Used Bearing for sale (2,941)

Condition: used, Year of construction: 2023, CNC Lathe Manufacturer: SMEC Model: SL 2000 SY Year of manufacture: 2023 Control system: SIEMENS SINUMERIK 828D Technical details: Control system: SIEMENS SINUMERIK 828D Swing over bed: 650 mm Swing over cross slide: 540 mm Max. turning diameter: 395 mm Pjdozzrhyspfx Airorc Bar capacity: 67 mm X-axis: 235 mm Y-axis: 105 (±52.5) mm Z-axis: 580 mm Feed rate (X / Y / Z): 24/10/24 m/min Main spindle: Spindle speed: 4,500 rpm Torque: 169.8/89.2 Nm Spindle nose: A2-6 Spindle bore: 76 mm Spindle bearing diameter: 110 mm Drive power - main spindle: 20/10.5 kW Sub-spindle: Spindle speed: 6,000 rpm Torque: 45 Nm Spindle nose: A2-5 Spindle bore: 45 mm Spindle bearing diameter: 90 mm Drive power - sub-spindle: 7.8 kW Tool turret: Number of tool stations: 12 pos. Shank size for square tools: 25 x 25 mm Shank diameter for boring bars: 40 mm Tool interface: BMT 55 Torque of driven tools (max./constant): 44.4/23.4 Nm Total power requirement: 49 kVA Machine dimensions approx.: 4,130 x 1,752 x 2,085 mm Machine weight approx.: 4,200 kg Additional information In our assessment, the machine is in mint condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if noted in the additional information. Subject to technical changes, errors, and prior sale.

Condition: new, a selection of 80 bearings for sale bearings 60.., 62.., 63.. Prjdezhv I Djpfx Airjc NU 3.., NU 2.. and NU 22.. see the list for details.

Condition: excellent (used), Year of construction: 2013, operating hours: 19,000 h, DOOSAN PUMA GT2100M – CNC Turning and Milling Center Year of manufacture: 2013 Manufacturer: DOOSAN Model: PUMA GT2100M Machine type: CNC turning center with driven tools Condition: Very good condition Technical data Machining capacity * Turning diameter over bed: 600 mm * Turning diameter over slide: 390 mm * Recommended turning diameter: 210 mm * Maximum turning diameter: 300 mm * Maximum turning length: 513 mm * Maximum bar diameter: 65 mm * Chuck size: 8 inches Main spindle * Maximum spindle speed: 4,500 rpm * Spindle nose: ASA A2#6 * Spindle bearing diameter (front): 110 mm * Spindle bore: 76 mm * C-axis, minimum indexing angle: 0.001° Tool turret * Number of tool stations: 12 * Driven tools available * Maximum speed of driven tools: 5,000 rpm * External tool size: 25 mm * Maximum drilling bar diameter: 40 mm * Turret indexing time: 0.3 seconds Axes and travels Pjdpfxs Af Ut Ne Airjrc * X-axis travel: 230 mm (80 + 150 mm) * Z-axis travel: 580 mm * Rapid traverse X-axis: 24 m/min * Rapid traverse Z-axis: 30 m/min Tailstock * Quill diameter: 80 mm * Quill taper: MT4 * Quill travel: 80 mm Electrical data * Electrical connection power: 21.80 kVA Machine dimensions and weight * Length: 2,834 mm * Width: 1,628 mm * Height: 1,700 mm * Machine weight: approx. 3,600 kg Equipment and special features * CNC turning and milling center * Driven tools * C-axis * 12-position tool turret * Tailstock

Year of construction: 2008, condition: used, New: No Year of construction: 2008 Prsdpfx Aoywtzpeirjc Power: 1900 kW (2583 HP) Dimensions (LxBxH): 401 x 140 x 211 cm VAT/margin: VAT qualifying

Condition: excellent (used), Ball bearings, roller bearings, axial cylindrical roller bearings, cylindrical roller bearings -Manufacturer: NSK, cylindrical roller bearing inner ring unused -Type: NNU4960 03DR -Outer diameter: 335 mm -Inner diameter: 300 mm -Width: 120 mm -Quantity: 2x inner ring available Prodpfozbrltox Airjc Price: per piece -Dimensions: Ø 335 x 120 mm -Weight: 16.2 kg/pc.

