Used Bellow for sale (180)

Condition: new, We offer you spare parts of all kinds for your conventional or CNC Karstens / EMAG WEISS / GP cylindrical grinding machine—covering your tailstock, workpiece headstock, grinding spindle headstock, ball screw spindles, glass scales, grinding wheel flanges, drive motors, axis drives (BOSCH SIEMENS), ECKELMANN controls, bellows, bearings, K11/K21 infeed controls (new and used), as well as Z-axis reversing blocks for exchange. We service machines from year of manufacture 1955 onwards: ASA-ASE-K10-K11-K12-K13-K16-K19-K21-K22-K23-K24-K25-K26-K27-K28- K29-K33-K35-K37-K50-K51-K52-K53-K57-W11-W21-GP cylindrical grinding machines—all assemblies based on Karstens design. Bedpfsup Aikex Aktelp Comparable/ EMAG-WEISS/ GP cylindrical grinding machines/ Studer/ Kellenberger/ Schaudt/ Tschudin/ Tacchella/ Dannobat.

Condition: new, neu ca. 2 Wochen ab Auftragse Italien 17940 € 344.45 € 350 mm 300 mm 500x160 mm 350x150 mm 300x150x55 mm 2800 1/min 3,6 kW 1020 mm 820 mm 2170 mm 440 kg Dm. 200x78x78 mm This Grinding machine with fixed table derives from the model R.V. 500 but it differs from it as it is equippedwith a long column supported by four bearings and is opportunely stiffened by a sturdy column support. This Surface grinding machine, due to its stiffness and geometrical stability, is highly suitable for grinding with precision pieces of notable height: single or mass-produced die-shop components, moulds, punches, gears and others. Moreover, the nuts of the vertical translation screw and the dowels to realign the wheel motor to the axis,equipping this model of Grinding machine with fixed table, allow preserving perfect work conditions over the years, too. CAST IRON BED to maintain the geometric stability of the grinding machine in time, too. CAST IRON COLUMN, protected by bellows and supported by four adjustable precision bearings, broadly sized for this type of grinding machine with fixed table. Three-phase MOTOR air-cooled by double jacket, to prevent the overheating of the grinding machine motorduring continuous machining and to keep the temperature of the motor shaft and of bearings constant. Hardened, ground and dynamically balanced SHAFT, supported by precision ball bearings, widely sized for this type of grinding machine with fixed table and self-adjusting by means of springs for the backlash preload, to absorb thermal expansions. VERTICAL TRANSLATION SCREW supported by opposite and adjustable ball bearings, with apt motion for maintaining, in this model of grinding machine with fixed table, the wheel work field free from hindrances and for avoiding dust depositions. Metal BELLOWS for a better protection of the vertical translation screw of the grinding machine. Opposite bronze NUTS, for the recovery of the eventual wear in time of the vertical translation screw of the grinding machine with fixed table. REGISTRATION DOWELS to re-align the wheel motor of the grinding machine to the axis, obtaining parallel surfaces also in time. HANDWHEEL of the grinding machine, supported by three bearings and engaged on the screw by means of a pair of helical gears, equipped with graduated drum, supported by a trust bearing, for a stock removal of mm 0.01 - 0.02 - 0.03 for each single pass; the rapid feed per handwheel turn is mm 2. KNOB WITH JACK, for the programmable micrometric feed of mm 0.01 - 0.02 - 0.03 - 0.04 per pulse, which allows a simple use by avoiding the constant increment control. SLOT to permit the maximum use in height of the work field of the grinding machine wheel and to clamp non-magnetic parts and accessories such as: magnetic chuck, self-centering chuck and squares. Low-voltage CONTROLS, protection, indicator light and all requisites to comply with safety and conformity regulations provided for this type of grinding machine with fixed table. HANDLES, SHAPES AND SIZES of the grinding machine with fixed table designed to meet the current ergonomic recommendations for work. WITH FOLLOWING ACCESSORIES: Magnetic chuck 300 x 150 mm Wheel flange and cup wheel Semiautomatic dresser with diamond Coolant system Operating manual in German or Italian Bedpfx Aeywcl Roktjlp

