Used Bearing for sale (3,032)

Condition: used, Year of construction: 2016, Overview This belt press was manufactured in 2016 by SRAML. The machine is designed for the continuous extraction of juice from crushed apples using a continuous belt pressing system. The SRAML TP50 belt press is delivered together with the SRAML JF1500 mechanized self-cleaning filter, which removes impurities such as seeds and stems. It was operational when taken out of regular production and has been maintained as backup equipment. The machine was replaced by a higher‑capacity press. Technical data  - Capacity: 700 kg/h (apples) - Application: Juice extraction from crushed apples - Configuration: Continuous belt pressing system with mechanized self‑cleaning filtration system - Filtration system: Mechanized self‑cleaning filter for removal of seeds and stems Fgedpfx Aezpffhsptsg Scope of Delivery - Belt Press | SRAML | TP50 | 700 kg/h | 2016 - Self-Cleaning Filter | SRAML | JF1500 | Removal of seeds and stems | 2016 - Spare parts | Belts, rollers, bearings, self-cleaning filters with pump, gearbox, 0.75 kW motor and further wear parts

Condition: excellent (used), Surface Planer / Jointer, used Working width: 520 mm Total table length: 3000 mm Infeed table length: 1780 mm Outfeed table length: 1180 mm Adjustable fence with angle, size 1500 x 175 mm Motor power: 4.0 kW, 400 V, 50 Hz Cutterhead speed: 5000 rpm 4-knife cutterhead, diameter 120 mm Max. cutting depth: 8 mm Extraction connection: Ø 120 mm Table height: 860 mm Hydraulic table height adjustment with foot pedal Numerical cutting depth display Noise reduction combs on the cutterhead Star-delta starter Emergency stop button Fsdpfx Apey Emf Rotsgg CE marked Including all documentation Knife setting gauge NEW drive belts NEW cutterhead bearings NEW planer knives Dimensions (L x W x H): 3000 x 950 x 1100 mm Weight approx. 900 kg Note on used machines: • Errors in technical data and prior sale reserved. • Quoted prices are ex-location, loaded free on truck. • The machine has been cleaned and function-tested. • All machines are sold as inspected, without any guarantee or warranty. Buyers are welcome to inspect the machine at its location. • Special agreements are only valid in written form. (We will only respond to inquiries with your address and telephone number!)

Condition: new, Year of construction: 2026, functionality: fully functional, number of drawers: 30, SLIDING RACK FOR GLASS M80-30 MANUFACTURED IN 2026/ BRAND NEW We manufacture sliding racks for glass pane storage (boxes with glass) or other panel materials (metal sheets, quartz sinters, polycarbonates, furniture boards). We design and manufacture our racks from scratch in Poland. Fjdpfeha E S Tox Aptsgg The materials which we use for manufacturing hold the proper certificates of durability and they are subject to quality control on a continuous basis. Storage racks consist of sliding and slightly inclined drawers. They save up to 75% of space because all the partitions are parallel and they are separated every 10 millimetres. We also offer various sizes and load-bearing capacities. However, after consultations, we are able to manufacture a storage rack of different parameters, considering your individual conditions and requirements. The inclination of spans depends on assembly – it may be right hand sided or left hand sided. We recommend this storage rack especially to glass production facilities, stoneworks facilities, furniture production facilities and advertising companies, which want to use their space effectively. The racks are delivered for self-assembly in a package. The assembly is very simple and easy owing to our long-term experience which allowed us to create a well-thought product which is attached with the assembly instructions, making the assembly trouble-free. In case of any problems, do not hesitate to contact our technical department. We also provide charged assembly services by our technicians in your location. M80-30 RACK TECHNICAL DATA Intended use – single glass panes 255 cm x 160 cm Maximum pane size - 275 cm x 170 cm Number of partitions -30 The width of the storage strip for glass – 8 cm The length of the storage strip for glass - 308 cm The material on which glass is placed – wooden board 308 cm x 8 cm x 2.5 cm Structure height (A) – 218 cm Structure width (B)- 436 cm Structure depth (C)-318 cm Space needed for the correct use of the rack – 27 m2 Requirements for the ground – smooth/straight The number of the partition guide bearings – 8 pcs. Front wheel – Ø 160 / reinforced polyamide Rear wheel – steel wheel with a bearing / rolled along the profile Colour - RAL 7040 (grey) Anti-corrosion protection – phosphating and powder-coating of steel elements Permissible load-bearing capacity of a single partition – 900 kg Permissible load-bearing capacity of the whole rack – 27000 kg Partitions inclination – left or right – depending on assembly Assembly time - 14 hours The number of people required for assembly – 2 people DOCUMENTS ATTACHED TO M80-30 RACK - User’s Manual - Assembly Instructions - Rating plate - 12 months’ warranty The product is delivered as a whole ready for use. We also deliver our racks for glass to the EU countries and other countries.