Condition: excellent (used), Rolling bearings, ball bearings, SKF bearings, SKF, self-aligning bearings, roller bearings, needle bearings, axial cylindrical roller bearings, shaft washer, axial needle roller cage, cylindrical roller cage -Manufacturer: INA, Axial cylindrical roller bearings, axial needle roller bearings, 5 pcs., unused, original packaging -Type: AXK 150190 A -Outer diameter: 190 mm -Inner diameter: 150 mm Psdpfx Aiev Sprnsrjrc -Dimensions: Ø 190 x 5 mm -Price per pack of 5 pieces: 200 euros -Stock: 4 package units and 2 individual items -Weight: 0.2 kg/piece

Condition: used, Year of construction: 2015, power: 90 kW (122.37 HP), nominal power: 90 kW (122.37 HP), rotational speed (min.): 1,480 rpm, rotational speed (max.): 1,480 rpm, input voltage: 400 V, input frequency: 50 Hz, input current: 156 A, type of input current: three-phase, overall weight: 692 kg, total length: 1,035 mm, total width: 557 mm, total height: 695 mm, torque: 580 Nm, type of cooling: air, protection type (IP code): IP55, No. 10040 Three-phase motor Simotop / Techtop T3CR 280M-4 / 90 kW / 1480 rpm Unused, year of construction 2015, in new condition Three-phase asynchronous motor Output 90 kW at 50 Hz 4-pole, speed 1480 rpm Voltage Δ/Y 380/660 V or 420/720 V at 50 Hz Rated current 156.1/89.9 A or 141.3/82.4 A Power factor cos φ 0.92 Rated torque approx. 580 Nm Can be operated in delta on a 400 V supply, therefore suitable for star-delta starting Also suitable for 60 Hz 90 kW at 400/690 V and 1770 rpm 108 kW at 480/830 V and 1780 rpm Efficiency class IE3, efficiency 95.2% Prodo Afbxgspfx Airjc Protection class IP55 Insulation class F Duty type S1 continuous operation Cooling method IC411, totally enclosed fan-cooled (TEFC) PTC thermistors for winding protection IEC standard motor, frame size 280M, shaft height 280 mm Mounting type IM B3, foot-mounted with bolted-on feet Foot hole spacing 457 x 419 mm, 4 holes Ø 24 mm Shaft end Ø 75 x 140 mm with 20 mm key Grey cast iron housing, colour RAL 7024 graphite grey Ball bearings SKF 6316 ZZ C3 on both ends Terminal box on top, cable entries 2x M50x1.5 and 1x M16x1.5 Motor dimensions approx. 1035 x 557 x 695 mm LWH Transport dimensions approx. 1200 x 800 x 900 mm LWH Weight approx. 692 kg Sale on behalf of customer, ex location near 69123 Heidelberg, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex location

Condition: good (used), bridge crane, hall crane, assembly crane, flange hub, bearing cover -Bearing cover: Type 260x150x54 Pedpfx Aiev Il Iqjrsrc .: 1031 4155 -Number: 6x bearing caps available -Price: per piece -Dimensions: Ø 260 x 55 mm -Weight: 7.4 kg/piece

Condition: good (used), Rope protection cage, for rope pulley, steel rope pulley, rope deflection pulley, crane rope, four-rope orange peel grapple, polyp grapple, mechanical orange peel grapple, shell grapple, ship unloading grapple, scrap grapple, garbage grapple, rope grapple, bridge crane, hall crane, assembly crane, flange hub, bearing cover -Bearing cover: Type 220x115x42 -Bolt circle: Ø 180 x 13 mm Psdev Imahepfx Airerc -Number: 8x bearing caps available -Price: per piece -Dimensions: Ø 220 x 42 mm -Weight: 5.7 kg/piece