Condition: new, neu ca. 2 Wochen ab Auftragse Italien 17940 € 344.45 € Dm. 200x78x78 mm 2800 1/min 300 mm 300x150x55 mm 350x150 mm 500x160 mm 3.6 kW 1020 mm 820 mm 2170 mm 440 kg This Grinding machine with fixed table derives from the model R.V. 500 but it differs from it as it is equippedwith a long column supported by four bearings and is opportunely stiffened by a sturdy column support. This Surface grinding machine, due to its stiffness and geometrical stability, is highly suitable for grinding with precision pieces of notable height: single or mass-produced die-shop components, moulds, punches, gears and others. Moreover, the nuts of the vertical translation screw and the dowels to realign the wheel motor to the axis,equipping this model of Grinding machine with fixed table, allow preserving perfect work conditions over the years, too. CAST IRON BED to maintain the geometric stability of the grinding machine in time, too. CAST IRON COLUMN, protected by bellows and supported by four adjustable precision bearings, broadly sized for this type of grinding machine with fixed table. Three-phase MOTOR air-cooled by double jacket, to prevent the overheating of the grinding machine motorduring continuous machining and to keep the temperature of the motor shaft and of bearings constant. Hardened, ground and dynamically balanced SHAFT, supported by precision ball bearings, widely sized for this type of grinding machine with fixed table and self-adjusting by means of springs for the backlash preload, to absorb thermal expansions. VERTICAL TRANSLATION SCREW supported by opposite and adjustable ball bearings, with apt motion for maintaining, in this model of grinding machine with fixed table, the wheel work field free from hindrances and for avoiding dust depositions. Metal BELLOWS for a better protection of the vertical translation screw of the grinding machine. Opposite bronze NUTS, for the recovery of the eventual wear in time of the vertical translation screw of the grinding machine with fixed table. REGISTRATION DOWELS to re-align the wheel motor of the grinding machine to the axis, obtaining parallel surfaces also in time. HANDWHEEL of the grinding machine, supported by three bearings and engaged on the screw by means of a pair of helical gears, equipped with graduated drum, supported by a trust bearing, Bsdpoyv Iqvefx Aktolp for a stock removal of mm 0.01 - 0.02 - 0.03 for each single pass; the rapid feed per handwheel turn is mm 2. KNOB WITH JACK, for the programmable micrometric feed of mm 0.01 - 0.02 - 0.03 - 0.04 per pulse, which allows a simple use by avoiding the constant increment control. SLOT to permit the maximum use in height of the work field of the grinding machine wheel and to clamp non-magnetic parts and accessories such as: magnetic chuck, self-centering chuck and squares. Low-voltage CONTROLS, protection, indicator light and all requisites to comply with safety and conformity regulations provided for this type of grinding machine with fixed table. HANDLES, SHAPES AND SIZES of the grinding machine with fixed table designed to meet the current ergonomic recommendations for work. WITH FOLLOWING ACCESSORIES: Magnetic chuck 300 x 150 mm Wheel flange and cup wheel Semiautomatic dresser with diamond Coolant system Operating manual in German or Italian

Condition: new, Year of construction: 2026, General refurbished, as good as new machine, modernized to the legally prescribed safety standard "state of the art" according to the safety regulations of the employers' liability insurance associations. Switch cabinet electronics Installation of a new CE - control cabinet according to the current legal regulations of the professional associations BGVA 3 / DIN-EN 60204-1 new machine standard. Optionally complete machine in CE execution. A CE declaration of conformity is issued for the machine. With this FPS Werkzeugmaschinen GmbH acts as manufacturer. The machine fulfills the requirements of the BETRIEBS-SICHERHEITSVERORDNUNG- Betr.SichV. The year of manufacture corresponds to the date of delivery of the machine. EN ISO 12100, EN ISO 13857, DIN EN 13128:2009-09, EN ISO 13850, EN ISO 13849, EN 60204-1 Control system 3-axis - FPS active - digital display Bjdpjh R S Tcsfx Aktolp Speed 50 - 2500 rpm geometrically stepped direct gear with 18 speed steps for maximum torque / milling performance Feed rate 6,3 to 630 mm/min, infinitely variable rapid traverse 1,3 m/min Quill Extendable quill, vertical 60 mm SK40 with M16 tightening thread optional: with DECKEL - saw thread S20 x 2 Extendable quill, horizontal approx. 100mm Axes X/Y/Z 500/400/400 mm Table Rigid angular table 800x460mm Equipment - Vertical and horizontal spindle - Milling head manually tiltable +/- 90 °. Options - Z-axis bellows - chip tray - machine light - central lubrication - universal table - rotary table - Shaper head - dividing head - counterholder - etc.