Condition: new, Year of construction: 2025, functionality: fully functional, number of drawers: 10, warranty duration: 12 months, SLIDING RACK FOR GLASS D220-10 MANUFACTURED IN 2026/ BRAND NEW We manufacture sliding racks for glass pane storage (boxes with glass) or other panel materials (metal sheets, quartz sinters, polycarbonates, furniture boards). Fgsdpfx Apohcipgjtog We design and manufacture our racks from scratch in Poland. The materials which we use for manufacturing hold the proper certificates of durability and they are subject to quality control on a continuous basis. Our sliding racks have the form of slightly inclined drawers. They save up to 75% of space because all the partitions are parallel and they are separated every 10 millimetres. We also offer various sizes and load-bearing capacities. However, after consultations, we are able to manufacture a storage rack in various parameters, considering your individual conditions and requirements. The inclination of spans depends on assembly – it may be right hand sided or left hand sided. We recommend this storage rack especially to glass production facilities, stoneworks facilities, furniture production facilities and advertising companies, which want to use their space effectively. The assembly is very simple and easy owing to our long-term experience which allowed us to create a well-thought product which is attached with the assembly instructions, making the assembly trouble-free. In case of any problems, do not hesitate to contact our technical department. We also provide charged assembly services by our technicians in your location. D220-10 RACK TECHNICAL DATA Intended use – glass panes 321 cm x 255 cm in wooden boxes Possibility of storing single panes – YES Maximum box size – 345 cm x 275 cm Number of partitions – 10 The width of the storage strip for glass – 22 cm The length of the storage strip for glass – 395 cm The material on which glass is placed – steel supports coated with ash tree strips (5 pieces) Total height (A) – 335 cm Total width (B) – 368 cm Total depth (C) – 407 cm Space needed for the correct use of the rack – 29 m2 Requirements for the ground – smooth / levelled The number of the partition guide bearings – 8 pcs. Front wheel – Ø 160 full / reinforced polyamide Rear wheel – steel wheel with a bearing / rolled along the profile Colour - RAL 7040 (grey) Anti-corrosion protection – phosphating and powder-coating of steel elements Permissible load-bearing capacity of a single drawer – 2 500 kg Permissible load-bearing capacity of the whole rack – 25 000 kg Partitions inclination – left or right – depending on assembly Assembly time - 7 hours The number of people required for assembly – 4 people Drawers – joined (in order to reduce transport costs) Loading the box with glass onto the drawer – gantry, forklift, HDS DOCUMENTS ATTACHED TO D220-10 RACK - User’s Manual - Assembly Instructions - Rating plate - 12 months’ warranty This product is delivered in parts in order to minimise delivery costs. We also deliver our racks to the EU countries and other countries.

Condition: new, functionality: fully functional, Year of construction: 2025, OMEC 4-roll mechanical calender. Fjdpfxofh Skps Aptegg Available for immediate delivery, subject to prior sale. Model: FX4.90.1330. Double-nip configuration. Working width: 1330 mm. Diameter of upper and lower rolls: 90 mm. Diameter of side rolls: 95 mm. Thickness range: 2 – 2.5 – 3 mm. (1.5 x D, 3 x D, 5 x D) Motorized upper and lower rolls with equal power. Motorized side rolls for up/down movement. Front opening of the upper roll. Roll hardness: HRC 55/60, depth 2 mm. Special bearings for side rolls. External lever for adjusting roll inclination. Sheet clamping with bearing-supported device. 2-pedal foot control. Electrical panel compliant with “CE” standards. Indicator in mm for reading sheet clamping. 4-ROLL MECHANICAL CALENDER with double-nip configuration and front release. The upper roll is fixed, while the up and down movement is applied to the side rolls and the lower roll. Sheet clamping is very easy, as once the sheet is inserted between the upper and lower rolls, the latter rises and locks the sheet in place. Power: 1.8 kW Dimensions: 800 x 2100 x H 1300 mm Weight: 625 kg Included with the machine: Conical device on the front of the upper roll. No. 02 digital displays for the position of the side rolls. Grinding/Turning of the rolls after heat treatment. Roll hardening.