Condition: used, Year of construction: 1988, Deckel FP4MA 2204 – CNC Machining Center - General overhaul in 2022 - Heidenain TNC320 CNC control - CNC or manual control possible - Movable vertical milling head with retractable spindle - Counter bearing for long milling arbors - Hydraulic tool clamping - Automatic gearbox - Automatic clamping in the X, Y, and Z axes - Automatic central lubrication - Coolant system - Direct path measurement - Collision protection coupling in the Y and Z axes - Year of manufacture: 1988 - Includes tool holders, drilling/milling tools, and tool cart Specifications Working area: - X-axis (longitudinal): 485 mm - Y-axis (transverse): 385 mm - Z-axis (vertical): 380 mm - Quill stroke (vertical): 80 mm - Vertical milling head manually adjustable on spindle head: 150 mm Main drive: - Pole-changing three-phase brake motor: Gearbox with right/left rotation - Power: 3.7 / 4.4 kW - Spindle speed: 63 - 3150 rpm (18 steps) - Step jump: 1.25 - Tool holder: SK40 (M16) - Tool clamping: Disc spring pack - Tool release: hydraulic Feed drive: - X-axis: 1 DC motor - Y & Z axis: 1 DC motor - Ball screws: all axes - Feed rate: 2 - 3000 mm/min (programmable) - Rapid traverse X/Y/Z axis: 3000 mm/min Table carriage: - Number of T-slots: 4 - T-slot width: 14H7 mm - T-slot spacing: 63 mm - Permissible load: approx. 600 kg Installation: - Space requirement (with safety area): approx. 2300 x 2500 mm Podpfxs Adr R De Airjrc - Machine weight including vertical milling head and rotary table: approx. 1830 kg - Operating voltage: 400 V - Total connection value: 12.5 kVA - Floor load: 3000 kg/m²

Condition: excellent (used), Rolling bearings, ball bearings, SKF bearings, SKF, self-aligning bearings, roller bearings, needle bearings, axial cylindrical roller bearings, shaft washer, axial needle roller and cage assembly, cylindrical roller and cage assembly, cylindrical roller bearings -Manufacturer: INA, needle bearing with inner ring unused OVP -Type: RNA/NA 4824 -Outer diameter: 150 mm -Inner diameter: 120 mm -Number: 6 needle bearings available -Price: per piece -Bearing dimensions: Ø 150 x 30 mm Pjdpfx Aisv Spwqorerc -Weight: 1.2 kg/piece

Condition: reconditioned (used), operating hours: 267 h, functionality: fully functional, empty load weight: 520 kg, HAKO JONAS 980 E SWEEPER NEW 6V 250Ah GEL BATTERIES (SIAP) (4x) NEW NEOS 24V 30A BATTERY CHARGER NEW AIR FILTER Machine operating hours: 267 A new anti-static cylindrical brush, combined with a new anti-static side brush (mixed-bristle), ensures excellent sweeping results. A high-efficiency dust suction turbine and new sealing flaps around the main brush prevent fine dust and particles from becoming airborne during sweeping. The machine is equipped with a large-debris flap for collecting bulkier waste. The unit has undergone a comprehensive, meticulous overhaul; all operating fluids and components—such as bearings, drive belts, and sealing flaps—have been replaced with new parts. Each machine we offer is photographed individually; you are purchasing the exact unit shown. TECHNICAL SPECIFICATIONS: Model: Jonas 980 E Sweeping width (mm): 700 Sweeping width with one side brush (mm): 950 Coverage with one side brush (m²/h): 5,700 Sweeping speed (km/h): 6 Hopper capacity (l): 60 (2x30) Filter surface area (m²): 3 Dimensions (L x W x H) (mm): 1500 x 1000 x 1330 Weight (ready for operation) (kg): ~ 520 INCLUDED: NEW 6V 250Ah GEL BATTERIES (SIAP) (4x) NEW NEOS 24V 30A BATTERY CHARGER NEW AIR FILTER NEW anti-static cylindrical brush – mixed bristles NEW anti-static side brush – mixed bristles NEW rubber skirts for the cylindrical brush Waste hoppers: 60 l (2x30 l) KEY FEATURES: The ergonomically designed cockpit and centrally positioned operator seat ensure excellent visibility of the area being cleaned. The Jonas 980 E sweeper is an ideal machine for efficient and cost-effective sweeping of multi-level parking facilities, warehouses, production buildings, and outdoor areas. Battery-powered operation offers high flexibility, allowing for use in enclosed spaces as well. buildings, warehouse facilities Prodpfs Afuvfox Airjc Large working width (950 mm) ensures high area coverage Highly legible and intuitively operated control panel.

