Used Bearing for sale (2,984)

Condition: used, functionality: fully functional, Year of construction: 1997, machine/vehicle number: 9730010, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 3, roller (top) diameter: 340 mm, side roll diameter: 300 mm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 25 mm, sheet thickness brass (max.): 25 mm, sheet thickness copper (max.): 25 mm, overall weight: 9,000 kg, total length: 5,500 mm, total width: 1,600 mm, total height: 1,500 mm, input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, 3-roll hydraulic plate bending machine with pre-pinch Model MCO3034 Davi capacity 3000x20 mm -Plate width 3000 mm -Capacity rolling 20 mm -Prebend 16 mm ----- TECHNICAL DATA Top roll 340 mm Surface on the rolls 3050 mm MINIMUM ROLLING DIAMETER ID 430 MM depending on plate thickness and plate yield strength CONFIGURATION: -Rolls hardened high strength surface -Conical plate bending attachment hydraulic -Digital position readouts 2xplate support left and right side hydraulic ( see photo ) -3 rolls driven hydraulic powered with individual motor & gear box on each roll. -Parallelism between top and bottom rollers by torsion bar. -Rolls installed on bearings -Overload safety hydraulic protection of the rolls -Synchronized speed hydraulic rotation of the rolls. -Hydraulic unit self enclosed into the machine. -Speed infinitely variable control with leverage hydraulic distributor -Centralized operator control panel hinged on the front floating left right -Emergency shutdown and safety stop system -Manuals original Psdpfezwuu Uox Aphegr

Condition: used, Year of construction: 2015, Technical details: max. turning diameter: 255 mm turning length: 500 mm control: FANUC 31i manual guide swing dia.: 270 mm centre distance: 639 mm bar material dia.: 66 mm travel -x axis: Rev. 1+2:: 190 mm travel -y axis: Rev. 1+2: +- 40 mm travel -z axis: Rev. 1+2: 500 mm spindle turning speed - stepless: S1 / S2: 4000 / 5000 1/min spindle nose: A2-8 / A2-6 spindle bearing diameter: 120 / 100 mm C-Axis: 0,001 ° Turret No.1 stations / rotary tools: 12/12 Turret No.2 stations / rotary tools: 12/12 Driven Tools: 6000 1/min rapid traverse X-axis: 16 m/min Pedpfx Apjzv Tmtehsgr rapid traverse Y-axis: 12 m/min rapid traverse Z-axis: 20 m/min spindle drive: S1: 15/11, S2: 7,5/5,5 kW Driven Tools: 18 kW total power requirement: 65 kVA weight of the machine ca.: 9,6 t dimensions of the machine ca.: 2,85 x 2,2 x 2,05 m CNC-turning-center with 2 turrets, 2x 12-pockets (24 position) turret with 12 live-tools, Y-axis on both turrets. subspindle travel 635mm, rapid feed 30 m/min, chipconveyor, approx. ? h "machine on", approx. ?h "spindle on" *

Condition: as good as new (ex-display), machine/vehicle number: MCC101A260T7E00B, Manufacturer: Danfoss Product type: VLT MCC 101 sine-wave output filter Type code: MCC101A260T7E00B Part number: 130B4125 Input/output voltage: 3 × 525–690 V Rated current: 260 A at 50 Hz Rated current: 246 A at 60 Hz Rated current: 195 A at 100 Hz Frequency: 50/60 Hz Maximum output frequency: 100 Hz Switching frequency: 2 kHz Inductance: 480 µH Capacitance: 198 µF Power loss: 1,300 W Protection class: IP00 / open chassis Maximum ambient temperature: 45 °C Weight: approximately 315 kg Serial number: 000168-423 Made in Germany CE and UL marked The Danfoss VLT MCC 101 sine-wave filter is designed for installation on the output side of a frequency converter. It suppresses the switching-frequency component and provides a near-sinusoidal motor voltage, reducing stress on motor insulation and bearings as well as audible motor noise. Suitable for industrial high-power drive applications and use with compatible Danfoss VLT frequency converters. Condition: Surplus unit. Please refer to the photographs for the actual condition and scope of supply. The buyer is responsible for verifying compatibility with the intended frequency converter, motor and application. Podezw Enxepfx Aphogr