Condition: new, empty load weight: 130 kg, maximum load weight: 620 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,304 mm, loading space width: 1,256 mm, loading space height: 1,100 mm, tire size: 13, wheelbase: 155 mm, Year of construction: 2024, Equipment: trailer coupling, SHIPPING IS POSSIBLE TO GERMANY, AUSTRIA, FRANCE, ROMANIA, ITALY, IRELAND, BELGIUM, THE CZECH REPUBLIC, DENMARK, AND THE NETHERLANDS. UT004188 The UNITRAILER Garden Trailer 230 TIPPING transport trailer is the latest product from UNITRAILER. It is currently our largest car trailer with a GVWR of up to 750 kg. The trailer has a folding tailgate, which allows for loading and unloading in just a few minutes. By using a tilting drawbar, it can be placed vertically against the rear wall. We will take care of all formalities associated with the purchase for you. When ordering a car trailer, please specify the GVWR of the vehicle that will be towing the trailer. You can find information on the permissible total weight on the last page, under the information in the vehicle registration document. Fgjdpjir H R Nsfx Apteg Technical data of the Garden Trailer 230 TIPPING car trailer CHASSIS - Steered axle from Knott or AL-KO – special orders available on request from Unitrailer. Wheel size: 155/70 R13. Tilting V-drawbar that can be folded under the trailer floor at any time. BODY - Load-bearing frame made of hot-dip galvanized sheet steel. Curved profiles were used with screws. Loading area: non-slip, water-resistant screen-printed plywood, 9 mm thick. SIDE WALLS - all side walls are made of galvanized steel. Rear side wall folds down. Delivery costs will be charged separately.

Condition: new, empty load weight: 130 kg, maximum load weight: 620 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,304 mm, loading space width: 1,256 mm, loading space height: 777 mm, loading space volume: 3.6 m³, tire size: 13, wheelbase: 155 mm, color: silver, Year of construction: 2023, Equipment: trailer coupling, SHIPPING IS POSSIBLE TO GERMANY, AUSTRIA, FRANCE, ROMANIA, ITALY, IRELAND, BELGIUM, THE CZECH REPUBLIC, DENMARK, AND THE NETHERLANDS. UT004191 The Garden Trailer 230 TILT car trailer from UNITRAILER, with a maximum permissible weight of up to 750 kg, features a folding rear gate, allowing for loading and unloading in just a few minutes! The tilting drawbar allows it to be positioned vertically on the rear gate at any point. All formalities related to the purchase will be handled for you. When ordering a car trailer, please specify the maximum permissible weight of the vehicle that will be used to tow the trailer. Technical data of the Garden Trailer 230 TILT car trailer: CHASSIS - Steering axle from Knott or AL-KO Tire size: 155/70 R13 Tilting V-shaped drawbar, which can be folded under the trailer floor at any time BODY - Load-bearing frame made of hot-dip galvanized sheet steel Curved profiles were used with screws Loading area: non-slip and water-resistant screen-printed plywood floor, 9 mm thick SIDE PANELS - All side panels are made of galvanized steel. Total height of the side panels: 70 cm Fodpfxjir H R Tj Aptjgg Shipping costs will be charged separately.