Condition: used, Year of construction: 2000, functionality: fully functional, Monforts RNC 200 turning center with Siemens Sinumerik 810D control, ø 300 mm swing over bed and 6,000 rpm direct-drive spindle delivering 9 / 13 kW. A very sturdy and durable machine with a hydrostatic Z-axis (wear-free), fully functional, equipped with a 12-station Sauter electric disc turret (VDI 30) and tailstock with MK4 quill. CNC CONTROL Controller: Siemens Sinumerik 810D CAPACITY Number of controlled axes: 2 (X/Z) X-axis travel mm: 175 Z-axis travel mm: 300 Swing over bed mm: ø 300 Swing over cross-slide mm: 190 Spindle bore / bar capacity mm: ø 42 Feed force long. / cross N: 3.600 / 3.600 Rapid traverse m/min: X/Z: 24 TURRET / TOOL SYSTEM Number of turrets: 1 Tool positions per turret: 12 Tool holder type (VDI / BMT / others): VDI 30 (DIN 69880) MAIN SPINDLE Max. spindle speed rpm: 6.000 Spindle power kW (S1/S6): 9 / 13 Spindle torque Nm: 57 / 83 Spindle diameter at front bearing mm: 80 COOLING Prsdpfe Adzqgjx Airec Coolant tank capacity liters: 130 TAILSTOCK Tailstock quill diameter mm: 70 Tailstock taper: MK4 Tailstock thrust N: 8.800 EQUIPMENT & OPTIONS • Direct-drive main spindle, 9 kW (100% ED) / 13 kW (40% ED), up to 6,000 rpm • 12-station Sauter electric disc turret, VDI 30 (DIN 69880), no driven tools

Condition: used, Radial fan, fan, blower, control cabinet fan Psdpj Agw Enofx Airjrc Control cabinet fan, radial module with support spider EBM PAPST Type K3G450-AZ30-61 Year of manufacture: 2015 Motor: M3G150-IF Design: Radial Air flow rate: max. 8040 m³/h Pressure increase: 1492 Pa Fan: Ø 450 mm Number of blades: 7 Power connection: 3~ 380-480 VAC 50 / 60 Hz Nominal speed: 2750 rpm Power: 5370 Watts at 400 VAC Rated current: 8.3 A at 400 VAC Efficiency: 64.9 % Efficiency grade N: 67.7 External mounting frame: 550 x 550 mm Operating mode: Continuous operation (S1) Bearings: Maintenance-free ball bearings Protection class: IP55 Insulation class: F Compliance with standards: EN 61800-5-1; CE Approvals: CSA C22.2 No. 77 + CAN/CSA-E60730-1; UL 1004-7 + 60730-1; EAC Technical features: - Output 10 VDC, max. 10 mA - Output 20 VDC, max. 50 mA - Output for slave 0-10 V - Input for sensor 0-10 V or 4-20 mA - External 24 V input (parameterization) - External enable input - Fault alarm relay - Integrated PID controller - Motor current limitation - PFC, passive - RS485 MODBUS-RTU - Soft start - EEPROM write cycles max. 100,000 - Control input 0-10 VDC / PWM - Control interface with safety-isolated SELV potential - Over-temperature protection, electronics / motor - Under-voltage / phase failure detection Dimensions W x H x D: 550 x 550 x 480 mm Weight: 54 kg Very good condition - from a test setup

