: 530 mm Planer shaft: Leitz - Centrofix Number of knives: 4 Surface table length: 2900 mm Surface table adjustment: lever Chip removal display: scale Adjustable fence angle: yes Motor power: 4 kW Fodsug Tytspfx Aa Njgb Machine length: 2800 mm Machine width: 1000 mm Weight: 800 kg