Condition: used, Year of construction: 2008, x-travel 1500 mm y-travel 800 mm z-travel 700 mm table surface area 1760 x 700 mm spindle taper SK 40 spindle turning speed - stepless 8000 U/min spindle drive 15 kW feeds 1 - 8000 mm/min rapid traverse X/Y/Z axis 15 / 15 / 12 m/min table load max. 2500 kg spindle throat 760 mm ATC 40 Pos control HEIDENHAIN, TNC 530 weight of the machine ca. 12,5 t dimensions of machine L x W x H 4,23 x 2,98 x 2,74 m - with coolant through spindle Accessories: NC-dividing unit (=4th Axis) with tailstock, center height 250 mm; 2 hydr. vices make HILMA, model NC 160, width of jaws 160 mm; various tool holders, chip conveyor, coolant - geometrical overhauled in 2022 - - new ball bearing spindle installed on Y-axis in NOV. 2022 - - the magnetic plates shown on the photo are not included - Fgsdoux Agvjpfx Aptjg

Condition: reconditioned (used), Heavy-duty surface planer Solid German engineering Finely planed machine tables, total table length 3000 mm Table adjustment with ball bearings Chip removal system with micrometer gauge Adjustment for hollow and pointed edges with scale display Fjdpfxjvi H Nfs Aptjgg Dressing fence in heavy cast iron design - 45 degree swivel and height adjustable Machine completely rewired Automatic star-delta start Motor protection switch Motor brake Emergency stop switch CE Blade shaft with 4 strip blades Cutter head diameter 120 mm Planing width: 410 mm, Working table length: 3,000 mm, Cutterblock speed: 5,000 rpm, Motor 400 V, 4.0 kW, 50 Hz Weight approx. : 1050 kg Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: new, empty load weight: 3,090 kg, maximum load weight: 8,510 kg, overall weight: 11,600 kg, axle configuration: 2 axles, loading space length: 5,700 mm, loading space width: 2,430 mm, suspension: steel, tire size: 355/60 R 18, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 355/60 R 18, rear tire size: 355/60 R 18, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Three-way tipper, sideboards 500 mm high, galvanized, wide tires 355/60 R 18, loading height approx. 970 mm, central locking for side and rear sideboards, side sideboards pivoting and foldable, side sideboards with spring relief, platform floor made of fine-grained steel, 4 mm thick, 12 x heavy-duty lashing eyes recessed in the floor, tipping angle: 50 degrees rear tipping angle and 45 degrees side tipping angle, continuously adjustable drawbar, rear stakes can be inserted, geared support winch with load and fast gear, front, integrated receiving shaft for two aluminum loading ramps in the chassis, contour marking according to ECE R 048 regulation, surcharge for aluminum ramps, load-bearing capacity per pair 10 tons and 2 x folding supports, rear, ramps suitable for steel-tracked vehicles and vehicles with rubber tires, price: 1,900 euros, -- subject to printing errors, errors and changes, sample images --, more data at: !, More details: ! Fedpfx Apezygd Tjtsgg

Condition: refurbished (used), Year of construction: 2013, Grinder LASKA WW-200 Fsdpfx Apszy Hmnstegg 2013 year After technical inspectrion 3 months warranty for parts. All bearings, bushings and rollers new. New cutting set Delivery time: ready

Condition: good (used), Year of construction: 2008, For sale: 1 unit Scherer VDZ 80 DS with the following technical specifications: Swing diameter: 120 mm Z-axis (vertical): 265 mm X-axis (horizontal): 280 mm Front bearing diameter: 85 mm Rear bearing diameter: 75 mm 2 x A4 spindle Spindle drive unit rated power: 16.8 kW Rated torque: 100 Nm Speed: 1,000 – 7,000 rpm Travel speed Z-axis: max. 30 m/min Travel speed X-axis: max. 30 m/min Dimensions: 2.44 x 2.3 x 1.42 m (L x H x W) Weight: 9,000 kg Complete documentation available. Note: The system will likely require some reprogramming, as it was previously integrated into a complete processing line. However, a stand-alone program is available. Fedozvniiopfx Aptjgg Transportation and loading can be organized Europe-wide at extra cost upon request. Prices are subject to VAT. Inspection possible by appointment. Please contact us; our team will be happy to assist you. Machinery Purchase / Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY, MACHINE TOOLS, AND MORE. Are you looking for a high-quality yet affordable machine for your production? Or do you wish to sell your machine? For further information or contact options, please reach us via the contact form.