Condition: new, Year of construction: 2026, Through our many years of experience in service, we have decided to develop and produce our own milling machines. The FPS 500M is a conventional milling machine perfect for training and production. Through the Heidenhain Positip 8016 active digital display positioning and for example the creation and approach of a bolt hole circle is possible. Control Bjdeh Su Ipspfx Aktslp Heidenhain Positip 8016 Active - Digital display Speed 0 - 3000 rpm geometrically stepped direct gear with 16 gear steps for maximum torque / milling power Feed rate 0 to 500 mm/min, infinitely variable rapid traverse 1,5 m/min quill extendable quill, vertical 80 mm SK40 optional: horizontal work spindle or horizontal quill (approx. 100mm extendable) Pulling system: hydraulic tightening system - DIN 69872 optional: DIN 2080 Axes X/Y/Z 500/400/400 mm Table Rigid angular table 800x480mm Equipment - Vertical and horizontal spindle - Milling head manually tiltable +/- 90 °. - Travelling chip tray - Machine light - Central lubrication - Z-axis bellows Options - universal table - rotary table - Shaper head - dividing head - counterholder - etc. Further technical data can be found in the attached data sheet.

Condition: new, Year of construction: 2026, Completely refurbished machine, as new, modernized to the legally prescribed "state of the art" safety standard in accordance with the safety regulations of the employers' liability insurance associations. Switch cabinet electronics Installation of a new CE - control cabinet according to the current legal regulations of the professional associations BGVA 3 / DIN-EN 60204-1 new machine standard. Optionally complete machine in CE execution. A CE declaration of conformity is issued for the machine. With this FPS Werkzeugmaschinen GmbH acts as manufacturer. The machine fulfills the requirements of the BETRIEBS-SICHERHEITSVERORDNUNG- Betr.SichV. The year of manufacture corresponds to the date of delivery of the machine. EN ISO 12100, EN ISO 13857, DIN EN 13128:2009-09, EN ISO 13850, EN ISO 13849, EN 60204-1 Control system 3-axis - FPS Active - digital display Speed 25 - 2500 rpm geometrically stepped direct gear with 18 speed steps for maximum torque / milling power Feed rate 5 to 500 mm/min, infinitely variable rapid traverse 1,2 m/min quill Extendable quill, vertical 100 mm SK40 with M16 tightening thread optional: with DECKEL - saw thread S20 x 2 Extendable quill, horizontal approx. 100mm Axes X/Y/Z 800/300/400 mm Table rigid angular table 1000x440mm, load 2000kg Equipment - Vertical and horizontal spindle Bsdpfsh Sptnox Aktjlp - Milling head manually tiltable +/- 90 °. Options - Z-axis bellows - chip tray - machine light - central lubrication - universal table - rotary table - Shaper head - dividing head - counterholder - etc.