Condition: used, Year of construction: 2015, x-travel 570 mm y-travel 210 mm z-travel 365 mm turning speeds 50 - 6300 U/min Psdpjzv Ul Rsfx Aphjgr spindle taper ISO 40 SK quill stroke 127 mm table: 915 x 200 mm table load 160 kg feed range 0,04/0,08/0,16 mm/min total power requirement 2,2 kW weight of the machine ca. 850 kg. range L-W-H 1350 x 1300 x 2010 mm Multifunctional drilling and milling machine for professional use. Stepless speed control. Features electronic speed control and a digital position displayâ??features that impress in terms of quality, performance, and price. Heavy-duty, solid construction made of high-quality Meehanite cast iron. All axes feature adjustable dovetail guides. Forward and reverse rotation. High concentricity accuracy thanks to tapered roller bearings, measured at less than 0.01 mm in the quill. Automatic quill feed. Main power switch, forward/reverse switch, emergency stop pushbutton. Digital speed display. Height-adjustable protective screen with microswitch. Central lubrication for spindle, nut, and guides; milling heads can each be swiveled 90° to the left and right; spindle head carrier rotatable by ±90°; manual spindle brake; includes Digital Readout (DRO), digital 3-axis position display (Xâ??Yâ??Z) For measuring positions

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: SKF29452E, outer diameter: 480 mm, Industrial spherical roller thrust bearing SKF Explorer 29452 E SKF 29452E SKF29452E Bearing SKF 29452E EAN 7316576613395 Brand new, factory-sealed bearing, physically in stock. Technical specifications Inner diameter (mm): 260 Outer diameter (mm): 480 Width (mm): 132 Weight (kg): 105.00 Code designation: 29452 E Type: Spherical roller thrust bearings Manufacturer: SKF Country: SE Sweden Availability: Shipping within 24h Minimum order (pcs): 1 Item EAN number: 7316576613395 Own transport available. Podpfjxz Rz Sox Aphsgr

Condition: ready for operation (used), Year of construction: 1999, spindle motor power: 13,500 W, spindle speed (max.): 7,500 rpm, overall weight: 8,000 kg, controller manufacturer: SIEMENS, controller model: 840D, This 3-axis HULLER HILLE DVH 150 Duo vertical turning machine was manufactured in 1999. It features a maximum turning diameter of 160 mm and a swing diameter of 200 mm. Equipped with a Siemens 840D CNC control, it offers high precision and efficiency with speeds up to 7500 rpm and rapid traverse rates up to 60,000 mm/min. Ideal for complex turning tasks, the HULLER HILLE DVH 150 Duo machine we have for sale. Contact us for further details. Additional equipment • Central lubrication system Pjdpfxozwvzie Aphjgr Machine Benefits Technical Machine Benefits • X-axis: roller guide / z-axis: glide guide • X-axis roller guide and z-axis glide guide, maximum axis speeds: x-axis 60,000 mm/min, z-axis 30,000 mm/min, maximum feed rate: 30,000 mm/min, maximum rapid traverse: 60,000 mm/min • Maximum swing diameter: 200 mm / maximum workpiece and chuck height: 220 mm • Spindle diameter in front bearing: 80 mm • Machine connection power: 45 kw • Ball screw pitch: x-axis 20 mm, z-axis 10 mm • Central lubrication interval: 15,000 m, amount: 4 cycles

Year of construction: 2019, condition: new, Brand NXZ Model: 6316, 6318, 6319, 6320, 6326, 6328, 30224, 30315, 30316, 30324, 30328, 30330, 32221, 32315, 32316, 32317 Year of construction: Unused Pgsdpeqa An Ujfx Apher Weight (kg) approx 11360 Made in China Comments Single packed or wrapped, packed in cartons by multiple pieces Selling condition Selling as full quantity only