Condition: new, table length 2400 mm table width 1200 mm table height (lateral area) 200 mm weight 981 kg dimensions of the machine ca. 2400 x 1200 mm SIEGMUND Authorized Dealer - All items in stock! !! SPECIAL OFFER !! Fsdpjxflftofx Aptogg SIEGMUND Retro Welding Table 2400x1200x200 mm, accessories included SIEGMUND welding table just like 25 years ago with plasma nitriding and modern table legs Product description - Table dimensions: 2400x1200x200 mm - High-quality S355J2 steel with plasma nitriding - Material thickness approx. 24.5 - 27 mm - Hole diameter 28 mm - Drill holes in 100x100 mm grid - Corners, edges, and drill holes chamfered at 45° - Side panel height 200 mm - Drill holes in side panels in a diagonal grid - Construction reinforced with ribs Plasma-nitrided version: - Protection against rust / scratches / weld spatter adhesion - Corrosion-resistant / higher load-bearing capacity Specifications: - 28-hole pattern / Dimensions 2400 x 1200 x 200 mm - Plasma-nitrided version - Includes 4x base feet (basic configuration) - Includes accessory set (see Image 3): * 6x 280604 * 12x 280511 * 8x 280420.N * 2x 280110.N * 1x 283999

Condition: new, pressure 60.0 t stroke 250 mm table surface area 1040 x 370 (315) mm column travel between the guideways 1040 mm ajustment speed 8.0 mm/sec working feed 4.0 mm/sec Fgodpexaakgsfx Apteg return speed 10.0 mm/sec engine output 4.0 kW weight of the machine ca. 800 kg. dimensions of the machine ca. 1.700 x 700 x 2.100 mm Features: - Robust electro-hydraulic workshop press with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out bolts, bearings, bushings, and much more. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod * Includes round steel chain and 2 locking pins * Piston rod with metric mount - 1 set of V-block prism supports - Pressure gauge for pressure display - Simple manual control with: * 1 feed speed * 1 working speed * 1 retraction speed - Piston can be stopped in any position - Fixed hydraulic tank mounted on the side - Operating instructions

Condition: new, diameter of brush Ø 250 mm width of brush 40.0 mm turning speed range 2850 U/min Fjdjxaamnspfx Aptjgg voltage 400 Volt total power requirement 1.3 / 1.8 kW weight of the machine ca. 36.0 kg dimensions of the machine ca. 415 x 467 x 356 mm Equipment: - Deburring of individual pieces and small series - Deburring of stretched round, rectangular and square tubes + flat material - Heavy, durable industrial design - with maintenance-free motor - long service life and very smooth running thanks to balanced rotor - with quality ball bearings - storage area for safety glasses - incl. 1x multi-purpose wire brush, wire thickness 0.35 mm - operating instructions

Condition: used, turning length 1000 mm turning diameter 330 mm turning dia. over face-slide 198 mm turning dia. in gap 476 mm spindle bore 38.0 mm turning speeds 70 - 2000 U/min bed width 180 mm spindle taper DIN ISO 702-2 Nr. 4 taper in tailstock 3 MK quill travel 110 mm total power requirement 1.5 kW weight of the machine ca. ca. 610 kg. Fgsdozlukxspfx Apteg range L-W-H 1930 x 755 x 1300 mm Features - Ideal for technical schools, repair shops, and training workshops - Modern main spindle bearing assembly with precision-grade angular contact ball bearings - Single-lever chuck for the tailstock, adjustable for taper turning - Hardened and ground gears and shafts in the gearhead - Optimally suited for machining steel, non-ferrous materials, and plastics - Removable bridge for machining workpieces with large . diameters - To minimize the effects of vibration, the solid prismatic bed . is additionally equipped with ribs - The speed and feed rate adjustment is simple in design, smooth-operating, and . can be shifted precisely Scope of delivery: - 3-jaw chuck - MULTI-FIX tool holder with insert - Safety guard for the 3-jaw chuck - Slip clutch - Coolant system - Foot pedal with brake function, CE-compliant - Rear splash guard - Machine light - Base frame