Condition: new, Wilo CronoLine-IL 50/270-4/4-S1 Single-Stage Dry-Running Centrifugal Pump Single-stage dry-running centrifugal pump in an inline design for pipe installation or base mounting. Low-vibration and low-noise block design with lantern and a rigidly connected standard flange motor. Equipped with a forced-circulation, direction-independent bellows mechanical seal and a cavitation-reducing impeller. Flanges with pressure gauge connections R 1/8. Manufacturer: Wilo Product name: CronoLine-IL 50/270-4/4-S1 Net weight approx.: 101 kg Item number: 2171212 Operating data Min. medium temperature Tmin: -20 °C Max. medium temperature Tmax: 140 °C Min. ambient temperature Tmin: -15 °C Max. ambient temperature Tmax: 40 °C Maximum operating pressure PN: 16 bar Design note: 16 bar up to 120 °C, 13 bar up to 140 °C Minimum efficiency index (MEI): ≥0.4 Motor data Motor efficiency class: IE3 Mains connection: 3~400 V, 50 Hz Voltage tolerance: ±10 % Rated motor power P2: 4000 W Rated speed n: 1450 1/min Rated current IN: 8.2 A Power factor cos φ: 0.79 Motor efficiency ηM 50%: 85.8 % Motor efficiency ηM 75%: 87.6 % Motor efficiency ηM 100%: 88 % Insulation class: F Bedpjpgq Dkefx Aktslp Enclosure: IP55 Installation dimensions Suction-side pipe connection DNs: DN 50 Discharge-side pipe connection DNd: DN 50 Length l0: 440 mm PSH3R6Cright You can find more pumps – new and used – in our shop! International shipping costs available upon request!

Condition: new, Year of construction: 2026, machine/vehicle number: 2103 XXXXXX, The FPS 300M, heiress of the DECKEL FP1. Through our many years of experience in service, we decided to develop and produce our own milling machines. Blsdpfxjh I Nqwo Aktjp The FPS 300M is a conventional milling machine perfect for training and production. Control 3-axis - FPS Active - digital display Speed 40 - 2000 rpm geometrically stepped direct gearbox with 16 gear steps for maximum torque / milling power Feed rate 5 to 500 mm/min, infinitely variable rapid traverse 1,5 m/min quill Extendable quill, vertical 60 mm SK40 with M16 tightening thread optional: with DECKEL - saw thread S20 x 2 Axes X/Y/Z 300/160/340 mm Table Rigid angular table 600x210mm Equipment - Vertical and horizontal spindle - Milling head manually tiltable +/- 90 °. Options - Z-axis bellows - chip tray - machine light - central lubrication - universal table - rotary table - Shaper head - dividing head - counterholder - etc.

Condition: ready for operation (used), Year of construction: 2005, operating hours: 71,080 h, functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 22,000 rpm, controller model: Siemens SINUMERIK 840D, TECHNICAL DETAILS Travel in X-axis: 5,000 mm Travel in Y-axis: 3,000 mm Travel in Z-axis: 1,500 mm Max. workpiece dimensions (L × W × H): 4,000 × 2,000 × 1,000 mm Table length: 4,050 mm Bodpfozyl Azsx Aktelp Table width: 2,050 mm Table height: 500 mm Feed rate X-axis: 65 m/min Feed rate Y-axis: 65 m/min Feed rate Z-axis: 65 m/min Rapid traverse rate X-axis: 65 m/min Rapid traverse rate Y-axis: 65 m/min Rapid traverse rate Z-axis: 65 m/min Position of milling head: vertical Tool interface: HSK 63A Spindle speed: 22,000 rpm Spindle power: 30 kW Torque: 28.6 Nm Tilting axis A: ±110° Rotational range C-axis: ±182.5° Magazine capacity: 20 stations Max. tool diameter: 100 mm Max. tool weight: 6 kg MACHINE DETAILS Control system: Siemens SINUMERIK 840D Connected power: 150 kW Dimensions & Weight Dimensions (L x W x H): 8,000 x 7,500 x 6,200 mm Dimensions of control cabinet (L x W x H): 600 x 4,200 x 2,600 mm Machine weight: approx. 78,000 kg Operating hours: 71,080 h EQUIPMENT Dust extraction hood on the milling head for connection to an on-site dust extraction system NC4 laser system for contactless tool measurement and tool breakage monitoring Renishaw RMP60 wireless probe for workpiece measurement Bellows/roller covers