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 135001, travel distance X-axis: 1,350 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 810 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 40, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the machine on time between September 21st and October 1st! TECHNICAL DETAILS Pjdpfx Aszqunusphsgr Travel in X-axis: 1,350 mm Travel in Y-axis: 620 mm Travel in Z-axis: 810 mm Feed rate and rapid traverse Feed rate X/Y/Z-axis: 15 m/min Rapid traverse X/Y/Z-axis: 30 m/min Spindle Spindle speed: 12,000 rpm Spindle drive power: 10 kW (100% ED) Spindle drive power: 12 kW (40% ED) Spindle mounting: ISO 40 Spindle bearing diameter (front): 70 mm Spindle bearing diameter (rear): 60 mm Spindle operating hours: 6,510 h Distance from spindle to table: 90 – 900 mm Distance from spindle center to machine frame: 655 mm Tool magazine Tool magazine capacity: 40 Max. tool length: 300 mm Max. tool diameter with occupied neighboring positions: 80 mm Max. tool diameter with free neighboring position: 125 mm Work table Table length: 1,550 mm Table width: 620 mm Number of table slots: 6 Control system Control system manufacturer: HEIDENHAIN Control system model: iTNC 530 MACHINE DETAILS Input voltage: 400 V Input frequency: 50 Hz Input current: 63 A Rated apparent power: 35 kVA Dimensions and weight Overall length: 7,000 mm Overall width: 2,700 mm Overall height: 2,900 mm Machine weight: 8,650 kg EQUIPMENT - Dividing head, 4th and 5th axis, manufacturer WALTER, type TANIH 200 - LANG 5-axis clamping system - RENISHAW measuring probe - Chip conveyor - Documentation and manuals External reference: Wahl - Lot 69 Note: without the machine vice located on the clamping surface.

Condition: good (used), Year of construction: 2011, cutting diameter 290 mm capacity 90 degrees: flat 320 x 290 mm capacity 45 degrees: flat re 240 x 150 mm capacity 45 degrees: round re 240 mm capacity 60 degrees: flat re 150 x 180 mm capacity 60 degrees: round re 150 mm capacity 45 degrees: flat li 240 x 100 mm capacity 45 degrees: round li 240 mm turning speed range: 20 - 100 m/min saw band length 3100 x 27 x 0.9 mm power capacity 2.4 kW weight of the machine ca. 570 kg range L-W-H 1800 x 950 x 1550 mm Current list price: approx. 12.000 euros Special price upon request Features: - Semi-automatic electro-hydraulic band saw (INDUSTRIE) - Suitable for single-piece and small-batch production - Large, ball-bearing-mounted cast-iron rotary table * For miter cuts from 45° left to 60° right - Hydraulic cutting feed Material clamping - Continuously variable band speed (Model "F") - Ergonomic control panel - Micro-spray lubrication system (spray oiler) - 2x PEGAS roller conveyor - Operating instructions in German Pgedpfx Aezv Ulwsphor * Semi-automatic work cycle: After the cycle starts, the vise closes automatically; the saw frame lowers for the cut and automatically raises back to the predefined starting position once the cut is complete. Afterward, the vise opens.

Condition: excellent (used), Ball bearings, roller bearings, axial cylindrical roller bearings, cylindrical roller bearings -Manufacturer: NSK, cylindrical roller bearings. Double row, unused. -Type: NNU4960E4C3DR -Outer diameter: 420 mm -Inner diameter: 335 mm -Width: 120 mm -Number: 2x cylindrical roller bearings available Pedezbrkcopfx Aphegr -Price: per piece -Dimensions: Ø 420 x 120 mm -Weight: 34.7 kg/pc.

Condition: good (used), Plummer block housings, pillow block housings, pillow block housings, pillow block housing units, pillow block housing units, SKF pillow block housings, pillow block housing units Pgedpfx Aoiq Tiaophsr -Plumb block bearing: bearing block, inner Ø 50 mm -Holes: 160 mm spacing x Ø18 mm -Quantity: 3 pillow block housings available - Price: per piece -Dimensions: 210/50/H170 mm -Weight: 3.3 kg/piece