Condition: excellent (used), Ball bearings, roller bearings, axial cylindrical roller bearings, cylindrical roller bearings -Manufacturer: NSK, cylindrical roller bearing, double row, unused -Type: NNU4976 E1 -Outer diameter: 520 mm -Inner diameter: 422 mm -Width: 140 mm -Number: 3x cylindrical roller bearings available -Price: per piece -Dimensions: Ø 520 x 140 mm -Weight: 60 kg/piece Podpfx Aiew A Nm Ssrjrc

Condition: good (used), Year of construction: 2006, Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 mm Swing diameter over face slide: 260 mm Face slide travel: 380 mm Main drive Drive power AC motor - 40/60/100% duty cycle: 33/27/22 kW Spindle box Spindle bore diameter: 106 mm Spindle diameter in front bearing: 140 mm Speed range (V constant): 1 - 2,000 rpm Cross slide Feed range, face: 0.001 - 1,000 mm/rev Feed range, face, optional up to: 5,000 mm/rev Feed range, longitudinal and thread pitch: 0.001 - 2,000 mm/rev Feed range longitudinal and thread pitch, optional up to: 13,000 mm/rev Feed force flat: 9,000 N Feed force longitudinal: 12,000 N Automatic tool turret Number of tool stations: 12 With tool drive for 6 stations Tool holder system (DIN69880) VDI40 Equipment SIMENS SINUMERIK 840D sl (Shop Turn with manual functions) COMBI control station C-axis with drilling, milling, and engraving cycles Psdpfx Ae Ad Izljirerc Residual material detection and machining – during roughing and contour pockets MULTIFIX C forne setup Three-jaw chuck SMW AUTOBLOK: HI-GRIP HGF260-81-3 Oil emulsion mist filter for work area extraction: MAHLE LTA600

Condition: excellent (used), Ball bearings, roller bearings, axial cylindrical roller bearings, cylindrical roller bearings -Manufacturer: INA, cylindrical roller bearing. SL04 5020PP, unused, original packaging -Type: INA SL045020-D-PP -Item no.: 1031 4147 MOuter diameter: 150 mm Predpfx Aiov Rw Syorjc -Inner diameter: 100 mm -Width: 67 mm -Number: 6x cylindrical roller bearings available -Price: per piece -Dimensions box: 160/160/H70 mm -Weight: 3.8 kg/piece

Condition: reconditioned (used), Year of construction: 2010, • Traveling distances X=3100 mm, Y=1950 mm, Z=1390 mm • Heidenhain iTNC 530 with handwheel HR 410 • Machine table for multi side working 3000 mm x 1600 mm • 2-axis NC-universal milling head, for simultaneous and positioning working • Spindel 10.000 U/min HSK 100, 130 Nm Spindle torque • Tool change system HSK 100 / 40 places for 750 mm long tools • Chip conveyor (screw type) in X-axis, for transport into • Chip conveyor scraper belt type (traverse conveyor), Fabr. Knoll Predpfjz Ipl Hex Airec • Coolant container 900 l, Fabr. Knoll • Outside air at spindle • IKZ 60 bar for deep hole drilling function • Covering with safety glass pane, open at the top for loading by crane • 2 part sliding doors at the operator side • 2 part sliding doors at the front side, for easy loading • Radio-controlled measuring probe RMP 60 • incl. washing gun • incl. podiums at the front side and operator side • complete factory overhauled and painted new • short time delivery after arrangement • used machine • Y-axis ball screw in September 2021 incl. bearings renewed • X-axis new linear guiding system, July 2023 changed, renewed • Spindle overhauled at Mai 2023 (clamping system new, clamping cartridge new, rotation unit new, general tests) (at 23105 spindle hours)) • can be visited under power at 72793 Pfullingen • optional fixators • optional installation at customers plant • optional transport • 23122 spindle hours in total • 53991 machine hours in total • Year of construction 2010 Subject to prior sale