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 420 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 380 mm, spindle speed (max.): 2,600 rpm, spindle speed (min.): 65 rpm, quill stroke: 100 mm, total height: 1,800 mm, total width: 1,500 mm, total length: 1,200 mm, table width: 390 mm, table length: 840 mm, workpiece weight (max.): 200 kg, distance table to spindle center: 470 mm, Equipment: documentation/manual, Table surface (angle table): 390 x 840 mm Max. workpiece weight: 200 kg Travel X: 420 mm Travel Y: 220 mm Travel Z: 380 mm Quill stroke Z1: 100 mm Speed range: 65 - 2600 rpm Number of gear steps: 12 Drive power: 2.2 kW Tool taper: SK 40 (DIN 69871) Weight approx.: 1200 kg Including extensive standard accessories, among others: Working area enclosure with front doors 3-axis digital readout Hydraulic tool clamping for vertical spindle with SK-40 (DIN 69871) Double-monitored spindle guard 3 conventional handwheels Complete electrical equipment for 400 V, 50 Hz three-phase current Ball screw spindles for X, Y, and Z axes Vertical milling head Fixed angle table with 840 x 390 mm clamping area Swivel device for vertical milling head Bsdpju Nytzefx Aktslp LED machine light Protective bellows for vertical and horizontal guideways Automatic central lubrication for axes and ball screw spindles Coolant system with pump Set (4 pcs.) mounting elements

Condition: good (used), Vibration damper, compensator, damper, expansion compensator, expansion piece, bellows compensator, stainless steel compensator Bledpeyvq Iksfx Aktep -Vibration damper: Stainless steel expansion compensator bellows compensator, unused -Flange: Type HG20592 OCr18Ni9 DN 200 -Size: DN 200 -Bolt circle: Ø 295 / 22 mm -Quantity: 1x damper available -Dimensions: 390/380/H235 mm -Weight: 19.7 kg

Condition: good (used), Vibration damper, compensator, damper, expansion compensator, expansion piece, axial compensators, rubber expansion compensator, rubber compensator, rubber compensator -Manufacturer: Elaflex, rubber compensator -Type: ERV-DN65 PN16 -Nominal diameter: Ø 60 mm -Material: Bellows rubber Bodpfx Akezbhayjtelp -Bolt circle: Ø 145 / 18 mm -Number: 2x compensators available -Price: per piece -Dimensions: Ø 185 x 125 mm -Weight: 4.8 kg/pc.

Condition: good (used), Vibration damper, compensator, damper, expansion compensator, expansion piece, axial compensators, rubber expansion compensator, rubber compensator, rubber compensator -Manufacturer: Elaflex, rubber compensator -Type: ERV-DN125 PN16 -Nominal diameter: Ø 120 mm -Material: Bellows rubber Bedsza Um Rjpfx Aktelp -Bolt circle: Ø 210 / 19 mm -Number: 2x compensators available -Price: per piece -Dimensions: Ø 252 x 130 mm -Weight: 8.7 kg/pc.

Condition: good (used), Metal bellows coupling, claw coupling, connecting coupling, torsionally elastic coupling -Manufacturer: Desch, Hadeflex torsionally flexible jaw coupling -Type: FW9 -Hole shaft: Ø 32 mm -Dimensions: Ø 250 x 220 mm -Weight: 36.3 kg Blsdpfx Akjzbq Sxjtjp

Condition: good (used), Metal bellows coupling, claw coupling, connecting coupling, torsionally flexible coupling, shaft coupling, bellows coupling -Claw coupling: elastic claw coupling -Hub bore: Ø 55/40 mm -Quantity: 1x coupling available Blsdpfx Ajzzqpvektop -Dimensions: Ø 128 x 145 mm -Weight: 6.1 kg

Condition: used, Air bellows, roller bellows, air cushions -Number: 2 pieces -Manufacturer: Contitech -Type: 644 N -Package price Bedpfxeb A Tfze Aktolp -Weight: 2 kg

Condition: new, Möllerbalg 117010, bellows, unused, 100% functional, scope of delivery as shown in the photos. Bljdeztmktopfx Aktop

Condition: good (used), Metal bellows coupling, claw coupling, connecting coupling, torsionally flexible coupling, shaft coupling, bellows coupling -Manufacturer: KTR-Rotex, claw coupling type GS -Shaft: Ø 28/Ø 38 mm Blsdjfzr Ufjpfx Aktop -Price: per piece -Number: 13 piece -Dimension: Ø 65 x 88 mm -Weight: 0.6 kg/piece

Condition: new, We can deliver all spare parts for JUNG JF- und HF-series. z.B. grinding flanges, switches, bellows, refurbished grinding and transvers spindles, hydraulic pistons etc. Also equipment like magnetic chucks (new oder refurbished), dressers, filtrtion units, lubrication pumps etc. Also used parts which are discontinued by the manufacturer. Bledpfogbt U Nox Aktep Please inquire wih the exact part name.