Condition: used, Year of construction: 2015, functionality: fully functional, Heavy-duty pallet decoiler with integrated precision straightening head, designed to feed coiled strip material into stamping lines and other downstream processing. The large 1500 mm rotating table handles full pallet-mounted coils up to 3000 kg, while the 9-roll straightener (5 lower driven + 4 upper) ensures a flat, stress-relieved strip ready for production. Both turntable and straightener are independently driven via frequency inverters, allowing precise speed and tension control. Ideal for stamping operations where coil material is delivered on pallets rather than mandrels — eliminating the need for separate coil cars and reducing changeover time. Technical Specifications Table diameter 1500 mm Table load capacity 3000 kg Max. table rotation speed 10 rpm Strip speed 10 m/min (at core Ø 300 mm) Stamping direction Left to right Winding direction CW or CCW (selectable) Max. strip thickness 1.5 mm Max. strip width 220 mm Turntable drive motor 2.2 kW, inverter-controlled Podpfxjzav Ngo Aphsgr Turntable bearing Four-point bearing Straightener head 9 rolls (5 lower + 4 upper) Roll diameter 40 mm Lower rolls All driven Straightener drive motor 0.75 kW, inverter-controlled Electrical connection 3×400V + N + PE, 50 Hz, 16 A Dimensions (L × W × H) 2250 × 1500 × 1700 mm Weight ~750 kg Paint finish RAL 7035 light grey, structured

Condition: ready for operation (used), Year of construction: 2014, spindle speed (max.): 3,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,500 mm, spindle motor power: 20,000 W, total height: 1,900 mm, total width: 2,100 mm, overall weight: 3,500 kg, controller manufacturer: HEIDENHAIN, controller model: MANUAL plus 620, product length (max.): 3,300 mm, number of axes: 3, Horizontal turning machine manufactured in 2014. This SEIGER SLZ 500E features a center distance of 1500 mm and a swing diameter over the bed of 500 mm. It is equipped with a powerful main drive of 20/25 kW and a maximum spindle torque of approximately 1400 Nm. If you are looking to get high-quality turning capabilities, consider the SEIGER SLZ 500E machine we have for sale. Contact us for further details regarding this machine. - Spindle Speed: 1 - 3,000 RPM (Stage 1: 1 - 750 RPM, Stage 2: 1 - 3,000 RPM)- Spindle Power (100/60% ED): 20 / 25 kW- Taper Size: DIN 55027 Size 8 (Main Spindle Nose) / MT 5 (Tailstock Quill)- Tool Stations: 8-station Sauter disc turret + Parat 4-way quick-change holder Size 3- Through-Spindle Coolant: No- Counter Spindle: No- Max. Bar Diameter: 78 mm (through Schunk chuck) / 93 mm (spindle bore)- Max. Workpiece Diameter: 500 mm (swing over bed) / 280 mm (swing over cross slide)- Max. Tool Weight: No info- Driven Tools: Yes (Sauter 8-station disc turret for driven tools, VDI shaft D=30 mm with digital servo motor)- Positioning Accuracy: According to DIN 8605- X-axis Travel: 260 mm- Z-axis Travel: 1500 mm (center distance)- C-axis Specification: Pneumatically engaging with digital motor and gear drive on main spindle (Spindle speed up to 15 rpm, Torque ca. 420 Nm)- Bed Width: 350 mm- Turning Tool Cross Section (H x W): 25 x 25 mm- Spindle Diameter in Front Bearing: 130 mm- Inner Taper of Main Spindle: Metric 100- Maximum Spindle Torque: approx. 1400 Nm- Feed Force Z-axis: 10,000 N- Feed Force X-axis: 7,000 N- Feed Range (Longitudinal/Planar): mm/rev- Rapid Traverse Speed X/Z: 10 / 7 m/min- Tailstock Quill Diameter: 90 mm- Tailstock Quill Stroke: 180 mm- Max Workpiece Weight (Between Centers): 1,000 kg (1,250 kg with steady rest)- Max Workpiece Weight (Flying in Chuck): 300 kg (at 200 mm center of gravity distance)- Operating Voltage: 400 V / 50 Hz- Control Voltage: 24 V DC- Connected Load: 41 KVA- Current Rating: 60 A- Main Fuse: 63 A - Additional Equipment: - Chip protection wall, 2 movable sliding safety doors with windows, machine light, Quick-change tool holder size C, coolant device, live center MT 5, operator tool set, linear scale in X-axis, safety clutch in X and Z axes- Chip Conveyor: discharge height 1000 mm, length 535 mm, 60-degree gradient, continuous feed, ca. 250 dm³/h capacity, speed ca. 2 m/min- Two-speed Planetary Gearbox: Item 6054375, automatically shifting, flanged on main spindle motor- Parat 4-Way Turret Quick-Change Holder: Size 3, manually operated, mounted on zero-point clamping system- Sauter 8-Station Disc Turret for Driven Tools: VDI shaft D=30 mm with digital servo motor, mounted behind turning center- Boring Block: with VDI 50 retainer and internal coolant supply, mounted on zero-point clamping system in front of turning center- Zero-Point Clamping System: base part mounted on cross slide- Hydraulic Hollow Clamping Unit: Schunk ROTA THW plus D=315 mm 3-jaw chuck with DIN 55027 Size 8 mount and 78 mm bore passage- Reinforced Coolant Pump: (2.5 bar at 40 L/min, max 5. Podpszvx Agefx Aphjgr