Condition: used, Year of construction: 2007, Tenoning spindle 1 St. Number of milling agregates 5 St. Spindle diameter 50 mm Control Weinig PC-Nexus Weinig Unicontrol 11 NC window production system with an extensive set of tooling ----- INCLUDES: - Weinig Univar 6 rebating/profiling machine - Tooling for both the Unicontrol 11 and Univar 6 The machines can be viewed in operation until the end of calendar week 46, 2026. Dismantling and loading must take place during calendar week 47, 2026. (Note: If the buyer is unable to collect the equipment during week 47, temporary storage at our facility can be arranged.) OPTIONAL (for an additional charge): Professional dismantling and loading of the machines onto the customer's trucks: 4,500.00 EUR Manufacturer's technical specifications: ----- Item 1: Weinig Unicontrol 11 window production system (built 2007) ----- Includes existing tooling for: - IV 67 (timber and timber-aluminum) - IV 77 (timber and timber-aluminum) - IV 90 (timber) Cross-cut saw: ----- Equipped with a laser alignment light; motor power 3 kW; spindle diameter 40 mm; spindle speed electronically adjustable (3,000–6,000 rpm) with integrated brake. Maximum tool cutting circle: 400 mm Axial adjustment: 150 mm via NC axis Radial adjustment: pneumatic, with 8 positions for top-side edge rounding Horizontal rounding unit (bottom): ----- Motor with brake: 1.5 kW, spindle diameter 20 mm, clamping length 25 mm, rotational speed 9,000 rpm Maximum tool cutting circle: 130 mm Axial adjustment: mechanically coupled to the cross-cut saw Radial adjustment: pneumatically controlled Tenoning and slotting spindle: ----- Includes hydraulically clamped outboard bearing Motor power (with brake): 15 kW Spindle diameter: 50 mm Spindle speed: 2,800 rpm Maximum tool cutting circle: 400 mm Prjdpfx Aie Afzv Sorjc Tool clamping length: 640 mm Axial adjustment: via NC axis Base position (below table): 5–10 mm Radial adjustment: fixed 1st profiling spindle (climb and conventional milling): ----- Motor power (with brake): 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool cutting circle: min. 140 mm, max. 232 mm Tool clamping length: 400 mm (with outboard bearing) Axial adjustment: 350 mm via NC axis Radial adjustment: via NC axis Base position (below table): 5–10 mm 2 feed rollers opposite the spindle; axial position pneumatically controlled (8 positions) Horizontal profiling unit (top): ----- Motor power (with brake): 3.7 kW Spindle diameter: 40 mm Clamping length: 40 mm Spindle speed 9,000 rpm Maximum tool cutting circle: 130 mm Pneumatic adjustment to 8 positions (axial and radial) 2nd Profile Spindle: ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool cutting circle: min. 140 mm, max. 232 mm Tool clamping length: 400 mm (with outboard bearing) Axial adjustment range: 350 mm (NC-controlled axis) Radial adjustment range: NC-controlled axis Base position (below table): 5–10 mm Cyclic guide fence with support rail for muntins/ba...

Condition: excellent (used), Rolling bearings, ball bearings, SKF bearings, SKF, self-aligning bearings, roller bearings, needle bearings, axial cylindrical roller bearings, housing washer -Manufacturer: INA, bearing washer for axial cylindrical roller bearings 5 pcs. unused OVP -Type: GS 811 30 .: Carton: with 5 pieces of bearing washers -Quantity: 6x box available -Price/Sale: per carton -Dimensions box: 200/200/H50 mm Prjdpjv R U Eqsfx Airoc -Weight: 3.8 kg/piece