Condition: ready for operation (used), Year of construction: 2018, cutting diameter 300 mm saw band length 3660 x 27 x 0.9 mm capacity 90 degrees: flat 320 x 290 mm capacity 45 degrees: round 290 mm capacity 45 degrees: flat 260 x 280 mm capacity 60 degrees: round 200 mm capacity 60 degrees: flat 180 x 170 mm coolant capacity ca. 100 l Control SPS total power requirement 2.4 kW AC weight 904 kg range L-W-H 2410 x 1920 x 2020 mm in good conditions Original price approx. 22.000 euros Special price on request Features: - Robust electro-hydraulic miter band saw, fully automatic (INDUSTRIAL) * Fully automatic with automatic material feed * Material feed unit with recirculating ball screws Fgjdpjy Uy S Aefx Apteg - Includes PLC MITSUBISHI control unit * 20 programs, each with 15 cutting lengths + number of pieces programmable - For angles from 0° to 60°, with ball-bearing rotary table * Mitre cuts up to 45° possible in automatic mode * Mitre cuts up to 60° possible in semi-automatic mode * Manual mitre adjustment * Stepless adjustment of the mitre angle - Saw blade guides made of carbide plates - Saw feed continuously adjustable via fine throttle - Strong machine bed and torsion-free saw frame - Stepless speed adjustment of the saw blade - Coolant device - Operating instructions for machine + control system * Special accessories included: - 1x PEGAS chip conveyor

Condition: good (used), Year of construction: 2010, sheet width 4100 mm plate thickness 6.35 mm thickness at "Niro-steel" 4.00 mm cutting angle 0.5 - 2.5 ° Fgsdpszcqy Ssfx Aptog cutting gap adjustment 0.05 - 0.8 mm no. of strokes 9 - 26 Hub/min back stop - adjustable 10.0 - 750 mm down holder 22 Stk. oil volume 200 ltr. engine output 7.5 kW weight 8000 kg. range L-W-H 5145 x 2200 x 1750 mm From a maintenance workshop Very well-maintained / good condition With very few operating hours (!!) Current list price approx. 60.000 euros Special price upon request Features: - Robust electro-hydraulic, slide-guided sheet metal shear - LVD control panel centrally located on the front of the machine (left) - Electro-hydraulic cutting angle adjustment * Includes digital display of actual values - Manual cutting gap adjustment * via handwheel from the front (left) * Includes analog value display - Electro-motorized backgauge with ball screws * Includes digital actual position display * Rapid traverse is possible - 1x extra-long side stop 3,000 mm, with support foot - 1x long support arm - Ball-bearing recessed handles in the support table - Front finger guard - Rear sheet metal chute - Safety device - rear (protective grille) - 1x freely movable foot switch - Machine lighting at the front (custom-built) - Operating instructions

Condition: new, Year of construction: 2019, functionality: fully functional, power: 250 kW (339.91 HP), rotational speed (min.): 992 rpm, input voltage: 380 V, input frequency: 50 Hz, overall weight: 1,759 kg, SIEMENS squirrel-cage induction motor: 1LE5603-3AC83-3GR3-Z_250kW, B02+B60+B61+H00+L51+Q01+Q02+Q72+R16+D47 Fsdpezm U N Djfx Aptjgg 6x PT100 sensors in the winding, PT100 sensor in each bearing, Anti-condensation heating 230 V/50 Hz, SPM nipples for vibration measurement, Insulated bearing on the non-drive end (NDE), Protective coating for C3 environment, EAC certificate. 250kW, inverter supply 380V (from a 400V grid), 50 Hz, 992 rpm, IMV1 with canopy, flange mounting with downward-facing shaft, IP 55, powered by a low-voltage converter, 490 A, 2407 Nm, self-ventilated IC 411, ambient temperature from -20 °C to +40 °C, altitude up to 1000 m above sea level, weight approx. 1,759 kg.

Condition: new, cutting diameter 225 mm capacity 90 degrees: flat 245 x 150 mm capacity 90 degrees: square 200 x 200 mm capacity 45 degrees: flat 160 x 140 mm capacity 45 degrees: round 160 mm capacity 45 degrees: square 140 x 140 mm capacity 60 degrees: flat 110 x 80 mm capacity 60 degrees: square 90 x 90 mm capacity 60 degrees: round 90 mm vice 245 mm turning speed range: 46/92 m/min saw band length 2450 x 27 x 0,9 mm total power requirement 0,7 / 0,81 kW weight of the machine ca. 265 kg Equipment: - compact / robust manual band saw - large bearing-mounted rotary table * for miter cuts from 45° right to 60° left - hydraulic lowering of the saw bow * stepless feed adjustment * limit switch at the end of the cut - 2x saw band speeds - saw band guide made of hard metal plates - manual vice with quick lock - machine base - coolant device - manual saw band tension (star grip at the front) - 1x angle stop - 1x metal saw band Fedpfexaacisx Aptjgg - operating instructions