Condition: good (used), Force measuring device, force measuring instrument, calibration, force measurement technology, load cell, tensile force measuring bearing, force sensor, tensile and compressive force sensor -Manufacturer: Lorenz, 4 pieces tension and compression force sensor with Durbal, rod end spherical bearing -Sensor: Lorenz Type K-12 -Measuring range: - 100 kN -Sensitivity: 1.000mV/V / 0.999mV/V / 1.001mV/V -Swivel bearing: Durbal EF 35-20-501 -Dimensions of the articulated rod: 445 to 530 x 81 x 65 mm -Fork head: Bore Ø 35 mm -Number: 3 boxes available, sensitivity as shown in photos -Price: per box -Box dimensions: 590/390/H200 mm -Weight: 30.2 kg/box Pgodpfx Apjg Sxyvehor

Condition: ready for operation (used), Year of construction: 2010, operating hours: 36,604 h, travel distance X-axis: 750 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 600 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, total height: 2,700 mm, total width: 2,250 mm, table width: 500 mm, table length: 1,000 mm, table load: 800 kg, overall weight: 8,500 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 30,000 W, number of slots in tool magazine: 22, product length (max.): 4,500 mm, number of axes: 4, This 4-axis AXA DBZ vertical machining centre was manufactured in 2010. It features an impressive X-axis travel of 2 x 750 mm for pendulum processing, Y-axis travel of 500 mm, and Z-axis travel of 600 mm. The machine includes a NC rotary table with hydraulic counter bearing and a plate-type tool changer. If you are looking to get high-quality machining capabilities, consider the AXA DBZ vertical machining centre we have for sale. Contact us for further details. • Spindle hours: 36,604 h (verified via image) • Operating Hours: 40,049.8 h • Machine ON hours: 81,189 h • Travel Range X-Axis: 2 x 750 mm (pendulum operation) • Travel Range Y-Axis: 500 mm • Travel Range Z-Axis: 600 mm • Clamping Surface / Table Size: 1350 x 500 mm right and left (2x) • Max. Table Load: 800 kg/m² • Spindle Type: Hollow shaft motor, water-cooled • Spindle Speed Range: 30 - 8,000 rpm (Max 10,000 rpm listed / Nmax 12,000 rpm) • Spindle Power (40% ED): 30.0 kW • Spindle Power (100% ED): 20.0 kW • Spindle Torque (40% ED): 143.2 Nm • Spindle Torque (100% ED): 95.5 Nm • Tool Holder: SK 40 • Tool Changer Capacity: 22 positions (Plate/Disc type) • - Max. Tool Diameter: 85 mm (135 mm with free adjacent spots)- Max. Tool Length: 400 mm- Max. Tool Weight: 8 kg (at L=400mm) / 5.5 kg (at L=200mm)- Rapid Feed X-Axis: 25 m/min- Rapid Feed Y-Axis: 25 m/min- Rapid Feed Z-Axis: 20 m/min- Electrical Connection Voltage: 3x 400V / 230V / N / PE, 50 Hz- Connected Load: 55 kVA- Backup Fuse: max. 100 A- Control Voltage: 24 V • Overall dimensions: 4500 × 2250 × 2700 mm • Tool changer: Plate-type tool changer • Design/configuration: Traveling column; Left/Right work areas (pendulum machining) • Safety/enclosure: Maintenance door Additional equipment • NC rotary table RTA 200 with hydraulic counter bearing (4th axis) • Clamping system: Hydraulics for right/left work areas, incl. rotary union for 4th axis • Internal coolant supply (IKZ) • Chip conveyor Pedpfxoy Edv Hs Aphsgr • Emulsion (coolant) system • Recooling unit (chiller) • A 4th axis is mounted on one clamping side. It is included with the delivery. Technical Specification Taper Size SK 40