Year of construction: 2012, condition: new, TIMKEN TAPERED ROLLER BEARINGS NP342204-90WA2 NEW NEVER USED 14 UNITS AVAILABLE WEIGHT 320 KG/ EACH PACKED INTO ORIGINAL WOODEN BOX WAREHOUSE LIQUIDATION ADDITIONAL BEARINGS AVAILABLE: 22324 EDK FAG x2 un. 71976MP.P5.UO FAG x1 23276 BMB FAG x2 23222-E1-A-K-M FAG x1 23224 HL BM S x1 F36204 FAG x3 STF374KV5051GAS3 NSK x3 2456 CPM ITALY x47 NP838887 TIMKEN x2255 R425-1G4S7 NSK x2 2TR19H C3 FP KOYO x1 31318F FERSA x165 NP942053-902-A1 TIMKEN x12 2TR19H C3 FP KOYO x1 24168-B-C3 FAG x 2 01/02/0274/C5309 x2 NNU6810 NTN x3 612833-B SKF x6 CP354256-90001 TIMKEN x2 NU2324 EC ML SKF x1 Prsdpfxoqpd Sns Airec 23238C E4 S11 NSK x4 2IE.083.00 x2 SL182244-BR-A INA x1 23088-K.MB.R1000.1130.J15B FAG x2 612833-B SKF x6 PRICE FOR NEGOTIATIONS

Condition: used, Tapered roller bearings Pjdpfx Aerfzttjirjrc -Condition: New -Manufacturer: Timken, tapered roller bearing type HH421246 C -Bore: Ø 98.42 mm -Dimensions: Ø 170 x 65 mm -Weight: 4.9kg

Condition: used, Year of construction: 2018, operating hours: 7,490 h, functionality: fully functional, machine/vehicle number: Robot: 4600-107494 / Controller: 4600-107494, overall weight: 538 kg, load capacity: 40 kg, arm reach: 2,550 mm, ABB industrial robot with IRB 4600 manipulator (variant: IRB 4600-40/2.55 Type C) and IRC5 Single controller for industrial automation applications. Condition: used and tested. Typical applications include handling, assembly, machining, and general automation. Payload: 40 kg with a reach of 2550 mm. Year of manufacture: 2018. Operating hours: 7490. Software: RobotWare RW 6.07.01.00. Equipped with an ABB FlexPendant programming device, connection cable set, and a Foundry Plus protective version with a label bearing the inscription “Foundry Plus”. Pjdpfezamf Sox Airerc

Condition: excellent (used), Year of construction: 2013, For sale: a complete travelling crane with an electric chain hoist from the renowned Stahl brand, with a lifting capacity of 1000 kg. The set was manufactured in 2013. The set is fully functional and ready for further operation. ✅ Technical specifications: * Year of manufacture: 2013 * Lifting capacity: 1000 kg (1 ton) * Hoist: STAHL ST2010 – a robust, reliable unit * Drive type: electric, chain * Total length of the crane: 1046 cm (10.46 m) * Stable load-bearing beam + cable and power supply guides Prsdpfez Sk S Eex Airjc * Can be inspected on site – it was used in a clean production hall The crane is in very good technical condition – well-maintained and ready for use. Ideal for a workshop, industrial plant, warehouse, or tool shop.

Year of construction: 2018, condition: used, For sale is a fully functional used screw conveyor with a screw diameter of 50 cm. The device has operated for several months in a line feeding vegetables to a peeler. SCREW CONVEYOR Type PSL.U500/1.8 Psdpjxnrr Sjfx Airerc • Device intended for feeding vegetables into the peeler infeed hopper • Infeed hopper adapted for manual feeding, H=800 mm • U-section trough, 500 mm; Length approx. 2700 mm • Discharge height to peeler infeed approx. 1800 mm • Cleaning port in the lower part of the trough; Operating angle approx. 45° • Bearings mounted outside the working section; Lower shaft sealing with packing • Structure mounted on adjustable feet and wheels • Feeding speed adjustable by frequency inverter, external potentiometer on the control panel • Acid-resistant (stainless steel) control panel mounted according to arrangement • Electrical supply: Power 2.2 kW, ~3x380 VAC, 50Hz