Condition: new, pressure 220 t chamfer lenght 3100 mm distance between columns 2600 mm column arm 410 mm ram stroke speed 180 mm/sec work speed 10.0 mm/sec return speed 185 mm/sec work stroke 275 mm dayligth 550 mm table height 930 mm table width 200 mm oil volume 300 ltr. voltage 400 Volt total power requirement 18.5 kW weight 11286 kg Dimensions (HxWxD) 4550 x 2250 x 2850 mm ----- HIGH-SPEED hydraulic press brake with increased installation height increased cylinder stroke enlarged projection ----- Furnishing: - DELEM CNC control model DA 66T - swiveling touchscreen control unit - 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm - on ball screws - controlled electr. Stop fingers Z1 + Z2 - split upper deer foot tool Roleri 135.85.R08, "System A" - with additional crowning of the upper wedge - Universal die block - LEUZE light barrier behind d. machine - BOSCH / HOERBIGER hydr. Components - SIEMENS - electrical system - FIESSLER AKAS laser protection device in front of the machine (including FPSC) Fedpexaag Iefx Aptjgg - 2 front support arms with SLIDING system (plain bearings) - Double foot operation - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes

Condition: excellent (used), For sale is a KSB Movitec V 4/16 B vertical multistage centrifugal pump with a 3 kW electric motor. The pump is in good visual condition. The unit also bears the marking of ROCK Elektromotoren Reparaturwerk, indicating a previous inspection/service. Pump technical data: Manufacturer: KSB Model: Movitec V 4/16 B ID: 0005656962/004000 Flow rate Q: 4.0 m³/h Head H: 119.1 m Pump speed: 2920 rpm Connection: PN16 Hydraulics: PN40 Seal: SiC/Ca/EPDM Temperature range according to nameplate: up to +120°C Pump year of manufacture: 2012 Motor: Power: 3.0 kW 50 Hz: 2900 rpm Fedpozvrfzofx Aptogg Voltage: 400D / 690Y V Protection class: IP55 Insulation class: F Operating mode: S1 Motor weight: 27 kg The item being sold is exactly the one shown in the pictures.

Condition: good (used), Year of construction: 1999, travel distance X-axis: 2,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, X travel: 2000 mm Y travel: 500 mm Fodpozzl U Tjfx Aptsgg Z travel: 500 mm Control: Siemens 840 D Feed rate – fine adjustment: 1-8000 mm/min Table size: 2120 x 500 mm Table load: 2000 kp Rapid traverse X-axis: 40 m/min Rapid traverse Z-axis: 20 m/min Tool holder: HSK 63 A Spindle speeds – stepless: 0-15000 rpm Spindle drive: 20 kW Spindle bearing diameter: 70 mm Tool diameter: 63 /126 mm Tool magazine: 40 pcs Weight: 12 t Total power requirement: 65 kVA - Equipment: chip conveyor

Condition: used, Year of construction: 2006, centre height 175 mm centre distance 300 mm number of spindle speeds 2.000 - 8.000 control SIEMENS - 840 D machine weight ab. 7.500 kg Fsdemd Didopfx Aptsgg surface area 1.000 x 270 mm number of T-slots 3 groove width 12 H7 mm flute distance 50 mm spindle diameter in front bearing 55 mm Tool and Cutter Grinder | HAAS - MULTIGRIND AF1 Additional equipment: - Tool laser measuring system: Blum - Lasersystem MINI-MICRP-NANO The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: AF 1 | AF-1

Condition: used, Year of construction: 2009, greates pass round over bed 640 mm swing diameter over face slide 435 mm control SIEMENS - 840 D turning speed range 3 - 2.500 U/min centre distance 2.000 mm spindle bore 70 mm spindle diameter in front bearing 100 mm Lathe - cycle-controlled | VDF-BOERHRINGER - DUS 630 ti The machine is in good condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Fedpfx Apjzaf Hnetsgg #Tags: DUS630ti | DUS 630ti | DUS 630 ti