Condition: used, Year of construction: 2018, operating hours: 6,442 h, Technical Data Working Area Axis Travel - X-axis: 4000 mm - Y-axis: 1970 mm - Z-axis: 455 mm Machining Area - X working area: 3000 mm - Y working area: 1550 mm - Z clearance: 250 mm Axis Systems - X-axis: Helical rack and pinion drive - Y-axis: Precision ball screw drive - Z-axis: Precision ball screw drive - Linear guides on all axes - Automatic central lubrication Main Spindle - 5-axis electro spindle - Type: 5-axis spindle with universal joint - Power: 12 kW (S6 operation) - Tool holder: HSK F63 - Maximum speed: 24,000 rpm - Ceramic bearings with air cooling - Full power available at approximately 12,000 rpm - Speed range: 1,000 - 24,000 rpm - Clockwise rotation - Integrated tool changer interface - Liquid-cooled spindle - Electrically controlled extraction hood - Maximum tool weight: 6 kg - Maximum saw blade diameter: 350 mm Tool Changer System 12-position linear tool magazine - Mounted on the left side of the machine frame - Separate station for tool changers Podpszuw E Rjfx Aphjgr - Maximum tool diameter: 250 mm - Maximum tool length: 240 mm 18-position disc tool magazine - Mounted on the gantry - Suitable for drilling tools and tool changers - Maximum tool diameter: 250 mm - Maximum tool length: 280 mm Drilling Aggregated Head DH18 6H 1S drilling head - 12 vertical spindles: 7 spindles in the X direction, 5 spindles in the Y direction - 4 horizontal spindles in the X direction - 2 horizontal spindles in the Y direction - Drilling stroke: 70 mm - Maximum drilling depth: 70 mm - Tool holder: 10 mm - Individual control of the spindles - Integrated slotting saw - Saw blade diameter: 120 mm - Maximum slotting saw blade thickness: 5 mm - Speed up to 7,500 rpm Vacuum and Clamping System Console Table - 6 consoles with front and rear stops - Wireless two-circuit vacuum system - Height of vacuum cups: 100 mm - Pneumatic console locking - Programmable pneumatic stops - 4 adjustable side stops - Reinforced support arms - Load-bearing capacity of the support arms: 40 kg each Vacuum Pump Capacity: - 90 m³/h at 50 Hz - 108 m³/h at 60 Hz - Additional vacuum connection for template machining - Controlled compressed air connections for frame clamps - Separate vacuum and compressed air switching for all consoles WoodFlash Software Package Control Panel - Complete machine operation via the CNC panel - Program creation and editing - Tool and workpiece management - Manual machine commands - Monitoring of vacuum, compressed air and safety systems Mobile Control Panel - 24" LED monitor - Keyboard and mouse - USB connection Operator Device for Feed Rate - Manual feed override potentiometer - Variable feed rate adjustment during machining Safety Devices - CE safety system - Safety mats instead of light curtains - Emergency stop system - Protective fence on the left side - Safety monitoring of the doors - Sensors to monitor vacuum and compressed air Optional Equipment - External release switch - Protected energy chain system - Additional locking for A and C axes - Saw blade changing station on the gantry - Operating hours: 6442 hrs.