Condition: excellent (used), Vibration damper, compensator, damper, expansion compensator, expansion piece, axial compensators, stainless steel compensator, steel expansion compensator, steel expansion joint -Manufacturer: Witzenmann, Hydra axial compensator unused -Type: ABG 01.0450.196.0 -Nominal diameter: DN 450 / Length 406 -Material: Bellows stainless steel -Bolt circle: Ø 550 / 22 mm Bljdpfxsip Eq Ij Aktop -Number: 4x dampers available -Price: per piece -Dimensions: Ø 595 x 415 mm -Weight: 40 kg/piece

Condition: excellent (used), Vibration damper, compensator, damper, expansion compensator, expansion piece, axial compensators, stainless steel compensator, steel expansion compensator, steel expansion joint -Manufacturer: Witzenmann, Hydra axial compensator unused -Type: ABG 01.0450.196.0 -Nominal diameter: DN 450 / Length 406 -Material: Bellows stainless steel -Bolt circle: Ø 575 / 22 mm -Number: 2x dampers available Bljdpfxoip Eq So Aktop -Price: per piece -Dimensions: Ø 600 x 415 mm -Weight: 40 kg/piece

Condition: good (used), Metal bellows coupling, claw coupling, connecting coupling, torsionally flexible coupling, shaft coupling -Coupling: torsionally flexible shaft coupling for splined shaft -Shaft: Ø 28 mm -Toothed shaft: Ø 30/27 mm, dimensions see photos -Number: 2x couplings available -Price: per piece Bledpfxjzld Nko Aktep -Dimensions: Ø 115 x 150 mm -Weight: 4.4 kg/piece

Condition: new, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW Cooling capacity: up to 116 kW medium: oil up to 350°C Maximum external volume: 66 ltr at 350°C max. flow rate: up to 150 l/min  max. delivery pressure: up to 8,0 bar Motor power: 2.8 or 4 kW Dimensions LxWxH: 1,414 x 503 x 1,350 mm (without connections for continuous bypass) Bljdpfx Ajg Ey Rfjktsp Weight approx. 225-320 kg Circulation medium connection: Flange DN25 PN16-40 (DIN EN 1092-1), form B1 *HIGHLIGHTS EQUIPMENT: -Regulation and control unit Smart Controller (7" Touch-Displ) -Heating control via solid-state relay -Control box IP54 -Cooling controlled via solenoid valve -Flow measurement using the differential pressure principle -Bypass between flow and return with reduced cross-section -Level monitoring by means of magnetic float switch -flow monitoring by recording the heating rod surface temperature and the flow rate -dirt filter in the cooling water supply and in the return of the circulation system -monitoring of the flow temperature by electronic safety temperature limiter -external oil filler neck -Dilo fittings on internal piping connections (except pump connections) -at 350°C: continuous bypass, including bellows valves -Connection for nitrogen blanketing with pressure gauge and safety valve 0.5 bar at 350°C (option) Visit our website for more details or for other performance classes. *Unit is compliant with European Directives. Other directives and standards are only complied with if stated in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be stated in quotations or order confirmations.

Condition: used, metal bellows coupling, claw coupling, connecting coupling, torsionally flexible coupling -Claw coupling: torsionally flexible claw coupling -Type: KS 7 -Bore: Ø 19 mm Blsdpfjuzn E Aox Aktop -Total dimensions: Ø 69 x 68 mm -Weight: 1.0 kg

Condition: excellent (used), Vibration damper, compensator, damper, expansion compensator, expansion piece, axial compensators, stainless steel compensator, steel expansion compensator, steel expansion joint -Manufacturer: SB Broneske, compensator unused -Type: SBF25.100 -Nominal diameter: Ø 270 mm -Material: Bellows stainless steel Bodpfx Aeip Rb Roktslp -Bolt circle: Ø 335 / 18 mm -Dimensions: Ø 375 x 260 mm -Weight: 15 kg