Year of construction: 1992, condition: new, Brand NSK Model: 6203 C2 Year of construction: Unused Weight (kg) approx. 12460 gross / 11880 net Pgodpfsqa Anfex Aphor Number of pieces in stock 170.280 ( approx) Made in Japan Comments single row deep grove ball bearing , packaging by 360 pieces in carton Sales condition Please contact us for min quantity

Condition: refurbished (used), 2 pieces 125 mm Ø x 170 mm Ø x 173 mm long 1 piece 140 mm Ø x 190 mm Ø x 173 mm long Pgedpengz N Iofx Apher

Condition: good (used), Year of construction: 2010, functionality: fully functional, bending force (max.): 230 t, number of axes: 5, Equipment: CE marking, documentation/manual, safety light barrier, Bending length [mm] 3230 Press force [tons] 230 Control system TRUMPF TASC 6000 Standard equipment: Machine - Robust machine frame as a welded construction in all-steel design - Press beam with high bending strength - Spherical bearing of the press beam with press beam inclination - Proportional valve technology and switchable double pump - Modern block hydraulics with control valves mounted on the cylinder - Electronic pressure gauge - Measuring system with centrally mounted glass scales and temperature compensation - Oil cooler - Control cabinet cooling - Modern machine design Back gauge system - Rear back gauge system, 2-axis, with rack and pinion drive for X and R axis - 2 back gauge fingers with secure adjustment from the front Tool clamping - Upper tool clamping system "New Standard Clamping", manual, hardened, self-centering; for vertical tool change - Lower tool holder with hydraulic clamping, hardened Lower tool movement - Lower tool movement programmable (pneumatic, 2 positions) Control - Machine control: TRUMPF TASC 6000, graphical - Workshop programming - Windows XPe, Pentium 4 with 2.8 GHz clock frequency - 2 GB RAM - 15" touch screen - Network-enabled - Teleservice via analog telephone connection Operation - Control panel with LCD keypad, foot switch for up, down and emergency stop - Communication bus for the use of ACB angle sensor tools Safety - Safety device: integrated side doors + Rear back gauge system, 5-axis (X, X1, R, Z1, Z2) + Upper tool clamping, hydraulic + CNC crowning Podpozv Sbiofx Aphsgr + BendGuard + Additional foot switch + 2 support consoles + 1 MobileControl + ACB prepared

Year of construction: 1990, condition: new, Brand SKF Type 6202-Z/QE6 Year of manufacture: Unused Weight (kg) approx. 9400 gross / 8780 net Number of pieces in stock 193.200 ( approx) Made in France Comments Contact us for min. quantity Verkoopcondities Contact us for min. quantity Pjdpfx Aeqa Am Tophegr

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Control system: SIEMENS 840D Machining diameter: 2,800 mm Machining height: 1,000 mm Load capacity: 16,000 kg Max. swing diameter, approx.: 2,800 mm Turning diameter – external, max.: 2,800 mm Spindle speed: 63 min-1 Travel of the cross slide: 620 mm Ram stroke – max.: 690 mm INCLUDES Chip conveyor 4-position tool turret Hydraulic chuck: 2,800 mm EQUIPMENT Podpfx Aozw E D Hjphjgr Tool holder CAPTO 6 Electric handwheel Retrofit in 2009 DESCRIPTION The machine is in very good condition and was used for hard turning of roller bearings. In 2009, the machine underwent a mechanical overhaul by Maschinenbau HELLWIG. As part of this general overhaul, the control system was also upgraded to a SIEMENS 840 Powerline.

Condition: new, a selection of 80 bearings for sale bearings 60.., 62.., 63.. NU 3.., NU 2.. and NU 22.. Pedpezhv I Djfx Aphegr see the list for details.

Condition: good (used), Weinig Hydromat H23 8 spindle 50mm spindles 6,000 RPM Bottom 7.5kW jointer ready Right 7.5kW straight jointer ready Left 15kW straight and profile jointer ready Right 11kW profile jointer ready Podpfx Aozwfxkephjgr Top 15kW jointer ready Bottom 18.5kw jointer ready Top 11kw straight and profile jointer ready + outboard bearing Bottom 7.5 kw straight and profile jointer ready + outboard bearing 7.5kW feed motor. Automatic lubrication system. Full heavy duty sound enclosure Possible to supply with moulder infeed and outfeed as needed. Possible to offer tooling if needed.

Condition: excellent (used), Year of construction: 2014, Roller coater BÜRKLE easy coater RCL 12M and UV system easy cure UV - TRUV with 2 lamps and 2 x roller conveyor BÜRKLE easy coater RCL 1300: For one-sided application on flat surfaces from above Operating side left Touch screen control TP 177 Micro Rubberized application roller Hard chrome-plated metering roller can be sensitively adjusted via worm gearbox Controlled belt transport with exposed counter roller for safe workpiece transport Quick-change system with split bearing and cross-disc coupling for easy changing of the application roller Oscillating squeegee, can be changed quickly for cleaning Separate, infinitely variable FU direct drives for application roller, metering roller and transport Reversible dosing roller Motors and limit switches in Ex version on the machine Non-Ex control cabinet and control panel outside the danger zone on the machine Mobile version Electrical preparation for integrating the roller coating machine into a coating line Technical data Working width: 1300 mm Workpiece height 3 - 80 mm Min. workpiece length 400 mm Rubberized application roller DM 240 mm Chrome-plated metering roller DM 172 mm Transport speed 2 - 15 m/min variable Connected load approx. 2.4 kW Speed of metering roller 1.0 - 3.0 m/min Working height 900 mm (+/- 20) Safety equipment according to CE Incl. switch cabinet Weight approx. 1650 kg UV system e.a.s.y. cure UV - TRUV with 2 lamps One-sided curing of UV-curing lacquers on flat workpieces from above Incl. control cabinet Working width max 1300 mm Workpiece height max 80 mm Pgjdpfx Apet Dx U Sshsr Number of lamps 2 # - changed 10/2023 UV lamp power 120 W/cm² each Speed 2 - 15 m/min variable Transport: Transport carpet Exhaust air connection 2 x 250 mm Connected load 39 kW Weight approx. 750 kg 2 x roller conveyor RB 1300 Working width 1300 mm length 4000 mm Speed 2 - 15 m/min variable Connected load 2 x 0.37 kW Total system length 12450 mm

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, center width: 1,200 mm, overall weight: 7,000 kg, travel distance X-axis: 500 mm, travel distance Z-axis: 800 mm, controller model: Bosch Rexroth MTX, TECHNICAL DETAILS Center distance: 1,200 mm Max. outer diameter: 350 mm Max. workpiece weight between centers: 50 kg Cross slide, X-axis Travel, X-axis: 500 mm Max. speed: 30 m/min Resolution: 0.1 µm Longitudinal slide, Z-axis Travel, Z-axis: 800 mm Max. speed: 30 m/min Resolution: 0.0005–0.1 mm Multi-function head, B-axis Swivel range: -45° to +225° Swivel time for 180°: < 3 s Positional accuracy: 0.0002° Repeatability: 1″ Resolution: 0.001° External machining Max. machining length: 750 mm Peripheral speed: 50 corundum / 80 CBN Drive power: 15 kW Max. grinding wheel dimensions: Ø 400 × 50 × 152.4 mm Internal machining Max. bore diameter: 250 mm Max. bore depth: 235 mm Drive power S1: 1.8–7.5 kW Speed range: 30,000–50,000 rpm Workpiece spindle, C-axis Max. speed: 1,500 rpm Drive power: 1.8 kW Drive torque: 90 Nm Resolution of measuring system: 0.001° Roundness accuracy: 0.8 µm Positional accuracy: 0.0001° Tailstock Quill stroke: 50 mm / 80 mm Quill diameter: 60 mm Bearing: hydrostatic Psdpfxozwm Ake Aphjgr Fine adjustment for cylindricity corrections: ± 40 µm 3-point steady rest Clamping range, diameter: 20 – 150 mm Coarse adjustment: 40 µm Fine adjustment: 2 µm Adjustability: stepless MACHINE DETAILS CNC control: Bosch Rexroth MTX Dimensions & Weight Dimensions (L x W x H): 2,850 x 2,470 x 2,290 mm Weight: 7,000 kg EQUIPMENT 3-point steady rest